Counting matching models…
This is Perry the platypus, a beloved crime fighting, egg laying, mammal of action that, doesn't do much. The moment I got a 3d printer I went searching for a Perry the Platypus model and turned up empty handed, so now after learning my…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
Version 2, fixed issues with the design and should be considerably more printer friendly. This is a highly detailed model, recommend the 1.0 or lower layer height and support blocks in the mast otherwise it is near impossible to clean out…
Update 05.01.2025: I finally got around to learn a little T-spline modelling. So here's Perry's fedora! The hat fits the body with his hair attached. --- Update 17.11.2024: Added a new version, that has another hole on top of the head to…
Agent P aka -Perry the Platypus from Phineas and Ferb
I know it's half-assed, but it had to be made lol
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Where's Perry? Right here – ready to print! This is a…
Perry the platypus – Agent P from Phineas and Ferb cartoon. Files: body hat ** nose left_hand right_hand left_leg right_leg tail right_eye – outer (biggest) white part of a right eye right_eye (1) – inner (middle) black part of a right…
3D MODEL DESCRIPTION This is a tender and cuddle Perry The Platypus model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a…
Funko Perry the Platypus (Phineas and Ferb)
Meet Perry and Pedro Pencil. They're part of the Print A Toon family, here to bring joy back to writing and drawing. Just fun models for your kids. Please note these prints are not MMU. They print in parts in the appropriate colour's and…
PERRY THE PLATAPUS -Phineas and Ferb - WALL ART
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech E3 Mini Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm to join…
Case for Pi4 and Hyperpixel4
Perry the Platypus – 3D Sculpture 3D sculpture of Perry the Platypus, based on the character from Phineas and Ferb . The model is in a neutral pose and designed as a solid, one-piece mesh suitable for 3D printing. Exported in STL format.…
i wanted a perry the platypus pumpkin last year so i made these fedora was originally made by: The_Dark_Knight | i remixed it for a flat bottom so that i could easily glue it on. V2 has pegs - V3 does not feet and bill were originally…
From German Sci-Fi Novel Series Perry Rhodan a Space Jet made two Versions of the Top, one Solid and one for a visible
Organize your desk/nightstand and keep your glasses safe with this Perry the Platypus eyeglasses holder! Inspired by the beloved secret agent, this 3D-printed holder is designed to hold most eyeglasses and sunglasses securely on Perry's…
This print goes along with this tik tok that I made (Noticed by Dan Povenmire himself) https://www.tiktok.com/@zach_rodgers12/video/7204217058396048683 I've been planning on doing this print for a while. I now own my very own Perry the…
Update: 15.05.2020 uploaded the f3d Fusion file Designed this frame for my rpi-magicmirror-eink project. It uses a Raspberry Pi Zero and 7.5 eInk Display from Waveshare* , to create a small low energy MagicMirror . You can find a detailed…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre He may look like a regular platypus, but don’t be…
I added a Pi Case to it so you can hide the octopi and it looks clean. I did not find any Remix with Case for Pi4 that was easy to print so i took this two designs and merged them. I also added some holes for ventilation between them. I…
A simple modell of Perry the platypus.
A fun 3D printable cartoon platypus figure inspired by classic secret-agent characters. The model features a teal body, orange duckbill, webbed feet, a beaver-like tail, and a brown spy hat. Perfect as a desk decoration, collectible…
its just that.. a cookiecutter of perry the platypus.
Rock Bands - Aerosmith - Joe Perry 3D printable model.
Gehäuse und Deckel haben verschiedene Ausführungen, je nach belieben. Bei Montage am Mk3s Rahmen: Gehäuse an Rahmen schrauben Pi schräg an Schrauben vorbeiführen → WICHTIG ERST MICRO SD EINSTECKEN NACH MONTAGE
No specific print instructions, supports not needed.
I needed a wall mount for a Pi camera. This is a mount that allows pivoting around the Z axis. I designed it around #8 wood screws for attaching to the wall, and an M4x20mm bolt and nut for the pivot. Category: Computer
PERRY THE PLATAPUS 2-Phineas and Ferb - WALL ART
A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…
Puedes editar para que tenga un ojo más definido. Este diseño está elaborado para que se imprima por capas para faclilidad y menor gasto de material. Utiliza el siguiente orden para capas de 0.4mm: Marmol (Color que prefieras para la…
Dies ist ein einfacher Standfuß für Raumschiff SOL aus Perry Rhodan. Das Modell ist von Revell und hat die Nummer 04851. Als Schrauben habe ich M3 x 40 mm verwendet. Es ist ein bisschen tricky die Länge der Schrauben richtig einzustellen,…
All parts are printed separately for ease of printing and painting and slot together. (I recommend not gluing the hat to confuse certain scientists)
PERRY THE PLATAPUS!!!!!!!
Paramatrisable SCAD file Made for my wife :) Print instructions Category: Organization
boxy perry, a platypus. parts fit together, but very fragile.
Tyler Perry's Madea - Mabel Earlene Simmons - 2005 3D printable model.
This guy stole the show and went viral at a Katy Perry show. I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech SKR 1.4/1.4 Turbo Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm…
This mount contains a Raspberry Pi 2/3/4 Mount and a place for a SSD or slim HDD below the PI. I used M2.5 screws to hold the PI in place and printed the model with the top side down on the bed. On the four legs, there are holes to mount…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com 🟠 Rate, like & comment on Printables Recommended Print Settings: • Layer height: 0.16 mm • Line width: ≤ 0.35 mm • Detect thin walls: Enabled • Speed: Slow to…
In stock form the Argon Poly+ for the Pi5 comes with a very restrictive Lid. Its allowing air in but no air out. If the stock pi5 cooler is used the cooler is basically cycling its own air. To fix that i created this mod. For those who…
This is an awesome Tower for Raspberry Pi. - The design is adapted for original Metal case for Raspberry Pi 3-4 - You can put one or two harddrives in the bottom of the tower. - Unlimited height (I have 5) - All in one place
Print in PET-G. Holes are supposed to be tight with the standoffs. I can upload a looser one upon request. UPDATE 01/02/2025: Added STEP and Solidworks Maker (2025) files.
A platypus? PERRY THE PLATYPUS! Fighting your nemesis? Need some help? AgentP is happy to help. Print Perry the platypus to watch over your kicthen, bedroom or livingroom.
Recording Artists - Steve Perry
A pump badge for the MasterLiquid Atmos AIO with Agent P on top of it, you have to glue the 2 parts together, they already have pegs to connect to eachother. You need supports to print the left arm, the mouth and the hat of Perry,.
Say hello to Articulated Companion: Perry the Pear — your bouncy, bendy-limbed fruit buddy, bursting with charm and ready to strut into your next animation or game! With his lovable pear-shaped body and fully flexi legs, Perry is built…
A seemingly simple, unassuming platypus without a thought in the world behind those eyes... but wait! Once he dons the fedora, his eyes straighten out, his tail perks up! Perry prints in 44 pieces. Most of the exterior pieces are designed…
Eine Büste von Perry Rhodan. Eventuell muss sie im Slicer vergrößert und am besten noch mit dem Hals zum Boden gedreht werden
A door stopper with Agent P on top of it, you have to glue the 2 parts together, they already have pegs to connect to eachother. You need supports to print the left arm, the mouth and the hat of Perry.
I use my Raspberry Pi Zero W's headless. I don't need access to any ports other than to get power to the computer and GP
It does nothing, even when you put tissue paper on its back. (some assembly required and adjust the model as per tissue box size as all boxes are not same)
This is a portable WINLINK© client with PAT (a cross-platform Winlink client written in Go). The device is designed for pick up a Raspberry Zero WH Software instruction: see atteched documents Software_Installation_Instruction (GER) Part…
USE SUPPORTS… DON'T RUIN THE PRINT
Thanks to Maurice Kevenaar for create the box for rasperry pi + hiperpixel 40 . It fits perfectly.
Camera accessory mount for Creality Ender-3 V3 SE. You can attach GoPro (and similar) accessories to the mount. Mount also holds Raspberry Pi 4 case. I use it to attach @Geek5D's Raspberry Pi Camera case (with a Raspberry Pi V2 camera) to…
hope you like him Category: Sculptures
Espero que les guste :). Pueden imprimir con los parámetros que gusten. Y si lo imprimen me encantaría verlo!!
A case for a Raspberry Pi 4 with and without a hole for a fan (Specifically a Delta Electronics FFB0412SHN DC Brushless Fan) Works with no Supports I printed it on an Ender 3 v2 Used tape to make sure it doesn't come apart and keep the…
I made this realistic perry the platypus
Pegboard Hook for Sperry Outlet Tester. Needs supports to print correctly.
The pi mount was designed for a simple NAS system based on a PI4 and this Dual HDD/SSD case. The case has an integrated RAID controller, so one drive gets mirrored with out the knowledge of the Raspberry PI and prevent data loss through a…
Pegboard Hook for Sperry Voltage Tester. Needs supports to print correctly.
I needed a sleek, modern-looking case for a 10" touch display, but couldn't find one, so I designed my own. This case includes a fan mount, cooling ports, a stand, a monitor arm and extra internal space for future components. Update:…
BDUAV gimbal motor (the top one) is discontinued as far as we can tell :( Description Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source…
This is an Electronics front enclosure for Ender 3 V2, it is designed to fit: Bigtreetech SKR 2 Raspberry Pi Zero 2 1x Noctua Fan 92x10 Needs the feet extensions already installed. For specific to the parts I had available and the limited…
Used to mount all PCBs together and allow for an upright position. Raspberry Pi 3B+ Raspberry Pi PoE Hat CSI-to-HDMI Adapter Modifications needed: Drill out holes of CSI Adapter to 2.5mm Mounting Hardware needed: 4x M2.5x10 (Bottom 4…
This modification does not require permanant modification of your printer This modification requires electrical work, consult an electrician to inspect before usage Your warranty will be voided as well. Parts Required: Btt SKR mini e3…
Boîtier Rasperry Pi 5 avec fixation murale et avec intégration pour ventilateur A4 10x40
Caricature Figurine – Perry Bamonte This figurine offers a clean and stylized caricature of Perry Bamonte. Standing with hands in his pockets , the pose is simple and relaxed, capturing a calm and recognizable presence. The slightly…
Use case I made this housing for the RaspberryPi Zero 2W to act as a camera for PrusaConnect inside my new Prusa CoreOne. I am still working on the way to mount it inside the printer, but the housing itself seems to be worth publishing…
I have two Sperry outlet testers, but the lens broke and I could not find replacements. This model is a replacement lens. Use a transparent filament. All I had was a transparent blue PLA, but it seems to work just fine.
A 2-Components part to cover your Rasperry Pi Camera. Perfect for Timelapse oder Octlapse use on 3d Printers
A necklace?! Perry the necklace?! Print your own Perry the Platypus necklace! This 1 in diameter necklace was perfect for my kids. We bought some necklace string and made cheap dress-up necklaces. Enjoy! Always love to see makes!…
Boîtier Rasperry Pi 4 Model B avec fixation murale et avec intégration pour ventilateur A4 10x40
Some cruise ships require insertion of the room key to turn on light and AC. This card gives the card some style. Allows you to avoid forgetting your room key in the light switch. Printed with PLA. Card is Polymaker Teal PLA and the…
Mathew Perry Hueforge Painting No need for an AMS, Just change color at layer. Both STL and Bambu Studio profile is uploaded. Any of my 200 x 200 Frames can be used. Just glue them together. Colors used These are the colors I used, not…
P-Touch P700 Print Server On Linux, the software support for P-Touch printers is quite limited. There is a quite useful command line tool called ptouch-print ( https://dominic.familie-radermacher.ch/projekte/ptouch-print/ ). But, if you…
Should print at 150% for optimal size
A quick model that can be turned into a pin. I made this for a school project but here you go.
Contenitore per il mio progetto di termostato ambiente con box per il DHT22 con schermo touch da 5 pollici. Enclosure for my room thermostat project with box for the DHT22 with 5 inch touch screen.
this is a raspberry pi 3b at 150% scale
I designed a holder for my Raspberry Pi 3 to attach it to an Ikea cabin. I put som M5 bolts in the pre drilled holes to attach the holder. 4 M3 Hex nuts has to be added. In my case they have a tight fit but you can also clue them in.
Din mount for snap together case
this is a basic case for a raspberry pi 4 model b with fan in it
I liked the clever snap fit design of "PDor_Projects" but wanted to use a CSI HDMI Adapter in that housing.
Remixed it for people who like me have the small holes on the right side. Only needs the one part, the original requires 2. Print with supports. Update: Added one for the bigger hole on the right. I haven't tested this as mine is on the…
Pair of brackets to attach a Pi 7" screen to the upper front of the U2 frame. These will fit any derivative of the Ultimaker 2 series. Category: 3D Printer Accessories
