137 models
Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 3A+. There are 3 types of top covers. Slot-in I/O cover type for fans. Cut-out I/O cover type for fans. Cut-out I/O cover type for heat sink.…
With this bottom of the case you have the possibility to screw your Raspberry Pi 3 to a wall with M3 countersunk screws. The case bottom is compatible with any of the tops from Malolo‘s screw-less / snap fit Raspberry Pi 3 B Case &…
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…
my version of a mini nes. holds pi3 model B. id ask, if anyone makes this, please post as "made" id like to see it. EDIT!!!! i fixed top ventilation with "v2" :) let me know if any more changes need to be made updated again to v4!!! id…
This supporting frame is for Zero4U 4-port USB hub sitting on a RPi3A. It contains holes for underneath pegs (version for RPiA/B without pegs is also available, but this is universal) and pockets for protruding usb sockets solderings.…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
Bastion mods: -btt octopus mount with and without mosfet mount -cables and ptfe (M6 coupler) relief -PSU cover with and without charger mount (for Rpi) -5 inch screen mount -Rpi3 mount -bastion logo diffuser for dragonburner I also…
Simple hanging mount for raspberry pi, prints in about 70 minutes on a Prusa Mk4.
This case mount is a remix of the popular Rpi3b/b+ case by 0110-M-P. Other mounts I found used less ideal cases, and the mounting method wasn't the strongest. This version has all the great features of the original popular case, with an…
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
Needed a low profile, no-frills case for a project I was working on and found adamwdraper's nice deisgn. I only had M2 or M3 hardware and his called for M2.5 so simply remixed to use the M2x16 hardware I had on hand. I also added the…
This is a remix of the model I made for Raspberry Pi 5, but I modified it to fit Raspberry Pi 3.
Summary Since the pins used in the original design are only available from big distributors (DigiKey, Mouser, ...) Shipping costs 20€. Stackable Pin Headers can be found much more often and are therefore more affordable. Additional Parts…
This simple holder snugly holds my MT32-Pi Hat and a PiA3+ ( in Geekworm Aluminium case ) It can stand alone or can be sat atop this Tapto Card Reader Print at whatever resolution you want , though i reccommend at least 0.2mm for a smooth…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
Bastion mods: -btt octopus mount with and without mosfet mount -cables and ptfe (M6 coupler) relief -PSU cover with and without charger mount (for Rpi) -5 inch screen mount -Rpi3 mount -bastion logo diffuser for dragonburner I also…
Enclosure for the SBC Sipeed Longan Pi 3H Hardware needed: 4x M2.5 x 5 or 7mm
The base that connects to the shed is the same. I reinforced the dish area and unified the hooks as well as extended them. This allows it to firmly grasp a raspberry pi 3B in an aluminum case. Any 28mm raspberry Pi case should fit in…
After needing and not being able to find a model file of a pi3 b+ I made my own. There were a few out there, but things like the holes and ports were not accurate in their positions. This one should be correct for designing things like…
Low profile Case for Raspberry Pi3B and B+ It allows easy access to the GPIOs, 15mmx15mm heatsink Hardware needed: 4x M2.5x6mm screws to secure the board to the bottom case 8x 6mmx3mm circular magnets
Maturity: Very Good. 7 prototypes. In use since 2025/05. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount. 2x M3 DIN 562 square nuts 2x M3x10 (length 10mm minium) ISO7380 or ISO4762 screws Insert the 2 M3 screws instead of…
Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
This model helped make a great Raspberry Pi computer, but it didn't have any slots for a camera, but now it does. Credit to kaisaranton for the original model. https://www.printables.com/@kaisarantonn
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
A Witty Pi3 version 1 component from UUGEAR for the Raspberry Pi in step format for use in your own designs.
Plate for mounting an autolevel inductive sensor on a CTC PI3 Pro B . The sensor is an inductive probe SN04-N . You will need to mod the GT2560 motherboard to connect it to the sensor. Put a male pin on the 5v pad, and solder right angle…
I modified hackoholic version for adapt it to Original Prusa Mk3 and the Raspberry Pi 3 B. I'm using it with Raspberry Pi 3 B+ and Prusa MK3. It should be compatible with Raspberry Pi 2, Rapsberry Pi 3 B and also Prusa Mk2s. The screws…
I'll start by saying I've yet to confirm whether this fits the TLM printer. I don't know if this will work with the original Box that came with the TLM. The board carriage may be too long. I made this from scratch using FreeCAD. I've…
Strange artifacts and a hole appeared when I sliced the original file by gminor in Simplify3D so I ran it through Tinkercad and filled the low spot Category: 3D Printer Accessories
wanted to use the Electronics tower for my modified prusawire, since i didnt have any space under my bed since i started from a MK3 i didnt have the xbuddy box and decided to make one that is compatible and printable, plus some…
I redraw this case to use the small 2.5 x 2.5 mm fan.
Zaribo Raspberry Pi Einsy Rambo Mount. Please see the blog post below for the assembly tutorial. Assembly Tutorial
Raspberry PI 3 add-on panel for the 2U Starter Blank Panels. Hardware needed. 4 x 90760A005 (Comes in a package of 100) https://www.mcmaster.com/90760A005/ 4 x 95868A255 (Comes in a package of 100)…
Originally designed to mount to a Zaribo electronics box, altered to use heatsets. You will need M2.5 heatsets though. And honestly this will mount to anything flat so very flexbile. You can ping me if you want me to make different holes…
I personally love the design and look of the PETG V0 Pi 3 case that Prusa created to showcase their PETG V0 filament. As I work through a storage system for my printers and accessories, I want to standardize the attachment points for…
Was building another E3Pro and needed a spot to mount the U2C I was using. Added a USB-C port and mounting for U2C.
This is a bracket to mount Sachingm's, "Raspberry Pi 3 - case," to the Prusa i3 MK2. https://www.thingiverse.com/thing:2413372 It is for the Raspberry Pi 3 model B, but as you can see from the photos, the board and wiring are not…
I made this remix to use Ruthex heat inserts, M3 for Rambo and Cover, M2,5 for RPi. The cover is redesigned to use Socket screws instead of Flat heads. You should use all the additional parts from the original. I didn't printed the parts…
The case for the RPi3B is - from my other project https://www.printables.com/model/1601936-5-inch-dsi-lcd-display-raspbe Two M5x25 screw Printing suggestions: Materials: PLA, PETG Layer height: 0.2mm Infill: 25% Support: None
Hi, I recently tried the https://www.pandapi3d.com/bdsensor project out and was stuck trying to find a suitable place for the sensor as my Stealthburner is using a custom TAP mounting mechanism. I figured I'd share the mounting option I…
La version imprimée en photo est légèrement différente de la version téléchargeable. J'ai fait quelques améliorations pour vous proposer quelque chose de propre.
Needs 4 pcs 608 bearings 4 pcs M3 X 25 mm bolts 4 pcs M3 nyloc nuts Category: 3D Printer Accessories
A case with 40mm fan for the Raspberry 3 or 4 with a Waveshare 5Inch DSI LCD touch screen. Ein Gehäuse mit 40mm Lüfter für den Raspberry 3 oder 4 mit einen Waveshare 5Inch DSI LCD Touch Screen. Print Settings Printer Brand: Anycubic…
Updated: Reloaded .stl file. Original was exported using inches instead of metric making the model super tiny. Corrected the .stl file export in metric for correct model sizing. Also refined the .3mf model to smooth out the model…
Case is designed for a RPI3 and Nextion 3.5 inch screen. Swivel screen with adjustable screen angle. Designed for a 30mm fan. Category: Electronics
Designed to fit a Raspberry Pi 3b and a mmdvm single hotspot. Hole for a 30mm fan on one side. Air vents keep the rpi running at about 35C in my set up. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
This is a mount for a Raspberry Pi and a 26x50mm relais for a JGAurora A5 (but it's really generic, as it's a screw based mount for a flat surface). The idea is that the Pi controls the controller board's power using the relais. Warning:…
There wasn't a case for the Allo Boss Dac board so I remixed my favorite Hifiberry case. The Allo Boss has an optional USB C power port that is blocked in this case. As long as the jumper next to it is on you can power your DAC from the…
I needed a mount for my printers screen ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ), so I modified an existing 2020/3030 extrusion mount to suite my needs. Remixed From: Raspberry Pi3 2020/3030 Extrusion Mount (…
13.12.2019 UPDATE: Door issues Fixed! But still WIP now... BASIC INFO *Multicolor Einsy box without the need to have MMU . You can design your own box & doors patterns or make them changeable... (You do not need to glue it!) ASSEMBLY TIPS…
The thing calls for m3 screws that screw into the bottom case, well the holes for the pi3 are too small and I didn't want to force it. So I added room for m2.5 nuts and screws. I also reuploaded the top case for convenience. That way you…
This is a cover for the raspberry pi 4 with touch screen MPI3508 (3.5 inch HDMI) Print in 2 parts: bottom (no support) top (with a hole to hang or a honeycomb) (small support for the holes) Optional parts: fan connection (with 2 or 4 snap…
This is a remix of the fantastic CR10 Sidebar cover created by Peter Solomon ( https://www.thingiverse.com/psdesign ) and the tall Pi case by Walter ( https://www.thingiverse.com/walter ). This version includes a case for the Pi3 with all…
Remix of Chris D's design with extra clearance for the power cable for a Raspberry Pi 3
Install a Raspberry Pi3A+ instead of an underpowered ZeroW! No soldering required! PrusaPrint download for Pi3 included! Print instructions This Raspberry Pi3A+ mount consists of a bracket, a tweaked Einsy base enclosure, and an external…
Let me start to thank user 0110-M-P from Thingiverse for sharing his work in Thingiverse: https://www.thingiverse.com/thing:922740 I remixed his great job to obtain following results: active cooling with Noctua 40x10 5V fan less possible…
update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…
Finally ready for release, here is the "final" version of my full Super GPi Cart. I've created an instructables article for full details so I will be somewhat sparse on instructions and info here. If you want a full walk-through go to…
This is my prototype cart / PCB holder for my attempt to get the RetroFlag GPi Case to use a Pi3 A+. This is not a permanent solution but for prototyping this makes it much easier to slot the Pi in there. I keep making updates to this on…
You need 4x 12x2mm magnets and 2x countersink M3 screws. Don't forget to add a print pause to insert the magnets into the mount.
I've completely overdesigned this model to: make it easier removable from the base I wanted to have a sturdy design without backless, therefor made the screwless design in a screwfull design To have female pins for the Pi to minimize…
Bracket is designed to be used with 33mm DIN rail clips and mounting on DIN rail. Can fit other mounting styles as well. Print settings These are the recommended settings. Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill…
This project is a my new DMR hotspot with DVmega Raspberry Pi3 and the 3800mAh battery for Rpi3 and OLED 128x64 screen. I use Blender for designing the case in 3 parts (bottom , middle and top). The OLED screen is soldered on the top of…
Case for a Raspberry Pi3b in the shape of a Festool Sys1 Case. Place for 40mm fan and 2 buttons (optional). They are separt objects in the base 3mf
I modified the Rpi3b Prusa Mk3 Mk3s Frame Mount Case form 3D_Dynamics. I have used the case he based his design on on my old printer and the rpi would run a little hot sometimes. And I wanted it to look more like the Einsy case of the…
UPDATE I made an accompanying LCD cover, which can be found here: https://www.thingiverse.com/thing:5824152 This is exactly bawesome's remix but I just removed the pi cam thing on the side and ribbon slot since I already had a webcam…
Here is a Star Wars Remix PI3 case. I did not use any supports and printed out with 100% infill. Category: Electronics
Can't Wait to find an Affordable Raspberry Pi, so Trying out the OrangePi3 LTS. Thanks to Paul Paukstelis's document on Github: https://github.com/paukstelis/octoprint_deploy This is easier than ever. So now I just needed a suitable case.…
This is a crane I designed for holding a camera/phone on top of a Prusa I3 mk3/s. The files come included with all on one plate(Whole part.stl) Only the crane (Crane.stl) and the angled support. The parts you see for holding the phone are…
Just a quick remix of eoyilmaz's Ender3 pi enclosure with an undermounted 30mm fan I had for the pi. Bringing the cool air in from the gap underneath will helps to keep the whole enclosure a little cooler! Added version for using a…
Simple case for the Raspberry Pi 3 Model B As usual I've attached the Fusion 360 file to make adjustments easier for you. You will also find a factory file with the settings from my Prusa MKS2 and ASA from rigid ink. Transferring older…
I measured the circuit board and designed it in the program in order to be able to make a housing for myself. I hope someone else can use it. Category: 3D Printing
This print is for those who are looking to install octoprint onto the device and are looking for an all-in-one device to enclose their Raspberry Pi3 or Pi4 and Buck Converter for the Prusa i3 Mk3/s/+. This design is specific to this…
Raspberry Pi3B+ Gehäuse Optimierung Befestigung an der Seite MK3s Print instructions MK3S Upgrade auf Octopi & einen Raspberry Pi3 B+ 1.Gehäuse drucken Gehäuse wurden für eine seitliche Montage optimiert In der 3mf wurde in Modifizierer…
This is a remix of the raspberry pi3 case, originally designed by Joe and remixed by Wilts01 to enable bottom mount. Thanks to all original creators! Changes in remix: Remove the side mount, the side wall is flat again Added 4 bottom…
Just designed this case with fan and switch for my Octoprint server on a RPI3B on my MK3s Bear. There is a hole in the bottom where you could wire the Pi directly to an Einsy board, or you can simply wire the pi via USB and Power. Fan is…
A case for the raspberry pi 3 and a 4 channel relay module. I use it for Octoprint.
Update: Febuary 10th 2022, added a setting to print the original case and stl without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
Licantrop's remix for the Bear Upgrade is great but I needed it to work with T slot 2020 extrusion for my custom printer and M3 bolts because who really has a bunch of M2.5 laying around. Since this is for T-slot you do need a wee bit of…
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
I saw a similar model from another user, but not as expandable, so made this to hold P4b or P3b for as many as you have.
You can fit Pi Zero, Zero 2W, Hats, and Pi3A, interlocking as many as you want. Also made a simple tray for Pi Zero with hats connected
Boitier "jeedom" à base de Raspberry Pi 3B+ et carte X850 V3.1 pour support SSD. J'ai adapté le boitier depuis le super modèle https://www.thingiverse.com/thing:922740 Nécessite 4 vis M3*30mm
This is a remix of 2 great designs. https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b and https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools Needed to use my “old” Raspi3…
A bracket to mount the Pi 3B on a bottom panel on the Rook 2020 MK1. The m2.5 screws are threaded in the plastic. The bottom plate needs heat inserts to fasten the bracket. added the .STP file so you can easily mod it to any other pi.
![[MK3S+] Big Einsy enclosure with RPi3/4](https://media.printables.com/media/prints/162987/images/1515455_d1f4131e-ef27-4cd4-9214-131583abd563/enclosure-kpl.jpg)
