Counting matching models…
edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
A slight remix of PerryT's wonderful Elliptical Gear set. I liked playing around with the gears connected at the off-cen
Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid
Description The ZeroPivot Protractor revolutionizes angle measurement and drawing with its innovative swinging arm design. This unique feature allows for quick and precise angle creation in a single, fluid motion, eliminating the need for…
I needed a rod end for a build I am doing. I didn't have spare rod ends so designed a 3d printed version that has held up extremely well for my application. The pivot ball is print-in-place so you don't need to pop them in. Step file is…
Podtácek pod sklenici piva
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
I couldn't find the correct barrel nut so i made my own! this is not a perfect solution, but I was able to get a good hold on a 16mm barrel using a kit of nuts and screws I had from a previous project (https://a.co/d/hldKSm2 ) Hardware…
Inspired by some of the other Posts i wanted to design a Zen-Garden with multiple Levels, Ying-Yang and the Ability to change the Apperance without having to redo everything. The Design is fairly easy. 3 Trays for Sand, Stone, Water or…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
Update March 6. 2023 I've had to remove the original STL, as someone startet to sell my designs on Ebay, even it was clearly stated as NonCommercial and ShareAlike. This post remains for inspiration and I'm not interested to share my…
I wanted to use my vacuum cleaner for a simple dust extraction. I bought 4 meters of the cheapest vacuum hose and created this adapter to make it fit into my saw. The key feature of this adapter is an ability for the hose to pivot freely…
This mod fixes the dpad issues on early Raion controllers. You install it inside the controller similar to the mod shown in this video (not my video)
Inspired by Technidyne`s oiler I have produced this thing to oil certain types of filament and for when I want to purge\clean the heating chamber. The pivot allows the bucket more movement when the X carriage is traversing. 1.The mounting…
The 4 prong side holds ID securely (photo ID or RF ID). The 2 prong side provides easy access to a removable smart card.
This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones. The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
Flexible Hinge Pivot Joint Connector For V-Slot Profile 2020
Meet The Rockhopper Make both yourself and your workflow at least 300% cooler with the Rockhopper, a durable, totally printable, ultra refined balisong utility knife that takes standard Stanley style blades. Those boxes and packages will…
This CNC wedge clamp pivots around the base bolt to allow for side or angled side pressure. I printed it with Polycarbonate reinforced with Carbon Fiber. Any strong filament should work.
More designs for building with 2020 extrusion A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I designed it for introducing odd angles into 2020…
Hi, the pin in my Crocs strap (or a similar one, as it was ordered from China) broke. I decided to design this part, trying to stay as close as possible to the original design and its "click!" function. This is not a 1:1 version; I…
This is a 20mm-150mm circle drawing template. It utilizes a standard 608-sized skate bearing. I've included both the .STL & DXF for 3D Printing or Laser Cutting. Print with 3-5 shells maximum. Recommended Skate Bearings: Black And Red…
This is fully flippable balisong knife with bushing and zen pinless design. Weight of printed parts - cca 40 grams, with aditional wight in handles 50 grams. Lenght of whole opened knife is 257mm and closed 145mm. needed parts: blade - 1x…
Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…
This is a remix of KYZ's Hinge. I made the counterpart of the hinge look like the same as the main part so in my eyes the whole looks a little bit cleaner and equal on both sides. I also changed the pivot to M3 screw and optionally you…
I needed a mount for my StarLink antenna that I could adjust to the angle that I needed for my roof. I also wanted it to be sturdy and robust for peace of mind. I have printed in PETG but if you have good success with ABS, I would suggest…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas vicko na plechovku od energetaku, nebo piva aby se k hrdlu nedostaly nečistoty a spina. Do lesa, na vylet idealni.…
These are a life saver when trying to get that detent, spring, and pivot pin installed. I have uploaded this model to save to come back to as I would like to remix one to work with the ar10. please give a like if you download. thank you.
I printed mine in PLA with following settings: 0,20 - quality preset 4 Perimeters 5 Massive top and bottom layers and 25% Kubic infill
Minor change following a suggestion from @Ckobar to increase the holes for the roller pins to 5mm to allow more pivot of the bogie. Be sure to print the main plate for the MK4 from here:…
Use brace_playseat_normal_xxx.stl when using the default brake pedal mounting or use brace_playseat_xxx.stl in combination with the ClubSport Pedals V3 aluminum extrusion mount. More information:…
Víčko na plechovku 0,5l od piva proti hmyzu. “Vicko pivni plechovky volnejsi.stl” je na plechovce trosku volnější a lépe se opakovaně sundává.
Summary Cross-axis flexure pivots are created by crossing flexures and connecting them with rigid segments at their ends, allowing the opposite ends to rotate relative to each other. Cross-axis flexure pivots can replace pin joints in…
AC Sparta Praha víčko na plechovku od piva atd. AC Sparta Prague beer can lid etc.
I had an issue where my links kept falling off the pivot ball so I took some inspiration from my injora shocks and added a flat side that keeps the links from falling off. Category: R/C Vehicles
another wiper pivot replacement design. two piece for prints without support.
Simple beer gingerbread cutter. Gcode for Mini+ 0,4mm nozzle, 0,2mm layer (speed) PLA. (37 minutes). TIP for printing: The last layer is incomplete (even when the original model has constant width of the wall there, maybe it happened…
Esta é uma capivara articulada projetada para impressão 3D, composta por peças móveis que não requerem montagem com parafusos ou colas. É perfeita como item decorativo, brinquedo ou presente para amantes de capivaras! Instruções de…
Don't tighten too hard or you will compress the ptfe tube. Use a small brim on the coupler to keep it from coming loose.
A simple door retainer for when there is insufficient room under the door for a door wedge. All parts snap together. The screw covers snapped in for me but if loose then cyano-gel is your friend. Offset from the skirting is enough to…
Trimui Model S / Powkiddy A66 cap to enhance your d-pad experience ! If you are used to Gameboy and other similar "rolling" d-pad device, you may have notice false inputs using this device as the d-pad lay on a all-flexible support and…
Printed on Anycubic Kobra 2, PLA Tough, 30% infill, no brim, no supports, with logo against plate (upside down). The logo part could perhaps use supports for a nicer finish. But you can print safely without supports. I've also included a…
This simple toilet paper holder prints in place on a flat side on the arm to give a working part right off the print bed with no supports or assembly! The part can be mirrored to load from either side. Design inspired by @gazzaladra in…
This is a mount for the BigTreeTech Smart Filament Sensor V2.0 to attach it to an aluminum extrusion. It uses a 608 bearing to pivot, reducing drag, lateral tension on the extruder, and possible rubbing against cables and other parts.…
Couple of updates: (1) I've replaced my original model with a new version that provides some additional clearances where it clips onto the washer rack bars. I also increased the wall thickness around those clips and added improved ribs…
Hello again, Alright... what a saga this project has been. It probably should have been the V-22 given how many revisions needed to be made and how much of a headache it became. If you have already downloaded it, I apologize - the…
Full credit: this remix is based on a Brigham Young University Compliant Mechanisms Research (BYU_CMR) Group design posted on Thingiverse. Check out their user page on Thingiverse for other great compliant mechanisms. I remixed the design…
Fun Pivot Fidget Toy. It requires five 5x1 magnets A little bit of underextrusion (mine is obviously too much) is better than a little bit of overextrusion for smooth gliding It's very small so it's great if a spool is almost empty. It's…
Use low layer height and flexible material, You can use brim. Tested PLA 0.15mm, brim, filament need cca 3.5m.
I was realigning my derailleur hanger the other day after crashing over a curb when I remembered what a pain it is to swing my Park Tools DAG-2 hanger alignment gauge past the stays, especially since my o-rings fell off long ago. I…
this design is almost the same as the one I did for the FGC9. and looks a lot like the Magazine Catch Pivot Lock on the MKII. but this got a angle like I did before so it removes sharp angles. not a big deal but in case for those who like…
I have the Sanji figurine that always falls off its base because the pivots it fits on are small. I redesigned the base with the pins bigger so that the action figure had a better grip on them.
This is a tall slanted humbucker ring for an archtop guitar with a 2 hole pivot / tilt adjustment. (Hard to find in the wild)
This is a replacement wiper arm pivot cover for the first gen Mitsubishi Montero/Pajero, and Dodge Raider. Made to be a replacement for Mitsubishi p/n MB623853.
Travel case meant to hold all accessories you may need for your pivot. Magnetic lid for slim design. Used PETG as it was already loaded on the printer. Can hold Puffco Pivot 15ml dropper bottle for Iso 5ml Concentrate Jar Q tips Dab Tool…
Pivote giratorio para guia de filamento__ Swivel_Guide De facil colocacion, sin herramientas, sin tornillos, con 3 modelos, ajustado para impresion rapida, amplio giro, baja resistencia alta durabilidad. impresora: cualquiera material:…
Compatibility This exact mount was made for Samsung SWA 9100S but I think it will fit most of speakers with a screw hook as seen on the picture. If you are not happy with the stock Base, there is a STEP file where you can modify the base…
For multiple bikes I wanted it to be able to pivot towards the wall, so I made a simple hinge fitting the MTB wall mount The rear tire could need a support againts slipping against the wall. That is what the third model is for…
Remix of Samuel Moor's phone mount for BMW E46. The Pivot Ball is now removable, fastened with a 33mm M3 bolt into a heat set insert.
Galactic Unicorn Screen Mount! Requires 1x heat insert and a 25mm M3 Screw. Use 4 tiny M2 self tapping screws (4 to 6mm long) on the back to secure the screen to the plastic inside case. Hope you like my design! you will need a 350mm bed…
Summary FlexLinks were developed for quick turn-around proof-of-concept prototyping of compliant mechanisms by the BYU Compliant Mechanism Research Group. Combined with commercially available toys, custom compliant components can be used…
Podtácek pod sklenici piva
Aeron Hip Pivot Bolt is the only real issue I have with Herman Miller Aeron chair. In past 14 years about 8 of them broke on me. Actually the "bolt" itself is ok but the casing for the bolt that is made out of some unknown material (looks…
As a B-737 pilot, I've struggled to find a good iPad holder/mount… so I made my own. This one just rests on the window chart holder, and clips under the chart clip to keep it in place. It was designed to hold an iPad mini, but there's no…
Replacement for main pivot bolt cap. Needed this when my main pivot bolt worked its way loose and punched open the original. Print Settings Supports: Yes Category: Replacement Parts
It's quite annoying that the ammo lock tends to pop out when shooting. This part fixes that. After installing you might need to file the nub a bit (0.5-1.5mm) to make it work smoothly while still locking correctly.
The model is a hollow cylinder with an opening going around half of the circumference. I nested a smaller cylinder inside it and attached an arm coming off of it.
Pin de bloqueo: para evitar que se abra o cierre accidentalmente Diseño delgado para que entre fácilmente en el bolsillo Dos modelos: con orificio para anilla y sin orificio para uso libre Se puede imprimir en PLA y PETG sin problemas…
FreeCAD files are provided, so remixing and customizing is as easy as possible. If you find an issue in my models or have a request to modify them, please shoot me a message. UPDATES: V3 Bushing is now easier to install, previous model…
Welcome Home into your home! Recreate Wally's home from " Welcome Home " with pivoting eyes that always seem to follow you all throughout the room.
Print in same orientation as files. Desk clamp uses supports at 45 degrees touching build plate, but are likely optional. Printed in PLA on 15% infill. Total print time approx. 8 hours on Ender 3 v2 Need 3 M4x25mm screws and nuts to…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
V zimě nezebou prsty a v létě se pivo od prstů neohřívá :-)). Nejdříve zaklapnout plechovku za horní okraj a pak zatlačit na držák v místě zadní podpěrné nožičky. Při pravidelné konzumaci piva se držák rozvolní a nasazování je snadnější.…
There is a newer version of this thing here: https://www.thingiverse.com/thing:4635067 Update:18\10\20 I had noticed some differences with the alignment of the touch panel on the BTT display with my various units. I have therefore offset…
Fostex T50RP headphones are very tough, but one place many fail is where the adjustable headband mounts to the ear cups using a pivot. The metal headband rods can twist themselves loose from the pivot and the cup will fall off. Left in an…
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
Adjust your pivot tension without marring the satin finished hardware on your premium Russian pocketknife with the use of this plastic tool. Meant to have a skateboard bearing pressed onto the bottom to assist with the spinning action.
Parametric Turnable (Pivot) Tray Tower for IKEA Skadis This is a tray tower for IKEA Skadis, which i designed because i wanted to use the space of the pegboard as good as possible. The top and bottom trays are fixed, the other trays are…
The bottom pivot on my kids bi-fold closet door decided to mysteriously break itself. I didn't feel like buying a repair kit and thought it would be more fun to just make one. This print is designed to fit pivots threaded with 5/16-18…
Harley-Davidson ( výslovnost [ˌhaːli ˈdeividsn]) je americký výrobce motocyklů , motocyklového příslušenství a poskytovatel finančních služeb. Společnost byla založena v Milwaukee ve státě Wisconsin v průběhu prvního desetiletí 20.…
HC Oceláři Třinec víčko na plechovku piva atd. ..
Vytvoril som remix pekného uzáveru fľaše hallo_ralphs. Okrem ochrany fľaše pred hmyzom atď. som pridal aj ďalšie funkcie. uzáver fľaše s očkom na kľúčenku uzáver fľaše s očkom na kľúčenku a priestorom pre logo Použil som svoj laserový…
Welcome to the Kit Card Tree Library with the 3UDC pivot mount and information on how to build a display for your kit card or anything else you opt to attach. This project uses parts from several different projects. You will print the…
Podtácek pod sklenici piva
Inspired by the new Creality CR6 SE I have remixed my Side Mounted Spool Holder with a Pivot\Hinge. To be honest I still get a lot of use and probably prefer the original design but thought this might offer some further flexibility to…
Rytíři Kladno víčko na plechovku piva atd. .. Knights of Kladno beer can lid etc. ..
Víčko na plechovku, třeba od piva. S logem piva.
I couldn't find anywhere in Spain correct pivot cups for my Bear Grizzly and Slant Longboard trucks, so I decided to print one. I am testing it for 3 weeks already and they are working very well. No signs of usage. Size: out: 19,6 mm in:…
Otvírák na pivo v motivu Warcraft Hordy. Rozměry: Délka- 91 mm Šířka- 67 mm Výška- 8 mm V nastavení tisku: 20% výplň. Žádné podpěry. Možnost změna barvy v přechodu z podstavy na logo. V jedné z fotek je ukázáno čím se lahve otevírají.…
NOTE (12/23/2023): After using this handle for a little while I started having issues with the magnets not being strong enough, I'm testing out solutions with other magnet options and will update all models accordingly once I find an…
This is an LED table lamp made up of moving parts. The mobility of the parts allows the light to be directed in any direction. This lamp can be modified in various ways. You can adjust the base (for example, here is a photo of mounting…
A tidy station for the puffco Pivot and accessories. Features Include: Pivot Holder hotknife or tool holder Q-tip storage PEARL STORAGE and of course a spot to keep your concentrates
30\10\20 Uploaded missing top & Bottom Panels for the BTT version. This is a remix of my Pivoting Display Housing but I have redesigned with a much slimmer profile. The original can be found here: Pivoting Display for Ender 3 - Pro - V2 -…
Should fit any of the 3s Arrma models. credit to resu13 took his design and made slightly larger ball part to fit my sloppy arms. Most of mine "clicked" in place. In Cura right click multiply to the number you want. Print Settings Rafts:…
Hey, the metal cotter pin on my Playseat Challenge chair broke and I was looking for a simple way to fix it. I created this simple part in Tinkercad. Just insert it into the tube, put it back on the chair and lock it with an M8x20 bolt…
Uses 2x M5x30mm, 1x M5x25mm bolts and 3x M5 nuts. Print frame with supports. Can barely fit 18cm² print beds if rotated diagonal.
