199 models
n'oubliez pas de likez, commenter et poster une photo de votre réalisation. don't forget to like, comment and post a photo of your creation.
Print approx. €5.57–€6.80 excl. taxPreliminary estimate for one variant
This sleek and stylish case is the ideal way to jazz-up your Raspberry Pi Zero! It is aesthetically pleasing, as a number of color combinations can be used, as well as displaying the Raspberry Pi logo proudly. It also doubles as cooling…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
The original parts keep breaking… so I do replace them on demand. None of the printed parts broke yet ;)
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Surface model of the T7 replisome complex as described in Gao et al., Science 10.1126/science.aav7003 (2019). All components were printed separately and glued. Proteins subunits were printed in PLA, while nucleic (DNA, RNA, and dTTP) in…
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for one variant
Plissee Griff Handle
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Based on wbphelps ' great design. You can now mount your SimpliSafe using GoPro style arms. This easily increases the range of motion for mounting. Uses normal M5 GoPro mounting hardware. I assembled with modular arms . Also, included is…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
simplistic & efficient Bed Level test consisting from 9 squares made in PrusaSlicer since i didn't like any of all available, so i made one myself :D
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I removed holes and only left 4
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
i designed this to fit my thicker phone case and very satisfied. no supports needed, printed in an hour on my ender 3v2. i used default ultimaker cura settings. very simple and easy to use right of the build plate. the small hole is for…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Just a simplistic sand castle set. NEW: I included some thinner wall versions to save a LOT of time & plastic during printing! Drafted Design for easier castle making! Created in Fusion 360 Castle Tower and Castle wall are included in the…
Just a cute and simple to print working cat bookmark! Print with 0.15 layer height and with ironing if wanted. If you want it larger or smaller just simply adjust the size.
Die Einsätze sind leider von Modell zu Modell verschieden. Also einfach vorher vergleichen. Ausgemessen und mit Fusion360 konstruiert.
A simplistic design to keep your garden nice and tidy. Design highlights: Rounded rectangular shape for high space utilization. Lots of holes for good drainage and ventilation. Raised drip tray so the excess water doesn't block the…
Simplistic Cat Doorstop. Might need to be scaled for high profile doors. The standart model works for clearances from 2 to 10 mm. If anyone has any questions please contact me, THop3D
Say hello to the latest addition to my workspace: an elegant 3D printed laptop stand that I designed and printed using my Ender 3 v2! After using the stand for a while, I can confirm it works great. Full article instruction on my website.…
50 % Infill PETG Facebook: 3D Druck für praktische und nützliche Dinge
I bought a bunch of OBI (German DIY store) plissees for my windows. They're great because you don't have to drill into your windows - but the holder clips seem to break every so often. In fact, OBI has switched to metal brackets by now.…
This is a Plissee mount. Print it with 100% infill. This is a Plissee mount with 2mm thickness, 90° angle and snap it mount.
There's only so many things that can be written about a shower head, but here it goes. :) I wanted something similar to the one we have already, which is breaking down. So made it in a simplistic (IMHO) shape. Made a few attempts, the…
Mount designed for SimpliSafe, or other brands, Door and Window Sensor that can be mounted to a garage door. When the garage door opens the sensor will flip down showing the door opened. Printed on a Bambu Labs X1C using Bambu PLA Jade…
Doorbell camera wedged designed to improve the camera field of view. Included modes for left or right side installation with pivot angles of 10, 15 and 30 degrees. This was designed for the Simplisafe doorbell camera I have with dimension…
This is a 45° mount for the simplisafe doorbell camera. It has two pass throughs for the wall mounted screws and two for the simplisafe doorbell camera back plate. There is also a pass through for your door bell wires.
Drill perfectly perpendicular to a wall or object using these simple and small drilling guides. Available for different drill sizes. Both available with and without dustcollector. Using a dustcollector, most of the drilling dust will be…
Ersatzteil für Plissee einseitiger Anschlag selbsthaltend.
Here is our version of Snake Plisskens mack 10 from classic movie Escape from New York. We are also on gumroad where we list cutup/slicedup props, heres few links of sweet prop files our Thanos sword gum.co/pXLb our Red Queen Sword from…
Behold your very simple coaster, sleek and basic, providing a nice empty slate for you to customize and/or print! Capacity This coaster set is capable of storing six total coasters, more than enough for your family and friends to each…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix from a wall mount on Thingiverse by spiceyux. I wanted to separate the parts into three pieces for shorted print times. I also changed the dimensions a little and added a lip for the bottom. After printing I used super…
This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices) so I decided to model this "Spannschuh" myself. I used Autodesk Fusion 360 for this purpose and tried to replicate the…
A simple dyson attachment holder. One piece, print unsupported. Verified to work with V8 and V10 models. Maybe others. Print Settings Printer: Creality CR-6 SE Rafts: No Supports: No Resolution: .20 Infill: 15% Filament: GST3D PLA Brown…
A simple replacement for the self-gluing installation helper. My approach works without drilling opr gluing. It might be required to adjust the size for your needs (Step/3MF/STL files are included)
I created this "tool", because i don't want to spend a lot of money for it. If you want to save money too, print it. And if you'll only want to save a little money, I'm happy about a little tip via PayPal. After printing, there is nothing…
One of my friends has a birthday coming up, so I decided to create a neat little birthday cake! This print is made to be printed with multiple colors, but can be printed with single parts and put together like I did. I used my Prusa i3…
This is a two-piece model. You can print each of them (the main body and the base) without supports. After printing, just place the main body into the base (glue or no glue … depends on you ). Also you can think of your own label or maybe…
Rollo, Jalousie, Plissee, Kettenstopper für Kettenschnur mit dem Kugeldurchmesser von 4,5mm. Aufgrund verschiedener Abstände kann dieser Kettenstopper vermutlich an alle gänigen Modelle montiert werden. Damit bleibt die gewünschte…
Holds a SimpliSafe alarm water sensor down in the sump pump pit where it can sense high water level before it overflows. Two designs: One to clamp onto a 1 ¼" PVC pipe and one to clamp onto a 1 ½" PVC pipe. Adjust the clamp so it's just…
A simplistic beard bead. It can be scaled to whatever size you need and it should print without any issues. Nothing more to say about it
Summary Remix of wtrow"s Simplisafe Simplicam camera corner wall mount https://www.thingiverse.com/thing:5192178 Original Corner wall mount stl was giving me first layer issues so I fixed it. Also made a square version, a 10 degree right…
Plissee-Rollo Einsatz Spannschuh kleinere Version der Schnurführung. PLA-Druck in wenigen Minuten fertig.
This is a birdhouse with a very simplistic design. It is broken into two parts (LEFT and RIGHT), each part should fit in a (220mm) cubed build volume. The design is meant to be open (preferred by some birds) and easily cleanable (interior…
The base plates of my Luxaflex Plissee broke down after 10 years. It keeps my plissee nicely in the windowsill. This design replaces the original base plate. I increased thickness on several place and used PETG for strength purposes. It…
I like the look of the SimpliSafe3 home security key fob, but the buttons are too easy to push accidentally, so I created a case to both protect the key fob from being scratched and prevent accidental button pushes (including the panic…
A doorstop shaped like a little mouse. Works for clearances between 2mm and 12mm.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Angled spacers from 5 degrees to 30 degrees to allow you to mount the SimpliSafe video doorbell in corners. Designed or SLA printing, but can be printed with high accuracy FDM printers.
https://www.printables.com/model/14392-escape-from-new-york-snake-plissken-mack-10
Very simple door stop. No supports needed.
quick and easy print no supports needed. print x 2 so that way you have a pair enjoy the simple bookend and its a step file
Ersatz für das meist Transparente Teil auf welches der Griff geschoben wird.
This is a wall mount for the SimpliSafe Control Panel, that I created after seeing that the manufacturer did not offer it. Created from scratch in Tinkercad after seeing another model online. This is a tight fit (on purpose) and needs…
3 perimeters for handles and 2 for blade works fine. Follow for more
This is a simple desk tray for you small items on your desk. On the underside there are five slots for your cables for example your mouse, keyboard or other wires (diameter max 4mm) Print instructions place with bottom down, just like it…
Needed a bracket to mount the camera in the corner, used some command strips and this mount.
Dieser Halter dient zum befestigen von Plissee am Fenster
This part has been created to replace the original clips which became brittle and broke after some years. Print this part standing up with a small layer height. Using PETH I had the best result by grouping a set of four and then printing…
This is a easy to print handle replacement for Luxaflex Plissees
This is an adapter for glueing plisse clamps to the windowframe. Use an M3 Nut with an M3x8 bolt and washer to screw the clamp to the adapter. I used 3M VHB Tape to stick it to the windowframe and cleaned the area with isopropyl…
I have a SimpliSafe Gen 3 system, but the base station is really bright when the system is enabled. So I made a light shield to help make it darker. Your first option: print the light shield in white. The light will still bleed through.…
I created an easy to print, cost effective and easy to handle cabin blinds for our Ducato camping car (RV) Additionally, I did not want to punch holes in the car. Our Burstner camping car came with curtains, not easy to apply for the…
Simple corner wall mount for the SimpliSafe base station. Looks good when paired with a cord cover. Printed with PLA at a 0.2mm layer height, tree supports on the build plate, and a brim.
-erstes selbst erstelltes Modell -Anfänger im 3D Druck -100% Infill, PLA -1:1 Kopie vom defekten Teil
You'll need to add some double-sided adhesive to mount it to the door. It's 1.5 inches tall. Feel free to modify for other sides.
A few months back, my Simplisafe sign was blown away during a nasty storm. Trying to save some money, I decided to model a replacement sign while making some small alterations to the wording on the sign. I designed this by finding a…
Gedruckt aus PLA Layer_hight: 0.2 Infill: 100%
Kleines Ersatzteil eines Plissee-Halterungssystem. Super zu drucken.
I haven't had a chance to actually print the model yet so I not sure about sizing, but it can easily be scaled to your liking. Once I have printed it, I will upload photos of it and edit it if it needs it.
This model is a very simple case for any USB drive with a PCB size around 15mm x 34mm in size. The bottom piece has a keychain loop so you can easily attach it to a set of keys or a lanyard.
This is a very simple and non fancy handle for textile shopping bags. I recently had to carry two heavy bags around and it wasn't fun. The textile handles rolled into a thin pipe like handle and pulled into my hands. I looked as available…
It's for easy settings which Prusa infill you want on your lander, number of walls, etc. Painted supports on but not sure they are useful !!! Make color swap for the pattern to show off around 0.8 for 0.2 layer height. Add Adaptative…
Plissee Clip für Plissees vom Raumtextillienshop. Original Ersatzteil nicht mehr erhältlich. Mit Support gedruckt in gezeigter Richtung Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes…
Simple die for gaming AFK. Numbers are featured as symmetric symbols. A bit big crude and bulky. You may want to scale it down. Beware of printer trace with. Check slicing result in preview. Category: Dice Shapeways deleted my account…
What's left to say? It's a convenient way to hold 6 joint tubes without the damn things rolling across the desk every which way. I have been playing a lot of Fallout 4 and thought I would make the top styled a little like the Mass-Fusion…
Pour remplir des éclairs de crème pâtissière épaisse j'avis besoin d'une douille de remplissage de diamètre 4mm intérieur. La paroi de 1 mm l'aiguille est un peu épaisse et devrait pouvoir être réduite de moitié.
éalisation du dessin de l'entonnoir sous Fusion 360 génération du Gcode est réalisation avec imprimante !!!!!
SimpliSafe only sells their entry sensors in white, which looks out of place on dark window and door frames. These covers slide over both pieces of the 2-part entry sensor — the active side (with the status LED and reset button) and the…
This is an extremely simple and useful universal phone holder. Just slip it on one side of your phone, and it will stay up, it is surprisingly study. Each end has a different size. Use the smaller side for a phone of 8-10mm and the larger…
I wanted a simple bird feeder box that would be gravity fed, easy to print, and allow my cat to view the birds. I didn't find any model that would not overcomplicate it. Lid has 0.15mm tolerances, my own print has 0mm but it definitely…
Update!! Fixed diameter of the 4 toothbrush holes to fit with colored rings. Description Simplistic detachable wall mount for your Oral B Pro toothbrush (Compatible with the Oval Shaped Charger). I decided to make it easily detachable for…
My pleatings adhesive plate broke (see picture of the original part) and I would have had to buy 4 new plates with double sided adhesive tape for around 20€. But why buy those expensive plates when you can print them yourself? However you…
These holders in various designs are used to fix a pleated blind in a window reveal using adhesive. The wide holders have a recess for the silicone seam and a larger adhesive surface, which should improve adhesion. I used transparent,…
Simplistic Vase/Bowl for any purpose. Happy Printing!
a replacement back for the simplisafe gen2 entry sensor main body (not magnet). close enough to spec that it operates fine. printed with PETG with PLA supports, .4mm nozzles, .25mm layer height and a high infill.
Left and right Remis Sunshade window blind part FIAT Ducato/motorhome
With playgrounds.com created and customized with Krita. You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out. I started adding stl to my models.…
The simplest spool holder you'll ever see. Fully 3D printed, fits any spool width under 75mm. Flanges on the edges of the rollers to prevent spools from riding up over the side. You'll need two rollers and a base. Insert bearings into…
Simplistic Chess. Print in place apart from knight and (I think) king. Probably needs to be resized. Enjoy!
image was printed in PA6-CF but just about anything will probably work.
This a soap holder that uses slopes to provide drainage while making sure the soap cannot slide. I designed it to be simple and also look very astheticly pleasing. I pritned this in white PLA and works fantastic. What I used: supports:…
I wanted to individualise the handles of my pleats at home, so i designed some and printed them. I attached a step-File, so you can adjust the fitting. The Model has a length of 38,3 mm.
Two versions optimized for horizontal and vertical print. I suggest 0.10mm 100% infill with organic support structure on the bed surface.
My inexpensive pleated blind came with unattractive, uncovered openings. To hide the protruding cord, I designed a cover. The clip fits tightly enough to also cover the upper mounts. Printing Settings Print with the flat side on the build…
Use this to test your 3d printers quality or to remix the model for use in other models/projects.
This is an entry for the 2023 Business Card Holder Competition. This model was printed using wood PLA and was printed using .15 mm layer height. Any layer height can be used to print as long as the feet can remain unsupported at a 45…
Might need to shave off a bit of the stem to get it into the stand. Printed at 20% infill, about 10g. Changes: - added updated version with nicer stand
This is a small bowl made for keeping little things inside safe. Dimensions 86mmØ Heigth: 50mm (65 lid incl.) Printing Any layer height (I used 0.2 mm) No brim Supports are recommended for the lid Experiment with ironing to make it nice…
AnkerMake M5C mount for a SimpliSafe Indoor Camera to look down onto the print bed. Additional Things: • M4 Bolt 20mm x2 • M4 Nut x2 • Use the original camera mount from the link below. I used this person's print and edited to mount onto…
Der Abstand der Haltestifte beträgt 20 mm, die Gesamtlänge beträgt 36 mm, die Gesamte Höhe beträgt 5 mm. Die Maße können noch individuell angepasst werden.
![Raspberry Pi Zero simplistic case with logo [Remix]](https://media.printables.com/media/prints/68573/images/749792_048f99ce-f662-4cd8-a0ab-62bc6275b226/p6055948.jpg)
