652 models
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
When you are using the original spoolholder of the BambuLab X1 and you have also the AMS installed, you are still not able to use wider spools. The SpringBuffer is in the way. With this simple 20mm spacer a wider spool is usable. It is…
First mount the base on the printer, after that you can slide the holder to the base. WORK IN PROGRESS, still need to make the testprint but should fit according to the drawings.
A no clunk adaption of the wonderful "Gravity spoolholder for MMU2S" by Michal Fanta. Video: https://youtu.be/Li5INzZ04JA Many of the gravity rewinding spool holder allow the spool to continue spin at the top, by jumping over the gears…
Description: I designed these leg extensions for the Prusa MINI base to raise it by 30mm or 60mm and a flat spool holder with ball bearings so that the spools run more smoothly. It is also possible to use other spools than Prusament…
A remix of @BenEngelen_1385989's mount that doesn't need screws or inserts. I wanted to minimize the footprint of the printer as much as possible so I also shortened it so it just holds an average 1K spool. Will print without support if…
Make printer more compact. I tested the model for 2 weeks. 30 hours of printing. There were no problems. Filament PET-G (~140g) Layer - 0.2mm Wall - 2mm Top and bottom - 2mm Infill - 25% Printing with supports The parts in the files are…
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
This is a display for 6 Coaster in a Spoolholder shape. The spool is made of 3 pieces. You can print them flat on the printbed and just slide them together. They fit very well and the friction ist big enough so the parts wont move. Now…
UPDATED: Longer versions and right handed thread versions. And for the longer version I also added an end cap to get an cleaner look. Enjoy! Designed and made an spoolholder for the AnkerMake M5 that only requires that you to take off the…
This is an o-ring for the spoolholder of the Core One+ It goes on the removeable side of the spoolholder so that the bayonet mechanism stays in place once rotated onto the puck. Get the new spoolholder from the Core One+ uprade parts:…
Description About spoolholders With the introduction of our telescopic injection-moulded spool holders, we also wanted to give you an option that you can print yourself. If you like the telescopic spool holder but don't want to purchase…
Prusa CORE One+ and CORE One L 2kg Spool Holder This spool holder is a remix of the official Prusa CORE One to CORE One+ upgrade, adapted to support heavier 2kg filament spools. It uses the standard spool holder puck system, ensuring…
It is a adjustable spoolholder. You needed four bearings 608. Print instructions Print the screws with 100% infill.
This is a combination of the Top spool holder and the Riser for the K1 Max. It is a very basic design that I made in Creality Print itself lol. I reduced the height of the riser made by Fred Boisselier for my K1 Max since I felt it didnt…
19.08.2026 UPDATE This set was created alongside the release of the CoreONE+ update. It’s a universal spool‑holder set designed for standard spools and compatible with the Prusa Drybox (except the 2 kg and UNI versions). After purchasing…
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…
Replacement holder if the creality spoolholder needs to be used elsewhere Layer 0.2mm Perimeter 4 Fill 15% Gyroid Supports yes The model is designed in the absence of a digital spool rack…
Introduction: This is a redesign of the spoolholder for the Creality K1C that creality provides. This design innately uses more walls and less infill. This provides better strength and uses the same amount of material as the original one.…
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
I made a simple Spoolholder for the Bambulab P1P/X1C. I have not enough space between my Printer and the wall. So i needed a Spoolholder wich doesn't take to much space. I also use the original BambuLab Spoolholder. You need 2x M3x30mm…
>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
Large spoolholder for the bambu lab a1 mini. Support for 78mm filament spool.
This is designed to snap-on a 2040 extrutions, like used in the Bear Upgrade for the Prusa Printers
Don't mess around with an external Drybox to print with your moisture sensitve filaments like TPU, PETG and Nylon. Print one yourself, that fits inside the Original Prusa Enclosure! The Drybox is very easy to make, you will reuse your…
Do you have a filament spool with a beveled or rounded edge that keeps slipping off the spool holder during printing? This compensation middle ring is the simple solution. Creates a flat and consistent surface Easy to install - simply…
Here's my Spoolholder for Autorewind (THX for that greate THING ! https://www.thingiverse.com/thing:3252111 ) which fit into IKEA Samla Boxes. To store the Filament in dry and dust save condition. Included: 3-Spool-Version for a…
UPDATES Step file of the assembly has been added 2023-08-05: NOTE , if you use cardboard spools, try and keep the spool off of the very edge of the holder (with the two very thin parts on each key); Cardboard spools tend to be hollow in…
UPDATE 24.11.2023 Thanks to the feedback from “chochi3D” i was able to optimize the overall stability of this spoolholder. The following changes helped improving the stability: using 2 bearings for the one-sided mounting option (can also…
Spoolholder for the Creality K1. It uses the standard given support, moving the spool placement from behind to the side. I used M3 screws for the mounting. I have done two variants, one for just the spool and one whit a support for the…
Hey makers, I still had exactly 5 PC4-M10 PTFE adapters and i wanted a long clip to integrate them into Michal Fanta's wonderful spool holder system. So I built in an M10 thread and minimized the holes from 4 to 3 mm so that the PTFE does…
3DP got tired of adjusting the Prusa Mini's stock spoolholder. And when the big spool didn't fit, he lost his last bit of patience. He decided to create a new one that would fit all spools. He created a new spoolholder that would fit any…
This design was inspired by some grainy pictures of the Prusa Mini External Beta spool holder posted on twitter, and the desktop spool holder that Atomic Filament sells. The SCAD source code has parameters for things like the "target"…
Just 2 versions of clips on which we can screw PC4 (Push to Connect) M6 PTFE fitting. I don't have CAD software to edit STEP files then i updated the original STLs using Blender. The threads were generated with OpenScad before integration…
A simple spoolholder with a hex-pattern. Fits perfect for Prusament spools. Print instructions Best results with 0.15mm but also works with 0.20mm. Print with PLA or PETG Print with support on build-plate only for body 15% infill For a…
Flexible 25x3.5mm O-ring required in the Prusa CORE One to CORE One+ upgrade guide for the upgraded spool holder. It has a 1mm flat bottom for easy printing. For the best flexibility: Use softer (95A will work, but softer is better)…
I was so satisfied with the first build so i made one more but with a few changes. i think the Spoolholder and filamentfeeder also gonna fit the MK3 BEAR bec it is the MK3s OEM hight of the Z-Axis extrusions. I use 25mm stainless tube and…
Needed a bigger nut to fit spools with bigger holes. (e.g. Sunlu spools). Should fit on spools with a hole with 76mm diameter. Also works with Prusament spools. Print instructions No supports needed. G-Codes for one or two pieses available.
Here is an rail spoolholder for larger rolls! Hier ein angepasster Spulenhalter für größere Rollen! Print instructions 3-4 perimeters + 20% infill for strength.
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This adapter is usefull if you want to use the Gravity Spoolholder for single filament Prints without the noisy clonk sound 😏 Print instructions…
Original spool holder modelled from scratch. Need more tolerance testing. Can be used as start for modding
A small adapter which enables you to mount the spool holder to the Neptune 4 Max horizontally. 2pcs M3x30mm 2pcs M3 hex nuts 2pcs M3x35mm Be careful, your x-axis will collide with the spool if you use the full printer height!
I didn't had enough space to attach the original AnkerMake M5 Spoolholder to my new printer so I made a little stand for it. Print instructions: Just print it with PLA and standard settings. You can slow down the first layer to 50mm/s in…
Base with honeycomb bottom and fixed filament guide for Gravity Spoolholder by Michal Fanta . It has a thread for a PC4-M10 connector. Many thanks for the great design.
UPDATE 06/27/24: I added a new design that does not require bearings and utilizes the center of the spool instead of rolling on the edges. For this version you will need 2 lengths of 4mm OD PTFE tube (you should already have this) to…
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Found the original prusa spool holder files on my harddrive after a long time of searching the files on printables… so maybe other users are also looking for it
Spool holder for the Creality K1C. Turned out that the holes in the K1C are wider apart than in K1. So extended the arm to fit the K1C. Perfectly complements…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Hi, i just draw a bigger version of the original Gravity-Spoolholder-Nut so you can use filament spools like Sunlu with bigger holes up to 73mm.…
This spoolholder reduces the footprint of the Ender 3 V3 Plus relocating the spool and the filament runout sensor. It also removes the fault of the bowden tube hitting the top gantry and potentially breaking the filament inside. The…
Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. Never unplug the AMS again when printing from an external spool.…
When managing multiple toolheads, it’s easy to lose track of which spool feeds into which extruder. These caps solve that problem by clearly marking each spool holder with its corresponding toolhead number. Features Perfect Fit: Designed…
This mod is a remix of 3 different objetcts to be mounted ontop a Voron 2.4 or Voron Trident or any 2020 Extrusion based printer. the Voron Switchwire spoolholder the ERCF Carrot Patch Fbeaukmi's 608ZZ Spool holder. Assembly should be…
I printed this out with 0.3mm layer height, black and orange PLA filament. I am providing the 3mf files. The 3mf files for the left and right frames have the layer height set for color change. If you print the gear in a flexible filament…
Like, Share, Subscribe and check out my other 3D models! Update 2024-04-19 added a version for ⌀ 25 PVC tubes Update 2024-04-27 added (2x)Federspanner Filament_D60_for_D25 for smaller Spool with lower tension >Version for 2 Spools<…
I don't have an MMU2s, but I hate tangled up filament spools as much as the next guy, so when I discovered Michal Fanta's design, I was hooked. The only problem is, without the MMU to act as a buffer, the original spool holder would jerk…
13.7.2026 Updated v2 use version 2 if the ring seems tight reduced size from 3.4 mm to 3.3mm added simple instructions on how to change the size in prusaslicer Changing the ,, Z dimension in Prusaslicer download version 1 unlock the…
This adjustable Spoolholder allows you to use every common spool on the market. You can adjust the width of the spool, by sliding the brackets on the Rail. The bearings assure a smooth filament inwind from the role. What you need for 1…
simple spoolholders for 2020 extrusions. The long version is made for 2.3kg rolls screw hole dimension is M3 Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Creality Printer: Ender 4 Rafts: No Supports: No…
A simple filament holder that does not need to be glued or screwed. Only 4 pieces of skateboard ball bearings (8x22x7) are needed. Smal to big filament spools (5kg)
>Version for 1 Spool< >Version for 2 Spools< Update 2024-03-31 -Added Hygrometer (Xiaomi Miija Bluetooth Thermometer) -Added spool clamps -Added my remix of PTFE endcap Update 2024-04-01 -Added a splitted in 2 parts version for smaller…
Simple Upgrade to the Spoolholder Prusa suggested for the Ikea Lack enclosure. Just got annyed because of the vibration the original makes. SO i designed some TPU Wheels to fit on standard 608 Skateboard/Rollerblade Bearings. Print the…
Print area of at least 290x290 mm needed! Print settings: Optional layer height but 0.2 works fine. 4-5 perimeters, 10-20% infill, at least 0.6mm top and bottom. Print one pipe, two sides and two fronts. Assemble and print some more. You…
When I printed and fitted the new Core One+ spoolholder, the door would no longer close. I decided to remix the frame pieces and make them deeper to move the window further away and allow the new spoolholder to be fitted and the door to…
Prevent tangle Ajustable for all spool =< 1kg (Prusament, Arianeplast, Grossiste3D, ICE, Amazon, …) 2 versions: bottom only or entire spool I recommend you the "entire spool" version Default 0.2mm Speed - PETG
This spoolholder, replaces the standard with a smoother moving and fits right to the standard screws and placing. Print laid down.
Filament guide that fits to Prusa and @panak97_765577 "Original Prusa MK4 Prusament 2 kg spool holder" Version 2 have fittings for 10mm diameter PTFE inserts. Spool holder from @panak97_765577 can be found here And the original Prusa…
Update Feb 2026: THESE SPRINGS DO SIT in their houses - under tension - NOW FOR THREE FULL YEARS. ==> no loss of function or reliability. Just wanted to let everybody know !!! --- end of update --- In my published Model I explained that…
A ball-bearing filament spool holder with enough space for the printer 2x ball bearings (8x22x7) 608; 2x cylinder screws (M3x12mm)
This version of clip allows you to screw in a PC4 (Push to Connect) M10 PTFE fitting.
David Glaze reworked Michal Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
Ich habe die Position der Filamentrolle grundlegend angepasst. Als erstes habe ich den originalen Halter wie auf dem Foto zu erkennen innerhalb vom Gehäuse montiert. So ist die Rolle von Staub und Feuchtigkeit geschützt. Dazu habe ich auf…
The great, modular Filler system by HugoG deserves a lot of credit. This V3 design considered the following to improve on HugoG's design: Easier to print Minimal material use Minimal use of space Strong Easy to install Backwards…
After printing Drekenthai HieloRey's Expanding Mandrel, I realized I had a lot of filament spools that have an inner diameter of around 73mm. Those spools tended to “walk” on the Expanding Mandrel and rather than risk having them fall off…
Since I like the design of the original spoolholder 2.0 from Ratrig for its simplicity , I've redrawn it in the same style. The smaller one will fit a spools max 80mm wide (almost all 1kg spools), and the larger one will fit maximum 110mm…
Admit it. You don't mount your spools correctly. They're misaligned and they wobble as they spin and vary the tension as your print progresses. This stepped nut gives you effortless perfect angular alignment with the shaft at the expense…
This is a quick remix which rotates the locator pins 90 degrees
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Hi, just a PC4-M10 Gravity Spoolholder Clip. Print instructions My recommendation: Print in PETG 0.15mm layer height, 15% infill gyroid, no…
This Sidemount uses the original sovol Spoolholder to relocate the spool to the front right side of the printer. There is also a version for M3 heatinserts. It fits on the Zero's 152x152 buildplate if rotated 45°. To mount, remove the…
WARNING. I used 22x8 bearings, but I had to sand down the rod a bit so I could get the bearing fit on it. after that it worked really good. I also recommend having filament on the side rather than on the top, as the filament wont get bent…
It's designed to fit with the https://www.printables.com/model/252904-transport-handle-for-original-prusa-enclosure. It can fit 6 spools of 1 kg and it can accommodate 2 kg spools. For mounting use: 4 m3 nuts 2 18mm m3 bolts 6 12mm m3…
I need the spool mounted alongside the backplane of the printer, so I have remixed the nice design fom BC. In fact only the spool-roller was untouched, the mount itself has been redesigned. It should be possible to further reduce…
Wow, Prusa mini upgrade- Handle AND spool holder- WHAT A DEAL low key you're gonna need a 350x350 voron or something to print this. u can choppy choppy i included step file
Bambu Lab Spoolholder Extension for AMS to use wide spools without removing the tube or cable of the AMS. Its compatible with the new spoolholder revision. Print instructions: 4 perimeters/walls 5 top/bottom layers 40% infil no supports…
Modified the original I3 spoolholder to fit in a 20x20 extrusion. This holder design is recommended if you have a direct drive extruder. Can be printed from PLA. Recommended print settings: 6 walls 50% or more Gyroid infill 0.3mm layer…
I designed a drybox/spoolholder of more minimalist shape and lower amount of material than popular ones. Holds a single roll of filament up to 75mm width. Parts required beside printed elements: 2x 88[mm] lenght 8mm rod (I used cut to…
Use 608 skateboard bearings to hold the cylinder. Press-fit in place.
Remix / Updated model according FormFutura's latest filament roll design. Added 2 small holes to string filament through during storage. If not compatible with your filament rolls, maybe check version “2021”… Prints without supports.
Remix from the Gravity Spoolholder, for 2kg Prusa Spools
Update (26. April, 2024): I have pushed the design to Version 2. This now requires a 6900-2RS Bearing (10mm*22mm*6mm) behind the metal coil adapter. Diameter of the metal spring housing needed to be smaller than in the first version. With…
Overhead mounted Spoolholder that you can drill into wood (e.g. if you have your printer in a shelf). The object is perfect for small spools. If you want to use "normal"-sized spools, then make the size 130-150% of the original.
Replace the plastic wheels in the new spool holder design that come with the MMU3 (Newest design as of April 2024) with ball bearings using these simple two parts. Print in PETG 100% infill for strength. Also add a PC4M10 Jack to the…
This mount replicates the top v-slot rail for holding the Ender S1 spool holder. This model, one printed normal and one mirrored, gives the final spool holder mount.
Made this spoolholder so my mother can organize her sewing threads in her drawer. The Base is 14cmx15cm and the height of the sticks are about 6.5cm.
Moin hier mal ein kleiner Remix für einen Spool Holder mit Z Stabilisator. Da mir die Vorhanden Spool holder nicht gefallen bzw nicht 100 prozent gepasst haben hab ich mal einen eigenen Remix erstellt. verwendete Vorlagen…
This is a remix of the original spool holder. I like the idea of no screws. These use the 608 bearing. Make sure your printer is setup properly with tolerances for screws. There is no need for supports anywhere for the average Prusa model…
Spulenhalter für den Tronxy Crux 1. Ich habe das passende Gehäuse für den Filamentsensor gemacht. Siehe hier: https://www.printables.com/de/model/420847-filament-runout-sensor-tronxy-crux-1 "Spool holder for the Tronxy Crux 1. I have made…
![Adjustable Desktop Spoolholder [SCAD]](https://media.printables.com/media/prints/10002/images/81934_39a6b7aa-9e61-4e38-aa3c-5bbe9fca8412/img_0412.jpeg)
![New Filament Spoolholder with enough space - ball bearing [Bambu Lab X1/ X1C]](https://media.printables.com/media/prints/526657/images/4256134_e923fd72-943a-4b31-8799-ed570767cc24/img_20230713_200455.jpg)
