1,291 models
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Print approx. €87.94–€107.49 excl. taxPreliminary estimate for one variant
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Print Settings Material: Gembird - Marble Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Print approx. €11.42–€13.96 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned Permiter: 2 or more for better watertight For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40…
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
Do you need a spare pyramid for board game Ramses II? You come to the right place. It fits nicely and even can be stuck on top of original pyramids.
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - PLA Rusty Copper / Spectrum - PLA Peral Gold Nozzle: 0.4mm Layerheight: 0.15mm Brim: On Support: Build Plate Only (Necessary otherwise the head of the mushroom will be ugly) For Mini Settings Printer…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Print Settings Material: Gembird - Galaxy Blue Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: None Top fill pattern: Concentric Post Process Not necessary
Print approx. €5.84–€7.13 excl. taxPreliminary estimate for one variant
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant
Pyrite-like pen holder or vase or whatever you want. Easy to size. Print instructions I printed it from Pla, without support, but there is a small point on it where it is a bit overhang, not dangerous, it can be easily repaired with a…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
Here is a version of the smaller pyrites: https://www.prusaprinters.org/prints/63689-pyrite-circle-penholder-small-pyrite Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position:…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
Be especially careful when printing. The pyrite snail is an extremely aggressive creature. Don’t be fooled by the lovely cute face and cute snail shell, these creatures are extremely territorial in nature and twice as fast as the average…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
A square-based pyramid where all of the edges are the same length.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Pyramid with Scroll Art
Print approx. €14.51–€17.74 excl. taxPreliminary estimate for one variant
This model is a strong , simple and stackable painters pyramid. It is used when painting for example a piece of wood. With this little tool you can paint all sides of the wood piece in one step without waiting for the paint to dry,…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for PETGSource material: PET
This misleading temptation to construct the pyramid with the small pyramid at the top will not work. Finding an alternative path to a solution is not hard, but maybe a little surprising. This is a good 3D visualization puzzle for…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant
A pentagonal bipyramid.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
40x40 mm prý by to mělo brousit žiletky :) 40x40 mm supposedly it should sharpen razors :)
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
If you align one of the triangular sides of a square pyramid with one of those of a regular tetrahedron in such a way that the vertices align, how many sides will the shape you produce have? The answer is likely to surprise you. The key…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Просто загрузите файл на карту принтера и печатайте
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have a Pyramid for you as a stand for painting, coating, spraying paint . Great thing when you have to paint or spray boards, larger pieces. Then it doesn't lie on the ground. It's better to spray, paint with a brush. There is a…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
Dicetower_Pyramid
Print approx. €6.73–€8.23 excl. taxPreliminary estimate for one variant
A square pyramid with only the base, the height, and the edges visible. The model is designed to be tactile and is suitable for use in the classroom to visually and physically illustrate geometric shapes and relationships. Created by Linz…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Elongated pentagonal bipyramid.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Žáci společně vytvořili pomůcku do výuky Dějepisu – Starověký Egypt - Pyramidy. Od sběru a zpracování dat, po modelování a vytištění na 3D tiskárně.
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
I encountered the problem that in the months with temperatures < 0°C my rear brake bowden cable freezed because there was water in the bowden cable. unfortunately this brake is designed in a way that in horizontal mounting position (as…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
EN : Pyramid-shaped lamp for battery-powered tea lights. I recommend using transparent PVB as the material; spray it with propanol and let it dry. Do not use candles with an open flame. Here in 2 versions : a thicker one (V1), for which I…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
no need for support, but pretty hard print (depending on your printer skills). very satisfying clicking the balls in.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Žáci vytvoří praktickou učební pomůcku – pyramidu (může mít různý počet polí), kterou budou využívat pro procvičování matematických operací ve vyučování.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Žáci 5. ročníku vymodelují „sčítací domeček a pyramidu“ pro své mladší spolužáky. Razítka budou fungovat pro předtištění při počítání, zrychlení a zefektivnění výuky matematiky na 1. stupni.
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
Here's my take on the painter's pyramid. I've designed it in three sizes, measured by the long edge of the triangle. The design is meant to be 3D printer friendly such that you should not need supports to print this. Update: I printed 6…
This is a remix of ricktu's Fractal Pyramid on Thingiverse that is more reliable for slicing in Cura 5.1.0. When sliced in vase mode, the original model had thousands of retractions on the first layer. So I edited the original models in…
🇲🇽 Welcome to Yucatán, Mexico! Ancient Ruins , a dedicated sub-collection by MiniWorld3D about past civilizations, presents: Mesoamerica. This model was created by Artemio García . This is available in two versions: Actual state (ruins)…
🇪🇬 أهلا و سهلا Welcome to Egypt! The only remainder of the Ancient 7 Wonders of the World ! This model depicts the Great Pyramid of Khufu/Cheops , the Pyramid of Khafre , and the Pyramid of Menkaure , as well as the smaller building…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
First of all, I am not the initial creator and only did some adjustments specially for Prusa Printers all credits for this awesome work please to this Guy: https://www.thingiverse.com/thing:3356047 Hello all, I still feel that MMU2s…
What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…
As the title states, these are scan markers for 3D scanning primarily used in Structured-light scanning. The embedded magnets are interference fit while the markers are applied as stickers on all 5 sides. BOM 10×3mm Rare Earth Magnets…
Sculpting practice of Spyro the Dragon by ninonic99 , based on the Reignited Trilogy. Originally uploaded to Blend Swap .
The Design Back by Popular demand with a Mini Pyramid Passthrough. Compatible with the rest of the V2 Series Now in the shape of a 3 sided pyramid (a tetrahedron), The “male” part of the thread seems to defy physics by passing through the…
🇪🇬 أهلا و سهلا Welcome to Egypt! Print The Pyramids of Giza in their true setting with intricate detail! This model was developed in collaboration with Micropolitan , combining the MiniWorld3D detailed model of the landmark with…
Download Bust of Superman kills The Joker Injustice League STL for 3d printing by CG Pyro fanarts This bust is part of the Superman Kills the Joker package which is a diorama in 1/6 scale and scalable without problems to 1/4, you can find…
A changeable 6-spoke pyramid pass-through twisty puzzle fidget toy, made famous on TikTok, including the OpenSCAD 3D model file used to create it. I was driven to create this model because everything that I'd found on the 'Net did not…
Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures Sarah Fortune, captain of Aguasturbias famous for her looks but feared for her brutality, is a stern figure among the port city's hardened…
I needed some marker setup my Revopoint POP 3D Scanner is able to pick up better than flat one on the turntable. Come up with these minimalistic pyramid I put the scanning markers provided by Revopoint (10mm Diameter). Fast printed , very…
pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid…
Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Spiral vase: On Supports: None Post Process Not necessary
Pyramid Head 3D Model – Silent Hill 2 Highly detailed 3D model of the iconic Pyramid Head from Silent Hill 2. Designed to capture the eerie and menacing presence of the character, this model is perfect for fans, collectors, and…
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…
The pyramid in the pictures has 6 lobes on the screw. Therefore it fits in 3 ways, where 1 way is the “right” one. Onshape Design Link
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
Spyro the Dragon rendered 3D model from the "Spyro reignited trilogy" in a sitting pose / waiting pose + Keychain buddy version. I was asked: "Hey can you make a smooth and compact pose for the use as a key-chain buddy". The blender…
12/02/2024: Modified version added: wall width slightly increased and pyramids can be connected. Last photo -- side by side comparison with original (used the same printer, the same filament and the same settings). Round holes of original…
Attention, this is just a joke, not for real use! Is a sudden revolution breaking out in your country? Or do hordes of zombies surround your house? Don't have any weapons, just a 3d printer? Don’t worry, you’ll be done in a two hours and…
Egyptian style pyramid Print instructions Print outer shell slow to avoid ghosting of the hieroglyphs Category: Buildings & Structures Summary Egyptian style pyramid
English It's just a small painter's pyramid. The existing templates were either too big for me or too unstable. I've tried to find a good balance. The pyramid is only 25mm high and (in contrast to the templates found) not so sharp at the…
This is my new version of the Hatak Class Pyramid Ship from Stargate. The model is waay bigger and waaay more detailed, then my original one. It also comes with a pyramid so it can land on it. It is a kit and you do not need any glue for…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
This is my model of the Cheops Class Pyramid Ship that was featured in the movie Stargate as well as in 3 episodes of the SG-1 series. The model has sliding parts to simulate the features seen in the movie and it comes with its own…
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer bottom surface: Print on a textured plate. For a nicer top surface: Change the Lift Z to 0.1 Top…
A larger pyramid style challenge coin holder designed to display 10 coins of 40mm diameter displayed in 45mm diameter cases. Want a smaller version? Check out my smaller 6 coin pyramid holder here ! Prints great in PLA at 0.2mm with…
Welcome to Central Mexico! The Ancient Ruins Collection - Mesoamerica is a dedicated subcollection to the legacy of past civilizations in parts of what is present-day Mexico and Central America. This model was designed by Dany Sánchez .…
When painting and finishing woodworking projects, I'll often use scrap chunks of wood to support a painted face and clean it up afterwards. I finally got around to designing a small (3.5cm tall) pyramid or cone-like thing to do that job…
Model of a realistic pyramid. Most of the pyramids out there just have smooth surfaces, but that is not the way the pyramids really look. The model is designed for teaching to learners with Vision Impairment, therefore a big print is…
One made from wood, now made from plastic...
Elegant solution for storing Pyrex glass food container lids. Simply print as many of each size that you need and glue or melt them together in a stack. An alignment ridge is provided in the model to making stacking them perfectly easy…
Modèle de la pyramide de Sierpinski, modélisé par moi-même. Model of the Sierpinski pyramid, modeled by myself. Instagram: @roiku3d
I recommend scaling up to 1" on the sides (166%).
A miniature interpretation of the Pyramids of Giza, reduced to their essential geometric form while preserving their iconic presence and timeless monumentality. Part of the Tiny Landmarks collection, this piece translates one of the…
Christmas pyramid. Printed in 9 parts. The parts need to be glued together or connected with a 3d-pen. The model should work, if it is not to small printed. If the pyramid is to small the heat of the candles could melt the parts or ignite…
Tried to make us a quality pyramid-triangle-paint-stand-thingi. FEATURES- All 3 models stack well regardless of orientation. -4 ECO stands held 95lbs of buckets without fail. -A single SUPER stand held my wight of 160lbs balancing on a…
My wife wants another Spyro in color :)
Print Settings: 0,1 mm Layer-height NO support needed 15 % infill
Pyramid-designed LED lamp with the proportions of the Great Pyramid of Giza. No supports required. The base features a 60 mm diameter x 8 mm high slot to place the LED light. Download an older version...
Custom replacement gear for the Spyra GO electric water gun. Ideal for repairing broken or stripped gears inside the mechanism Update, the replacement gear does not work for long. The shaft tear down the hole...
Simple stackable painter's pyramids to print without supports. Most other I saw have circular holes on the sides, which are hard to print with no supports. This design has triangular holes for that reason.
Show off that "No Hitter" ball or a great autograph you acquired with this holder that is based on a three sided pyramid. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball stands:…
Made in student version of Autodesk so quoting: “May not be used for commercial, professional, or any other for-profit purposes.” Only educational or research purposes so you can give me some feedback on what i did wrong etc. It takes a…
This is my detailed model of the Cheops Class Pyramid ship as seen in the movie Stargate and few episodes of the series. Though the ship is in its landed variant and cannot change, it has one big feature. The top can be open and show a…
If you want to support my work, you can buy me a coffee . Also check out my other models .
I Printed these at 200% as the original design was a bit on the small side, they work really well and stack for easy storage. No special instructions for how to print your normal settings should work.
Pyro model ripped from the TF2 game files.
