Counting matching models…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
Simple square fidget toy.
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
What is this [ Update3: A couple of more variants were added after recent user requests. 1) Now there are models with a 1x3 and a 2x3 footprint including larger lids. They should work the same way as the other variants and should be fully…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Great center finder with a relatively tall fence and all corners have a relief. Works both on square and round stock. Print instructions Category: Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
Two sliding labyrinths which have to be solved at once to free the screw. The main goal is to place the screw in the opposite side of the circular holes, since those are the escape from the maze. Print instructions I included the Front…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Print approx. €6.47–€7.91 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
This fidget toy is fully Print in place and does not need any assembly. Perfect to test your printer or just as a fidget on your desk. If you turn the second square really fast you can even see a gyroscopic effect. The “Low tolerance”…
What makes it special The square shape is what sold me on this one: flat sides, clean lines, and a twist that keeps moving in your hands. It is a cool fidget toy, fun to use, and a unique design to print in place. I recommend printing it…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Print approx. €13.77–€16.83 excl. taxPreliminary estimate for one variant
This model combines a square and a clamp. It would be use to assemble cabinetry, shelves, large boxes, etc. The marks are in centimeters on one side and in inches on the other side. The inside is 140mm x 140mm, the outside is 175mm x 175…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Ornament to remind us of our fraternity, and obligations
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This trash can was made by using sine waves of varying frequencies to define the outside surface, giving it its rippled appearance. Slightly different sine waves were used on each side so that no two sides look the same. The ripples also…
Print approx. €8.06–€9.85 excl. taxPreliminary estimate for one variant
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of square-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe hex-shaped…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Yes, I know another one of these! Quick 4min calibration square.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Fits 6 lids
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
If you have a problem printing, try reducing the speed to 50%. Use random seam position and Arachne mode! This Mini Square Fidget Toy is a compact and fun fidget gadget designed for stress relief and entertainment! 🟪 🔹 Features: ✅…
It works with most of this type (like on pics) carpenter's squares Screws from top are M4 size, to reduce looses if your carpenter's square is lower high. It don't have to be headless screw. Can be ordinary M4 or imperial size replacement…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Made for a 1990 Chevy Blazer, Chevrolet and GMC trucks from 1973-1987 as well as Blazers and Suburbans through 1991. Giving credit to AzJake for this Design ⬇…
Print approx. €5.16–€6.31 excl. taxPreliminary estimate for PETGSource material: PET
A versatile square tray with a 142.3 x 142.3 mm dimension and a 12 mm high rim, ideal for dice, jewelry, and more. Un plateau carré polyvalent de 142,3 x 142,3 mm avec un rebord de 12 mm de hauteur, idéal pour dés, bijoux et plus.
Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant
This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…
I made an enclosure for a 3D printer using 500mm long 2020 aluminum extruded profiles and 500mm square acrylic panels for a partition. Below is a comparison with the enclosure using IKEA's LACK.…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
End cap for hollow square tubing (25.5mm X 25.5mm)
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
This is a small center-finder that can be used to find the center of round or square stock. It is a fine woodworking tool. The edges are beveled and smooth and there is a cutout in the middle so an uneven corner on square stock will not…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Need a way to pay at the Our Generation Cafe? Use this terminal from Square! This Square credit card terminal is for American Girl / Our Generation dolls because it's at 1:3 scale but you can modify the scale. This terminal has a hole to…
A basic utility/gas/meter cupboard key with a square socket. Also used on some public bins. Has a decent thickness for the grip with a thinner section on one corner for easily putting on a keyring. Print with a decent number of perimeters…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Half and full size pans for watercolours. They have the same size as Schminke pans.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
This protective cover for set squares offers reliable protection against scratches and breakage. It ensures that your set square remains in excellent condition. Ideal for school or office, the cover shields your set square from everyday…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
Checklist Stencil Circle & Square
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
EN Winding key for children's toy. Internal shape of the hole - square, 3mm. Print setting: 0.15mm Material: PLA Filling: 15% Collar: recommended Supports: print hot bed only (recommended but not required)…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
This cap is to cover the end of a square pipe
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.
Print approx. €16.21–€19.82 excl. taxPreliminary estimate for one variant
This “Geodreieck” is a common tool used in school K-12 and they are getting so expensive so that I just started 3D printing them. The result is a dual-color triangle with important markings being highlighted. HOW TO PRINT Download the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
A Sator Square using the font carved into a wall in the medieval fortress town of Oppède-le-Vieux, France.
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
Motivation This model is a replacement/repair of a garden metal table, that the foot legs rubber cover got broken due to the age and use. It is for a standard 20x20mm legs square metal profile, therefore the foot leg cover is has a hole…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Generate your own vial rack with OpenSCAD. The model is not limited to HPLC vials, just change the vialP (Vial OD) parameter. The maximum number of positions depends only on the size of an available printing area. The thickness of the…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for PETGSource material: PET
I put 100% infill for the best stength. 1973 to 1991 chevy GMC square body trucks, suburbans, jimmys, and blazers
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Measuring sticks in inches and centimetres for wargames (Warhammer, Warmaster etc). Two 3MF files are provided — download these! These have colour changes already set up, and print a whole set of rulers. If you don't want the whole set,…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Centering square gauge to find the center of a circle for drilling etc. > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid. > Outer Perimeter: Set to 4 for strength
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Have fun Printing
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
These gcodes are made to print a single layer and to start from the lower left corner and go left and right to allow easy adjustment and should only be a 3 minute print using minimal material. The material needed is only 0.29 grams. Enjoy
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
90° connector for square steeltubes 20 x 20 x 1,5 mm. 2 versions (90° and 45° miter).
Easy to print
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
With its 8 mm central hole , it allows Asian hornets to enter while preventing them from escaping. Smaller surrounding holes ensure non-target insects can safely exit. Key Features: Selective Design: Avoids trapping non-target insects.…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
During box or square breathing, you breathe in for the count of 4, hold for 4, breathe out for 4, hold for 4, repeat. This little tool is a tactile guide for centering your mind while you do the box breathing. Each side has a different…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I love to play with shapes to see what kind of patterns I can make. Then I just have to dial it back to something that is printable.
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Introducing the ultimate Drawing and Measuring set, perfect for students and professionals alike. It includes a ruler, a set square and a protractor, which has the essential trigonometry formulas written upon it. Note that, when measuring…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Kulatá krabička pro rybářské háčky a jiné drobnosti. Round box for fishing hooks and other small items.
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
Printable Engineers Square with clamping holes. Obviously this is not a guaranteed 45/90 degree square, but is suitable for most DIY applications. The GCode file is scaled down to 85% to fit on a prusa MINI
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
A disc as an adapter for the Rose ACROS Square Cockpit.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
https://www.aliexpress.com/item/1005005642898265.html?spm=a2g0o.order_list.order_list_main.29.4e661802C9ymvP
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
If you have ever wanted square hamburger patties, now is your chance!! Remember that PLA, PETG or many other of these plastics are not recommended for long term food applications . SO, print the Square Hamburger Press for your next cook…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for PETGSource material: PET
A simple, versatile base for cubes printed in vase mode! Makes an interesting platform for your experiments with velocity-painting, fuzzy skin, and other favorite tricks =) The center of the base was left open to accommodate a light…
Just a simple elegant vase that does hold water.
Print approx. €7.50–€9.16 excl. taxPreliminary estimate for one variant
This model consists of 3 parts. Please download .3mf file for getting seperated parts Base Plate with Body Player Head Bow and arrow If you wish to print this in single piece, please download STL file. Supported should be given if…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
A quick and easy bed leveling test made parametric, so you can open it in your favourite CAD tool and tweak the settings for your own printer. Default is based on the settings of an Ender 3 v2. The design is based of a model I downloaded…
Print the model with mostly standard settings and good quality filament. I used the following: Prusa Mk4 (IS) Prusament Galaxy black Default filament settings Default printer profile Prusa Mk4 IS 0.4mm Print settings 0.15mm STRUCTURAL 1…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I didn't know that profile plugs were commonly sold, so I quickly made one for the metal legs of the stool.
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a small adapter for (nominal) 9 mm square drive latches with handles or as a socket adapter. Key features: for 9 mm square drive latches e.g. used in transportation and various other applications on the other side both variants…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Use the top part from the original model. Not the cleanest result, but it works.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
SPST Square Rocker Switch (12mmx18mm) Housing with Power Supply Port. Designed as an enclosure for low DC voltage systems. Print at 100% infill with supports enabled. If you like what I'm doing here, please consider making a small…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for PETGSource material: PET
I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has…
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own custom art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
A square antiprism or anticube. A ten-sided shape made of squares and equilateral triangles.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I have a MK3.5 upgraded from a MK3S, and a Revo 6 hotend on it. When ever i change the revo nozzles i like to quickly check if i need to adjust the Z height slightly, that is what these squares are for. Each set of squares is one layer…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This model is useful as a Wolfcraft carpenter's square holder. This holder is prepared for the perforated wall steel plates produced by the Element System.
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Full size pans for watercolours. They have the same size as White Night pans.
Since i needed 16 Pieces of a machinist Square for a school Woodworking Project it was way cheaper to print them. Size inner angle: 40mm x 60mm / 1.5748in x 2.3622in Printed on a Core One in PLA+ (from RBD) My Settings: 0.20mm STRUCTURAL,…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The Sator Square is a mystical inscription that has been found in the Christian world since the 2nd century AD. The Latin inscription SATOR AREPO TENET OPERA ROTAS can be read in any direction within the square. There are many…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
10.10.22 Update: Added a second version were the nut in inserted to the print part way. This avoid any gluing and results in a clear print. It also had chambered edges to make tightening less painful. I have used the Mini Tablet Tripod…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
3D square for easy holding and glueing model components and get them perfectly joined. This tool will never get glued together with the model components ! (usage example included for 50975 “Toy Barn for cars/tractors with scale 1:50”)…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for one variant
Box Note 77mm Checklist stencil Circle, Square 2 X USB and 2 X USB-C
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
This clipping T connector is good for adding another branch to an already existing 1/2in square tube frame (example: creating a second tier sign). Prints best in PETG, no supports needed.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Soportes para sujetar una regleta de enchufes cuadrada La tengo en una estantería pequeña de ikea Los Gcodes están preparados para MK4 y para MINI+
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
The Latin inscription SATOR AREPO TENET OPERA ROTAS can be read in any direction within the square. There are many interpretations of the meaning of the inscription. See also https://de.wikipedia.org/wiki/Sator-Quadrat The model in the…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
I remixed the "Base_Card_Deck.stl" from 3D Printy my magic the Gathering deck. The box easily fits 100 sleeved cards plus sidedeck. I would use the “Support on build plate only” function of your slicer for printing these modells. Update:…
Print approx. €10.39–€12.70 excl. taxPreliminary estimate for one variant
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
I needed a way to organize my spices on the inside of the cabinet doors. This was my solution. Fitted to the Simple Truth square spices. Held up by 3M tape. My Build Settings Material: PLA Layer Height: 0.2mm Infill: 15% Grid Supports:…
Cover for square profile 60x60mm
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
