Counting matching models…
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
Remix of the remix by @percula I liked this design with the angled sides, because this minimizes the lightloss. The thing I changed was that I wanted the back wall, for less light spill. Also I made it 5mm taller to further reduce the…
Allows for the mounting of the large power bricks for the EcoTech Radion XR30 LED light fixtures (Meanwell GST220A36-ET AC/DC Switching Adapter). There are no straps so I wouldn't mount these hanging upside down from the underside of the…
EcoTech Radion xr30 1010 Aluminum Extrusion Light Mount
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
I needed an armorer's block to remove the extractor and ejector pins from my AR308's bolt so that I could properly check headspace. Options on the market run $30 or more, so I opted to design and print my own. Although not as strong as…
TP-Link MR3020 Wallmount in 2 Varianten: M4 Schrauben innen oder außen.
Basic wall mount for Cudy TR3000 router Preferred printing settings Material: any (tested with PET-G) Infill: 30% rectilinear Perimeters: 3 (1.2mm) Layer height: 0.1mm Solid layers: 12 (1.2mm) Supports: not required Nozzle diameter 0.4mm…
I made this 45° adapter for the display of the Creality CR-30. That when it is mounted on a wall, you can still easy look at the display with the wall mount from Nathan Bush. https://www.thingiverse.com/thing:5198715 All you need, are the…
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
This is an adapter to allow you to put a Micro Swiss NG Revo onto your CR-30 3D Printer. In order to get the Revo to touch the bed, and to improve print quality the entire shebang is angled at 22.5 degrees - so that the extruder splits…
I took some time and created a fairly solid direct drive mount that utilizes a BMG style extruder.
This is a replacement slide stop for the 3rd valve slide on a Bach TR300. Printed with PLA at 20% Infill.
Mount your Neptune Systems Auto Feeder (AFS) to the Ecotech RMS RX30.
Weller WLIR3012A adapter. It works with the original bolts.
Printer: Ultimaker 2+ Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament brand: Makerpoint Filament color: White Filament material: pla
Hiermit kann das Circuit-Board im Acrylrahmen beim Umbau eines kompatiblen Diodenlasers auf das Atomstack R30 Lasermodul oben auf dem Modul befestigt werden. Die Verbindungslinie der Spacer sollte nach oben zeigen (auch wenn diese minimal…
This is a Atomstack R30 mount. The rail clamp (for hight adjustment) is not with direct screw taping, because its damageing the laser housing. The screws are clamping the laser. Im using m3 brass inserts for more strength and long life…
Y-Endstop für Atomstack S10 Pro nach Umbau auf R30 IR-Lasermodul Prusament PETG
With the original X-Carriage i didn't get good adhesion, you surely know this problem. 20 degrees solved the adhesion problem but my prints looked terrible. So i tried a few different things and ecobra's files helped me a lot in that. A 5…
*** After using this for a few days i think i need to make it thicker to make it more rigid. it still works fine right now but it does sway lol I needed a bracket to hold the new Atomstack R30 IR Laser Controller board to the Z chassis,…
Atomstack R30 infrared laser module model
Print duration: 2h 30m Material consumption: 25.12g / 8.42m Rafts: Doesn't Matter, ideal No Supports: No (not necessary for me) Resolution: 0.2 Infill: 15 - 20% Filament brand: Any Filament color: Any Filament material: PLA
This is a remix of the excellent 3D Printing Friendly Garmin/Wahoo Quarter Turn Interface that adapts the mount specifically for the Bryton Gardia radar light . In addition to the quarter-turn interface for the radar, this version also…
Fork guards specifically for the CBR250r, which are 37mm forks. These are found on many other smaller retro and older Honda models. This should fit any with the standard 37mm forks, but the bulge diameter at the top may vary, and I am…
NEW MODEL!!! Specially made for working with the new Lid V2 AV box JetFleet-F6 / Thor300 plates to make AV box compatible with JetFleet-F6 / Thor300 ESC For 3mm copper/alum sheet. Small circles: tap M3 for stud screw. Big circles:…
If you require long lengths of Mini Trunking for your projects, this 20 x 10 Mini trunking can be printed on the Creality CR30 Belt printer, Although the model is 3.1 Mtrs long you can extend this by changing the Y axis. Prints fine with…
PurrPleaser3000 Single This is the PurrPleaser 3000S, an automatic cat feeder for a single cat. With this cat feeder you’ve got a complete project to build your own feeder which automatically dispenses food for your cat over weeks.…
The laser plates for AtomStack does have different dimension. With this adapter it is possible to use the AtomStack M50 laser in the base plate from the AtomStack R30 and AtomStack R30v2 without replacing the laser plate. Printed in PLA…
A quick release ceiling mount to use my Cudy Router as a Wifi AP with excellent positioning for a strong signal. One side screws to the AP using M3 Screws and a Nut and or washer to slide into the APs wall mount slots and grab a hold. The…
remixed to adapt to 2020 since there are no designs out there
Supports are only needed for the top part of the fingerpirnt sensor housing. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 15% Notes: Supports are only needed for the…
1 x TP-Link TL-MR3020 1 x 4g modem e3372h 2 x 18650 with strips soldered TP4056 USB Type-C with protect Dc dc boost converter step up module 5v 1 x Slide switch 2 x pigtail 2 x 4g antenna 8 x screw 2mm
Battery Holder - No 9v slots - Double CR3032 capacity - Groove to easier grab CR3032 - slimmer bottom (4mm vs 5mm)
For my taste the CBR's factory indicators are far to beefy, so I replaced them with some Barracuda Mini Vipers. But that is actually easier said than done, given the fact that there are no indicator adapters available that wouldn't leave…
This casing is visually dedicated to the Cudy TR3000 (AX3000) Wifi6 Router - which run on OpenWRT :) (Chinese or clean image) (but of course it will work with practically any device that needs 5v, and up to 3A) Inside we mount the UPS…
cam holder for the creality cr30 and Xiaomi xiaofang and Wyze Cam
A simple cover for a BR30 directional light shade that covers a portion of the light directionally. Recommended for LEDs I imagine it's a fire risk if it's a hotter bulb Print instructions Printing Bottom Up seems to work fine, the…
LR300 Grip Might not be the most accurate grip you could possibly get but it's free Version 2 Remodel - Grip has been remodeled to be more rounded and far less blocky, - Thinner than the V1, closer to being the real on hopefully
Fits 38mm carburetors, printed in TPU 100% infill, I recommend to use gasket maker on it and also to put metal bracket between mounting pad and bolts so it won't flex when bolted on (this flexing can be seen on picture). Edit: I put 5mm…
Key differences: Lamp Shade- 1.25x size, supports BR30 E26 bulbs, 40mm socket. Simplified base. Printed in vase mode Lamp Base- Taller, 40mm socket, cable cutout, added a base for the base Still uses the same connectors from the original…
God I hate power tools. osVAC adapter for using a sharp-tipped self-tapping 3mm screw that can penetrate the machine's connector walls. Print using random Z seam.
The R-30017 Aikion blaster is a type of blaster pistol available during the Cold War between the Galactic Republic and the Sith Empire and can be found in Star Wars: The Old Republic. Real size measures 460 mm long Very easy to print and…
Simple interface for Thor300 to mount onto GT controller box mount holes Printing Instructions Print upside-down, with supports for the recessed screw area 50% or higher infill for strength Once configured: Print the model ??? Mount that…
If you want to make a custom front footpad from something like a TFL Kush Wide for the XR style platform. Can be used for an aluminum backing plate and the footpad itself so the Thor301 status LED's from the controller are visible. Works…
This allows Ecotech Radion G6 or G5 lights to be mounted to series 40 aluminium T-slot profile Will allow to mount xr15 lights either orientation as the physical dimensions are a square. Allows XR30 to be mounted lengthways along the…
Die verstellbare Gasentnahme für HK MR308 / HK MR223 von Burk liegt verdeckt unter dem Handschutz. Bei der Verstellung der Gasentnahme hilft dieses Werkzeug. Die 5 Positionen sind auf dem Werkzeug gekennzeichnet und werden von oben…
A variation of p38bryan's original baseplate design! As per the description: I modded the interior design to reduce “overhang” that would sometimes grab the follower. Added dovetail style shim to eliminate need for sheet metal tab. Added…
Reason: Enhance some existing lights with some 3D printed slide over Christmas bulbs. A boring old canned LED BR30 light just sitting there… Cover it with a slide over Christmas bulb for some festive ambiance… USE ONLY ON BR30 LED BULBS…
I accidentally bought the Airsoft Artesian Legacy Rail instead of the standard, so I had to make a rail bridge to bridge the huge gap Comes with STEP file incase you need to modify it
2023/02/21: I have move to gravel riding, and improved this design for more demanding environment. Decided to use rubber band from Ravemen TR300 instead of building a Garmin mount on it. I like the Ravemen TR300 because it provide 58…
A stand for the Chassis Thermaltake Tower300 for Mounting on the Wall. Since I have limited floor space, I wanted to mount my PC (Tower300) on the wall. There is already an official stand for this chassis, but it needs to rest on a large…
Introducing the innovative Vacuum Bag Adaptor for the Eufy LR30+ Vacuum Tower - a smart solution designed to bridge the gap between convenience and cost-efficiency. This bespoke adaptor seamlessly integrates with your Eufy LR30+…
This project provides a complete solution for building a compact, vertical Meshtastic or Meshcore Desk Node . It is specifically designed to house a combination of an nRF52840 Promicro and the DX-LR30 LoRa module . The design includes two…
Receiver Mount Futaba R304SBE for RC Car Category: R/C Vehicles
Don't back down from this monster of an ice scoop, this thing doesn't play around. This is the best Ice Scoop you're ever gonna need; it makes the other ice scoops run crying home to mommy as it enters the Fridge as an absolute threat to…
This is a clutch basket holder I designed for the Honda CBR300R, but it also fits the other bikes that share Honda’s 286 cc single-cylinder engine. This tool locks into both the inner and outer clutch baskets. It stays solidly in place…
This will fit the Flexcut FR307 V gouge chisel I used TPU because it will give a bit when installing and removing from the chisel. Print TPU at 30 mm/s or slower.
This listing includes: ENNOID MK8 VESC Controller to Thor300 sheet plate mount. ENNOID MK8 Pro VESC Controller to Thor300 plate mount for the CNC PubBox. For the MK8 Pro mounting plate, I've included a split design for cheaper, 2d…
Replacement cap for AR3000-A2 / AR3000-A2G Dixon branded or Annovi Reverberi branded inline pressure washer water filter. Will likely fit cheap Amazon clones as well. Blend file included.…
Vacuum extractor housing for cnc machine. Printed PETG need supports.
I love the original design, but wanted to have additional options - in my case, a vertical foregrip. Shortened the handguard design to allow for this space. 2 designs allowing for a little more variation.
This will protect the chisel from damaging you or it's self. Would probably work in PLA but I printed it in TPU to make it easier to install and remove with a bit of flexibility.
This 3D-printed magnetic magazine holder is designed for securely storing a detachable magazine For a bolt-action hunting rifle Heym SR30 and SR21 Blazer Cal.308 Win inside a safe or metal cabinet. The angled mount allows quick access,…
R300 remix of Gauge 1 rails The snap-together ends are directly compatible with track segments made by Aster of Japan which are included with their live steam models. The snap-together track pieces are designed for PETG original tracks…
mini drone long range 18650 battery. motors 1202.5 11000kw flight controller betafpv matrix 1s aio dji o4 wide weight g
This is a cover to protect you and the chisel from damage. Fits the Flexcut FR308 skew chisel. This would work in PLA I'm sure, try it and post you make here. I printed in TPU to make it easier to install and remove.
This will protect the Flexcut FR306 gouge chisel from damaging you or it's self. I printed it in TPU but PLA will probably work. Try it and post your make here. TPU makes it easier for me to install and remove because of its extra…
This is a super lightweight and foldable receiver mount for the Futaba R3008SB including two mounting holes for the antenna-tubes (e.g. those http://www.ebay.de/itm/like/171635211111?ul\_noapp=true&chn=ps&lpid=106 ). For mounting to the…
Will fit the Thor301Box and slide ride into the original XR rails. Print with PETG-CF or Nylon ( covering sun exposed parts recommended).
It's used to mount a Cudy TR3000 on the side of the following 10" rack:
I needed a method to secure a mirror to printer that allowed me to observe print progress. I used Grainger parts but this could be mixed to use any mirror / screws you have available. Since this bracket was not visible I used all of my…
I have designed a mounting system to hold Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader, so it's not moving around when you're trying to use it. To fasten the mount you can use double sided tape, use the provided holes, or use…
This is a Remix/upgrade for the CR30-Roller thing:4729710. Since mentioned platform is buggy af i uploade it here. This pice acts as a endstop kinda thing on the last roller.
This will protect your Flexcut FR309 gouge from damaging you or it's self. Printed in TPU for make installing and removing easier.
Just a simple rack for ER30 collets to keep them tidy in the tool draw or on the bench.
For use a mini router connected to the MeLE miniPC to control my astrophotography equipment I designed this 3D printed support for the mini router TP-LINK TL-MR3020 to mount it on an aluminum bar (mine has a cross section of 20.6 x 4.6…
Modeled in Onshape. Designed to be printed face down. Onshape document here if you'd like to adjust it yourself: https://cad.onshape.com/documents/3342dc07a5ce1ed001122118/w/60e7d4bb90e559a6152d8030/e/77367aeb606284ae6d0f4b54
Edifier QR30 VESA support bracket
One thing that always annoyed me about my electric bass: the 9V battery would happily drain itself if you forgot to unplug the cable. This model solves that problem by adding a simple switch to the electronics cover, wired directly to the…
The part is located on the back of the headphones. The right and left are different, carefully choose the model you need. Different plastics are suitable for printing, depending on where and how you will use your headphones. It is better…
Simple but works, use 10x3mm neodym Magnets from amazon, glue them in and cover the back with a stripe of duct tape
If you find yourself banging your head against the wall because of the lack of foresight by the designers of your home, you're not alone! Upon attempting to install a Babelio R30 ProFlex at the top and bottom of the stairs in my home, I…
So, this was my dream project for the CR30 and i love it so far, but it comes with a bit of work. The only non-Extruder/Hotend requirement is a mgn12 linear rail on the X-axis. It should work fine when you find your way around the…
The printed part is just to hold together the RGBD sensor and the screen, with some screws. All cables go to a bag carried apart, that contains the Zero 4, the power bank and the USB hub. The sensor is mounted on an aluminium bar for heat…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
Fits 38mm carburetors, printed in TPU 100% infill, I recommend to use gasket maker on it and also to put metal bracket between mounting pad and bolts so it won't flex when bolted on (this flexing can be seen on picture). Edit: I put 5mm…
Will work for any R3XX series models. Printed in PETG for a bit of extra strength, as these APs aren’t exactly lightweight. Nothing fancy — just a clean, sturdy stand that does the job and keeps the AP upright. 🔧 Plans for future…
This project provides a complete solution for building a compact, vertical Meshtastic or Meshcore Desk Node . It is specifically designed to house a combination of an nRF52840 Promicro and the DX-LR30 LoRa module . The design includes two…
One thing that always annoyed me about my electric bass: the 9V battery would happily drain itself if you forgot to unplug the cable. This model solves that problem by adding a simple switch to the electronics cover, wired directly to the…
Will fit the Thor301Box and slide ride into the original XR rails. Print with PETG-CF or Nylon ( covering sun exposed parts recommended).
This is a clip to attach your Line6 Relay G10TII (used with Yamaha THR30II amplifier) to your guitar strap for use with a right angle cable adapter. My guitar's output jack is mounted on the side of my guitar which makes it difficult to…
The pick holder can hold 3 picks and a cable. The pick thickness I chose to hold is 1.15mm It's mounted in the front plate with the preexisting screws, on the right. Note that the THR30II speakers are not centered, and this is convenient…
Will work for any R3XX series models. Printed in PETG for a bit of extra strength, as these APs aren’t exactly lightweight. Nothing fancy — just a clean, sturdy stand that does the job and keeps the AP upright. 🔧 Plans for future…
![LR300 Grip [V2 Remodel]](https://media.printables.com/media/prints/7f1634b6-0f23-4c5d-8dbf-686f1eaeab9a/images/10476375_e54e825c-a5e6-43a2-b01a-c2a5f7d204dd_f963070c-eaaa-44b6-add4-19b6ca83d0c4/lr300-grip.png)
