Counting matching models…
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…
Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.
Punch button for the HDR50 Gen2 (the CO2 cylinder percing button come with a different design in gen2 then in gen1) In the “wait position”, the punch button is “twisted” (something around 27,5°) When the punch button is hit, it turn and…
Passend zum osVAC System hier ein Adapter F32 auf (Außen-)Durchmesser von 50mm. Da ich in meiner Werkstatt eine Absaugung mit HT-Rohr (DN=50mm) verbaut habe wurde dieser Adapter konzipiert. Damit habe ich die Möglichkeit einen F32…
Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from…
Eine Halterung für 2 Magazine der Umarex HDR50. Das Magazin kann an eine Picatinny-Klemme geschraubt werden (3 Stück DIN912 M3x10 und 3 Stück Einschmelzmutter M3). Für die Klemme werden 2 Muttern DIN934 M3 und 2 Schrauben DIN912 M3x30…
Double horizontal magazine for the HDR50. The possibility of mounting on the top RIS rail allows you to place other accessories on the bottom (for example, a flashlight or laser holder - models available on my profile). Remix model:…
An HC-SR501 PIR component in step format for use in your own designs.
This cupholder design solves the issues with the horrible cupholders in the first gen Mini Coopers. These have inserts to hold everything from big handled travel mugs all the way down to a skinny red bull can. Having used the original…
This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .
LED flashlight holder for RIS rail with screws. Perfectly fits HDR50 (Umarex) on the top rail. Fits flashlights with a diameter of approx. 24.5 mm. In addition, 2 cylinder head screws M3x30 (preferably black because of the optic) are…
Created this to allow for installation of the Power Acoustik CP-71W in my R53 Mini Cooper. The radio is a little taller than usual and the regular dash kit (Metra 99-9302) has two guides that stick out on the top and bottom, not allowing…
This is a keychain I made to help support the sierra college car club at their cars and coffee, the version I made had the 115 racetag on it and some additional details, however I decided to strip those details and just upload a stock…
This is a phone mount for R50-R53 Mini Cooper. It bolts in place of the normally broken cup holder. You didn't need that cupholder anyways, this is way better. The holder has a boss with a hole that can be tapped or you can press a…
For my project I needed a articulated mount for the HC-SR501 PIR senor. The base plate can be attached with M3 wood screws. The coupler needs to print with support. What you need: 4x M3 heat insert (I used M3x5.7mm) 4x M3x8 screw 3x M3x12…
Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! Add a nice-looking keychain or a silhouette of the sporty and stylish Mini Cooper or Cooper S. 0,4 nozzle 0.2mm layer, 2 walls No support needed.…
Intake Funnel with ø62mm inner diameter. Source files included. For Mikuni VM36-4 as sold by Kedo.
Put the hairpin in to a hole. Inventor sources included.
This is a mounting plate that fits into the Jung LS 990 system. The fingerprint sensor R502-F (waterproof) can be inserted from behind and fixed with the clamp. The connection should be positioned downwards. The whole fits onto the Jung…
After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…
HC-SR501 PIR Sensor Case This thing is a simple bolt-on case for the HC-SR501 PIR Sensor, the case is designed so that it can slide onto my Panasonic TV and face the rest of my room. The case was designed using an open source step file…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
osVAC M32-R50 (50mm inside dimension) We used the part in this video: https://www.youtube.com/watch?v=fklvx3djcHE&ab_channel=Bastelsaal You like our work? Feel free to buy us a coffee! ❤
A common upgrade for 1st gen MINI Coopers is to swap out the steel trailing arms for the cast aluminum arms on the 2nd gen cars. In order to continue using your first gen speed sensor that inserts into the new trailing arm, you need a…
Dear makers, we would like to share our ceiling case for DHT22 sensor, together with PIR Arduino compatible sensor HC-SR501. Use two 2x4mm screws for fixing PIR. Drill hole 67 mm. We tested with PETG due to higher temperature resistance…
Put the 4.5 mm ball in to a hole. Inventor sources included.
Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…
Remix of the previous model that can be mounted on a RIS rail: a regular LED flashlight with a width of 24 mm and a point laser with a width of 19 mm. - LED flashlight available in every store - point laser…
This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…
3D print for Grow 503 Finger Print Sensor, For Home Assistant. link to manual for parts, soldering, and ESPHome software instruction: https://community.home-assistant.io/t/garage-fingerprint-sensor/312977 Update 19/07/2022: Created an air…
Small enclosure for a HC-SR501 PIR Infrared Sensor. Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to…
🇩🇪 Beschreibung (Deutsch) Abdeckung für einen Steuerkopf einer Simson S50, S51, S53 oder SR50 , wenn keine Bowdenzüge durch den Steuerkopf geführt werden müssen. Die Abdeckung wird idealerweise aus TPU gedruckt, sodass sie sich dank des…
This is a replacement bus for the gearbox cable connection of the Mini Cooper R50. In many cars, unfortunately, the old one breaks. Instead of buying expensive new cables, I chose to only replace the end rubber, which turned out to be a…
(EN) Backrest for the R500e cargo bike. This makes the little one sit much more comfortably. Can also be used to secure loads, as the bar can be freely adjusted and attached. The aluminum tube has a diameter of 25mm and could be purchased…
This model was too big for my printer (Bambu P1S,) and I didn't need the phone holder. I split it in half, added pegs and holes, and made a tab that fills the phone holder slot and more firmly keeps this thing together. If you really want…
This device clips onto the valve stem to depress the stem core to release the air from the tire. Install time (including removal of the existing cap) is around 10 seconds Deflates a tire (30 psi - 0 psi) in about 2 minutes. It comes in…
Holder for D1 Mini with shield and LEDs. Optional separator that can be wrapped in Aluminium foil to provide additional shielding
A replica of the Cookie Cutter muzzle brake from Strike Industries It is made based on the photo found in internet, so surely not 100% accurate. But close enough I think. In my case, I mount it on a HDR50 with conversion kit. So the…
Anschutz BR50 stock trigger guard This is free version with my personal spider logo on it. Version without logo, you can find here . This is a custom trigger guard I designed for my custom made Anschutz BR50 stock which came without…
Enclosure for OHS Authentication Node, R503 Fingerprint Sensor, and RFID Reader This enclosure is designed to house all the components needed to arm and disarm your Open Home Security (OHS) alarm system using either a fingerprint or an…
I wanted to design a double barrel mount for use on a TR50 T4E, HDR50 on the right side, inspired by the ARTENGINE model. Printed in PETG CF, 0.2mm layer, no support, 1mm skirt. You will need to break off the central part (green piece in…
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
I use this filter with my QR50H water pump, to prevent larger particles from clogging the holes in my bird bath fountain nozzle. It can be opened and sprayed with a hose for cleaning. The Fusion 360 project is included, in case you need…
Slightly extended version of NiiWek's nut wrench for a bit of extra torque and reach
50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.
This Radio blanking plate is based my other model https://www.printables.com/model/1249402-mini-cooper-r50-r52-r53-flat-radio-dash-kit Print with at least 20% infill. Things left to do - make both sides symmetrical.
A simple replacement spacer to adjust the belt width in the Umarex HDR50 holster. Fits without glue in a loose friction fit and is high enough to jam against clip when closed. (See pictures) Printable in PLA with no problems. Settings I…
- damper for Sidecovers for the Yamaha SR500 and SR400 - in complete you need four of these - best print in TPU to get some dampening effect (#goodVibrations) :)
You should use heat gun to form it to your car
This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
Tried to Print in PETG and ASA. I could not get ASA to work without warping. My final product was printed in PETG with textured build plate. I'm still learning to print smooth with PETG so you might have success with that. Prusa Mk 4…
I printed this shifter grip for my 2005 MINI Cooper R52, but the hole was too long to lock into the shifter, meaning the handle would spin freely. I designed this extension to go between the shifter and the handle, and keep it from…
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
Lights mount for my GPS support. I have printed it in ABS. Any strong material should be ok, I suppouse it will be better in ASA.
The model is still under construction!
A 50mm (~1.97 in) radius insert for the Corner Radius Jig by Warlog . This is the largest possible radius for that jig without making the full arc non-continuous. Included some extra files for easier remixing than the original model. The…
I created a model based on the original gear and printed it with a 0.1 mm layer height. Keep in mind the plastic shrinkage—it may be necessary to slightly drill out the central hole for a proper fit.
Print setting recommendations: PETG or better .16 layer height 2+ walls 10% Gyroid infill No supports required Most important thing here is the filament type. Don't use PLA. This is going in your car, it's going to get hot in there. 2…
hdr50 magazine using for paintball or training rubber bols
I'm on and off tinkering on my NSR50 project bike. I want it to be as stock as possible, but original carburetors are surprisingly hard to come by (or ridiculously expensive), so as a temporary solution I designed this custom spacer to…
My recreation of the the cup holder ring for the rear cup holder of the R50 R52 and R53 Mini cooper.
I built this since I didn't have the money to buy a normal camera cage. It uses a ¼-20"¾ and ¼-20"5/8 screws to go in¼-20"¾ and ¼-20"5/8 screws to fasten to the side and bottom of the camera. Along with 3 m3x18mm screws to mount the side…
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
12.5mm height on the outside and .5 degree slope. I did a 50% infill and if I see cracking I will reprint at 100% infill. I did a few test fits and found while my math said I needed a large slope it didn't translate once I did the first…
Designed to fit the Army Armament R504, but probably fits other HiCapas as well, as long as they have a threaded hole on the mag release. You will only need a small screw to fit the hole. Included are 3 STLs, a plain one, one with…
Hello everyone :) Attention SIMSON SR50 fans. I have designed a very cool string art stand with SIMSON SR50 LOGO for you. Both the stand and the SIMSON SR50 string art are very easy to print and use very little filament. The principle…
the r100 is a small camera and a grip felt like a necessity, this one is great however my fingies dont fit so i reverted the grip to the original smooth one while retaining the changes to the mount screw and battery cutout.
beep beep Category: 3D Printing
Anschutz BR50 butt plate This is a butt plate I designed for my custom made Anschutz BR50 stock which came without trigger guard. My custom made stock is a clone of Anschutz BR50 U7 stock.
I designed this bracket so that the HDR50 can be mounted either on a door inside a cabinet or underneath a cabinet. It can be printed in mirror image if you prefer a right-handed version.
Photos description : print the model (Petg) clip the reflector ont the 3d print and pass through holes twoTy-rap collars chose a basket bar to attach it Find my watch holder for the Decathlon cargo bike R500elec here :…
Use tree support, 15% infill
Air intake adapter for the aprilia SR50 Moped. This adapter allows you to fit dirtbike and moped cone filters onto the moped. Its supported from one of the screws holding in the wheel cover.
There is hole for some cables and also there is space for neodymium magnet. Im using esp8266 and ESPhome. Made for wall mounting
After replacing my brake discs with such that are only available as a 6-bolt version which forced me to use an adapter, the original part of the magnet mount would grind on the frame of my bike so I designed this replacement part with…
Carrying handle for Fenix LR50R search light. In my opinion this light should come with handle equipped as pretty much all the high power search lights do. This does exactly that, allows for better and longer handling of the light with…
Just a few parts I made while working on a CRF50F. It is two handle bar end fillers to reduce help the grips survive a fall without having a hold punched in the end of them. I also add a small bushing between the rear brake pedal pivot…
Dual 5015 fan Dragonburner. It's rediculously overpowered. But it was fun.
I created a model that should work if you want to print the gasket in TPU, What I did was print the main model, then pour liquid silicone rubber into the area where the gasket goes and let it cure there...
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
Lens cap for the precious Fenix LR50R. Not sure how impact durable the Fenix lens is and saw few of these here for different models so ended up making one for this model. Got it right and tight on the first go with Fusion. I made it with…
Case for the HC-SR501 Motion Sensor with 3mm Screwholes. Category: 3D Printing
Printed with standard MK4 Input Shaper Structural Preset settings with Prusament PETG on a Powder coated Textured Plate. Designed for two 5 mm x 280 mm zip ties. This was intended for the Refresh 2005 and 2006 Mini R50 as well as the…
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…
Replacement part for the headphone attachment. Uses the original screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Filament:** Generic PETG Category: Audio
This is a mechanism for longtail bike Décathlon ELOPS R500 handails. This allows you to raise one of the rails so kids can easily climb in, while ensuring they remain securely enclosed during the ride. Assembly requires M3 and M5 screws.…
Simple Spacer for the NRG Style QR50 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
Dies ist eine zurückentwickelte (Reverse Engineered) Abdeckung, die vom Originalteil nachgezeichnet und für den 3D-Druck optimiert wurde. Es handelt sich um den "Front Fork Lower Closing" (Piaggio U. Verschl. Gabel) , der in der…
A drop-in replacement hinge for the Aune AR5000 open-back headphones. The geometry matches the factory headband curvature and uses threaded heat-set inserts for durable, repeatable assembly without stripping into plastic. The stock…
I needed to replace a lost key on my 1980 Yamaha SR500. I was able to disassemble the ignition and remove the pin tumbler, measure it up, and model a replacement in Fusion 360. I don't actually need the security of the key, but I did need…
My 2006 R50 Mini Cooper's battery plastic support failed. So I designed a part that fits on top of the metal support and pushes against the battery box. The Air box mount then fits on top of the 3d printed part and the Mini/BMW Bolt then…
- replacment dampers for the instruments - slicer: Cura - printing material: Generic TPU Nozzle 220°C, Bed 50°C - printing orientation: flat, not supports
Add these shims for toe in on your headphones. The washers fix play in the hinge.
J'ai dessiné ce support pour le HDR50 qui possède le support double barilllet. Imprimé en PETG. Il est possible de le fixer contre un mur, une porte ou un meuble avec l'aide de deux vis.
