399 models
19" rackmount holder for TP-Link PoE injectors like the TL-POE150S with outer dimensions of 54 by 24mm. GCODE File is sliced for the MINI+ with Prusament PLA and 0.1mm layer height.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Model 1U Zyxel halter contains 2 Volumes. Separate them and print them in a way displayed in the provided print files. You have to glue the parts together before use. It enables modifikation for other desktop switches and easier print.
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
I made a simple 1U rackmount bracket specifically designed for the Minisforum N40 Mini PC. You have access to all Ports aside from the headphone jack, which very few people use in the rack anyway. Dimensions: 13.3cm x 14cm
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…
Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…
I designed a 19 inch rackmount for my PiHole with the opportunity to use an 1.3 inch I2C-Screen. You need to print it with supports. If you want a screen and use it with PiHole, Id recommend using my script and instructions to get it to…
Intro I've designed this case as a replacement for my current home server. The drive capacity has increased so much the last years, you need a lot less drives to get the same or more capacity. My current home server is already 10 years…
Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…
The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
A 10" 1U rackmount for the UCG-Ultra with three keystone slots.
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
Printed with 20% Infill with PLA. maybe increase the wallcount for more strength. You need 8x M4x16mm inHex screws. Phillips and Torx screws should work as well
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
it is largely based on Foden's design , which it also fits together with. I have also made a model for the Unifi Switch Ultra (USW-Ultra)
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
Sept 8, 2024 Update! With the release of the Raspberry Pi 5, I will be revamping the design to better work with the improved accessories that the RPi 5 offers (such as NVMe drives). These changes will require quite a bit of reworking,…
I print some largish 10-inch rackmount shelves in PLA. Adapted these brackets to help with potential cantilever droops for one of the network switches with PSU power brick included on the 10-inch shelf, but should be easy to adapt to…
Update 2023-07-03: I'm updating this model slightly after testing it in the real-world for a while: Added higher rails to each side to better support the back-end Switched to PETG as the heat from my rack caused the PLA to sag over time.…
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router. It is a remix of TP-Link 1U rackmount housing for ER7206 router by calipsoii. I changed the backstop and strengthened the frame. Parts…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
Mikrotik router/switch ears for rackmount since they are so difficult to buy. Fits my CSS326-24G-2S+RM no issue and should fit other router/switches from Mikrotik The distance between the holes is 25mm.
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Raspberry Pi 4 1U rack-mount bracket by russross via https://www.thingiverse.com/thing:4125055 A bracket to mount the Raspberry Pi 4 in a standard 19-inch server rack. This will fit 6 RPi 4 units using Power Over Ethernet (PoE) in a 1U…
Simple rackmount bracket for Mikrotik hAP, hEX and devices with the same formfactor(slightly smaller than hAP ac). Optional locking bracket also provided. Successfully printed on a Prusa MK3S using - Prusament PLA recycled - 0.30mm Layer…
NOTE: I do not own one of these switches and designed based on provided measurements. If you own one of these switches please provide feedback on fit. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm (or longer)…
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
This model utilizes 1 ⅓ rack units (U) and offers support for securing the NUC using screws. Ensure the front side is oriented downwards when printing. Dieses Modell beansprucht 1 ⅓ Höheneinheiten (HE) und ermöglicht die Befestigung des…
I will upload an actual photo as soon as the print is finished
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…
I've been wanting to add vertical cable clips to my rack, but most of the solutions I saw took up more than 1 screw, which made the printing complicated. I was able to bore out the mounting hole of this design to 6mm to fit most standard…
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN…
A 19" rackmount for the US-8 switch from Ubiquiti. Both parts are screwed together with a screw and nut. Glue is not needed. Is best printed in PETG or a more stable material. I have used 5 perimeters. There is a cutout for the LEDs that…
Based on the very good model of ER605 & OC200 Rack Adapters (V2) by Sorcier, I remodelled them to fit 2x TL-SG2210P. It's a heavy device, and 2 of them in this pair of brackets are recommended to be supported, either by support angles or…
This model can fit an ITX Motherboard and 2 80mm fans in a 2U form factor. Model includes some holes for zipties to manage cables. I've included an optional backplate that can be modified to suit any cutouts you may want. Bill of…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
This is a remix of this great mount, Remixed to fit 19" Rack, adapted mounts from @Mauker that way you can use his blanks/modular if you only need one mount. There are 2 models 1 with the original back stop 2 without Back stop that can be…
compact with small margins for computer hardware. keyboard switch as power button downside: standard pc chassi screws are to short to mount the PSU with. Because the front of the case/shelf is 3mm thick. edited the file so the motherboard…
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
I have a mess of switches and computer stuff. I saw people with 10-inch racks online and wanted to make one. After getting everything together, I could not for the life of me find a 10-inch PSU or power strip that worked for me, so I…
This is an improved version of my original enclosure. The honeycombs of the enclosure can be broken out if desired. Supports are not absolutely necessary, but I have used some on the housing for the guide grooves and on the fan holder. In…
This is a re-upload from thingiverse and is NOT my design. all rights go to Ameno_TheCat on thingiverse. Here is the original description: "Hi, this is my 2U Rackmount pc case. You can only put a Micro-ATX motherboard with a very small…
Tipp: genug Infill wählen - (zB. 40% Gyroid) Verschraubungen mittels threaded inserts & M3-Schrauben. Keystone-Rj45-Koppler einfach einkleben. Schrauben unter der FortiGate habe ich in meinem Fall weggelassen, da diese platzbedingt leider…
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.
Raspberry Pi 4 2U rack-mount bracket by russross via https://www.thingiverse.com/thing:4078710 A bracket to mount the Raspberry Pi 4 in a standard 19-inch server rack. This will fit 12 RPi 4 units using Power Over Ethernet (PoE) in a 2U…
Made for UPOE-AT, but may fit others. Print settings: 0.2mm layer height 3 walls Bridge settings = on
Shorter Mounting Design This custom mount allows you to securely install an HP EliteDesk 800 G Mini PC within your 10-inch server rack. The remixed design provides additional support by assisting the PC from the back of the rack, reducing…
10 inch rack compatible mount for the Lenovo m720Q will (Likely) fit any M700 series Lenovo. Comes with Keystone mount for easy networking. Not recommended to be printed in PLA as the mount will split around the rack-ears. Higher infill…
Simple rackmount bracket for Mikrotik hAP ac2 Material: ABS Layer Height: 0.20 mm Nozzle: 0.4 mm
This adapter allows you to rackmount this TP-LINK PoE Switch. It holds both the device and the power adapter. There are no problems with airflow, so the switch doesn't overheat. Simply join the two parts with long screws and it will hold…
I recently purchased a new Ubiquiti Edgerouter for my home network, and couldn't find a rack mounting solution. This is what I came up with to solve the problem. v0.1 my first attempt needed some filing to fit the front plate of the…
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)
This is a rackmount that can be screwed onto the side of a Sophos XG / XGS 106/107 device. It will likely fit on a few of the other smaller variants too. It sits pretty close to the rack side, and thats for a reason - its made to work…
24/08 V5 added. All now printed and fitting 26/08 V6 Rear added width guides. 26/08 Added Shelf Support. 2 M4x4x6 heated insert. 2 supports needed each side and something to bridge between to make a shelf.
UniFi Switch US-8-60W poe 10 - Inch Rackmount, i also made this for 19 inch. There is a model with cut-outs for Led light, an one without.
I needed this great mount in a 19" Rack, adapted the mounts from @Mauker so it fits a 19 inch rack with Modular/blanks Rack Mount from him to. For Mac mini (2010-2023 generations Parts 3x M5 screws 3x M5 hex nuts 4x countersunk 2.9 mm…
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
Did a super quick remix of the original work made by Q-tec to add the power cord from the back of the device instead.
I needed to rackmount a G1 mini into a 19" rack, but could only find the G3+ version, or a G1 version for a 10" rack. Using these models, I was able to remix them into a version where I can have the G1 on the right side, and either use…
I like the design of Hermann S for the Lenovo Tiny Mount. So I adapted the model for my Dell Micro 5050. It should also work for other Dell Micros. Print as separate bodies!
This is a 10" rackmount for keystones as well as separate accompanying panels for labelling said Keystones. The label strip can be placed above or below the Keystone panel. Required hardware: Screws and cage nuts that came with your…
This is a rackmount adapter for Ubiquiti Cloud Key Gen2 Plus. The rackmount adapter is printed in four parts: Cloud Key carriage mount (left mount) Cloud Key rear hook Middle rack piece with keystone jack Right rack piece (no changes from…
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
This is a fitted 10" rackmount for the Mercusys MS108GP POE switch. The Mercusys MS108GP POE switch is an affordable switch for basic POE functionality, for instance Raspberry Pi's, Home Assistant boxes and smart home boxes. It also fits…
What is it? The base idea is adding some flexible / modular kind of cable management to your rack (or anything else featuring a ~6mm hole) utilising common rack accessories. Just add a velcro strap (or cable tie or whatever) of your…
This version does hold the G1-G3 models the best, but ultimately I came up with this redesign which fits G1 through at least G6 if not all HP mini PCs…
These are rackmount brackets for the Allen & Heath DX168 stagebox.
Huge thanks to Spekkie3D for providing me with the STEP file. I have remixed he's left blank to be able to mount the powerbrick of the HP Elitedesk. Hopefully it's usefull to someone.
This model is based on the one by Pete Edwards and includes heat insert spots, so that it can be used like the original mounting brackets. I included some holes to suit M3x5x4 heat inserts, in just the right spot to use the mounting…
Din Rail to 19 Inch Rack Adapters, You need to print 2 of these parts and the following accessories 1x Din Rail 2x M3 Bolts 2x Washers
Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.
A reproduction of the Mikrotik K-79 for two switches. It requires heat set nuts for M3 bolts. It's a tight fit so you need to use the thinnest possible nuts. You can just take the single model and mirror it on the X-Axis or there's a .3MF…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
A 19" rackmount bracket for the TP-Link TL-SG116 (and TL-SG116P PoE) Switch A few tweaks to the original to refine the model. Notably: Section lengths adjusted to be more evenly sized Now easily fits on an Ender 3 V2 bed Provides more…
Dear fellow maker, I am happy to present to you: The many-pi-rack. This is a 19" wide, 2 HU rack mount system for raspberry pis. It should fit all the Pis in the default form factor (A versions not included). Additionally, it features…
These are three rackmount trays to hold my homelab components. 2x BeeLink S12 Minis 1x UCG-Ultra 1x FlexMini switch I modeled the front plate and trays together and split them in the slicer. The front plates will barely fit a standard i3…
Mounting a Blackmagic Design BiDirectional SDI Converter to a DAP 2HE 19" Rackmount . Combine with other available Parts for RasperryPi and others. Replace the existing M3 screws on the bottom with two M3x8 or better M3x9
I made a slightly Jank 10-inch mount to for 4 Raspberry pi boards in a 1U formfactor. it fits both Pi 4B and Pi 5. Mounting holes are made to fit the M2.5mm x 4.0 heat inserts from CNC Kitchen. M2.5x6mm screw seems to be a good fit for…
This is a 10in rackable bracket for the Aoostar WTR Pro. The NAS rubber feet need to be removed prior to placing the NAS in the bracket! DISCLAIMER: This was designed using Tinkercad and the geometry is very imperfect. Keep this in mind…
This is a fitted 10" rackmount for the ASUS NUC 14 Essential. It has cutouts for ventilation as well as M3 screws if you want to affix the PC to the mount. Required hardware: Screws and cage nuts that came with your cabinet, nothing else.…
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Rack mount for an 19 Rack for the Soundcraft Ui12 The manufacturer only produces rackmounts for Ui16 and Ui24 Uses 4HE of height PLA and PETG can be used for printing On the right side there are two spaces for XLR-jacks - i use them for a…
This is a bracket for mounting a MikroTik hAP ax2 router inside a 19" rack. It utilizes the stand included with the router for providing solid mounting by screwing it to the bracket. Note: This is a router. Putting it in an enclosed metal…
Edit 2023-04-11: Updated to trim 17.5mm off the inside slide, so should work better with the updated box models. --- This is a remix of MyStoopidStuff 's modular rackmount design . Specifically, this is a model to support the PCEngines…
This is a 3D-printed rackmount frame designed for the GMKtec Mini PC (model 3 Plus) — but it can also accommodate other compact mini PCs of similar size. The design features: Modular 3-bay layout — holds up to three mini PCs side by side…
Someone in the comments of the original asked for a version with only 2 keystones, so here it is!
![TP-Link TL-SG116[P] Switch 19" Rackmount Refined](https://media.printables.com/media/prints/1021334/images/7887405_3fda38da-970a-49b7-aa70-83109d4b464d_811f64f1-aaa8-45e8-ab1f-f10d4ae08c63/img_20241014_235535.jpg)
