139 models
I have added the material name on the side so that users (medical staff) know what material they're dealing with and how to sterilize the parts best. PETG, ABS, ASA & PLA should do for most of the people.
I designed a Rubber Band Clip for the RC3 Faceshields since we produce them in our makerspace and thought these would be more compatible with different rubber bands. Edit (07.04.20) : We found out, the 20mm V2 clip is basically crap.…
This Mask is a simplified version of the original RC3 Mask by Prusa Printers. It requires only one SINGLE punch with the perforator into the A4 laminated paper. It simplifies and speeds up the assembly. You can convince yourself by…
Improved model (1 hour print time savings) without loosing any comfort. Includes alternative laser cut head strap (instead of elastic) but compatible with both. DXF file for US letter size transparency film but with original European…
Update! There are 3 versions of the file. hybridv3_8.stl - This version (pictured) uses 6 posts that work with a US 3 hole punch to adhere a clear shield to the visor. Simply punch once, then offset the next set of holes by an inch.…
Compatible with RC3 windshield. More constant wall thicknesses, less holes, less extrusion start/stop and idle movements. Reduced weight of upper part. More flexible shield bar - easier assembly. Print instructions Upper part prints OK…
I made this for my DJI Neo. This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode. The included print profile enabled fuzzy skin which I found…
Gimbal protector for DJI FPV RC3. I swapped over to use longer adjustable sticks on my controller and wanted a protector that fit them. This one also has a print in place hinged clasp to lock it on. I have included files versions for the…
This gasket is printed in tpu. Layerheight 0,1 First layer 0,1 not sure if it seals 100% but it will be dustproof and you can conceal a hole thats a little too big. Designed by Q-Tec Prüfgeräte GmbH
# RC3S - Rotated Customizable Spool Support Structure --- ### Remixed from 3 Sources: - [Anycubic Kobra 2 Pro - Rotated Spool Holder - V1](https://www.thingiverse.com/thing:6387319) by **Sbaro89** - [Anycubic Kobra 2 - Rotated Spool…
Some ski resorts require wearing a ffp2 face-mask in ski lifts. This clip has integrated magnets, this makes it easier to put on the mask when wearing gloves. My friends tested it during a ski trip, #verified design. Let me know how it…
I made this for my DJI Neo. This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode. The included print profile enabled fuzzy skin which I found…
original text: “This case groups the goggle and controllers together so the Neo can be FPV mode-ready, while keeping the Neo itself available in standalone mode.” the uploader uploaded a Bambustudio 3mf file which isn't compatible with…
The original level meter of the Telefunken RC300 cassette deck had bonding issues and was not repairable. Therefor a replacement was needed. There's a LM3915 audio level meter solder kit or already soldered module which can be used as a…
The 64T GT pulleys I had for my assembly had 25mm hubs so I modified the prints to fit. Must remove flanges from pulleys!
High-grip wheels used to improve the traction of the robot mower in wet and sloped conditions.. Fit only with Robomow RC304 Print instructions No support needed
Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…
This is a high-fidelity, dimensionally accurate 3D model of the OEM seat cowl for the Honda VFR750F RC36 gen2 motorcycle. This project addresses the common issue of sourcing undamaged original plastic components for classic motorcycle…
General This is a replacement for the Land Rover Series Gearbox Top Cover Gasket (FRC3776) which is often only available as a cork gasket. You can scale the z-height of the model if you need the gasket to be thicker or thinner or you can…
Enclosure for RC3563 Battery Tester / Milliohmmeter Available, among others, on AliExpress as “RC3563 Battery Voltage Internal Resistance Tester” or “RC3563 200Ω 100V Handheld Portable Battery Internal Resistance Voltage Tester.” The…
MAJOR UPDATE V.7.0 After some suggestions new outing system is done. Now it's super easy to glue things together. File is ready to print as one part (Anycubic Kobra Max3) or on any 256x256x256 printers (such as Bambu Lab A1, P1, X series…
Gimbal protector for DJI FPV RC3. I swapped over to use longer adjustable sticks on my controller and wanted a protector that fit them. This one also has a print in place hinged clasp to lock it on. I have included files versions for the…
Ordnung auf dem Schreibtisch! Diese speziell angepasste Gridfinity-Halterung wurde exklusiv für die Fernbedienung des Flexispot RC3 entwickelt und hält sie stets griffbereit an ihrem festen Platz. 🔧 Eigenschaften: Kompatibel mit dem…
I have two separate base games, one for Arc 1 and Arc 3. Fits sleeved cards and 160 points of geek up bits (8 tens, 10 fives, 30 ones). For points, it will be tight for a 5 player full XC game if everyone focuses on production, but I…
Being member of makervsvirus.org I was asked to provide a face shield with an extension in order to be able to wear magnifying glasses behind the shield. It also should have a cover at the top. The designs I found were either to heavy or…
Based on my band for the Prusa RC3 face shield https://www.thingiverse.com/thing:4268164/edit I adopted this design to fit now to the multiple clones of RC1 RC2 or RC3 face shields which are using an adjusted strap hook geometry. I also…
Since there are now tons of face shield clones at thingiverse I decided to design a face shield band which allows a comfortable wearing of the no clamping versions like the very popular Prusa RC3. The belt should fit even lager heads up…
Replacement Batteries are expensive and of low battery quality, so I decided to make my own using off the shelf cheap AA NiMH 1,2V Batteries. They are like the original cells but a bit longer, so I had to redesign the shell. I used the…
for people like me, very bad in aligning things, this might ease your situation - a Prusa RC3 face shield punching jig! Place your hole-punch in the frame (done for a LEITZ 5008 - quite common in Germany...) and align your foils on the…
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
UPDATE: There was an issue in the RC3 version, Prusa fixed this in RC3.1. I changed the gcode and 3mf file here as well to this updated RC3.1 design. This file can be used to print 8x the RC3.1 version at once on your MK3/MK2.5(s). Print…
15mm Tall Version of the RC3 headband. I even found a chamfer that Prusa missed on the bottom of the headband.
repair support under pin Print instructions Supports are not necessary. Print with at least 3 perimeters, about 30% infill. Ideally, print it from PETG.
EXPERIMENTAL I do not yet have a proper shield to test these parts with. I've made paper mock-ups from the Prusa RC2 shield template and all of the holes line up as they should, but I can't 100% confirm this design. Primarily, I would…
EXPERIMENTAL - UPDATED 2020-04-02 I've tested this with a 0.010" / 0.25mm shield, but not with the thicker 0.02" / 0.5mm material called for in the original Prusa design. Primarily, I would like to confirm that the lower reinforcement…
This is a modded version of Prusa's face shield to attach 5mm elastic bands and adjust the size to the wearer´s head. Update: added .step and .f3d files, feel free to adjust the design to meet your own needs. Update 2: added modified RC3…
A remix of Prusa's RC3 Face Shield with added top cover and brief instructions on a way to use a 2 liter soda bottle for the clear shield. Print instructions I have seen several comments/requests that the headband have a "closed" top part…
I remixed the original Prusa RC3 headband to make it only 15mm tall and I also flared out the tips to improve comfort. Having tried on the RC3 headband, the ends always put too much pressure against my head. I found out that by spreading…
RC3 Shield, added a buckle for elastic or even IV tourniquet (credit Audoen Maddock, MD). Left the stud on if you want to use pre-perforated elastic. Print instructions Same settings as the RC3. 0.25 mm layer height, 30% infill, PETG.
Added a Hello Kitty emblem to the face shields as per a request on Reddit - https://www.reddit.com/r/3Drequests/comments/fps4cm/silly_request_hello_kitty_covid_headbands/ Also including a file by u/dreamSalad
This is the RC3 upgrade of "Prusa Protective Face Shield - RC2 - 5mm elastic band mod".
I've remixed the rc3 model to include three small tabs to hold a foam insert to fill the gap at the top . It's designed to hold 3/8" thick foam but in my testing with 3/8" EVA foam the frame becomes quite rigid, surprisingly so. A thinner…
This is a mod of the original RC3 Face Shield, which replaces the recessed "PRUSA" text on both sides of the frame with the words "NO STEAM." I wanted to help to print face shields to support PPE efforts during the COVID-19 pandemic, but…
Please read Prusa Research's original post "Prusa Protective Face Shield - RC3" for all best printing practices around sanitation before printing! Prusa Protective Face Shield - RC3 (Remixed for more reliable printing on not perfectly…
This is a slightly modified version of RC3, that can be printed on MINI. Parts need to be glued together. Superglue or hot glue-gun will suffice. There is also a 6-stack version for overnight printing. Switched the bump to be on the…
This is modification of the Prusa Protective Face Shield - RC3.2 - stack versions . It has added layer height modifiers to decrease the layer height to 0.15 for the bottom chamfers on each part. It only affects first three layers of each…
A little helper to cut a DIN A4 PET for the Prusa Face Shield RC3
This is a OpenScad version for fast print. Choose fill width to generate optimized model. The total wall thickness must be close to 1.8mm for good resistance (using ABS). # STL Attached for a 0.6mm layer width configuration.
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…
A remix of Prusa's RC3 face shield with: USA 4.25" 3-hole punch spacing (1/4" or 6mm holes) 15mm z-height (quicker print with minimal impact on durability) improved comfort near ears via 7.5° flare filets instead of chamfers to reduce…
This is a remix of the RC3 headband which uses U.S. letter-size plastic with a standard 3-hole punch. Hat tip to Avi Burstein, who did a similar remix of the RC2 design Print instructions Print with no supports.
The original RC3 headband STL file had manifold errors that caused problems with the Cura slicer engine. This file is repaired and works with Cura (tested with V4.5). Print instructions Same as original, just repaired the mesh
After delivering 50 RC3s to a local hospital I worked with them to further improve the design to address their concerns. With the RC3 they liked the comfort and its the ability to adjust to any head size but disliked the open top and…
Due to the need to print as many of these as possible, as quickly as possible, this is a version of RC3 that prints faster (and uses less filament). It still retains a measure of comfort because part of the band that sits on the forehead…
Optimized Prusa protective shield RC3 for lower material consumption. Printed headbands are donated to healthcare services in Czech republic by community around DDH Helceletova - Robotárna and JCMM. Despite how much material was removed,…
This is my try to recreate the shield in OpenSCAD, because with this Program anything is parametric. So this model can be changed very easy. In particular I designed this, because I liked the sturdy of the prusa shield, but in the same…
UPDATE: -Added the DXF file of the sketch to reproduce in laser cutter. -Template of the shield also updated for cutting it on vinyl cutting machine using 10 pt. PVC plastic. 13 apr. -Updated the template for cutting out the PVC / PET…
Version of the RC3 face shield to be made with A4 laminator sheet. Only needs 1 laminator sheet for entire face shield. DXF included for upper and lower visor template Band adjusted to 17mm high. This results in the part being the same…
This is the Prusa RC3 headband with Prusa RC1 cover combined into a single STL. The cover has been oriented in such a way that stacking of these headbands should work without problems.
This is a one-size-fits-all TPU strap for the Prusa RC3 Face Shield model. It is 273x30x1.5mm, so it will fit on any 30cm or larger print bed without having to print at an angle. Takes roughly 30 minutes to print with the settings listed…
Big thanks goes to Josef Průša and the PRUSA company for this design! Attension: Read the instructions before bring it in circulation there are some important things you have to notice. Use the following link to get those:…
It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…
I stretched the last pins to use the full width for a 12 inch sheet and to wrap around the face a little more after a suggestion from my friend who works at our local hospital. Print instructions I Printed in PETG, Nozzle 240C Bed 80C,
I was having blobbing and other issues while printing. I removed the logos and added printing discs to increase bed adhesion. Print instructions Print at 0.28mm layer height, 3 walls, 25% infill.
(Updated code/files 4/12/2020) A test making using openscad to programmitcally stack the Prusa RC3 face shield Here is a youtube video I made to cover the subject Also a recorded live session were I went over all the code bit by bit…
Prusa Protective Face Shield - RC3 add divots for large nozzle single wall prints no infill. Print instructions work in progress its made improvents to my print time but still testing.
This is a remix, which will add 4 small support pieces between visors to prevent separation during printing. Otherwise, it remains identical, so please visit the A4 remix for any extra information. Additionally, it contains cosmetic…
Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…
4 stacked Print instructions !!make sure you check your setting!! I printed at 2.0 layer height and 5 % infill. 10 % infill on the supports: a little tough to remove the layers in between the bands
This is a remix, which will fit two of the A4 Prusa RC3.1 faceshields from https://www.prusaprinters.org/prints/27026-prusa-rc3-a4-sheet-face-shield-remix-quad-stack along with adhesion pads onto the bed of the ender 3. Otherwise, it…
forced type of Prusa RC3 A4 https://www.prusaprinters.org/prints/27026-prusa-rc3-a4-sheet-face-shield-remix-quad-stack/files Print instructions Print at Prusa Mk 2.5, PET, 0.25 mm
A remix of the US version reducing the height from 20mm to 14mm for faster printing and reduced material usage. Chin piece file included.
I wanted to make a case to hopefully help protect my RRC3 LCD module from getting damaged/banged around as much. It has 2 pieces, a base and a top. The 2 pieces snap together as tolerances are pretty tight (perimeter is .5mm larger on all…
Mashed these together since the DtM Remix of the Prusa mask had better ventilation for fogless breathing. Print instructions I'm using .6mm nozzle and .30mm QUALITY.
It's a remix of clean shield strap. I've noticed that it was really messed up (don't EVER trust automatic repair!), so I've cleaned it and remeshed. Print instructions I've used Noctuo PETG Medical as it's most durable material of this…
Took the stack that was uploaded (THANKS MUCH!) and cleaned the text, split the bodies to 15mm and recombined. This is next on my printer queue, but looking at the layers in Cura, it seems OK. Shout-out to this community for being…
I set this interesting model in the stack and made a few corrections acc. to Prusa stack: models are slightly more apart from each other to separate them without surprises supports go away easier a few extra places for adhesion Print 8…
I only have elastic that is 3-5mm so it wouldn't have worked great to try to wrap around the original Prusa US shield design (although I did remix a clip for that). So, I modified the design to accommodate an elastic (or otherwise) band…
Economical, rapidly printing remix of Prusa RC3 face shield frame. Print instructions bridge_fan_speed = 25 bridge_speed = 60 deretract_speed = 0 external_perimeter_speed = 80% filament_cooling_final_speed = 3.4…
Due to the need to print as many of these as possible, as quickly as possible, this is a remix of RC3 US version, that prints faster (and uses less filament). It still retains a measure of comfort because part of the band that sits on the…
This is a cutting guide based on the laser cut spec diagram for the replaceable face shield sheets https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3 It consists of a upper drill guide as well as a lower base for…
The RC3 version of the US version face shield remixed to support printing of 4 shields at once, stacked on top of each other Print instructions I've tested the print at 0.3 mm with success. It's easy to load up a printer bed with the…
compatible with a US three hole pucher. Print instructions Use supports and common sense.
I like to name it an upgrade of RC1 to RC3. This RC1 plus, make the frontal shield more confortable. Is compatible with Prusa face shield cover. Thanks for sharing, Lorenzo
You can print forehead part in vase mode which will speed up printing a lot. Slightly better model in: https://www.prusaprinters.org/prints/29219-face-shield-in-33-minutes Print instructions Set this in PrusaSlicer even if you have 0.4 mm…
Covid Prusa shield for A4 with secure slips to shield and bottom Print instructions designed for A4 covers for comb binding and gap with standard hole punch
Strap that fits current Prusa Face shield RC3 design. Printed on MK3S using Flexfill 98A. Print instructions Printed using FlexFill 98A. Had to increase temperature from default 240 deg. to 250 deg (but could be just that my filament was…
I had already printed several Prusa Face Shields and could not source any of the elastic strap material. I had some 3/4 Inch (19mm) Lightweight Polypropylene Webbing lying around so I designed these buckles to fit the RC3 Version of the…
Same as the RC3 US headband and chin piece but without text to improve print quality and make cleaning easier. Print instructions Prints w/ the same settings you've successfully used for the original. I have been successful printing in…
This is an easy to print rack system custom designed to fit around the Prusa RC3. I noticed that from pictures online some people had been un-hygienically leaving them on floors or other unsafe surfaces when being delivered, waiting to be…
Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…
This is a modified version of RC3, that can be printed on MINI or other printers with small build plate. In this version the two parts can be assembled without glue. Print instructions Print without supports, layer 0.2 infill 30%
This model was modified for PRUSA RC3 of PRUSA PRINTERS. We reduced the height of the front band by about 60% and other for 20% from the original. We printed for donating to doctors, hospitals, and people in need. Print instructions 0.8…
A requested modify to USA version. Hope that this help someone. Thanks for sharing Lorenzo
A4 foil cutter tool compatible with Prusa RC3 and RC2. see it in action http://3d.hrg.hr/foil_cutter/use.gif
