454 models
Easy to get on the ring but won't fall off! Gcode prints one-at-a-time for less stringing!
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
I created this Thumper prop from images and clips I found online so it's not an exact replica but I believe it is pretty close. There is currently no functionality in this model but I am working on a motorized version that will hopefully…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This set of gauge can be used to measure the thickness of the brake pad without removing them from the car. Gauge range is 1 to 8mm. Gauges can be hold together using a M4 screw + nut. Accuracy will depends on the printer but checking…
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
I only found models with a lower resolution than what I deemed acceptable and I wanted to train 3D modelling a little. Printed with .2 mm PLA. Bottom green, top white.
This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…
Used on Foxbody Mustang to calculate needed offset for wheels and tires after adding fender flares. Measured a 18x10.5" wheel and 315/30 (25.5"x12.5" Tires). Has the ability to test inside and outside offset measurements for…
This is a print in place design for a tool to accurately size kid's shoes. It is as large as can be printed diagonally on a Prusa Mini+. Supports are required only under the slider in the circular cut outs. Either use a sharpie to color…
Inner Diameter Measurement Measurement: 2-22 mm 7 elements 2/3/4 5/6/7 8/9/10 11/12/13 14/15/16 17/18/19 20/21/22 Dimensions: length 76 mm Can be used as a key ring. Key ring eyelet: 3.00 mm. The inner mounting holes are increased by 0.10…
Never use the wrong bolt again! 😀 I built my MK3S printer from a kit, and then upgraded it to the MK3S+, and there are a lot of different length M3 bolts used. Using the wrong length bolt will sometimes work, only to find out a couple of…
Cache pour Boîte d'encastrement 67mm
Ein einfach Werkzeug zum Messen von Spiralen in einem Snackautomaten. Das lästige messen mittels eines Zollstocks o.ä. entfällt damit. Folgende Größen können damit gemessen werden: 11, 18,5, 25, 30, 35, 40, 45, 55, 65, 77, 80, 85, 95,…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Made a holder for my tools used when I'm mesauring for CAD-work. Slots for all kinds of measurement tools and storage devices. If you're lucky, yours will fit too! Printed in PLA, no supports.
On my lathe it's really difficult to identify dovetails wich one is 55° and wich is 60°
Plumb line piece needs to be printed as set of two and then glue it together, possibly with something heavy inside. Clips needs to be printed 5 times and glue to the sides of base plate. Other parts are not glued as can be folded into…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
These are the southern-hemisphere components. For the northern-hemisphere, you will need this model instead: Solar Motion, Position & Time Measurement Instrument - Northern Hemisphere by 3DMason | Download STL model | Printables.com…
This was a quick graduated cylinder for use at bath time for making “potions”
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
If you want to buy new ring and you are not sure with the size this is perfect tools for you to find it. I wanted to avoid different chart conversion so I just made ring with inner ring diameter in millimeters. So for example ring with…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
CALIBRATION MEASUREMENT 50mm - 40mm 30mm - 20mm 10mm total height 17 mm CALIBRATION MEASUREMENT FAST total height 7 mm Category: 3D Printing Tests
A rack for a Micro-ATX board. Perfect fit for my Asus B550m motherboard. Since I had a little trouble to find the exact measurements for the holes, a table with these and a DXF with the holes are included. Measurements both in Inch and…
IF YOU DOWNLOADED V1 - PLEASE DELETE AND USE V2 … Scaling in V1 was wrong … Sorry for that! We all know how it is … A bunch of screws on the desk … What kind of? Where is my caliper? Is it 12mm or 14mm? I looked around and searched for a…
Please don't forget to like - I want my Prusameters! 😄 ###################################### I love good tools, but got a little bit mad with using my nice caliper for calibrating e-steps / rotation distance, because I got inconsistent…
I dropped one of my screw boxes and had to return this mess of screws and dog hair back into something usable. Measuring each single screw turned out to be a time comsuming pain. So this idea of a credit card sized tool turned up. You can…
Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
This stencil lets you determine your personal ring size and test if your 3D printer is calibrated correctly in terms of dimensions (X and Y). The sizes on the stencil are ISO (8653:2016) sizes and mean the inner circumference of the ring…
I increased the size to my original remix of Uncle Jessy's Cosplay Caliper tool and add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for…
A small tool for easier body measurements, especially in situations where only one hand is available. Ideal for wrists, biceps, and similar areas. It is compatible with tape measures in centimeters and has a tolerance of approximately 1-2…
Ryden Bikes Smart Measurement and setup tool UPDATED Jan 2025 Updated links + New iOS app available Oct 2023 with new V6 version. This tool is useful for serious cyclists that have had a professional bike fit, or that have multiple bikes…
The Gridfinity Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use…
Do you have that pile of mixed up screws that needs to be organized? If so, then this is the tool for you! This print should ideally run at about 30-50mm/s with 0.1mm layer height or less because of the labels on top.
This is a tool used by reloaders to perform CBTO measurements. This tool is compatible with the Hornady Lock-N-Load® O.A.L. Gauge. Commercial versions of this tool cost +50USD yet this version can be printed out for 1% the cost. I…
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
Print with anything you have You will need two M3 nuts and bolts (15-18mm) Superglue will also work :) Plated STL is for 240x240 bed
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…
Original model by shooterhg on Thingiverse. This radius gauge makes it easier to measure your instrument neck. Measures 16", 15", 12", 10", 9.5" and 7.25-inch radiuses. There are 2 versions, with slotted and no slots. Print with 0.2mm…
Type: Protractor Size: 150 x 84 x 1.50mm
Pyramid Painters Cone - Stackable - Scalable in size and requirements Painter’s pyramids for creative projects Lift your project off the work surface while coating, gluing, or finishing. The pyramid shape stays stable and touches only a…
Fremen riding a Worm on Arrakas. Hook Free. Worm Surfing. Also added non-posed .obj if you would like to pose the figure yourself in mixamo.
This is a little help tool for ride height measurement. When you want to measure the distance between the wheel center to the fender, you might like this little helper. Just attach the tool and use a tape measure. The middle circle part…
This 3D printable design features a ring sizer, specifically crafted for accurate ring size measurement. The design includes three separate sets, covering a full range of sizes from 3 to 20, ensuring versatility for jewelers, hobbyists,…
The measurement refers to the inner diameter of the ring, expressed in millimeters, and is printed on top of it.
Improve the original document by bolding and enlarging the text for easier printing, and utilizing metal rings for bind.
This is a set of radius gauges to measure both internal and external radius of any surface. Even when you dont have the full circle to measure diameter. This set is designed for radius bigger than 20mm, up to 238mm. Here's a list of the…
This is a remix of Luther's Retirement Plan -wall sign. I wanted to add a third color to the sign so I did a negative extrude on the oval around RETIRED so that it was slightly lower than normal. This allowed me to use my slicer to set…
Compatible with M3*8 screws with a spring washer and washer. Uses M3 screws for every hole I printed mine without supports or rafts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
SV Werder Bremen Logo
Handy ruler for 40K games. Use pause at layer height to print in two colors. Recommend turning on top surface ironing for a smoother finish. I have updated the file and tweaked the layer heights so the color on the Sigil is not as pale as…
PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :) https://www.printables.com/pl/social/236468-nieuniknione/collections/194978
See screenshot for the printing orientation I used. But do what's best for your printer. This device clamps onto the tape measure for getting accurate measurements of interior spaces like drawers, cabinets and the like. Small tape…
a template tool for measuring AOE spells and distances for the 1inch system.
These spoons can be used for measuring small volumes e.g. in the kitchen. Values are: 0.1 ml 0.2 ml 0.5 ml 1.0 ml 2.0 ml 5.0 ml Note: The Spoons are not marked or labeled. It is advised to label them e.g. with a label maker. Notes: I used…
Because the commercially available tools for this job (meassuring bolt stretch while torquing bolts during assembly of an engine) are quite expensive and we already had a micrometer gauge at hand - i decided to go ahead and just print…
Model can be loaded in Bambu Studio and Orca Slicer. I have printed the part with letters facing down. PETG, 0.4mm nozzle.
This pin fits these 5mm pins. The original has the official key of Bremen (Germany) , but I also made a blank version so you can add your own design (initials or aviation club's logo etc.). Looks best in silk gold or silver. No support…
These rulers measure front-to-back edge-to-edge distances, i.e. the ruler takes account of the size of the base. Quick print: Choose the file 12inch_25+28+32mm_multipart_ruler-upload.3mf , which has 12 inch rulers for three base…
The Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use scale system,…
Hi, here is my version of the Townmusicians from my hometown Bremen (Bremer Stadtmusikanten). The Statues are based on a fairytale by the Brothers Grimm. many don't know that there is also a Statue in Riga, which was gifted by the city of…
Made it for a Friend. Happy printing Follow me on Instagram for more cool prints. https://instagram.com/lukas\_prints3d?igshid=13tcwrb498bas How I Designed This Made it for a Friend with Fusion 360. Category: 3D Printing
Tool to measure the bolt pattern of vehicle wheels. Wheel bolt patterns rely on measurement from the center of the bolt hole. This tool finds the center of two holes, then allows you to use a conventional measuring device to find the…
Screw measurement tool for mm screws, print the body in one colour, and the rest in another colour. Compatible with Gridfinity.
Viel Spaß mit dem Schlüsselanhänger LG Lion Print Settings Printer Brand: FlashForge Printer: Guider II Rafts: No Supports: No Resolution: 0.2 mm Infill: 70% Filament: Flashforge PLA Green - White Category: 3D Printing
For those who no longer have to have their days run by the clock, but rather just enjoy their time… Supports need for the backside of the clock face. Uses standard AA battery clock mechanism…
Simple tool to measure the distance between two holes, when calipers alone won't do. Simply print the slider and two pins that fit the size of the holes you want to measure. Insert the pins as deep as the holes allow and use the included…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Actual internal dimensions of the 3D model (tolerance included) 226mm x 151mm x 46mm Rulebook internal dimensions 225mm x…
This is a new model based on limitations of the model below. The large indicator has a large offset from the nozzle location so it cannot reach the entire printable area. Most notable, it cannot reach the rear tramming screw. This should…
Logo coaster with the logo of soccer club Werder Bremen. 80mm diameter so that it can be used even with larger mugs or bottles. 4mm overall thickness with filament change after 2mm.
A dummy model of Arduino Nano Every board
I receommend PLA two color print. A bigger version of the radius measurement tool is available at https://www.printables.com/model/1343346-edge-radius-measurement-tool-large-supportless
Original ONE https://www.printables.com/model/254751-multi-sort-a-sorting-tray this just a small remix adding a sort of M3 screws Length measurement with the tray itself so i can mesure the lenght of my screws and still in the same area.…
Here a little test to measure the precision of your 3D printer. Hier ein kleiner Test, um die Präsision Deines 3D-Druckers zu testen.
This tool helps with dimensions described in de the Voron 0.2 build guide ( https://vorondesign.com/voron0.2 ). Y-rails positioning 38mm Z-rails positioning 33mm Frame Z-Axis 58mm Frame Y-Axis 37mm It can also be used for 90 degrade…
I needed a more convenient way to measure the length of extruded filament, e.g., for calibrating the extruder, or estimating your actual flow rate according to Ellis' printing guide. So I made this small jig. It's a parametric model, so…
Space saving measurement tool holder [French Cleat] Designed to fit a plywood French cleat size: ¾" ~ 18mm Fusion360 model included
permet de fermer les boites d'encastrement proprement en D: 67 , imprimé en PETG sans support.
Incremental Marking Gauge for 1-200mm with holes for 2,8mm graphite leads like Pica Dry Marker
this puzzle was created for my 3 year old son liam suffering from autism who was diagnosed at 18 months of age, and a puzzle with very simple shapes to be fitted under the advice of the therapists and the pissocologist who follows my…
Develloped as a fully low-magnetic linear stage table for magnetic measurements. Relies on CRES rods for guidance of the X-Y-Stages and Brass rods for the Z-stage (can be cress in case the use of soft-magnetic material is allowed. M6…
I needed to measure a dimention that was inside a lip. Unfortunately I didn't have a micrometer. What I did have was a digital caliper, Fusion 360 and a 3D printer. They will clip on to most calipers you can buy on 'tinterweb (I have 3…
Measuring cups that can be stacked. The parametric fusion 360 file have the following parameters: volume - the volume in liters (as ml is not supported by Fusion) top_radius - top radius in mm bottom_radius - bottom radius in mm wall -…
I needed a radius gauge, which unexpectedly turned into a small math project. Many gauges use a 90-degree angle , which results in a factor of 2.4142 … that the measured value must be multiplied by. Reducing the angle to 60 degrees…
Update 4-4-2023: I finally finished my remix of the black core: US Amazon Prusacaster Core UPDATE 03-05-2023: actively printing a test print to see if parts fit properly. For fun I made a Ditto: UPDATE 03-04-2023: I made a negative of for…
These kind of tools are used to easily mark commonly used measurements when sewing (e.g. seam allowance, hem). I already have a similar store bought tool, but it lacks two distances I frequently use. So when I found the original one it…
Amazing simple and minimalist latches for your drawers. Are special to keep pets, children or thieves away!!! Everytime when i leave of my room and i leave door open my dog enter and open my drawers and she thief my papers xD!!!! so i…
This is a tool to measure up to 100 meters of rope, be it tied up or loose. It can also measure distances, by rolling the exposed gear on a flat surface. Finally, it can dub as a counter and a clicker toy. Let's see how we build it.…
With this you can calculate the angle between the two faces by measuring the distance between the two pointy ends. To calculate you can use the formula that is written on one of the parts. The formula is: angle = 2* arcsin( (x/2) / 100),…
Inner goes 1-15mm, outer goes 1-16mm. I liked others I saw here but I wanted a bigger set so my clumsy hands and eyes could see better and also the ones I saw did not have the inner measurements. Easily printed multicolor with filament…
An aquila styled measurement tool for Kill Team 2021
No need to use a scale for measuring the amount of spaghetti needed, just use this useful Spaghetti Measurement Keychain. Diameters 1 person: 2.5 cm 2 persons: 3 cm 3 persons: 3.5 cm 4 persons: 4 cm
![[French Cleat] Space saving measurement tool holder](https://media.printables.com/media/prints/561008/images/4496653_1490f681-5e7b-4e91-b7f7-c73e9ad50968/capture.png)
![Sewing Measurement Tool [mm]](https://media.printables.com/media/prints/470358/images/3853598_b51a24d7-766e-4a7d-84ed-d83b3592bac5/pxl_20230504_190855743.jpg)
