86 models
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
One of my son's friends has gotten into D&D recently, so I made a bunch of remixes of my models to be a little more D&D compatible, then printed them out and am giving them to him for his birthday. I figured that I could go ahead and…
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
Modified parts for https://www.thingiverse.com/thing:1568198: SirHa_Kurbel2.stl -> PNU_handle_grip.stl. Cut an edge to the top and bottom plate as at least my printer can't print circles in air Gehäuse_2_a1.stl ->…
Cross Brace: There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side. I moved the fan mount location to the corner, rather than the middle. This allowed for the addition…
My own remix set of great City Streets collection designed by Michal Fanta I wanted to expand the original collection with some new parts. For now, this "remix collection" includes: Water Culvert One piece Big Roundabouts Big Roundabout…
Because my children always broke off the plates when playing, I provided the corresponding parts with little thicker walls. The upper opening was more accurately adapted to the head. I also removed the gap on the right shoulder of the…
This is a collection of 3 different Maxis style stock parts. Most of these parts fit interchangeably for preference. You can print most of these anywhere between 15% and 100% infill for the desired durability/cost ratio you prefer. None…
A few remixes of the original xbox rubber feet. NOT FOR COMMERCIAL SALE! Category: Video Games
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
You probably printed already "Cat toy playing board pegs play" and your cat figured it out pretty well or you have more than one cat and the board is simply to small for both of them. Then you need this collection of extensions and…
The source marked this model as adult content.
This was remixed from 3D_Toys's The Claw Grabber II (Print & Play) I split the file for two color printing. I have a lot more designs so be sure to check them all out and follow me here at Polymathic Designs . Post your makes of this, I…
Message me if anything needs changing or write in comments
I added a third channel for an extra hair tie to keep cards from coming out of the wrong side on accident. One note about this…there are two versions. One version if you want to pull cards out using the cutout, and another version if you…
Use a M5 allen bolt and nut for the shoulder support. You can add a soft bottom protector (optional) printed in TPU with the following ORCA parameters: Wall loop = 1, Top and bottom shell layer = 0.Infill Giroide 20% and glue it whit…
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
Knife Sharpening Tool - Best of remixes Designed 2021-05-16 thing:4860228 printables:249523-knife-sharpening-tool-best-of-remixes TOC Knife Sharpening Tool - Best of remixes TOC Description BOM Sharpening Tips Buy me a coffee? Description…
identical to the original model but with a plus A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required –…
This design takes imo the best parts of gmelikov, Lok and 3Doodler's remixes of Qaz's amazing original to create one which strongly grips onto the win max 2 with the qol features of the other remixes. I've read a lot of comments about the…
Three new remixes for Panel 1 of the Geodesic Dome Cat House . Enjoy! Please see the original design for other panels and schematics.
Note: There is an updated listing with a newer version of this remix: https://www.printables.com/model/415298-lowrider-3-cnc-three-remixes-of-rail-blocks-181-mm Also note: Several of my designs for my CNC plasma rig are available here for…
Simple design and easy to use, i needed more control over the strip sizes due to different bottle thickness The width of the cut depends on the thickness of the bottle wall, as a general rule: Thickness Width 0.2mm 10mm 0.25mm 9mm 0.3mm…
Note: Several of my designs for my CNC plasma rig are available here for free. I had created a couple of different remixes of the LowRider v3 rail blocks (Y rail mounts), one for my router based LR3 (#1 — 23.4 mm), and another one for my…
A series of experimental BCAR remixes for the EX BCAR system. Many of these are untested. All are set at the 12.8mm squish setting except for CXCAR3-12-8_12-9, which goes from 12.8 to 12.9. The ones with increasing numbers are progressive…
The source marked this model as adult content.
Layer height: 0.12 or 0.2 Supports: yes
Several variations with Fusion 360 CAD file for more remixing.
Entirely reparametrized the original .STL file by @Mikester for the top part (card-wallet-top.stl) to get a proper NURBS geometry editable .STEP file . Closed the viewing hole to create a blank surface for further personalized REMIXES.
The source marked this model as adult content.
I think the Quick Connect system created by @Jack, to connect PTFE tube, deserves more deployments, so with his blessing, I made STEP files for just "Single Plate" and "Single Block" that are the perfect starting point for any remixes or…
These are some remixes I made for the Trivictus EasiestSCAR. https://www.thingiverse.com/thing:4967719 1: I made a Hexagonal version of the SCAR 2: For each SCAR variant, I made a version that uses a tightening plate and 2 4-40 screws…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
This is a base for creating your own holder/containers for Alexandre Chappel's 55mm storage ModuBOX. The files include the half size one and a full size one. I uploaded a base of a 2x2 and 2x3, those will qualify in most cases to hold…
Update: On v3 of the Starry and StarMoon case the shapes go all the way through, eliminating the need for a filament change. --- Update: I've added 2 new designs, a starry case and a moon and stars case. These are really cool to pair…
These models are recreations and alterations of The Stock Pot 's ESPHome Cartridge Player post. The main purpose for this upload is to make it easier to alter these models for the purpose of remixes. I think there could be some awesome…
was limited by bed size so altered some items. wanted to mount on the wall so made a shelf.
A whole raft of different X carriages for the Ender NG - See filenames for detail. +.2mm means that the centres of the bushings/bearings are an additional .2mm apart compared to stock - this can help when adjusting the gantry, using…
My personal remix of the Falx nerf blaster! Here's a brief summary of the changes: Mag Release (Smaller lever, better mag engagement, wider spring accommodation) Magwell (tolerance tightening, wider spring accommodation) Lynx Grip (Better…
Remixed a couple of different size of this to better fit inside of the Plano 3600 4-row boxes that I use. Category: Hobby
Currently non-functional pending pusher updates. The Diana feed lips are much tighter than Talon mags. Will likely use ½" brass pusher. Print all files from Blush except for Lower, Mid Body, Mag Release, and Ram Body. Print all three Lush…
Remix of falcon14141 's Mewburner. Removed the nozzle camera mount. Still the orginal RGB goodness! Added for both Knomi V1 and V2, check that you print the correct version. Note ; Error in slicer? just press repair and its good to go. No…
This keyboard stand was designed around my Logitech K270 Y-R0042 keyboard. I needed a way to free up desk space on a slightly cramped desk. I printed this in Inland White PETG with the following settings: 0.3mm Layer Height (Draft) 3…
A dust collection base ready for remixing to fit your own dust collection. Includes .step file for editing.
Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…
Previous make mentioned difficult of the outer filet, before I even printed it, remixed it with a chamfer on the exterior to avoid supports. Also added a variant with a relief valley for pens that have tighter clips.
These are various remixes of the Laser Bear Industries Dreamcast MODE Mount . version with removed SDCard loader hole for the use with an internal HDD/SSD only added 2 more 1.5mm fiber optic light pipe holes so you can see all 3 status…
Let me just say that I love CaseStudyno8 Lightsaber's. Darth Vader's looked the easiest to print and assemble, so I started there. Once I assembled my first printing, I decided I wanted a couple modifications. First I wanted the Power…
I wanted to use it on prusa mk3s, so I remixed it. CAUTION This is a MOD that requires modification by yourself to match the actual product. In my case, I cut a part of it after printing.
The source marked this model as adult content.
Just have some helpful mods I've been running for over a year: Platypus tails with Hex SMA locks underneath -- Helpful with checking a tight lock during pre flight checks without twisting the pigtail also Arm guards with tabs on built in…
Manta Ray tray was split. Print two of each side (left and right), they are not interchangeable. Spacers shape was changed and split in half. I recommend printing the spacers with top/bottom layer set to 0, then do an infill pattern at…
A collection of assorted upgrades for my Linksprite 1610 CNC. remix of Despair's Z plate to add a tab to tie the endstop wires to; wires connecting to moving parts like to break without strain relief. remix of Despair's X mounts to put…
These are designs adjusted for my Thinkpad T480s, and a Dell Inspirion 15 so far. Using these in my backpack so far, even the very thin one has a benefit of a taper and curve that prevents snags.
I loved the look of the "Twisted WiFi Controlled Desk Lamp" by Surrbradl08, but I didn't want to do all the work to cut and solder the LEDs, so I modified the CORE to take the LEDs in a twisting pattern which is much easier to assemble. I…
It's a remixes of this model https://www.printables.com/fr/model/111106-splendor-cities-expansion-game-box-insert. I have cut a hole of 103*97mm instead of card location and create this box that can handle my blistered card
Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…
I edited falconmultirotor's canopy and camera mount to fit the Runcam Nano. Print in TPU. The Nano should pressfit into the mount so that no other fixation is needed. Category: R/C Vehicles
a demonstration of a piston engine
A collection of MakerFarm i3v remixed and modified parts. I liked the knob, but wanted the dimple for pushing. Added the anti-rub groove to the extruder and a lip for the front bearing, keeping the rest of the stock extruder. Included my…
Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…
Created new Standoffs for the Stock Board. Added a Smoother Holder for 4 TL_Smoothers Using: https://www.thingiverse.com/thing:3351822 Added Stock Display to Front Top Panel Using: https://www.thingiverse.com/thing:3498745 Adjusted Front…
I noticed a lot of people were adding 3D designs to their remixes, so I thought it might be worth making a nice base model that better accommodates printing with the flat side up, by adding built-in 0.2mm bridges to the model. Customizing…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
This is a base for creating your own holder/containers for Alexandre Chappel's 55mm storage ModuBOX. The files include the half size one and a full size one. I uploaded a base of a 2x2 and 2x3, those will qualify in most cases to hold…
remixes the Ebb36 Mount with PUG support , form the Original models add a hanger for stronger
I was pleased with the original model from siggib on Thingiverse of the Baofeng Cup Holder, and made changes to use it with the Medline and Universal Wheelchair Clamp by Jay (@1legWarlord_1838072 ) here on printables : The geometry of the…
I think, it's kind of sweet :-) 100% and 150% model files. I find that 100% models are a little small. Update: Added alternative versions, remixes2 needs support.
I've had some requests for human versions of a few of my models, so I figured that I'd go ahead and put them together and post them in this one thing. As I make additional close-to-human characters, I'll humanize them and add them here!…
So I loved this original work, the unit boxes and stuff really helps keep things organised. I found that some parts were a bit thin so I reinforced them with thicker walls and bases - namely the Shadow Deck holder, card stopper and Nazgul…
The original version is designed for the flat section at the end of the ridged Intex hoses. I have a few hoses that have been cut and no longer have the flat section so need a larger diameter connector. I designed these to taper from the…
These are remixes specifically for the ANET A4 delta printer. All done in TinkerCad. There are four different tower configurations included: Optical Endstop, Closed Pulley, and Extended for Belt Tensioner Remix Optical Endstop, Closed…
I'll leave this up here, but I now believe this other remix is a better solution to this issue.. I would try this instead: https://www.printables.com/model/338542-x1-ptfe-tube-guide-to-fix-loading-issues-best-of-b This takes the parent…
Geoff997 on SlotForum did some clever updates to the machine, to improve the debris shield, as well as to make a standalone/portable machine that runs on battery power. Check out his posts on SlotForum here:…
i just remixed the OP's part to fit thicker shafts of 5/16" (about 8mm)
Options LHTCU_acar: made to work on LHTCU barrels EX_ACAR: made to work with ex bcar mounts (o ring required on the acar itself) acar-DARTZONE: made to replace the barrel collets on the Aeon pro and Nexus Pro foam dart blaster.
It will protrude about 4mm in front of the initial position of the mk3s nozzle. Also, the nozzle position may be about 1.8mm higher. BOM : two LM8LUU bearings seven heatset inserts, the same kind that is used on all Voron parts (M3x5x4)…
Moved the Cr-touch up 2 mm for better clearance. Don't forget to change bl-touch print config to #z_offset: 2.5
Introduction At the request of some members, I am providing a 'clean Leaf' so that you can work on your projects and make modifications. You can find all the necessary information in the main project: Modular Storage Tree The only part…
Can be used to merge with other existing models to add a peg to attach it to a Küpper pegboard.
Ender 3 v2 Y tensioner 10mm belt
![[ALCH] holder - base for remixes ModuBOX](https://media.printables.com/media/prints/671198/images/5277546_99bc1bcb-9467-44cc-b74e-7c0ed1b7210c_d13b511f-66cc-4d94-86cc-62e2e2020827/5cb4aeff5e33e7d7c187687f05ec0c4a.png)
