Counting matching models…
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I needed a VBus adapter for my Resol solar control system so that I could display it in HomeAssistant. The VBus adapters from Resol were all too expensive, so I decided to build one myself using an ESP8266. To start with, I opted for the…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
If you're one of the crazy ones who doesn't use the trackballs and they get in the way, why not replace them with these? (I've moved my whole operation over to DCTLs) These rings still allow to control the Y channel by interfacing with…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
---------------------------------------------------------------------------------------------------------------- Update Optional Storage Box I uploaded all files needed to store all parts for 4 players within the original game box.…
This is a high resolution scan of an antler off of a deer. It's about 12" wide by 17" tall but it can be scaled to fit your printer. I tried to set the scan in a good position to print, but some adjustment will be necessary. A great trick…
This extremely high resolution topographic globe of the earth prints in two halves, using around 350g PLA filament. It was created using blender, and adds small step at the coastline to aid with recognition of coastlines. The complete…
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
I created this column to be printed as a short display stand for some product photography on one of my company's websites . Credit is due to this artist and original model for the majority of the silhouette of this model. However, I have…
Original Post: 3d scanned by User @AgainstYou (Hans Peter). I thought It was super cool and wanted to make a big ones, but the resolution was too low. After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.…
I added some high frequency details like skin and stone to the original design, so it can be completely painted by drybrushing. For the paint job, i primed it black, then added some blue, green and light-blue paint with a lot of water so…
Accurate measuring tools are essential for successful 3D printing of anything that mates with anything else. While these calipers aren't as accurate as the real McCoy, they are handy when your Mitutoyo's are hiding elsewhere. They have…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
A funny desk item that is ideal if you have annoying work colleagues that disagree with you on everything. Printed in PLA with color change enabled in Prusaslicer. Grenade prints in several parts only the top part will need supports.…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
Prints without supports (or brim if you sink the model down far enough). You'll need to sink the model down in the slicer settings a bit.
A friend asked me to print it for him, we play with him from season 1. But the model that was in the public domain I did not like, spent a couple days and made a version that now I like. Printed it several times on Anycubic phonton mono…
Vase "Meek" in a minimalist and modern look as a unique eye-catcher in your table decoration. Striking due to its unusual shape, which is a real eye-catcher for every room. 🔹 DETAILS 🔹 - quick and easy print, with settings guide! -…
This model tests your printer's maximum gcode resolution. With your normal speeds and settings you can increase your Gcode resolution until either your MCU cannot keep up or your Baudrate is too low. How to do it: Decrease the values…
This Design is made in 1952 by Kay Bojesen. as i understand it, The drawings is free to share, but not for selling or give-away The design is protected under licence from Rosendahl Design Group A/S and is strictly for personal used and…
The 3D printing community is obsessed with printing the perfect Benchy, but wheres the artistry ? The Character?? This model has been pre-sliced with a 1.2mm line width and 0.6mm line height, and is brimming with imperfection, ensuring…
Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66942/
---------------------------------------------------------------------------------------------------------------- Update V2 The initial model included overlapping volumes which did slice correctly in an older Prusaslicer version but not in…
Below is a list of the tweaks which I made. These include small changes to the model itself and MMU painting in Prusaslicer. Clay: mirrored tile and tiles with relocated trees, bushes, shed etc. Ore: mirrored tile, winter version, and a…
Parametric Hieroglyphic Alphabet. With the openscad program "Hieroglyphics.scad" it is possible: to draw parametric hieroglyphic texts by use of the function "drawText()" to draw a hieroglyphic text inside a cartouche by use of the…
This will keep your Speed Editor dust free and protected when sitting on your desktop, or if you want to toss it in a bag for travel. The tall version is a one piece print that's the height of the jog wheel. The thin version is a two…
You need high resolutions
A high-resolution Porsche emblem provided in the 3 official colors. Resize accordingly in your slicer program. 3mf file also provided if you want to make adjustments. Please leave a like!
Do you have a foot fetish? Are you an enthusiast of anatomy? Do you enjoy unoptimized meshes? If any of those reasons resonate with you then this is the model for you. A model of the bones in your foot. All the models in this collection…
Its the Netflix logo in 3d. I added some Metallic Texture and some lights but still the original colors. The cover image is a rendered photen with a 8k resolution. You can change or delete some lights and change the materials for other…
Broly from Dragon Ball Z I just smoothed the original model You can donate/support here : https://www.paypal.me/ludiks https://www.patreon.com/Ludiks https://fr.tipeee.com/ludiks-vr Category: People
I increased the object resolution of the model so its less polygonal. Using open subdiv and crease sets to make it look nicer when it prints. I suggest in the slicer you cut the bottom so it has enough surface area on the plate. The…
Hi, It seems that I got lead screw that it not 100% perfect and I was experienced errors in prints related to Z wobble that Official TR8*4 Anti-Backlash Nut Block could not solve. After tightening official Anti-Backlash Nut Block issue…
Test model for scaning from the my review: https://3dtoday.ru/blogs/cebepl/sravnenie-3d-skanerov-creality-cr-scan-ferret-i-revopoint-mini Size: 100x100mm Min wall: 0.4mm PLA, layer size: 0.1mm
Reexported model with high density of mesh because i would like to have quality and added hole for long nozzles.
This one, designed by Props3DPro was found on thongiverse under: https://www.thingiverse.com/thing:4825875 I printed it with 0.6mm nozzle in 0.4mm layerheight and 60mm/s. It is printed in petg and fits nice as expected.
I changed the bridge thickness to 0.3 and 0.4 (separate models) and changed the numbers on the side from cool to hot plus added one for PETG ( it does not bridge well, but it helps find the heat range ). I also legthened the little bar…
Verschiedene Baureihen von Kugellager nach DIN 625 als Platzhalter. Various series of ball bearings to DIN 625 as placeholders. Wenn Sie andere Größen benötigen, zögern Sie nicht, diese in die Kommentaren zu schreiben If you need a…
The Soul Jam of A Resolute King. This Soul Jam Is Currently Owned By The King of The Dark Cacao Kingdom. Hope Ya'll Enjoy The Model And Sorry I'm So Lazy About Uploading These! -Eevee
This is a remix of LoboCNC's caliper design. Full credit to him for creating an excellent model. All i did was mirror the markings and orientation of the tool. This version has been optimized for use by left-handers. No need to adjust it…
I saw a YouTube video of Barnacules and he printed the original one at 250% size but it was very faceted at that size. I wanted to make one so I re modeled it using the original as a guide but made it with many more polygons so it could…
Some of the plastic washers on our boat were destroyed due to over-tightening. I created these as replacements. I can't attest to the longevity of them. Use at your own risk. The washers are a replacement for:…
The original model had many issues, most notably the resolution. The threads would also extend into the adapter's body, essentially making it hollow and less sturdy (refer to photos). I reworked it from scratch and fixed the issues. I…
An attempt at making telescope quality optical lenses with a SLA 3D printer! As can be seen in the photos, the resolution was just not good enough. Additionally, there is likely waviness throughout the thickness. Crystal Clear resin was…
I've made a much cleaner, higher resolution model of a chimp examining a human skull and pondering…What he ponders is for you to decide.
Verschiedene Baureihen von Kugellager nach DIN 625 als Platzhalter. Various series of ball bearings to DIN 625 as placeholders, spare part or for construct Wenn Sie andere Größen benötigen, zögern Sie nicht, diese in die Kommentaren zu…
Printed in PETG (PLA should also work); 0.2mm; 0,6mm nozzle Support is needed for the hooks on the rear of the holder.
People constantly ask if one 3D Scanner is better than another. Users can often look at two 3D scans and say which one has better detail. Unfortunately vendors don't typically show how they get their Accuracy and Resolution…
This is a remake of my other badge here http://www.thingiverse.com/thing:34807 This one is higher resolution and has a hole or round inset in the back for a 3/8" magnet. This allows it to be a fridge magnet or use another magnet under a…
This is the blender monkey but I upped the resolution. I haven't actually printed it yet so if anyone wants to share their settings it would be greatly appreciated. You will definitely need supports though.
Davinci Resolve Speed Editor stand. You have to print in two copies. The protrusion on the stand is used to block the slide, by fitting it into the hole with the screw. In my opinion, it improves the ergonomics of working on the speed…
Cover to protect you precious Speed Editor for DaVinci Resolve from Blackmagicdesign. It even has space for a USB Cabel, if you ever have to charge the Speed Editor on the go. To Secure the cover on the device I designed a slot in the…
Voici un clip pour pare soleil, pour un combi VW T2. convient pour cox, combi, carman etc…
No supports needed. When scaled up minimal supports may be needed under the pickle and brim on the top bun.
Based on Vojtěch_L's design, but in a higher resolution for smoother printing. Since, especially on the MK4 the decimation of the round shapes of this model is quite visible. Redesigned in FreeCAD, included the step and FCStd files
Masker met een hoge resolutie
Love pendant - Low resolution
The full sized, full resolution lithophane(framed and unframed) is available on my site for those that want it: https://www.gadunky.com/product/simonthesorcerer/ Check out more on my site: https://www.gadunky.com/ Print Settings Printer:…
How thin of a line can your printer lay down AND stack? .8mm down to .1mm, using a .4mm nozzle Arachne can render down to .15mm, but can your printer stack them? Proudly designed in FreeCad
A cute little bench representing everyone's favorite ocean driller!
You can use it as a placeholder, spare part or for construct If you need a different shape or sizes, do not hesitate to write them in the comments Done: Form A planned: Form C If needed, simply write the required form in the comments:…
A scan of the Nittany Lion Statue head captured for my capstone project while I was studying at Penn State. Printed a near scale model out of plastic for use around campus.
This is a frog outline I modeled for practice. Printed it on a Prusa Mk3 printer at 0.2mm layer height and it turned out pretty good. Leave comments on what you think and what you think I should try to model next. :)
Remix for a lightbar that is already soldered together.
this is what i can do the best im bad at modelling
I suggest adding small rubber strips underneath the two connectors for better friction
Portable, tripod-mounted, lightweight gimbal robot for high-resolution spherical panoramas. Rotates a camera 360° horizontally and 180° vertically to cover the entire surroundings, minus the small footprint of its circular tripod mount.…
A coaster where you can write your New Year's Resolution on it. Every time you pick up your coffee you'll be reminded of the goal you set for yourself! Feeling bad that you didn't meet your goal yet? Flip the coaster over and forget you…
PIKA P rint I n-place K inematic A ssembly This 3D printer makes things so small you literally need a microscope. Actually two microscopes because 3D. It is perfectly functional, but there has not been a lot of research in this area, so…
Focus, grounding stability, and anatomical grace captured in an extraordinary sculpt! Introducing the exquisite Warrior II Pose 3D figurine (Virabhadrasana II) . This sculpt showcases a female yogi in a powerful, grounded stance with…
I'm a DaVinci Resolve user! sign, Crossed out CapCut, because CapCut is Trash :D
Improved the resolution of 8x8 pixles by using the better Sensor MLX90640 with 32x24 pixels. Modified TC_front and TC_sensor-plate for use with both sensor types and added a fitting decoration for the new sensor. The firmware and…
This is my take on a filament encoder which achieves sub-mm sensing resolution, uses minimal parts and can attache to the outside of a printer using 2020 extrusions. I installed this on the rear of my Voron 2.4, but the mounting is…
Change color mid-way for a nice depth effect! Full file is available here:
Tiny Power Consumption Meter Max: 20V supply 0.1mA resolution Max: 400mA load (1A or 2A also possible with lower resolution) Measure frequency 70Hz Displays: mA and mW average mA and mW since start mAh and mWh since start Load V Measure…
This is a simple cover for travel for the Davinci Resolve Speed Editor keyboard. This design allows you to print it without splitting the model or using support thanks to the screw-on design of the jogwheel cover.
This tool is commonly used to analyze dents and surface damage on aircraft structures, but it can also be used for many other applications. The nominal resolution is 10 mm. Originally, the design was based on a 10 × 10 mm grid; however,…
Fixed OpenSCAD Multiboard backer generator bug. Resolved zero-height BOSL2 assertion error when offset is 0.
These are the 3MF files for printing the Low Resolution version of the OpenFlexure V7 Microscope. Uploaded to make easier to other people to have a ready to use project, with parts arranged 3 plates for making easier to print it in 3…
This is a remix of reddadsteve's Kermit the Frog model . I wanted to print a version of Kermit as large as possible on my XL. This means inflating its size to about 250%. However, when I scale up the original parts to 250%, I can clearly…
There are two parts to this: The Optic Probe Holder which attaches to the RepRapMicron Z Axis Arm, and an adaptor that holds a 3W UV LED module to a standard simplex 9/125 fibre optic cable. A duplex lead may be halved with a hacksaw. The…
This is sole replacement template for the Butora Gomi size EU 42. It was modelled by taking a photo of the sole then tracing it in fusion, so its not perfect, but a close enough approximation for cutting out of vibram, then sanding to…
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
Change color mid-way for a nice depth effect! Full file is available here:
PIKA P rint I n-place K inematic A ssembly This 3D printer makes things so small you literally need a microscope. Actually two microscopes because 3D. It is perfectly functional, but there has not been a lot of research in this area, so…
A scan of the Nittany Lion Statue head captured for my capstone project while I was studying at Penn State. Printed a near scale model out of plastic for use around campus.
---------------------------------------------------------------------------------------------------------------- Update Optional Storage Box I uploaded all files needed to store all parts for 4 players within the original game box.…
If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
If you're one of the crazy ones who doesn't use the trackballs and they get in the way, why not replace them with these? (I've moved my whole operation over to DCTLs) These rings still allow to control the Y channel by interfacing with…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
Originally posted on Patreon, now moved here to Printables! :) Resolute Box Reworked If there's one thing I've spent a lot of time on in the year since I published the Resolute Box, it's printability. These days, I have a bunch of cheap…
fantasy type horns collection, licence for selling the final product included! higher resolution for smoother final products. If you have any questions, donť hesitate to ask. please do not resell the models itself, licence for selling the…
