1,682 models
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…
The Zero Point Sprite from Fortnite. This is my first actual handmade model sculpted and everything so hopefully you guys like it and yeah thank you for the support. Portions of the materials used are trademarks and/or copyrighted works…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Creality Sprite Extruder Model
This cute water sprite is small and hand held. I tried to make an air sprite but I just can't get it correct but I feel like if you print this in white it would work. The eyes can be painted or done with an MMU I personally used paint. If…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
Bracket for the free screw hole on the right Side. Only mounted with one screw. For the G-Sensor of the Sonicpad
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
In a galaxy not so far away, the classic Benchy got a serious upgrade. The Benchy Star Destroyer combines the familiar curves of everyone’s favorite 3D printer test boat with the angular might of a Star Destroyer. It’s the perfect blend…
Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Spiral vase: On Supports: None Post Process Not necessary
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
This took a while, but I believe it's done now, A complete Spine Chain Kit for Ender 3 V2, with a sprite pro upgrade. There are multiple variants for the link's, and mounts, depending on how much movement you want. Be reminded that if you…
Update : 28-04-'24: Tighter version of the blade holder added. Remix of the Scraperite handle by Genghis. I like Genghis' design, nicely done with the curved shape and knurling; but the part for holding the blade didn't work very well for…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Check out also my Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder To silence the fan even more, print my Snap-On 5015 Blower Silencer Design: I have created this model with the following considerations:…
Seen that people complained about thin wall on original design so I have added strenghtening wall increasing layers to 3 instead of 1 that could be faulty. Printed this with 0.4 nozzle and 100% infill
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
I made a water sprite and I wanted him to have a buddy.
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) No supports needed Scale it as you like :)
(Keycaps for Cherry MX) If printing in the orientation that the file is originally in, supports may be necessary. Printing upside down should be the best way to print it. Dimensions of the entire file are 17.8x6.6cm which should fit on…
This design is an adapter for the ADXL345 Accelerometer to be mounted on the Creality Sprite Extruder of the Ender 3 S1. There are two versions of the adapter: The first version requires 4 M3 inserts, 2 for mounting the ADXL and 2 for…
An optimised part cooling duct for a Creality S1/Pro/Plus using the Creality Sprite extruder to maximise airflow and reduce back pressure on the 5015 fan. It is a remix of the hero me gen 7 single 5015 fan duct to make it fit for a…
Creality Ender 3 S1 Creality Ender 3 S1 Pro High Flow Modular 5015 cooling duct sprite extruder This a more refined version of the Ender 3 S1 Twin Jet 5015 Fan Duct that is a little easier to print (less supports). It also doesn't require…
This cable drag chain is a remix of various models listed in the “original models” section to fit the Sprite Pro's fat ribbon cable and heated bed cables on an Ender 3 V2. Here are the number of models that I've printed and used to manage…
Attention, this is just a joke, not for real use! Is a sudden revolution breaking out in your country? Or do hordes of zombies surround your house? Don't have any weapons, just a 3d printer? Don’t worry, you’ll be done in a two hours and…
The model supports the connection and rotation of the cable for the Creality Sprite Extruder Pro for use on an Ender 3 with a linear rail. Supports are required. If you would like to buy me a cup of coffee .
I wanted a way to keep the ribbon cable on the Sprite Pro extruder raised off the bed and pointing to toward the back of the printer so I slapped this together. Get your Prusameters… Post your Makes! If you like this project, please don't…
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
This mount goes onto the Sprite extruder, and makes the CR touch inline of the nozzle. I.e it makes the y offset of the probe 0. New offset is- (-55.5 , 0) You will have to update the firmware with the new offset values. Also, this model…
The ribbon twister should be printed with the cable entry side on the bed without supports. Cable clips will possibly need a raft.
The legendary boss sprite. I printed it in red and then painted the black and white sections. It can be printered multicolour but would take about 2 days if you print the same size as I did.
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
A new take on the ribbon cable strain relief for the Creality Sprite Extruder. ~6 grams in PETG. See it in action here: My print settings: PETG (print in the hotter range of your material for good layer adhesion, the overhangs are mild on…
No Face from the movie Spirited Away Default scale: 1:18 I recommend printing in PLA in 0.12mm layers. Also, the mask and mask parts should be printed very slowly. You can paint the mask parts as I show in the photo. I recommend flat…
Youtooz released a model of the Purple Guy Sprite from FNAF a while ago, and I kinda wanted to try to recreate it. So I recreated it, and it looks pretty good. The eyes are off, but I think its ok. Please don't sell this, as it basically…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer bottom surface: Print on a textured plate. For a nicer top surface: Change the Lift Z to 0.1 Top…
A remix of the Ferux95 no face mask. whice allows for it to be printed larger.
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
A cute companion for your desk, hope you enjoy it, and thank you for stopping by TAICED's Profile! For more designs like this, visit our shop! Print instructions Category: Toy & Game Accessories Perfect for printing without supports!!
This is a replacement for the stock Sprite cable management that removes the stress and potential cable fatigue from the x-axis movement. Like the originals, it bends the cable to the left and routes it across and down the outside of the…
CREALITY SPRITE SONIC PAD ENDER 3 S1 S1 PRO X AND Y AXIS ADXL345 G-Sensor Mount remix X axis mount more rigid and mounted permanently, sensor screw holes enlarge to fit m3 screw. To mount on sprite extruder. may need slightly longer m3…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/259877-ender-s1-sprite-extruder-cr-touch-mount. Redesigned it for my Ender 3 V2 with sprite extruder. Reasons for remix An even slimmer verision of…
I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…
one day i searched for a haku dragon form model to print and i was surprised by the lack of choice. So i decided to make my own model. ps: it's my first avanced model for printing! please if this is impossible to print tell me. Enjoy.…
If you want to download and play the mod to know from where this character is, just click here , it should redirect you to the official FNF mod
This is accurate enough for you to make mods for the sprite Mounting wheel spacing may be incorrect This file has was made starting with an extruder model ripped from one of the Ender 3 CAD files. The mounting wheels are from the same.
I made a new fixture for the extruder and ABL sensor that fits the Ender 3 S1 Pro. The original 4010-part cooling fan is used to cool the cold end now. You have to adjust the ABL sensor offset before using this mod. X-axis offset: -47.7mm…
I was in need of adding a sprite extruder to my Ender 5 Plus. After looking at what everyone else did, I realized I can just simply add a back plate to hold the GT belts and remove the triangle piece that was coming from the left side of…
Add a touch of magic to your collection with this adorable Cute Forest Spirit . Featuring a rounded body, oversized glossy eyes, tiny arms, and charming fantasy details, this character is designed to bring warmth and personality to any…
This allows you to cool the part using 5015 fans.
Does not require support material Print with back face (power cord plugin area) on the print bed
I believe in having little tools out of drawers, just my favorite few ones that I use almost daily. This holder will fit just three pens/markers/small tools. To organize and minimize the "paradox of choice". Fits SKADIS system and…
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
This project features a collection of small 3D-printed plates, each designed with various cutouts and practical templates: Geometric shapes (circle, square, hexagon, polygons, arrows…) Guides for drilling and drawing Stylized world map…
Compatible with the Mk4 Fillment Guide! Also, Stronger, Smother, Faster! (sort of) A more sturdy filament clip that keeps the critical dimensions of the original while taking inspiration from @alexan_e's remix to nearly eliminate friction…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
Bring this adorable block-style creature to life with your own color scheme! This 3D model features an oversized head, big expressive eyes, small horns/spikes, teeth, and a fun cartoon-inspired design that makes it a great display piece…
Add a touch of magic to your collection with this adorable Cute Forest Spirit . Featuring a rounded body, oversized glossy eyes, tiny arms, and charming fantasy details, this character is designed to bring warmth and personality to any…
NEW VERSION 3.1 with recessed hex nuts and more clearance for CR-Touch (STL and OBJ formats). 5015 fan upgrade mount for Ender Sprite Extruder Pro using stock screws. There are a few similar designs to this, but I took a little bit of the…
sprite extraction crate
After receiving a Creality Sprite Pro extruder to upgrade an Ender 3 Pro printer, I found that my touch sensor was hanging just below the hot end nozzle. I found several models via Printables and Thingiverse but could not find one I…
I wanted to move my probe to the right side of my hotend to make room for the noctua fan mount I'm designing for the left side. I also wanted it to sit in line with the Y-Axis of the printer nozzle. Offsets for the prove are X: 39 and Y:…
I designed this originally to work with the Modder Board. I have added the bracket for stock board users. Please let me know of any clearance issues. NOTE - You will need to download a model to push out the X endstop. I will work on a…
I've seen some comments about the issues of the provided supports and I was requested to post up my file that I've had success with. This orientation and support placement has always ended successfully on my Mars Pro with the smallest…
Update: v2 Offset mod for Touch Sensor added. (Last photo) Offset Values added. Setup: You can find pdf document in the attachments for this. Printing: You have to use PETG or a heat resisdant filament to work properly. You can choose any…
Can we make the best just a little better? Yes - we make it a bit simpler, easier to use and add some grip! My favorite filament clip until today was the “Grandma's favorite filament clip” by Extrutim . There was a thing I did not like:…
Rear lip for your car to get that extra downforce everyone needs. To print you'll have to cut it in your slicer to fit your 3d printer or you can you pre-cut file I used I printed mine in 6 parts oriented vertically and glued it together…
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
A simple 2in1 mount for an ADXL345 on the Creality Ender 3 S1 / Plus / Pro or all Sprite extruders / Pro.
0.12 mm layer PLA WORKS FINE no supports no infill
Soot Sprites (in the style of the Barrel of Monkeys game) Characters seen in Studio Ghibli's Spirited Away as well as My Neighbor Totoro Double-sided (eyes on both sides) These can be played with like Barrel of Monkeys, or used as…
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
Was really happy with tsuga's backplate for the Creality Sprite Extruder, that fixed all my bed leveling issues... But, I wanted a more silent hotend fan than the standard one. Went with the following fan: WINSINN 5015 Fan 24V no supports…
~ UPDATE: 03/01/2024 ~ The amazon links provided below are my affiliate links, if you use those links to buy your hardware you will also be directly contributing to me as well. Please consider using those links if you need to buy the…
Remixed of two -I used a stencil font to punch the type of filament into the tag. It will print at 0.2mm ok, but at 0.16mm you'll get better quality and surprisingly for me, it was about 1% faster ;) Print is solid - it's small and fast…
Pyrite Octopus He is a very, very distant relative of the pirithog. He lives in the darkness of deep sea caves and rocks. I added three versions. "Long hair", "Punk hair" and "Short hair" My family, prefer the "long hair" version. (in the…
