32,499 models
Dimensions (LxWxH) 186,9 x 66,7 x 33,8 mm (100% scale) Basic information The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. The model was designed to…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
No supports required. Just slice and print!! 4 Versions available: Shark_v4_A.stl: Original design, movable jaw Shark_v4_B.stl: Friendly face, movable jaw Shark_v4_C.stl: Original design, NON-movable jaw Shark_v4_D.stl: Friendly face,…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
support needed coz of claws. i printed mine on 0.15 but on 0.2 will look great also. Orginal Link: https://www.thingiverse.com/thing:5222826
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Small cat bookmark. Made for filament change for two color print.
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Print approx. €18.78–€22.95 excl. taxPreliminary estimate for one variant
Easy to use Easy to print
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
This bookmark prints in less than 15 Minutes with only little more than 1 m filament. It's a quick and easy print for a beautiful gift. Update 15.12.2022: If you like puzzles games, you might have a look at my horsehead sliding puzzle . I…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
My son turned 16 and loves Mcgybeer's "Articulated Shark." So I made him a keychain version of the model. I scaled the design and added a loop to attach your keys to. I also attached the tail to the last body segment and made it so that…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Have you ever wanted to obtain the highest level of achievement known to man also known as being “Forklift Certified”? Well this RC forklift is meant to help make that dream a reality. This Mini-Fork is front wheel driven with rear wheel…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
An articulated shark with moveable body sections, jaw and pectoral fins. It has a hidden slot (as shown in the picture) for adding a keychain. Original size: ~4.9 cm × ~9.6 cm × ~3.1 cm Upper teeth require support materials (see…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Easy to use - Version 2.0 Better readable
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates and more detailed instructions. Go to my site for an overview of my other models . Only a few of them are published on…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
[Update] ---2025/10/07--- Reduced the memory size of the body model. ------------------------------------------------------------------- This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
The new center marker, now with ruler incl. and a more robust design !!!
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
I designed this really simple bookmark to put in-between your book, magazine or something else. I made a few different versions but you can easily make your own version by download the “Bookmark Base” file and adding something on top…
Simple, thin, feather-shaped bookmark. Printed in translucent PETG with color change for contrast.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
držák baterie Parkside na zeď
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
Print approx. €40.45–€49.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a golf ball marker, for marking 3 straight lines on a golf ball. It was designed as slightly more than half of a sphere so it sort of clips onto the ball. I made this hoping that you would use a standard Sharpie on the middle line…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Compact Circle Marker A rotating axis with a cutout to guide a pen for precise circle drawing. Perfect for DIY and 3D printing! The measurements are in centimeters, with a hole every 0.5 cm to offer more circle size options.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
A simple and quick print to decorate any surface in glow in the dark stars! Use the provided G Code for an under two hour print that gives you 21 stars of different sizes and two moons. Or use the 4 different size star stls to make as…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
2022-12-21: I've added a new single blade version which doesn’t require magnets or glue to assemble. 2022-12-21: I've added a new version which only has the page holder and no blades. 2022-12-20: Magnetic bookmark with two blades…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Perfect for drawing lines at the right distance
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Skyrim quest marker. You can stick it with a double-sided tape to a door, a wall, your forehead, you name it. There are two sets of models provided. Single part model and separate models for each detail of the icon as well as the base…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I was surprised to find that this model does not come with the wall mount, same issue with the more…
Print approx. €12.52–€15.31 excl. taxPreliminary estimate for one variant
Easy print for marking the stitches while knitting. The one who requested it finds it very useful :-) printed in PLA If you are interested in knitting, please have a look at my needle gauge 3D model. have fun see also blog post: Knitting…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
I designed a replacement peg for my BLACK and DECKER Workmate portable workbench. The original part works just fine, however, I needed a few more as several have gone missing over the years. I tried to remain true to the original design…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
There are three different versions of the golf tee. The only difference between them is the length. I have a short one that measures 1.75" - I use these for teeing off with irons. They are just long enough to keep the ball sitting atop…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
These page markers can be used to hold the page to favorite recipes, important pages that you want to refer back to in a book, favorite quotes, and to hold the page for important study material. They are a great way to help annotate a…
Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET
Update 2025-03-04: Version 2 der Box S2 hinzugefügt mit Deckel und Trennwand. Außerdem Skadis- und Wandbefestigung für Größe S2 hinzugefügt. Text überarbeitet. Version 2 of the S2 box added with lid and divider. Also added Skadis and wall…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Inspired by a print Sharkz: https://www.thingiverse.com/thing:910216 But I completely redesigned it from scratch (so I don't really think of it as a remix). I wanted it to be a Chip Clip (Crisp Clip in British). Here is what I added: Be…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Twilight Sparkle from TV serial My Little Pony model has extra support for tail Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
Print approx. €7.50–€9.16 excl. taxPreliminary estimate for one variant
UPDATE: I made a v3 which is a variation of the short version, that is more practical as a bookmark. --- Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse (thing:630577) There was similar bookmark on…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Hello, I have South Park for you - Kenny, Stan, Kyle and Eric . The characters are authentic, inspired by the South Park series. Suitable for coloring. My kids love these characters :-). Happy printing! I used PLA/PETG as the material.…
Print approx. €13.00–€15.89 excl. taxPreliminary estimate for one variant
Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…
Print approx. €17.04–€20.83 excl. taxPreliminary estimate for one variant
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
0.2 mm Quality 15% Infill Generic PLA Settings You can set a second color in 2.20mm (11 layer) Printed in a Prusa MK3S+
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Bring Kenny McCormick from South Park to life with your 3D printer! Besides the one-piece model, I've attached STLs of Kenny cut into two pieces, which can be printed without supports. If you print Kenny in one piece some supports are…
Print approx. €6.20–€7.57 excl. taxPreliminary estimate for one variant
A Collection of map markers from the Elder Scrolls Skyrim Includes : Falkreath, Giants Camp, Markarth, Out Door Quest Marker, Quest Marker, Riften, Shack, Solitude, Whiterun, and Windhelm All are 3mf Files with the color change already…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This paintball marker stand was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, screw the ASA adapter snugly into the marker, try to make one of the fins on the ASA…
Whether in the workshop or the pottery studio, with one measurement you can get the inner and outer diameter of any piece! Perfect for making two pieces match so they fit together, whether that be pottery lids on teapots, wooden jars, or…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) Unleash the power of darkness with this highly detailed Dark Angel Knight 3D model! This stunning sculpture features an armored female warrior with grand, outstretched wings, standing in an…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
The Shark Vacuum I have (Shark IZ362H) has a nice feature where the main unit can hang from one of the extensions. I thought it would be great to be able to mount the vacuum from the wall, so I designed this to suit! The wings on either…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
All tokens for all Kill Teams that have them, as well as tokens needed for the base game. Some tokens were more difficult to find designs for (i.e. Grisly Mark, Pain, Clearance Sweep, etc.), but I did my best, and hopefully the symbols I…
This is a damage and horror counter for the Arkham Horror card game if you do not like to stack multiple tokens. The design is similar to the health counter from the Marvel Champions card game. Use a layer thickness of 0.2 mm. Print the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I tweaked McGybeer's the design and added a loops to make the baby shark into hoody beads. I also attached the tail to the last body segment and made it so that it prints vertically as at the half scale I could't get the tail's ball joint…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
200x80x1mm - 2 colors - start to print with light color , than change filament to some dark color
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A whale shark model in low-poly style. Default orientation set the mouth part downwards. The model could be unstable during printing since it has a small bed side. Support materials or brims would prevent it from collapsing. GCODE set up…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…
Print approx. €5.47–€6.69 excl. taxPreliminary estimate for one variant
Updated design: Parametric Modular Honeycomb Organizer I gave my brother 216 alcohol markers for Christmas, and, while I really like Geeky Faye's design, it was going to take too long to print 9 sections at ~1 day apiece, so I made a few…
Print approx. €34.09–€41.67 excl. taxPreliminary estimate for one variant
A bookmark I designed to match the book I'm currently reading - "Every tool's a hammer" by Adam Savage. I printed this with Mango Yellow Prusament PETG, which really matches the color of the book sleeve nicely :) If you print this with…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Printed with Artillery Sidewinder X2 Nozzle = 0.4mm Layer height = 0.12mm Infill = 15% Scaling factor = 150%
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
Marker for Area of Effects for Playing Dungeons and Dragons (or other Tabletop RPGs) on a Standard Square Grid (with a width of 1 in / 25,4 mm) This Model includes more Areas (different shapes of Areas) in one Objects, so you don't have…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
Marking Guide for Folding Ruler The marking guide for the folding ruler is an indispensable tool for precise marking and outlining measurements on various materials. This handy and robust marking guide is designed to enhance accuracy and…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
The Flinty Benchmark is 37.8mm tall, contains bridge infill, unique overhangs, bed adhesion & more . Yabba dabba do it! Added a rotated version to check cooling on the other axis. Easy to print, hard to print perfectly. If Benchy is level…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
Print approx. €13.87–€16.96 excl. taxPreliminary estimate for one variant
This exists because my SO asked me to print a bookmark for her. The drawing I received from her looked like this. I'm especially grateful for the precise measurements she provided. I'm sorry.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This paintball marker wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, mount the wall mount to the wall using drywall anchors (use the screw holes in the…
Tiger bookmark for those thrilling war books of yours! (works with other books too...) New updated slimmer version V3! Print instructions Print Instructions Print with 0.15mm layer height. PLA or PETG , what ever flexes enough in your…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Watch it fly here: Pls sub
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…
Print approx. €10.73–€13.12 excl. taxPreliminary estimate for one variant
Updated 11/1/2022 to add square version of card. The original dimensions are 148mm x 78mm x 1.44mm. At 0.30mm layer height, it will take 37m to print. The square dimensions are 188.7mm x 188.7mm x 2.5mm. At 0.30mm layer height, it will…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A parking disk that you can use to indicate your parking time. Often used in Europe. Printed in 3 parts (some with color changes) and snapped together. The top cover is available with text in four languages (English, German, French,…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Simple remix of this pen holder. I needed something that would fit larger items, specifically Copic markers. It fits both the square and oval shaped markers. I went through a couple iterations and landed on this one, I updated the edges…
Print approx. €6.95–€8.50 excl. taxPreliminary estimate for one variant
This is a add on for a basic Work Sharp sharpening system, with this add on you can use any sharpening stone from 3 1/8 inches long all the way up to 6 inch long stones. When printing these components it's important to print the Lead…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Stan from South Park. No fixes needed.
Print approx. €16.74–€20.47 excl. taxPreliminary estimate for one variant
A simple stand for markers of all kind
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
Made in two variants. It is good to be printed from PETG! You will need 4 pcs 4x40mm self-tapping screws to mount the charger and 2 pcs screws for the whole mount.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
Old collection of models I made for a stylized smithy workshop: https://sketchfab.com/3d-models/smithy-game-graphics-2015-54ce631950c1403bb33d2d81047a3a78 I've upressed these models and added minor texture detail to the surfaces through…
Print approx. €6.68–€8.16 excl. taxPreliminary estimate for one variant
Thanks to BespokePrints for the bookmark's bottom original design. Thanks to TheCase too for his drink coaster set which I mixed into this bookmark !
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
