Counting matching models…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…
'Making of' video: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The…
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
This is Xbox controller stand made from PLA. NO SUPPORTS ARE NEEDED!!!
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…
Imprints clay with a dainty floral texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Support for remote play with your phone directly on the controller. Fits phones from 71mm to 105mm in width. The tightening screws use an M7*1.0 thread I suggest you glue some rubber (in my case pieces of the rubber band) so that the…
Imprints clay with a lovely heart texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Simple and clean looking Starfield Xbox Controller Stand . Looks great in combination with the new Starfield edition Xbox Controller. fits 8x3mm anti slip rubber pads Printsettings: No raft Support Structures for best results where the…
Hello, these are a few clay rollers ex , and a Tile roller I got inspired by a few pictures, ps : the pictures are not mine , I can make more types if any one is intrested ! Thank you
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Lampička s obličejem Chase z Tlapkové patroly slouží jako lampička do dětského pokoje. Je ovládaná skrze kapacitní tlačítko, které řídí zvyšující (step-up) měnič pro LED pásek. V lampičce je umístěn i USB-C Li-Pol nabíječka baterií pro…
HackMan3D Control Deck — Build Your Own Programmable Macro Controller I am proud to introduce the HackMan3D Control Deck, or HCD: a fully customizable macro controller designed for 3D printing and compatible with both Windows and macOS.…
Imprints clay with a dainty leaf texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the roller…
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Imprints clay with a chunky weave texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Imprints clay with a geometrical checkerboard texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to…
From 20 years of experience as a Sushi Chef, this is my personal, professional Makisu. Thinner and lighter than a bamboo maki mat for less fatigue 20cm width fits Nori Seaweed sheets perfectly. To be able to precisely form the edges of…
Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…
This is a remake of @MakersMakingChange assistive pencil grip. I added 3 flat surfaces at 120 deg to keep it from rolling away. For standard 7.8 mm pencils. This is great for smaller hands. For adults I'd suggest to use the “TALL”…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation 4, PS4 controller stand for you. The controller fits beautifully into it and is an ornament to any collection of games and video games. The material I…
It would be nice if you post your make. Thank you
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Design stolen from Deviator2x. Simple, functional, and small. Thanks! The V4 design is a parameterized Fusion 360 model that supports various tube widths. .stl and .gcode files are posted for 60mm wide toothpaste tubes and 120mm wide sour…
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
After a long time I decided to come up with some fun model . I like print-in-place models , this one is just that. The model has four rotating parts, you can connect the patterns in a line If there is interest, I can make a roller with a…
Look at the pictures to see how to assemble it. Updated 2024-01-23: Made the rim/spring stronger. OK now, but still holds not perfect together. Consider to glue it ;) Chamfer instead of a fillet (suggested from @LibertyBeta_67371 )…
Inspired by rolltop bags, this seal keeps coffee beans (or any other item in a bag) well protected from the environment. The excess bag is rolled up and the flaps prevent the bag from unraveling on its own. The opening slit is 18 cm long…
Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…
-100% infill -PLA just super glue the two parts together (Have not done TPU yet)
Handle on my parents' refridgerator broke off and I found a great replacement for 3d printing by @HolesAreRound, but the handle itself was too long for the specific model my parents have - I had to shorten it so that the inner distance…
For rolls with OD of ~ 120 mm and height of 100 mm.
Bose A20 Control and battery holder
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Create an inclusive gaming experience with the Rumble Plate Dice Roller. This switch activated dice roller utilizes a hobby motor, battery holder, Omron switch, and 3.5mm jack along with a couple of 3d printed parts and a clear plastic…
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Mountable vinyl roll holder that was designed for our Cricut Maker 3 vinyl rolls
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
Designed to hold a Hikma brand Albuterol Sulfate inhaler. Prints as one piece, use full organic supports and 30% infill. Print on it's side as seen in photos. 5 hours with input shaping on Mk4. Use at your own discretion.
8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.
This is a very simple trim that will hide the screw holes when converting from an old Truma CP to the new Truma Inet X panel. This trim is 1.25mm thick, 124mm outer width (inner hole width 108mm.) Outer height 97mm (inner hole height…
Wall Art silhouette model of the Rolls-Royce Spectre.Adjustable size. I accept model suggestions or ideas you might have
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…
I made this remote control holder attached to the frame of light switch (for the always misplaced blind's remote control) and because I didn't want to drill or glue to the wall with the previous original remote control holder. It works…
I decided to make this because i was sick of not finding the remote controls i have made this with 3 perimeters and 15% infill and in PLA i found that printing it on its side and with organic supports worked fine for me this actually…
this is a 20 yard dumpster i created to mimic dumpsters i own. will have updated model with swinging gate for realistic
Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…
Planned for outdoor Waste container bag. 80mm diameter x 150mm height with M4 clearance hole. Print it from PETG or ABS/ASA if you want to use it outside!
I tried a few trash bag holder / dispenser designs and they were pretty good. Ultimately I made this, combining the features I needed and avoiding the snags. Handle a variety of brands, roll sizes - especially larger ones (we usually use…
Rollenhalter_Verstellbar_Gewinde und Rollenhalter_Verstellbar werden 2 mal benötigt. Außerdem sind 4 Kugellager 8x 22 x7 erforderlich. Die Teile werden von 4 Schrauben m4 x 14 zusammengehalten.
Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…
HomeKit controllable LED light #1. Really simple to print and to setup. =) This lamp can be directly added to Apple HomeKit and controlled then via Siri and the Apple HomeKit app too. You do not need an additional bridge so it will be…
Inside of older MB cars knob. Sometime need small adjustment by knife :-) PETG - 15mm
(pour le français, voir plus bas) Wall support for 2 dometic remote controllers. Max remote controllers size is 56x18mm. Use two 4mm screws to fix the support. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no…
A $1 dollar trolley key that can unlock Australian trolleys.
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Originally made by Lundiplutzmus. Modificated to mount flat against the wall. Put the 2 halves together install with 1 screw against the wall. Easy to print. I'm printing all my parts in PETG (the added gcode is for PETG), but use your…
This version broke on my and I have remade it in Fusion 360. Please use this model insted!!! I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of…
Com esse suporte você pode fixar os controles na parede ou em móveis. Fácil de imprimir e usar. Use Super Glue (Super Bonder, Araldite ou outra de sua preferência).
Tired of not having paper towel easily accessible when cleaning up after your baby? Me too, so I made this. Super easy to print, no supports needed. I used a 40% tri-hexagon infill and 3 walls and it's plenty strong enough. The version in…
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)
Der Halter kann mit Schrauben an der Wand befestigt werden und man kann Dinge, wie eine Küchenrolle, Klebeband, Absperrband und weiteres dranhängen.
I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of printing I got this. Amazon.com: HDX 128974 36 in. W x 72 in. H x 24 in. D 5-Shelf Plastic…
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
The tolerances are a bit tight so you might need to sand it down a bit.
Just like the original, but with a slit compatible with M3 size screws! This was made to allow compatibility with the Honeycomb Storage Wall, but it should work practically everywhere. Modifications were made with the negative volume tool…
Kresleno v PTC
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
Print in white filament and then use black marker to colour in the bits. Check scale before slicing. Have Fun!
Entry for Hercules DJControl contest. Inspired by the legendary Czech game Bulánci. The character of the techno DJ Tub Thumper in the Disco level.
The temperature control dial cover broke on my moms 2013 Honda CRV, so this was made to cover up the bright light underneath.
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach planet tripod.
Vytvořeno na opravu ulomeného zámku 4pin konektoru Fabia 1 (6Y5) palivového čerpadla. Mělo by být kompatibilní s dalšími starými modely koncernu VAG (VW/Audi/Seat/Škoda)
Two versions are provided: Simple hook Hook with safety end to prevent cables from accidental falling Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15min Slicer settings: 0.25mm layer height, 4…
Hodinky Rolex (hodinová hlava) - Rolex watch (watch head)
To complete, you will need a two tubes (preferably aluminum) with an outer diameter of 10 mm. Rolling axis tube should be 128 mm long. Chamfer the edges of the tubes for easier installation. Glue may be needed for attachment of tubes. The…
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
