821 models
This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
This is not meant as a permanent replacement for the original part, I´m sure Garmin has made the original part to certain standards. But it´s nice to have as a temporary fix until a new one arrives from Garmin. I always have a few laying…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
UPDATED - now another fly head shape with a rounder head and larger eye holes. Base head part for building your own trolling flys, sometimes called umbrella flys. Picture should make it clear. I also added a simple printable/resizable…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Simple tray to hold tobacco and my roller .I had to scale to 95 to fit my ender 3 I made it right at 220 x 220 so it would not fit at 100 scale. Print instructions Category: Office Summary Simple tray to hold tobacco and my roller .I had…
Print approx. €5.74–€7.01 excl. taxPreliminary estimate for one variant
This is Rolli the Hausgeist or enclosure ghost actually. Print instructions Rolli the ghost rolling its eyes over extruder loading actions: There are two files: One for the white parts including the face, teeth and irises for Rolli. One…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This is the speed control knob for an older electric Minn-Kota Trolling motor.
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Print in place. No supports. Use gentle force to brake eyes rotatable after print. A thickness of 2.5mm seems sufficient to hold the rotating eyes inside the socket. But strong children will squeeze them out bare-knuckle :) → .( Increase…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Rolling knife sharpener box including room for two spare stones. Print out of PLA, precision is good enough to ensure snug fit of the top cover. Infill: 15% 3d cubic (you can block infill in the middle of slab on PLA to save a bit of time…
Print approx. €3.42–€4.19 excl. taxPreliminary estimate for one variant
A nightstand button console for controlling lights and other devices without leaving bed. It's controlled using your garden-variety Wemos D1 Mini (clone) flashed with Tasmota for ease of configuration (I'm using these GPIO: 4, 5, 12, 13,…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET
An organizer for the different thickness disks of the Joseph and Joseph rolling pin (Joseph Joseph JJ20085)
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Adding the missing piece to this useful mobility kit. At your destination not only will you have a seat, but also a place for your cup, mug, or can, or bottle. This design will likely evolve with feedback and use. (image above from front…
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for PETGSource material: PET
Im Rahmen des „ PrintClosure-Projekts “ habe ich diesen regelbaren Radiallüfter in das Gehäuse eingebaut. Zur Montage der Steuerung dient dieses Modell. Es kann direkt mit den im Gehäuse vorhandenen Bohrungen befestigt werden. Das…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for PETGSource material: PET
https://pihrt.com/elektronika/486-ovladani-privodu-vz
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
You like your filament dry ☂. And yes, there are some silica gel boxes out there already. But most of them are a bit too generic are lacking features like a hollow core … … or a bearing mount option to work as a filament roller. 😍 And…
I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
Remove MINI version until I print it and tune. ------------------------------------------------------------ UPDATE 8/5 Reworked pins for better strength. Updated files - Pin x3, Drawer (all versions) and Rolling Top.…
Highly customizable rolling storage bin system. https://youtu.be/Cm5bByFYJKk https://youtu.be/ak8NoDQWSmo https://youtu.be/tUDJG0Tqd8U Customization Pick a size (small, medium, or large) and 8 bins that match your storage needs (you must…
I've gotten into DMing D&D lately, and I've been inspired to make a print-in-place dicebox/dice tray/device stand. This will print in place on a standard prusa mk3. I've also included separates in case you wanted to do some different…
Tired of messy egg storage and cracked shells? This rolling egg rack keeps your eggs neat, safe, and easy to grab! Just load the eggs from the top — they automatically roll to the front, so you always use the oldest ones first. Need more…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- The Neko Baking Set is a cat-themed collection…
Rolling Paper Bench Stand ***Update - Two new versions have been added! There are now three bench designs, the Rocking Bench, the Arm-Rest Bench, and the OG Paper Bench. Try them out and let me know what you think!*** These 3D-printed…
Upgrade your IKEA Kallax with this precision-engineered Roller Shutter (Tambour Door) . This 3D-printed insert fits perfectly into a single Kallax cube, offering a sleek way to hide your items with a smooth, satisfying sliding motion.…
A simple rolling toy for your cat, kitten or child :) You can choose between mouse or fish model (superstructure) and attach a universal print-in-place chassis to it. Just clip the chassis into the animal - it will stay there without…
This strange rolling riddle will make you think twice about how things roll! In a straight line? No! It rolls in an irregular pattern like pictured below. It gives you the illusion of rolling normally, then it fakes you out! It works best…
This is a good print in place canagar. Put the stick in the little notch on the bottom of the body, add the funnel on the top to load your favorite thing to smoke. Then use the plunger to pack it down. Once filled pick the packed tobacco…
I build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there. I add a small center part of if too, so…
Ideal for dads, teens, and anyone who says “I’ll just be a minute.”
Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…
This small tray is easily printable in just about any material, although I recommend printing in PC-ABS, PC, ASA, ABS, PLA for a shiny, durable tray that is easy to clean. PC-ABS by Polymaker is my personal favorite for such things. If…
Don't let the number of files intimidate you, you'll only needs a fraction of them - continue reading and you'll see why there's that many ;) A riser with rolling shutters. It'll provide the best possible airflow while remaining as…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl changelog: (19.07.2025) - added (XS_S_M_L)_CLIP_v1.1 with more tolerance You…
So after almost a year I finally made a smaller version of my rolling top box: https://www.printables.com/model/65966-rolling-top-storage-box This is not a rescale but a complete remake due to complexity of moving parts. It has small…
These six rollers complement and extend the Pottery Rolling Stamps in my earlier upload to Printables. They add texture and patterns to clay projects and other art endeavors. You can roll them by hand or print and use the handle in my…
Due to the constraints of using widely available M3 hardware the roller produces large rolls. roughly 9mm OD. The center hole was left open on both sides so that the user can decide what side to have the turning wheel. Compatible with…
Since we didn't have a sushi rolling mat in-house and there were none in the stores, decided to design one myself. The main idea is using flexible 3d-printed cloth and make it rigid in one direction. Thanks to whatsacc for the easy and…
Also see my Diamond Stone version of this rolling sharpener. Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to…
modified the machine for 70mm cigarettes, also made a flexible tube from flex suitable for convenient rolling of a cigarette, I recommend printing it with a 0.4 nozzle with a layer height of 0.2mm, I used Flex from the Russian…
Fit more bottles in your fridge. This will help you stack bottles, without them rolling away. Works for bottles of 60mm diameter. (Most beer bottles in the Netherlands.) Fusion360 file included, feel free to modify for different size…
I didn't find a proper rolling pin in here so here is my design. It is more of a toy because it is a little smaller but could be used in the kitchen as well. Support is only needed for the bar. The handles can be printed without support…
I didn't have the right size bolts for the mount so I decided to see what I could make I took the Spool holder mount from the Creality K1 Side Spool Holder, and attached it to the spool holder from the file I used for my P1S. I angled it…
Rolling tray on the outside, drawer with rolling essentials on the inside. Are you ready to roll? The Hit Kit Rolling Kit houses one standard BIC lighter, three packs of king size slim papers, and one pack of tips. A simple spring…
Das Original von wildlifelove.de Unser Clip-Haken für die WIGO Rolli ist ein echter Dauerrenner seit 2023: Der erste Haken seiner Art für die WIGO Rolli Welle zum Einclipsen erfunden und entwickelt von wildlifelove.de Bequem nach dem…
Rolling Knife Sharpener with inbuilt planetary gearbox with Mechanical Advantage of 1:3 (HORL compatible) Important: This part is published under the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) licence!…
Edited from: https://www.thingiverse.com/thing:5821235 This is printable and depending on scale, the wheels can be be bolted on with M2 (100%), M3 (150%) or M4 (200%). Larger scaled would need a larger printer. I used heat screw inserts…
Fan of this model? A Like and a Make would be more than appreciated! Elevate your tabletop gaming experience with this versatile Twist-lock Dice Box & Rolling Tray , designed to seamlessly transform from a storage case into a rolling tray…
Fedezze fel a kazánkészési évenkénti! Az új, 3D-s nomatt kazán földrajzi árukkal együtt egy célunk, hogy minden horgász könnyedén és pontosan elkésett sajtsa. Az innovatív tervezésnek és a csúcstechnológiának megfelelő kiegészítőnek kell…
I always struggled to find a practical solution to carry all my cigarette rolling paraphernalia in a single container. Here's a box that carries your herb grinder, cigarette papers, a lighter, all your tobacco and other material and even…
A dice box I designed in preparation for my party's first DnD campaign. I wanted room for at least 2 sets of dice, a mini, and a rolling tray with felt/foam lined pockets to prevent the contents from rattling around. The overall size of…
Texture rolling pin for clays and epoxies. Can be used to create a pattern of hexagons. Great for miniature bases, scifi terrain, or even honey comb textures. You can run a small rod through the center to use as a handle. To avoid…
Do I really need to explain this logo ? Hope not :) I wanted to make gift for my family and I was not able to find good enough model suitable for three color printing to match original logo : black background, red lips and tongue and…
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Use these rollers to add texture and patterns to clay projects. You can roll them by hand or print the handle to make them easier to move. The handle needs two sets of 20mm long M4 pan-head bolts and nuts (or you can use round-head bolts;…
Remixed from https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements For instructions please see original link. Added: - 6003 — 17/35/10 - 6204 — 20/47/14 I printed mine with a 0.20mm line height profile…
The goal of the game is to sort all balls by color. The game has the same structure on the front and back, thanks to the middle piece, the balls can be transported from right to left and from front to back. You need 4 screws M3x16-20 and…
Want to make the best use of your papers? With the custom cone roller tool, you can now roll cones with the maximum end diameter possible! Notes: Cone Tool can be printed in vase mode. For even packing and difficult-to-reach areas, the…
Pocket rolling station in (Altoids Tin) Transforming rolling x tray I added the bottom curves for easy removal print 2 Bowl Buddy: https://www.thingiverse.com/thing:1968807 Holds: Mini Bic Lighter 4x Filters (1 1/4 size rolling papers) 2x…
I tried to recreate historical rolling nut trigger mechanism for crossbows in a way that will make it reasonably accurate, but also printable and good for toy crossbows. Use nails glued in, or metal screws, for axes and stop-pin limiting…
A fun and modern 3D printed door corner sign featuring a “Scrolling Room” design with a minimalist silhouette of a smartphone user. Perfect for adding a bit of humor and personality to your space — ideal for bedrooms, offices, or any tech…
Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to form divots on the edge -- kind of like washboarding on a dirt…
Print everything 0.2mm, 3 perimeters, petg
The settings I used: CounterWeight_1n2: 0.2mm layer, 2 walls, 100% infill Head_Face_Arm: 0.2mm layer, 1 wall, 0% infill, 3 top shell layers, 2 bottom shell layers (Speed 30% slower than what I normally use for the filament) Wheel: 0.2mm…
Quick rolling tray since I needed one. Handy spout to load a bowl or whatever.
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
This model is based on the Creality Ender 3 S1 Pro stock spool holder. Each part (tube, caps, shaft) is designed to be compatible with the original holder to allow for partial replacement or modification. Required Hardware This holder…
This is a complete redesign of the Rolling Storage Box . This redesign is much much larger and includes many of the updated features that were added to older versions of the Rolling Storage box. https://youtu.be/wqrAZMdrNLQ…
This is remixed from Prusa Bear 2020 spool holder which was remixed from another holder (we are all just using the amazing holder). This is honestly the smoothest rolling spool holder I've made and tried. I've included the step file for…
Die Idee des rollenden Würfels hat mir sehr gut gefallen, deshalb habe ich ihn in abgewandelter Form nachgebaut. Zur Vereinfachung habe ich die Kugellager weggelassen. Für ein magnetisches Gleichgewicht habe ich links und rechts im…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to tile with a fancy diamond inlay pattern. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
Original https://www.printables.com/model/952313-filament-dry-box-with-rollers He has a good YouTube video showing assembly, I ended up assembling completely differently, everything I used is on this remix. (see assembly below) If you…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to cracked earth like you'd see in a desert, or cracked asphalt for an urban warzone. Great for miniature bases. You can run a small rod through the center…
An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz. Details see: https://en.wikipedia.org/wiki/Oloid And it is fun to play with it! Print instructions Print in PLA and 0,15mm. Glue together after…
Replacement side latch for Stanley rolling workshop / toolbox. Stanley part number: 19500300 It fits my Stanley STST18631 toolbox and other models as well. I printed in PLA with 15% infill. As of May 2025 it has held for ~3 years and is…
This is a great planer board that works well for trolling. I use them in a small 12' fishing boat and I can run 4 poles. I have tested these quite a bit. I strongly suggest a raft because of the knife edge that will curl from the heat.…
Rolling doors box The box has space for a label, which also serves as a connecting part. * April 2, 2022 Rolling Doors Improved I will add better photos and other sizes of the model later. Recommended printing options Rolling door Pcs: 1…
This is my old design of trolling fishing boat rod holder. I used PETG and 30% infil.
ROLLING CLOTHING DISPLAY ,hope you like it
Rolling tray/ Bowl with magnetic cover ________________________________________________________________________________________________________________ Dimensions and printing instructions: 160mm X 100mm X 15mm Printed with 0.1mm layer…
I was missing some of the Garage slats , so i reconstructed them. Please note, they are not compatible with the original ones, So you must allways use the original OR mine, you cannot mix them. Print as many as you wish. You need to print…
La parte tonda che richiama i vecchi telefoni di casa tiene stabile il dito sul pomello aiutando a far scorrere più velocemente il menu.
This magical box is perfect for storing your dice. Designed to fit a standard 7-piece dice set used in many RPGs, the lid of the box doubles as a rolling tray to keep them by your side for your entire session. Prints easily without…
Made this for myself and turns out its very popular and would like to share it v2,v3,v4 are all works in progress but very close to being final. Print settings I printed it 20 % infill 3 bottom layers, 5-6 top layers depending on your…
Introducing the NokBox , a compact dice-storage/rolling-tray solution for my TTRPG players. I wanted to gift my players custom dice boxes with different lid graphics for each person. First I needed a box design with a lid that can serve…
I love what @Judhini_1605028 did to create the original model. It was just too difficult to get it to roll smoothly. I added bearings and a counterweight. I like to create 3D models that follow these criteria: Do not require supports – I…
As rolling pin came only with 10mm, 6mm, 3mm, and 2mm spacer rings I added also others (1mm, 4mm, 5mm, 7mm, 8mm, 9mm) ... scad included Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200…
So, this is, to date, my largest and most complicated design/print yet! If you are like me and have cabinets full of canned goods - always be prepared! - you know what a hassle it is to keep those rotated so that the oldest cans can be…
Larger spacers for the Joseph Joseph rolling pin . The largest it came with was only 3/8" (10mm). I recently needed one that was 1/2" (13mm) and designed my own. Also included larger ones for 3/4" (19mm) and 1" (25mm). Here is the source…
Its the Rolling Stones logo no more
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
This collection includes some of the basic items needed for making 3D printed trolling flies. Fly heads, one with 6mm eye recesses and two with 8mm eye recesses. Double cone bead spacers, which can be used with 6-8mm acrylic round beads,…
A simple to use device to roll under your foot. A very good friend at work wanted to purchase one on-line but could not find any in stock. She asked if I could make her one, and I did. She likes it a lot, so I thought I would share this…
I have trouble picking up small dice, especially when there are many being rolled. So I designed a quick pour tray, where you can easily slide “keep” dice into a snug column and then pour the rest out of the tray quickly. Very nice for…
https://youtu.be/kBOUSn0DBy4 Du benötigst zwei RollenPruefstandEnde, und für jeden Rollenbock jeweils ein Rollenbockgelagert und RollenbockStiftlager. Außerdem werden pro Rollenbock noch 5 Wellen Ø 3mm x 20-25 mm 5 Kugellager 683ZZ 3x7x3…
Prints in place with 10% infill and tree supports. Tested only with PLA but no reason why other filaments wouldn't work. I added a drop of dielectric lubricant on each side of the roller and a strip of grip tape in the center to ensure…
A modified version of Rolling ball by soullock on MakerWorld. I also made a 6mm version because I had 6mm glass balls and used that instead of a 3d printed ball. The connector has a very tight tolerance but should still fit or shrinking…
This will not fit the MK4 (yet). As space is limited in my cabinet I created a low-profile version of the "Smoothest Rolling Spool Holder". A filament-guide is highly recommended to avoid the filament tugging against the upper frame. 2x…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to crosshatched metal with bands and rivets for an industrial look. Great for miniature bases. You can run a small rod through the center to use as a…
I have been working on this project since November 2017 and have been enjoying it so much that it is time to share it. Features include: Accurate Clock refresh off Internet Time Servers Local Weather and conditions (refreshed every 10 -…
