Search results: ronic

Lamp Bulb Idea Electronic Circuit wall art

Try printing at 80% of speed and very hot bed (75° ?) Best R

Spudger Set (Electronic Disassembly Tools)

Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…

Precision Tweezers (Electronics & Clockwork)

A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested

Prusa MINI Z-Top | Electronics Box Lid

Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…

Electronic Dice

Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction

Electronics Sorter Box with IKEA SKADIS mount

This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Prying Tools for Electronics (Spudgers)

Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…

Ass Up Chronicles.

Small-Parts organizer box (Electronics, screws etc.)

Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…

Motion Follow Eye Animatronics

Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…

Mini portable electronics workshop

Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…

WERA electronics screwdriver holder

Simple holder for Wera electronic screwdrivers.

Electronic Enclosure

Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:

Battery cover for Electronica (Электроника ИМ) game

Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…

ender 3 electronics fan

fan for silent and safe printer

Alesis Electronic Drum Clamp Mount

This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…

Raspberry Pi 1/2/3/3b/4/4b/Zero/2/W Standoff for electronics placement

A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…

Prusa Mini Electronics Enclosure Fan Cover Mount

This is a modification to the Prusa Mini electronics/controlboard enclosure top cover to add a 4010 cooling fan. This modification will provide active air cooling to help keep everything cool especially over long prints (18h+) in hot…

Voron V0.2 Electronics DIN Rail Bracket

A bracket to mount a DIN rail in the electronics compartment of a Voron V0.2 The design is inspired by this model but a completely new design. Instead of a friction fit the rail is mounted with a bolt into a heat insert. The pre-sliced…

Organizer / Box for small electronic parts

Box se skládá ze dvou částí, horní část vypadá skvěle při tisku transparentním filamentem. V příloze jsou dvě verze, jedna je pak průhlednější, druhá pevnější. The box consists of two parts, the upper part looks great when printed with…

Perfboard electronics case 5x7cm

Printed the top part without bottom or top layers to create holes for heat dissipation. Warning! Uses heat inserts to screw top in. Parts needed: 4x m3 screws 4x m3 heat inserts

David Clark headset Airbus electronics module holder

This will hold your David Clark controller box (either the DC One-X or DC Pro-X/X2) on the window headset clip. The controller box is designed to hold the box in only one direction, however the tolerances are loose enough that you can…

ARRI Alexa Electronic Viewfinder Cap

The ARRI Alexa Electronic Viewfinder cap was designed to keep the glass covered when not in use.

Electronic Test Cable Hanger Tray

Simple design to help neatly store electronic test cables. Printing Instructions Mine were printed with PETG using a 0.4mm layer height and a 0.6mm nozzle on a Prusa MK3S+. Infill was set at 20% with a rectilinear pattern.

The vernier caliper: a new lease of life for defective electronic calipers

Converting a broken electronic caliper to a vernier caliper A few years back I bought a cheap caliper of the Aldi "Workzone" brand. This particular unit consumed batteries faster than I consume chocolate, and one day I found that the unit…

ESL Tool for removal digital electronic shelf labels

Supermarket Accessories Removal Unlocking ESL Disassemble Tool for Digital Electronic Shelf Label Price Tag Holder

HSW Klein Electronic Level Holder

I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…

Battery cover for Electronica - LR44

Printed with PLA, nozzle 0.4mm, layer height 0.15mm. Included G-code is from Prusa Slicer for MK3S printer. Satin Powder-coated Sheet by Prusa3D.com used for print.

Prusa MINI power adapter holder (DELTA ELECTRONICS)

This is a remix of the idea of Christian EM . The Prusa MINI comes with different power adapters. Mine came with the one from delta electronics . Therefore i decided to build a new holder from scratch, based on the design idea of…

TOPEX Vice Jaws for electronics

Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…

Ender 3 pro front electronic box left and right side (silent)

Ender 3 pro/v2 front left and right electronic box Right Box for 6 buck converter LM2596 (work in progress for Raspberry pi3b/3b+/4/zero) Cover fit a Noctua redux 80 mm x 25 mm with grill (I like overkill cooling… and cheap on black…

New base with electronics housing + post for 200mm PC Fan Desktop Fan by Hijinx

New base with electronics housing + post for 200mm PC Fan Desktop Fan by Hijinx. The base allows to add a DC jack and a power switch to make this cool fan even better to use. Notes: You will need some tools and parts to connect the…

Electronic Tape Measure for Component Reels

This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape. I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit. Search amazon…

TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct

Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…

Electronics Enclosure SKR v1.4 Turbo BTT EXP-MOD

This is a work in progress and will be updated as I finish my build and dial in the part. Custom enclosure for Big Tree Tech SKR v1.4 Turbo main board and BTT EXP-MOD stepper motor driver expansion board. The cooling fan used is from the…

Stojánek a vrtulka pro elektronickou sadu Micro:Bit

V hodinách využíváme programovatelné desky Micro:Bit a někdy také rozšiřující elektronickou stavebnici dost podobnou sadě micro:bit Basic Coding Electronics Kit od Elecfreaks (v Čechách ji mají např. tu:…

Tarmo5 cable management and electronic holder using ESC 10BL120A/60A

I don't like cable-ties. This mods uses the 4 existing holes on top of the Tarmo5 main-frame to fix this cable-management adapter. You click the Electronic Speed Controller and it snaps, hold it tight. Same for switch (a bit harder to…

Small electronics testing plate

Simple print of breadboard plate for electronics prototypes. I recommend to add some self adhesive rubber pads to prevent sliding, eg. https://www.amazon.com/Square-Self-Adhesive-Rubber-Furniture12mmx12mmx6mm/dp/B00H8UTNY4 Spare space is…

Accessories - Box(es), extensions and more for electronics CG Scale / Zubehör - Gehäuse, Verlängerung und mehr für Schwerpunktwaage

Accessory parts for noticeably big, variable CG Scale. All the way from a F3x glider to anything like a 25kg warbird or jet! Additions and some remixes of the original CG scale parts from here ……

Mean well LRS-350-24 electronics cover for MK3s+ & MK3.5

Basic cover that bolts directly to existing mounts following removal of Original Black 24v power supply - see pics. Single bolt attaches the LRS to MK3 S + or mk3.5 frame and 2 existing bolts can be used to attach the new cover. A slot is…

Housing for electronics with ventilation grid / Elektronikgehäuse mit Lüftungsgitter 60 x 100

The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).

Ender 5 Klipper Electronics Case

NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…

elettronica ender3

elettronica ender3

Electronic housing for XL4015 module (and similar ones)

Housing 1 for a module. Housing_2 for two modules, I use these boxes with the XL4015 DC/DC 5A converter module, powered by a 12V battery, to adjust the voltage to different components of my telescopes. Each casing requires four Ø3x8 mm…

tc electronic Clarity mounting plate 1/4"

I did it with 0.15mm in pet for better heat resistance. For installation you need 2 M5 12m Screws and a ¼" Brass insert, I used this one:…

Electronic magnifier for people having low visual capacities (AMD, ...)

This is a magnifier based on a webcam and a tablet. You need: A tablet (only tested on Android) A webcam “Razer Kiyo” or “Angetube Webcam 967” An OTG adapter to connect the webcam to the tablet A photo camera screw (0.25" / 20tpi) 15mm…

Steyr 6300 Terrus CVT - rearview mirror electronics cover

The photo shows the original cover and a copy together with the tractor :-)

CNC 1610 - Electronics Enclosure

Controller board enclosure. I've designed this so that you need to remove the spacer pieces from the board. The PCB can be secured via M3 x 8 mm screws to the enclosure, not additional requirements on there. The cable cover snaps in…

Tronic charger wall holder

Simple wall holder for Ni-MH / Ni-Cd charger Tronic (Lidl) TAL 1000 A2. You need two pcs.

Sigtronics aviation headset mic clip

This is a replacement clip for the microphone cord on a Sigtronics aviation headset, it may fit other brands but I do not know for sure. I printed mine in PETG and it works perfectly, at 0.15mm layer height it is about an 8 minute print.…

FAO Schwartz Electronic Laser Tag Vest Receiver Repair

The FAO Schwartz Laser Tag electronic game includes a “vest” containing the receiver which signals a hit from the opponent's laser gun. The vest includes straps which connect the receiver via 4 brackets. The brackets often fail as the…

Remix of JKTech's Updated Enclosure Electronics - V2

I previously built my own version of JKTech's printer enclosure using MDF instead of aluminum extrusions, so I had to modify this to fit my enclosure. I adapted the main body so I could screw it directly to my enclosure frame.…

Low profile screen stands for Beetronics screen

The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.

Indoor Motion Sensor Adapter/ Bewegungsmelder Adapter HOFTRONIC/ Spelsberg

Adapter for indoor motion sensor I designed this adapter for an indoor motion sensor from HOFTRONIC™. It can be mounted directly to the ceiling junction box U86 from Spelsberg. Optional two cable channels with 15mm will cover the wires to…

Ultra-Slim 60/90/120 cm LED Batten Mount (V-TAC, Ledvion, Hoftronic)

Ultra-Slim LED Batten Mount — V-TAC / Ledvion / Hoftronic compatible Replacement mount for ultra-slim LED batten fixtures with semi-round diffuser. The included OEM clips are flimsy and tend to slip — this print holds the batten tight and…

Lasercut base for MK3S+ electronics and PSU with room for dampening foam and paver tile

I purchased a BLV enclosure kit (https://www.printables.com/model/73738-blv-enclosure-beta), but didn't want to leave my PSU and electronics inside, so designed a lasercut base for the enclosure to hold the PSU and electronics. It is…

Beijer Electronics x2 Pro 7 cut out form

Use PTEG or PLA. Good as a form to cut out BE x2 Pro 7 panels.

Beijer Electronics NX plate

Settings: PLA or PTEG Vertical walls 6pcs Organic support Printed standing on side V6 has opening for earth plate in back rare more screw holes and a stronger fortification.

Safe-O-tronic LSW101 Battery Lids

2 lids. Best to print them “standing up” to maximize strength in the tabs.

Beijer Electronics CloudVPN holder

Use PLA. 3pcs horisontal walls.

Engineer hourly rate for electric electronic and 3D jobs

Engineer hourly rate for electric electronic and 3D jobs remix of https://www.thingiverse.com/thing:7074081 i added my own logo

Fysetc F6 electronics cover for Prusa clone

This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…

Case for KT-elektronic LED - Solar Kit

Case for KT-elektronic LED - Solar Kit This case has been created to instell the KT-elektronik LED - Solar Kit in a case which is easy to mount on a 12mm tube. The following parts are neeeded: SOL-KIT 4-VAR ( available here ) Battery…

Plantronics Dispatch Battery Laser Marking JIG

Plantronics Dispatch Battery Laser Marking JIG This Jig is used to laser mark batteries for identification and ownership. Caution should be used when Laser marking any surface, especially battery cases. I am using a SainSmart Kortek IR…

Protective Case for Fragile LED Magnifying Glasses / Electronics Repair Goggles

Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…

V1 Chronicles of Drunagor - Standard Monster Health Stand

This is v1 of the model. Please see the new model v2 here: The original plate for inspecting monster health really sucks honestly and takes a lot of place on the table. Therefore I created this stand. Easy to print (with supports) and use…

Coffin with Sitting-Up Skeleton (Halloween Mechanical Animatronic, OpenSCAD)

Description What it is An animated Halloween decoration. A TT B-LA001 gear motor turns an eccentric cam, the cam lifts a pushrod, and the rod pushes a lever under the ribcage. The skeleton’s torso pivots around the pelvis up to about 55°…

Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing

Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…

Easy customizable / parametric electronics project box case enclosure housing by pbtec

Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…

Magnetic Connector for Electronic Projects

Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…

Modular drawer for electronic components (Vase mode)

Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…

Animatronic Eye Mechanism ε3.2

The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…

The RIG (R1.1) — DIY helper stand for testing electronic components

ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…

Atorch DL24 Electronic Load case

(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…

Modular stand for electronic microscope

This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…

Animatronic FNAF Bonnie

Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…

Brain Electronic Circuit - Wall Art (Larger - With CPU)

Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.

Electronics Schematic Stencil (Credit Card Size)

A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists

Snaptronics – Solder-free electric circuit construction kit

Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.

Brain Electronic Circuit remix

Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…

All Original Ball Joint Animatronics

I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…

Electronics parametric box V2

Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…

Veronica : 6th Station of the Cross

Veronica : 6th Station of the Cross calvary in Retz, Lower Austria. Made in 1727

Ender 3 all in one, universal rear electronics case

A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved

IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…

Ohm's Law Circle Cheat Sheet - Electronics

Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)

External Electronics Box for Ender-3 Pro

This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…

RatRig V-Minion Electronics Enclosure

Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…

Easy parametric box / enclosure for electronic projects

Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…

Boxes for diy electronics projects

The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws

3-Pin Magnetic Connector for Electronic Projects

Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…

Oral-B electronic toothbrush travel case box

I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard)

Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…

Electronics parametric box OLD VERSION V2 Available on my profile

OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…

Sabine Wren Cosplay Helmet (w/ electronics and paint lines)

This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…

Animatronic Terminator Eye

Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…

Atorch DL24 Electronic Load module Case

This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…

Chronicles of Drunagor Playerboard

You can print as one piece or in 3 Pieces for smaller printers and glue it

3D Printer Electronics Enclosure

NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…