950 models
Tired of making knots? I was, so I designed some fast to print hooks with a special twist: they hold up strong but are easy to use. You clip them on, then you tension the string by puting it into the little hook, this will ensure a strong…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!! Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
Here's a holder for 12 Army Painter Warpaints bottles. My design intent was to keep material usage to a minimum.
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Arnold Jidáš Rimmer, BDP. SDP. Maaaaaaaaaaaaaaaagooooooorrrrrrr!!! :))
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Einfüllhilfe mit Pressstempel für das Edelstahlpulverpad für Senseo Kaffeemaschinen. Randaussparungen durch den Einfüllring, damit der Deckel eingesetzt werden kann, ohne Pulver einzuquetschen. Edelstahlpulverpad:…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Designed and printed some buttons to fasten a tarpaulin roof to my porch. Used 4mm countersunk screws and it works great.
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
a remixed model to let bottles stay fixed at mid air even when the box is shaked
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
This is a 1/8'' (3mm) height Riserpad for longboards.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
needed something to hold my spare earpads when I was wearing other ones.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Krpan Fernsteuerung Halterung für Montage in Fahrerkabine
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
a decorative panel for the ikea fräck mirror
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Two boxes to hang a Luxorparts Pro 60 W soldering station on a Multiboard wall. It consists of a box for the power unit and another box for the soldering iron. The boxes have cutouts for the cords going between the iron and power unit,…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Clips for AIAIAI E08 Alcantara® leather earpads . They are primarily designed to secure leather that has peeled away from the plastic or to protect it from peeling. Secondarily, they serves as a stylish design element for the headphones.…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
DWARF TRPASLÍK
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…
15% infill or more Scale to preference Supports on
Update 06.02.2025: Added Version 2 with slight adjustments to the rocks, next to the rail. Added STL-File. --------------------------------------- There you go, a small tunnel with an overpass, derived from jdormer9 's perfectly designed…
This is a tunnel remixed from my remix of BasD's "Model Train Tunnel". The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has a flattened bottom and an overpass that crosses the mountain…
对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
Verified and tested, it works fine now What is this? Reverse Integrated Drive Gear Assembly Sherpa Mini with mellow helical gears This helical gears was for Vz-HextrudORT CNC version Why not use bondtech BMG Reverse Set? because i can't…
This is a lower profile mount for the v400 speederpad to mount to the chassis rather than on it's (actually really nice) stand. The bare, shaped mount ( V400 Attachment / Mod Starter ) to fit the chassis was by Trayal on Thingiverse:…
A remix of JB3D's design that eliminates 3 parts, exchanges a single 5mm('ish, you can use anything from a pen to a 7mm diameter) spring for the two springs of the previous design, and uses a standard exacto #11 blade instead of a 9.2mm…
.ased on the official Voron 0.2 Bowden Toolhead stl. Now updated for 0.2r1 Needs 2 brass heat set inserts, the back screw needs to be replaced with a 20mm length one.
Sherpa mini with the zero and ecas mods combined into one also modified the tensioner arm to work with a heatset insert.
Direct drive sherpa extruder conversion prusa mini for printing TPU filament dual drive super light weight about 117grams Printing 0.4nozzle TPU85A 50mm/s @0.23layer with ease Installation Instruction:…
Use this bridge set to have a highway overpass above your trains. The "short" piece can be used as is, and the longer piece is designed to that multiples can be glued together. In the pictures above, the long bridge is two pieces…
This is a low profile mount for the Ender 3 and the Sherpa Mini Extruder. The mount has a special cut-out for the original BL-Touch mount. You can print it upper2bottom or back2front (with supports) - most strongest is back2front. Also…
The FreeCAD model is available in case you need to change the diameter of the screw holes (M1.4 6mm countersink). The charging cable can be removed without unscrewing the battery holder (which proved to be useful when you need to leave in…
This replaces the housing core part of the Annex Engineering's Sherpa Mini Release 2 extruder to accept an ECAS coupling for the reverse Bowden feed. Has non-round geometry to allow printability and minimal force to push-in. Other designs…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
Adds sherpa mini support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. This is an…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
⚠ UPDATE ⚠ Following numerous feedbacks, I upgraded the upper and lower shell in a third version (Flsun Speeder Pad V3). In this version the tolerances are softer and reinforcements have been added to make the body more solid.…
This is a Sherpa Mini Mount for the Voron 0.1 3D Printer. The Sherpa Mini being quite a close fit to the stock Mini Afterburner makes this a very practical alternative for the Voron.0.1 with the added bonus of less clogging, easier…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello 3D Printing friends. The idea for a filamentcutter arose after i installed an ERCF on my Voron 2.4. But none of the existing could…
This is just a model for the carrier plate component of the MK4 X-Carriage . This Model needs brass inserts which can be inserted into slots with a diameter of 4.6mm. The Model also has Attachement holes for an adxl345.
This is a remix of Jrlomas ' Sherpa Crew Mini. You can read about it on the original model's page. My changes are listed in the appropriate section. Why is this a thing? → Added performance, as in more grip (sherpa's limiting factor) and…
For those who want deeper earpads on their Audeze Maxwell. These spacers increase the depth of the standard earpads by 10mm. Audeze Maxwell uses a turn and lock mechanism to fasten the earpads, so these spacers snap in place using the…
This model adapts the V0.2 Umbilical PCB holder to be compatible with the DragonBurner toolhead and the Sherpa Mini as the extruder. You need 4 standard M3 heat set inserts for the spacers. The original spacer are not long enough and have…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
This is an HO scale model of the CSX railroad bridge over the Norfolk Southern railroad in Beaver County, Pennsylvania. It was built in 1909 and is still in service. The bridge can carry 4 tracks over two separate double tracks. The model…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
For this build you will need (refer to photos): 6x heatset insets (M3x5x4) 2x M3x16mm for X Carriage 2x M3x8mm 2x M3x18mm (can eventually be used 20mm, but with 1mm washer on top) 2x M3x12mm 4x M2.5x8mm 8x M2 6/8mm 8x M2 nut around 15mm…
Bonjour, Edit : ajout porte lame V2 (Meilleur mouvement, ajout d'une courbe sur le levier coulissant permettant de réduire le mouvement lors de la coupe) Fichier Zip Réalisation de la V2 du filament Cutter pour Sherpa Mini (Compatible…
I made these to clip on the flex steel bed sheets to avoid warpage on large models. I wanted to make some that didn't require any screws. These should fit pretty well. Make sure to print them out of something that can withstand the heat.…
Luftfilterpatrone für alle Simson Modelle
I like the original design but there was no tilt in the holder. Added about 10 deg tilt to the holder. Rounded the curves for the brackets that clip on to the V400 frame. Extended the portion of the bracket that has the dovetail receiver…
The original mount relied on a machined effector plate to fit an original e3d hot end, but this resulted in a 4 mm gap between the housing and radiator, when used with stock radiator. Also, I removed the nut pocket for the radiator. It…
You would need to print: Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod) 4 lane adapter with runout sensor (I've printed one from transparent PET) Important information:…
here is the WristWatch BMG extruder but with Sherpa Holes mostly everything's unchanged the original repo: https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_Extruder_BMG
I always thought that the Brio lifting bridge is built for letting trains go beneath it, once it is lifted. That was also one major reason I bought a 3D printer, actually. It's compatible with the "old" lifting bridge I played with when I…
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
Want to take your voron 0 to the next level? with the modular mounting system of the after sherpa and the increased cooling capacity of the mini stealth, you get just that. on top of the benefits of the increased part cooling with dual…
Multiple people (including me) stated that they needed more clearance for the shaft bearing, or that they had added washers as spacers to get it to fit. This fixes that issue. I also removed the need for supports. Without my modification,…
Adds sherpa micro support to the EVA3 ecosystem. You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier. Fasteners…
Edit : ajout de la version Xol (Non testé pour le moment) Edit 2 : ajout du fichier Step, je suis en train de tenter une version avec levier mais pour le moment je suis limité dans mes compétences en modélisation Filament Cutter pour…
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it. If you are using the LGX Lite mount…
Used in a Voron 0.2 setup with: Dragon Burner BTT EBB36 CAN board - **warning**: not compatible with max31865 for now! Sherpa Micro extruder BOM: 2x 25mm aluminum standoff 4x M3 x 6 mm BHCS 2x M3 x 10 mm BHCS 2x M3 x 4 x 5 mm heat insert…
If you like my parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Please take a look at the newest version of this cutter This is an evolution of my Dragonburner-filamentcutter. This Model is not fully…
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
WARNING: With 10mm high fan, Y must not go under 4mm, front screws that hold the fan will hit enclosure door. I wanted a more maintenance friendly voron 0.1 print head with sherpa mini extruder, also to be as light as possible, so I've…
A Simple Sherpa Mini Directdrive Remix of the Satsana for the Ender 3 V2. Additional parts you need for this remix: 2x M3 Brassinserts (I used Ruthex) 2x M3 x 12mm Screws Sherpa Mini The BLTouch Mount you can find in the Remix Satsana…
UPDATE: Version 2 uses the same holes that mount the EBB36 to interface with the extruder mounted standoffs and moves the bottom holes approximately 16mm downward to create more clearance for hotend wires from the terminal block. The…
As my V-minion is now using Sherpa Mini so I remix this for EVA3.0. Similar to EVA2.4, the two M3 bolt at bottom of Sherpa will also be used to fix on the mount. Note! The model is not printed and tested A Lighter version is updated.
This is a spin on Annex Engineering's Sherpa Mini extruder, just with integrated collet holder. Uses 4mm UM2 collet : UM2 Collet - Aliexpress **Note : The Step file if directly sliced may throw non-manifold edges warnings, just repair…
Same rough design as the original model, except that the screw holes were resized and moved. Print it and mount it to the wall with some anchors! Additional pass-through holes are provided you let you get a screwdriver in to access the…
Couldn't find quick release plate compatible with my Velbon Sherpa 250 so I have designed my own. QB-157.stl - first version - cavity for screw head is about 5mm. QB-157 deep.stl - cavity is deeper for bigger hardware. Print instructions…
Modified the 4 lane Pico MMU Hubs to use ECAS04. I wanted a easier way to disconnect the PTFE tubes because I'm constantly changing things on my printer. This also prevents the PTFE tubes from popping out. I've also optimized the filament…
Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…
***************** *** ITALIANO *** ***************** Non è più un problema stampare il TPU con la Super Racer! Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno…
Postavičky doporučuji ½ velikosti jako dekoraci na poličku. Na modely je potřeba nastavení podpor . ruce ,líc čepice atd.
Sherpa or TBGS extruder Direct drive conversion for Prusa mini V2 Dedicated to those who can't stand the prusamini bowden system, or those who want to print flexible filament. Compared with the previous version, this version lowers the…
Since I was struggling getting reliably good filament tips with some filament, I decided to make my own design. First I tried The Printing Shark's design, but I did not like how the spring worked, or how the blade was mounted. The general…
The original file is a speeder pad holder for FLSUN V400. All works well for the SuperRacer except the bracket for the printer side tower. The rest of the holder can be found here:…
V3.1 Is now released - New features; 2mm thicker top mount - 0 visible flexion now @ recommended print settings Added some parts to increase rigidity, moved cable tie hole Tidied up design -------------------- DISCLAIMERS: Print on TOP…
0.20mm x 3 loop wall x 100% + tree support
Unser kleines Nashorn hört den ganzen Tag seine Lieblingsmukke von Dikka rauf und runter und wir feiern das natürlich sehr, da es keine auf kindlich gemachte Musik, sondern ernsthafte Musik für Kinder ist. Da er so ein riesen großer Fan…
The slope relies on standard "D" tracks (straight, ~200mm long). Slope angle is 15deg, slope radius is 80mm. Reuploaded from Thingiverse with separated files for easy printing
Increible pescado para jugar, para decoración o incluso para bromas en pecera. Impreso en PLA a 205º y con la cama a 60º. Se usa soporte que se retiran facilmente. Escable y editable. Tambien se puede imprimir en PETG pero a 240º y la…
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Mini extruder (link to github below). Prints have been…
This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in…
The flux press is designed for spraying a diameter of approximately 18.5mm To assemble the flux press first connect the lever to the arm and then the main body to the arm. As a joint I glued shortened nails in the holes, to ensure the…
The new EBB36 Gen 2 has a different type of CANBUS connector. I wanted a new bracket to hold the plug stable on the EBB36. I found a suitable design by @1word4WORDS_2139936 for the WWG extruder. This remix tidies up the design to suit a…
I needed an ECAS Sherpa Mini and stumbled across diedirk's great model with the Zero mod built in. Needing a filament sensor as well, I modified the front housing and the lever arm to accommodate an external microswitch. Use a brass…
Conector Esquinero para Carpas Indoor – 3 Vías (Modelo 3D) Diseñado para estructuras ligeras, este conector esquinero de 3 tubos permite unir perfiles de forma firme y precisa, ideal para carpas indoor, sistemas modulares o soportes…
1/2" UNF CW threaded moderator for .22 cal pellet guns. TPU is the most effective, but nearly 70 grams. 2 wall ABS with bare minimum infill will be about half that. Single wall ABS feels like it would fail spectacularly.
I had to replace the broken box of an 30 years old “Quartett” card game. Printed nice in extrudr PLA NX2. Card size is appr. 65mm x 100mm. Scaling in slicer could work. ----------------- Ich musste die gebrochene Hülle von einem 30 Jahre…
just a sherpa extra heavy with micro mounting hole locations
As I finished up the build of my Voron 0.1 I of course printed the Mini Afterburner. I found the assembly to be difficult and the entire time I had visions of taking it completely apart for any maintenance. After doing some research I…
Heyho :) Here is part 2/3 of my DIY projector screen project. A practical fastener for the screen (or other thinner objects). It works quite simply and reliably (already tested for a few months on high tension). Part 3/3 of my project is…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI LUCKY PIG – Tiny,…
When putting a filament spool inside the vacuum bag, it is often difficult to press the vacuum pump against the valve if the spool is large/or wide. It is easier if there is a higher counterpart, and this model provides this. It was…
Filament Cutter for Praying Mantis Printhead Fits to Sherpa Mini, Hextrudort, HGX lite and Orbiter Extruders as well BOM knife no.4: https://a.aliexpress.com/_EJTAJfR M2,5 nut M2,5 x 5 screw M3 nut M3 x 15 screw Sping frim ballpoint pen
The positions of the holes on the floor are the same as those of the sherpa. The gear I have is a crappy clone, on aliexpress a long time ago. Dimensions may differ from the genuine product. Precautions when printing are the same as…
Eckverbinder für Gehäuse mit 5mm Plexiglas... M4 Senkkopfschrauben Corner Panel Joints for Housing with 5mm Perspex
