1,164 models
This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
saddle holder for Schleich Horse Club, easy to print, easy to glue the gcode and 3mf file includes manual paint-on seams for (hopefully) optimal printing my other parts for schleich horse club:…
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant
If you, or someone you know could benefit from a model/print like this (especially if you don't have access to a 3D printer), please reach out to us at [email protected] and we'll see what we can do. If you're enjoying models like this,…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
Hidden Airtag Saddle Holder This is a handy holder that keeps your airtag hidden and safely attached to your bicycle. This is not a clip-on to make it harder to remove, instead the two halves are held together with four screws. The bottom…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
The Flexi-Trex by Benchy4Life is awesome. Now this saddle lets your Lego figures ride on their own Flexi-Trex. Print Settings Prusa Mk2 Rafts: No Supports: Yes, if printing the whole saddle at once Resolution: 0.1 Infill: 20% Notes: I…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Foldable meditation board, nails are 10mm separated from each other.
Print approx. €15.55–€19.01 excl. taxPreliminary estimate for PETGSource material: PET
Mount for a small battery led backlight under your bikes saddle
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Apple AirTag mount specifically for the Ergon QuickClick supported saddle. Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm. Installation Do NOT over tighten bolt and risk cracking…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for PETGSource material: PET
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Inspired by the sand drawing tables and the beautiful project SAND watch by Studio AYASKAN , I decided to build my own sand-based clock with a little ancient theme. The sand becomes the watchface as the two marbles draw the time as a line…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Alsado keychain screwdriver for 1/4 inch bits "Colibri" A keychain screwdriver for 1/4 inch bits, including a bit friction fit and a bit compartment. Key Features bit friction fit prevents 1/4 inch bits falling out big keychain hole that…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
2 color earrings, Escher impossible shapes / Dvoubarevné náušnice, Escherovy nemožné tvary
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution BUT a design that wouldn't interfere with my saddle position being pushed totally forward like this one would . So,…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
This is a similar concept to @repe 's Airtag holder , but designed for Chipolo One finders. I've attached two lid files, one for bicycle saddles with round steel rails and one for saddles with tall carbon rails. Both are held in place by…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
The hook can be attached to a pole with diameter of 25mm. The 2 parts can be connected by a single M3x20 bolt and a nut. Háček lze připevnit k násadě o průměru 25mm. Obě části lze spojit pomocí jednoho šroubku M3x20 a matice.
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Remix of IBI Productions AirTag bike saddle mount
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Remix of https://www.thingiverse.com/thing:857803 by @abuharsky. Added two holes for zip ties (as you want to have the light on the way home) and with smaller interlock for common LED lights with bottom stop. – Very handy solution when…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
82mm diamètre intérieur 135mm de hauteur 3mm d’épaisseur n'hesitez pas à aimer et poster vos makes 82mm inside diameter 135mm height 3mm thickness do not hesitate to like and post your makes
Print approx. €10.01–€12.24 excl. taxPreliminary estimate for one variant
A Short Holder for the Figma Blaze rear light that fits the Fizik Saddel clip
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This is a custom saddle I designed to run ropes through. I have printed this on my Ender 3 S1, as well as on a Formlabs Form 3. Note: Running course ropes through this saddle may cause wear marks or grooves
Print approx. €2.70–€3.29 excl. taxPreliminary estimate for one variant
Cedulky do sadbovačů a záhonů, zejména do těch menších. S otočnou šipkou pro určení kterým směrem je vysazená jaká zelenina. Výměna barvy filamentu pro písmo a šipku. Gcode v úvodním rozpočtu platí pro samostatnou cedulku bez názvu,jen se…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have a Saddled Llama for you for diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Template for planting tray. A simple tool for creating holes in the dirt in a planter for planting seeds of all kinds. Thanks to the regular spacing of the holes, seed germination can be monitored. You will immediately see which seeds…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
My mother has always warn a crusaders cross and I thought it would be fun to experiment modeling one and send it as a gift. So here it is, if you have friends family or yourself want to display this then have fun
Print approx. €23.53–€28.76 excl. taxPreliminary estimate for one variant
This is a lid (cap) for a condensed milk can which measures 75mm of diameter. Print instructions Used PETG filament to print it using default settings on Prusa Slicer 2.0
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
V hodinách využíváme programovatelné desky Micro:Bit a někdy také rozšiřující elektronickou stavebnici dost podobnou sadě micro:bit Basic Coding Electronics Kit od Elecfreaks (v Čechách ji mají např. tu:…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
To reduce vibrations during prints, I wanted a simple way to mount the mk4 filament spool holder onto the wall or skadis wall. When using the Skadis adapter, i recommend using the additional “skadis_wallmount_standalone” (see picture) In…
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
This holder is for use with a digital depth gauge of the type shown in the pictures. Note that you need the type of depth gauge which has metal indicator stem with length extension. Although these have a plastic body, they are…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This mount enables secure attachment of a Büchel rear light to an Ergon bicycle saddle. It is screwed onto the two metal saddle rails. The holder is designed for a rail spacing of 41.9 mm (center to center). The rear light is secured via…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Some Bontrager saddles feature 2 M5 tapped holes, which is nice for mounting all sorts of things. Here is Bontrager Blendr Saddle Accessory Mount which uses these hardpoints. I have a Topeak saddle bag which I wanted to mount. Because I…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Zip ties hold this mount to the rails of your saddle while your Cygolite Hotrod, or similar, straps around the descending mounting position. A bump around the base retains the light incase of bumps shaking the light down. This is made for…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Print in PETG or stronger (ASA, Polycarbonate). Use 4 zipties to attach the holder to your saddle rails (the upper ones through the cutouts in the support rib, and the lower ones around the rail attachment and through the triangle so it…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Žáci se naučí vymodelovat si skládací destičky se základnou s různou hodnotou vyjádřenou v procentech. Cílem je vyrobení didaktické pomůcky pro lepší představivost a pochopení vyjádřené hodnoty.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Prensador para cafeteras italianas. Mide 72mm de diámetro y 50 de alto. Redimensiónalo a la medida de tu cafetera!
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
The Eta-Class Jedi Ambassador Shuttle appeared in Star Wars: The Clone Wars. It is very compact, the interior split between the cockpit and a small aft section. It's armed with three cannons, one in each wing, but I don't think they are…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Násypka a trychtýř mají tříchodý závit podle originální lahve. Tloušťka stěn je 2 mm. Odměrka je na 100 g. Moje tiskové nastavení: Petg Výška vrstvy: 0,2 mm Výplň: 50 % Perimetry: 6 Podpěry nejsou potřeba
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Dada la necesidad de usar la maquina dispensadora de agua y teniendo el vástago del paso del agua roto. Tomé las medidas de la pieza y la modelé a escala 1:1 para poder imprimirla en 3D. Primero la imprimí en PLA, teniendo una vida útil…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Žáci si nejdříve zopakují základní pravidla tvoření vět v německém jazyce a pravidla zobrazování krychle. Poté si sami zkusí načrtnout, vymodelovat a vytisknout pomůcku do výuky - kostku s textem.
Print approx. €9.91–€12.11 excl. taxPreliminary estimate for one variant
(EN version follows) Ve škole máme sady tělísek o stejném objemu a o stejné hmotnosti od 3B Scientific, které používáme při výuce Archimedova zákona. Válečky o průměru 20 mm vyrobené z různých materiálů jsou v sadách o stejném objemu a…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
The ordinary home trainers usually do not use standard bicycle saddles as known from outdoors. That is great disadvantage and literally “a pain in …”. My second generation of the adapter is a blend of 3d printed adapter frame which is…
Print approx. €7.86–€9.60 excl. taxPreliminary estimate for PETGSource material: PET
This model is from the Nintendo 3ds Game: “Tomodchi Life.” I tried looking for these and say no one had made any I decided to make them myself. Right now I'm working on something big right now but my printer is not cooperating so expect…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Žáci si vytvarují (nástroj Tinkercad) a vytisknou modely jednotlivých not, které mohou být využity v předmětu Hudební výchova. Alternativa: Žáci mohou vymodelovat i houslový a basový klíč ...
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
levá+ pravá část zavírání gola sady
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading "Sado Necro Bestiality", with art of someone beating a dead horse. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Crusader-Era Ceramic Hand Grenade (11th–12th Century Jerusalem) During archaeological excavations in Jerusalem's Armenian Garden, researchers recovered sherds of medieval spheroconical ceramic vessels dating from the 11th to 12th…
Print approx. €4.33–€5.30 excl. taxPreliminary estimate for one variant
Dieser Adapter wurde entwickelt, um die ausströmende Kaltluft der Lüftungs- bzw. Klimaanlage eines VW T5 Multivan effizient zu sammeln und über einen 100-mm-Wellschlauch gezielt in einen Hundekäfig zu leiten. Dadurch wird die vorhandene…
Print approx. €27.98–€34.20 excl. taxPreliminary estimate for PETGSource material: PET
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Batman. The Caped Crusader. The Dark Knight. Whatever name you choose to call him by he is sure to make the dust bunnies on your shelf…
Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
Print sideways (current rotation) with no supports. These mounts are designed to mount cables, devices, etc to a wall using nylon cable ties. Screw the mount to the wall through the middle, pass the strap through the slots on both sides,…
This is 3D printable model of the Ambassador Class NCC-1701-C Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles and some details need to be separated into…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
Garmin Varia Radar - Bicycle Saddle Mount - also available for similar light versions The possibility of securing with zip ties - adapted for the original garmin holder Minimal supports Fast and easy print perfect snug fit Double…
Rafts: Doesn't Matter Supports: Yes
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Background Codenamed Operation Dawn: 13th Dec 2003, American military forces conducted a search at 2 location outside the town of ad-Dawr. At first unsuccessful but a continued search led to a soldier kicking a piece of flooring, exposing…
Konverzní sada pro přestavbu modelu tanku KV-1 na verzi KV-1E. Základní verze KV-1 zde: https://www.printables.com/cs/model/219806-tank-kv-1-rc-model-110 Veškeré info pro stavbu najdete v návodu.
Special thanks to @sugarballs for the Idea! Summary: There are various version of this angled (15°) shotgun shell holder / side saddle available. On the uploaded picture (Maverick 88) I used the 12G_5pcs_25mm_angled_velcro version. As…
Updates: May 2024: Added a very tight 0.1mm tolerance version June 2024: Added LED version I designed this for my kid after they got a kyber crystal on our Disney trip and wanted to wear it. The design is based off the Jedi crusader…
Created by Aileen for a project of mine. Releasing as open source with permission of the author. Find her and more of her work here: Fiverr ArtStation - Aileen Z If you're enjoying models like this, please consider supporting us on…
Palisade Version 2: more irregular stone work holes for the pin in each end more different bends This palisade is perfect to surround your fantasy village with. With 28mm scale it stands to about 4 meters. Print without support. A…
A little yet functional drawer for Prusacaster to store extra picks
Defend your Viking village or fantasy stronghold with this modular palisade system! Designed for 28mm scale tabletop games, dioramas, and fantasy wargaming, these modular walls, gates, and corners can be combined in endless layouts to…
Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…
There are many design for this application but this is my version of Air Tag mount for bike. I wanted to make minimal and a little hidden one since it shall not be too obvious in my opinion. It utilizes the saddle rails to fix. (diameter…
Engrasador de cadena de moto para spray wd40
This mount fits one Apple Airtag under the saddle directly over the clamp. Printed with black filament the device is hardly visible. Assembly: 2x M3x16 socket head screw, 2x M3 square nut. Saddle rails: c-c 43 mm, ø 7 mm This model is…
Hide your Apple AirTag under your bike saddle. Out of sight, but the signal isn't blocked the way it can be when the tag is hidden inside a metal frame or tube. - Installs in minutes with just 3 tie-wraps (cable ties). No tools, no…
Pull out the original holder form the rubber an screw it together with my holder. You additional need 2x M4 Locknuts and 2x M4x15 screw and also a cutted off M5x17mm screw. Print with 100% infill.
I acquired an aged street bike in questionable condition early this summer and I absolutely love it! It's green, it's made of steel, it's got two wheels and all the other bicycle stuff. Only thing left to complain was this torture device,…
A 3D scan of a bicycle saddle. Prints nicely in PLA with 0.6 nozzle size. Requires lots of support underneath and careful removal to not damage the rails.
YTGRRL Summer Update!!! NEW BBD MAGNUM MODEL, now with EXTRA CLEARANCE for your baggage. By popular demand, the shaft is now LONG. This WILL lead to breakage, but I am here to please. Garmin quarter turn mount for Fizik saddles with an…
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
Dispensador de huevos estable
2 parts, head and body. From the game Disablo. Full version available for sale. Category: Sculptures
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
Garmin mount to take advantage of Uniclip system on the saddle for attachment
Based on the sad pet rock meme but now you can have it laying around your house.
1 1/4'' (Zoll) Anschlussadapter NICHT GETESTET! An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist willkommen! Bitte beachtet…
A mount for a Garmin Varia radar to a saddle bag. I added a slot under the Garmin mount plate for a wire tie around the whole thing to make it extra secure. The downside is that you need longer screws than the ones that come with the…
A stegosaurus themed holder for chips, street tacos, quesadillas — whatever!
Useful if you need to mount two accessories onto one dovetail saddle onto your telescope. https://a360.co/3a6fCNv fusion 360 model
Used for hanging piping from rafters, joists, walls, etc. I needed this for hanging a section of PVC pipe from a ceiling joist to hang my filament spools. Worked like a charm. Instructions This Thing is fully parametric. Download the SCAD…
Printed with 3+ perimeters for strength (.4mm or .6mm). PETG is ideal for being robust. Remove receiver pins x 2, and replace with #10-32 x 1-¾" bolts using slim nyloc washers on the back. Good retention for 3" 00 shells and others of…
Ruger Mark IV Barrel Shroud That Adds 1913 Picatinny Rail In The 6 O'clock Position For Adding Lights And Lasers.
This is a remix of an existing airtag bike saddle mount which, in its original configuration, did not fit my Selle Royale Essenza Plus saddle. I really simply modified the model to fit the spacing of the saddle, but also to even get the…
This is an almost completed saddle room for children's plays. The door and hatch for pets are not modeled. The owner of this stable is Veera, and if you want another name carved on the front wall, send a message. Edit: A blank version of…
![Wall,- & Skadisadapter [for original MK4 Spoolholder]](https://media.printables.com/media/prints/640120/images/5057256_ce966b84-277c-4721-a651-1a6f17dddb06_fb481eb2-9f51-47c3-8ebe-cc7b581b2b3e/img_20231107_171808.jpg)
