5,070 models
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
'Safe from the Rain' is a string artwork with a space under the umbrella to slot a figurine of your choice. It prints without supports Print at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne. You can…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA. NEW VERSION IMPROVEMENTS: LOCKER KEY FOR EXTRA SECURITY. NO THREADS (sand gets stuck and blocks them sometimes) BETTER AIRTAG LOCKING CAP PRINT IN PLACE STRONGER…
Print approx. €16.25–€19.87 excl. taxPreliminary estimate for PETGSource material: PET
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
Print approx. €18.96–€23.17 excl. taxPreliminary estimate for one variant
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Tired of people guessing their gifts? Just a fan of hiding things in books? This easy print is for you. Display it on your bookshelf or wrap it and gift it. Features: Print in place Live hinge Color change possible Built in clasp for…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
This is a remix of Combination Safe by ChuTec_Engineering_Solutions ( https://www.thingiverse.com/thing:1939676 ). I liked the idea of the combination lock. But the box itself looked too much as a toy, too much simple. So I created my own…
Print approx. €38.33–€46.84 excl. taxPreliminary estimate for one variant
Modified commercial child lock. With sophisticated locking system, which is harder to open for children. There are 2 versions of lock: Print only with mounting with glue or double tape (weaker one) Stronger version with need of M3 screws.…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
Uploaded the G-Code as well for the prusa mini+ with painted on supports. Supports are needed!
Print approx. €10.42–€12.74 excl. taxPreliminary estimate for one variant
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
🐘 Abstract Minimal Animals – Wild Safari Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Lion, Elephant, Giraffe, and Zebra. The models are intentionally highly…
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a hornet trap that you can screw on a "Bonne Maman 370gr" glass container to trap hornets. (It fits on mostly every brand like Aldi, AH, Carrefour, …) You can place this model on its side as advised by a beekeeper. This way bees…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Simple Apple MagSafe + Apple Watch wall mount case for 3 countersunk screws. Large enough for an iPhone 14 Pro MAX. Note: Check out this new model too: Charging butler / iPhone + Watch + AirPods Pro wall mount charger Mounting the parts:…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
A sign I created with the 4 cardinal rules of firearm safety. Can pause the print midway for color change or print using the gcode provided. Fits the Prusa Mk3 print bed.
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
Secret safe key compartment for under desk with mounting holes. I made it, because I could not find a compartment which fits my safe key. Also I wanted to tinker around with Fusion 360. So, here it is. My very first own designed 3d print.…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
My generic step-down transformer from 220v to 110v has a front output that is just taped off. I wanted a more reselient and permanent solution - so this is it. You can, like I did, put a dollop of two-part epoxy glue to the middle of the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Update 1 - 08/30/2022 I have modified the discs a bit so that a little tolerance is allowed when entering the combination. Update 2 - 11/05/2022 I added the missing disc_2.stl If you like this model, feel free to check out my others here .
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This print turns a mason jar into a watering station for bees, or if it is legal in your area an open feeding station. You need to print 1 base and 8 of the grid pieces. The grid pieces are sized such that the bees can't get into the…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
II found the Dino Balance Game to be intriguing, but my youngsters prefer safari animals over dinosaurs. That's why I chose to create this version instead. I plan to add more animals gradually to enhance the game further over time. I…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant
Designed for MagSafe with USB-C plug (Apple MHXH3ZM/A) Designed specifically for the Volvo C30, S40, and V50. My 3D printed MagSafe vent mount offers a perfect blend of form and function. Engineered for MagSafe technology, your iPhone 12…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank. My contribution is just to have modified the model to add a slot on one side. So there are 6 different…
Print approx. €8.78–€10.73 excl. taxPreliminary estimate for one variant
I recommend printing the Base with 100% infill for more weight. Perfect as a Phone Holder in your Workshop, Kitchen, Bathroom or Bedside Table.
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
This is a solid version of the Safe T Bagel to speed up print times. The webbing included in the original Safe T Bagel forces the slicer to print a lot of perimeters. This version is solid - allowing the slicer to optimize printing. I…
Print approx. €8.39–€10.25 excl. taxPreliminary estimate for PETGSource material: PET
With Mac OS Ventura and iOS 16 now released, one can now use your iPhone as a far superior web cam for your MacBook. I challenged myself to design and print an iPhone adapter instead of ordering the Belkin adapter. Did some research,…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
This design reproduces the tire rim and rim keeper for the Playmobil Safari set Jeep. This play set was released in the late 1980s I think. If your kids have the jeep and a missing or broken wheel, this may do the trick for getting your…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
Wall Art silhouette model of the Posche 911 Safari. Adjustable size. I accept model suggestions or ideas you might have
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
The clasp has two parts that connect with a light press fit. If there is a pull on the necklace, the clasp should open. Tie a knot at the end of the thread after inserting it into the clasp. Note that if the necklace is inadvertently…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
MagSafe Charging Station – Put Your Phone to Sleep in Style! Product Description: Introducing the Phone Bed , a charming and functional MagSafe charging station designed to give your phone a restful “sleep” as you recharge overnight. This…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Power tool safety switch lock Lost a couple of the original ones and was just swapping as i needed the tools. Decided to just make my own. I used PETG .4 nozzle .15 resolution suggested (ok with .2) Supports in file (painted on) Brim not…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Prevents the original VW T6 bike rack from hinging down inadvertently.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Need a place to store your ring safely while you're out climbing, trail running, surfing, swimming, or hiking? Drop your ring in one of these little ring safes, press and twist the cap into place, and clip it to a locking carabiner, and…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This Apple MagSafe to Quadlock dock allows to dock an iPhone 12 or 13 to a male Quadlock support such as the one used on the Cowboy bike. It is compatible with the wireless charging capability of the Cowboy bike. The dock requires to use…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
holder for popsocket which allows the use of magsafe accessories I used magnets from an unbranded non-functional magsafe charger
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Safety cover for M22 Eaton box. I printed from ASA and the strength is great. It is equal to the original.
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
I needed a MagSafe mount for my LG 4K 27in and found the Customizable MagSafe Continuity Camera Mount design by jadam . The monitor clip didn't quite fit, so I threw together a quick remix. All parts have been parametrically redesigned in…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
This is a Choking hazard tester as described by CPSC (Consumer Product Safety Commission) at https://www.cpsc.gov/Business--Manufacturing/Business-Education/Business-Guidance/Small-Parts-for-Toys-and-Childrens-Products The purpose of this…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
This model is designed to work with this 3rd party charger: https://geni.us/MagSafeWirelessCharger Please do ‘like’ this project - it helps me out at no cost to yourself. Thank you. Supports are required to print it, I highly recommend…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant
Apple MagSafe charging stand, useful when the power outlet is away from any table, desk or other usable surfaces.
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
I remixed it to fit the monitor shelf of my IKEA UTVISNING desk. The monitor shelf is about 22.3mm thick and the remixed model has a gap of 22.2mm. I removed the screws from the model because it fits the shelf very well. This remixed…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Uses a standard 56 MM diameter MagSafe charge “puck' and the standard Apple Watch charge ”puck". Has a takeup spool for long wires and a relief for the camera “bump”. Printed here in PolyTerra PLA at 0.3 later height (no support) This…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Convertor from Glock 17 to Glock 19 Safariland 6354 (with Surefire X300). Made primary for airsoft holster copy from Wosport, but usage better with 9mm (the "pin" diameter is 7,7 mm - same as airsoft copy btw). Thanks to this piece, it…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
add something later here =)
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
If you have the Playmobil Safari Jeep, you may need the spare gas can - aka jerry can. This is an easy print. I printed it 4 walls at the finest resolution for toughness, and lightning infill because it's strong enough.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
This iPhone Magsafe holder is simply plugged onto the Mac. Now you can easily dock your iPhone and use it as a webcam. Since iOS16 and MacOS Ventura there is a new Feature, named Continuity Camera, to use the iPhone camera as a webcam for…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
NOTE (Nov. 1, 2023) : See improved versions here : https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage This “safety cover” is for the model 953EV-P2 Chamberlain 3-button remote control for garage…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
This is a safety collector for snap-off blades. To use it move the blade so that the line you want to snap aligns with the outlet of the handle (see picture left). Then insert the blade into the upper lip of the bottle up to the same line…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
havent found any watertight 230V socket cover so “fusioned” one myself, its simple model with groove for “O” ring (choose one according your inner socket diameter), ive greased it a bit Need one to feel better while my kid uses water gun…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 15% infill.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
The MagSafe Compatible iPhone Stand is a practical and versatile 3D printable design tailored for users eager to fully experience the new StandBy mode in iOS 17 while keeping their device charged using Apple's original MagSafe accessory.…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
Here's a spare tire for your Playmobil Safari jeep. Long ago I designed the rim. Now here's the spare tire (TPU). This is a hollow tire, with side walls, designed to be installed onto the rim (copy provided). Once your tire is printed,…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Quick and easy print! >> No supports needed << Used to hang 3M safety glasses Mounts with small M3 screw to HSW Watch this video for more informations: https://www.tiktok.com/t/ZGewcvoNb/…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Trezor Safe 3 Stand Enhance your workspace with this minimalist stand designed specifically for the Trezor Safe 3 hardware wallet. The stand provides a stable base, keeping your wallet easily accessible and stylishly displayed. You can…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Designed to fit safariland holsters and belt spades. There are three versions depending on your needs. V1 is just a straight piece that will fit on my Prusa Mini diagonally across the plate. V2 has two 25 degree angles and is more useful…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Introduction This solar viewer projects the image of the sun onto a screen so that it can be viewed safely. At other times you can use this viewer to study sunspot activity. There are a couple of other designs online, but this design has…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET
Do you need a portable & rechargeable 5-12V solution to power your projects? Simply add a 28-29mm (1-1/8") hole into your application & insert this power carrier design. The self-retention clips will secure it in place against a panel.…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant
This mount allows you to keep your HOTA D6 battery charger attached to your Bat-Safe securely. I fly RC planes and take the Bat-Safe full of batteries to the club field with me, and this makes it simple to carry and move around without…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
My EGO lawn mower has 2 self-propel buttons that are way too easy to "trigger" when pivoting the lawn mower. Creature of habit that I am, I always turn/pivot the lawn mower using my right hand. On numerous occasions I have hit the…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This was fun. I wanted to figure out how to use Fusion 360 model to “mold” to a specific shape, also designed in F360. This adapter lets you drop your AirPods 2 onto a MagSafe charger without messing around with alignment. You can see the…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant
Epico MagSafe size : 58 x 7 mm Support : yes
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Easy to paint in your slicer for printing with mmu3 / ams like systems.
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
As you can probably garner by the name, this is a very inspired MagSafe charging cube. But I'm cheap and wanted a bit of a reason to learn proper modeling techniques. It is split into 3 printed parts for both ease of replacing something…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
This 3D-printed mount is specifically designed to securely hold the Apple MagSafe Charger on Dell monitors. It provides an elegant and practical integration of your iPhone into your workspace setup. Features: Compatible with Apple MagSafe…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
For safety measures we are obliged to secure certain machines from use by unauthorised users. Machines with a safety switch have a location to place a lock on, this safety lockout does the same for devices with just a regular plug on it.…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
Length adapter to use a Uni-ball UMR-87E refill (Signo 207/307) into a Lamy Safari rollerball. Printed with PLA, 0.4mm nozzle, 0.2 layer height, 2 outer walls, 2 top and bottom layers, on Ender V3 SE.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Description Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment,…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
Smartphone cameras, regardless of manufacturer, have security issues where the cameras can be accessed by hackers without knowledge which obviously has major privacy issues. This Privacy Lens Cover [PLC] design helps by covering the main…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Overview This custom-designed charging dock combines function and minimalist aesthetics, tailored specifically for Apple MagSafe-compatible iPhones and the Garmin Fenix 7/8 smartwatch. The dock consists of two interlocking base…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
Hello, Today I have a Safety Object Grasper for you. It is suitable if you want to move an object without contamination. Your hands are clean , and the object is moved. For proper functionality, you need to use a Printing Profile! I used…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Razor blades, and children are a bad... Now i am using this to prevent fingers in the baldes. Easy to remove when you need it..
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
2 lids. Best to print them “standing up” to maximize strength in the tabs.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
I have modelled a replacement battery cover for a Delphin Forza Safe fish signalizer for my friend. Maybe someone will find it useful. I am also attaching a link to Tinkercad if anyone would like to modify this model:…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Overview VersaFrame is a modular photo frame system designed for life's ever-changing moments. Whether displayed in portrait or landscape orientation, the VersaFrame adapts with ease. The Standard Edition comes with a clean, minimalist…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets! Pictures at 100% and 25% scaled. Print instructions: Printable in PLA; For best results use…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Replacement. Safety support for gas spring. Supports Norse Camp - Romsdalen 2.0 rooftop tent, and possible others. Print settings: 0.15mm Structural Material: PETG 0.4 nozzle
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
This stand for your Iphone is a luxery one so your Iphone can function as a night-alarm clock, or during the day on your desk. You can use it with or without a (book)case. In case you have a book-case, it can fold on the top over the…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
VersaFrame - MOM Heart Stand Edition Celebrate Mom with this heartfelt base for your VersaFrame modular photo frame system. The MOM Heart Stand Edition features bold serif lettering with a cutout heart in place of the "O" — a perfect…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
This is a super simple to print charging stand that utilizes your MagSafe charger. No supports required, and fully modular to fit your phone (as long as it has MagSafe). Update 8/5/23: Support for older style Apple Watch chargers! I have…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
Attach your iPhone to any desk or shelves with this dock made for the Apple Magsafe charger. Idea It's perfect for the upcoming StandBy mode for iOS. I had the idea for this model when I saw the last Keynote, I wanted my phone floating…
Galaxy S24, S24 Plus, FE and Ultra cases, to be printed in TPU of your choice. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. edit on 12 Oct 2024: Added Galaxy S24 FE case. Added…
