Counting matching models…
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
I used Prusament PLA Prusa Galaxy Black for printing. It would be nice to use a different color for each part of the ashtray. width: 100mm height: 120mm
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Diameter about 10cm! No support needed. I recommend a brim…
ashtray for iqos all models. Popelník pro iqos
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Portable Ashtray No supports PETG / ABS / ASA 68mm height
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is an enclosure to keep a RAK Wireless RAK19003 base and its RAK4630 LoRa module on the back of a Magsafe compatible phone for use with Meshtastic. It adds about 16mm to the total thickness of the phone. It can also be stuck to flat…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
High quality scanned souvenir skull ashtray
Just place a beer bottle cap in the middle where you can put out the cigarette. In der Mitte einfach einen Kronkorken platzieren um die Zigarette auszudrücken.
Update 08.05.2020: we used the motor: https://hobbyking.com/de_de/propdrive-v2-series-4248-650kv-brushless-outrunner-motor.html?queryID=821f8e5965ad229ef4e011a419d1228a&objectID=59142&indexName=hbk_live_magento_de_de_products ESC: 70 amp…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
Case with battery
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Lockable ashtray for heated cigarettes.
I made this ashtray for my Friend who loves Porsches. All the parts do fit on a standard 220mm build plate but I recommend printing the lid separately and with a raft to avoid warping. The wheels and body support M4 bolts and inserts (I…
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Please respect the Creative Commons license restrictions I have chosen…
Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
- NO SUPPORTS NEEDED. Print as is (Thank you Alley Cat)!! - (2) M3 x 6mm Socket Head Cap Screws (BATTERY I USED) 504050 - 1500mah https://www.ebay.com/itm/387026120507 (GPS I USED) https://www.amazon.com/gp/product/B09LQDG1HY/ (ANTENNA I…
This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug. I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for…
Introduction Meshtastic is an up-and-coming inexpensive off-grid communications platform using LoRa, long-range radio protocol. You can think of it as text messaging through Walkie Talkies but with more capabilities such as encryption and…
Wie der Name schon sagt habe ich einen Aschenbecher designt. Da ich nie einen für meine Gäste zu verfügung habe und jedes mal einen aus Alufolie basteln muss :D Now in English As the name suggests, I designed an ashtray. Since I never…
Simple case for a Vision Master E290 that fits a 3000mAh and the new variation of the buttons which are now on the back, folding antenna that allows all possible positions. There's space to add a gps and buzzer but I'm still working on…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Ashtray with a logo. Harley Davidson. Colorchange if you want it original.
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
I took Fotis Mint’s Nazgûl model and resized it, cut out the sword and a cylinder down into it to hold a pen. I have that model uploaded as well. Then I took the one ring and sized it up. Added a floor and dropped in the Nazgûl figures. I…
This is a water resistant outdoor enclosure designed around a 3 watt solar panel. It was designed with Meshtastic in mind but it can be used for any solar project. --- Buy it fully assembled and ready to extend your mesh network :…
Remember to hit LIKE on my design if you download it so I get credit, thanks! Yet another cigar ashtray! Check out all my ashtrays: https://www.printables.com/@geokscott/collections/1050149
Oriental styled ashtray with optional rain cover lid. Print without supports! Turn off “ensure vertical thickness” to save on filament.
I wanted a case for my Heltec V3 that would be suited to carrying in a pocket or sitting on a desk while having a good battery life. This case is designed to be long in order to have the Heltec and 18650 end to end instead of stacked. I…
Made this for my car to store my used heets. It fints in the cup holder.
I wanted a simple design that I could cast easily in concrete. this is what I came up with. I might have to modify slightly to increase the thickness of the bottom. We'll see. I'll cast another one and test the strength and get back to…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
A sliding ashtray for cigar smokers inspired by an existing design with a beautiful cubatabacco logo on the front. The ashtray allows you to let the cigar rest and also catch the ash while it rests. Its not designed as a pocket ashtray,…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
I added a V4 that has small mounting pads to stick the GPS and Bluetooth antennae in case there are no enclosure walls within reach, or if you just wanted to keep it self contained and compact. meshtastic.org Case and setup inspired by:…
18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case. 18650 Li-Ion battery holder included (for longer protected 18650 battery). I recomend connect some high-gain antenna (some better and bigger than stock one…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
Let me introduce you to my custom-designed enclosure for the Heltec Wireless Paper. This enclosure is versatile, accommodating larger batteries, and features a simple button design on its side for easy operation. Hardware: - Heltec…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
0.2mm layer, 3 walls, 15% infill thread opening printed with overhang supports
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
Ashtray slider BMW E46 for bmw
This case was designed to hold a Heltec V3 lora board and a MakerFocus 3000 mAh 1S lipo to be used with the Meshtastic node network. It is slim and easy to carry in your pocket and with a large battery should last a long time between…
Printing/printed this? I'd like to hear from you! Seriously! Message me on my discord / telegram /printables! 20240611: New V3 version! Many great changes: Better button protection, no more accidental presses Better back design, locks-in…
Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
UPDATE: I created a new Meshtastic solar repeater node. There's nothing wrong or bad about this 6W version, it works great. However, I consider the new version to be the ideal Meshtastic solar base station when balancing uptime with size,…
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
A heltec case designed to be small but have a bit more of a useable battery tray. Visit us: Gendemik.co.uk Newer stl files can be obtained at the link above. Tried and tested as a daily driver and used by a few of the UK NW meshtastic…
Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…
Redesigned for a friend of mine who wanted this with an ashtray for 4 cigars. Simple edit. Enjoy! Category: Interactive Art
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
Je to můj první modlel, tak prosím o schovívavost :D Jedna verze je s dírama, druhá bez. Tiskl jsem to na PRUSA MK3S+ a MINI+. Z matného černého PET-G. Pokud máte funkční, správně seřízenou tiskárnu, tak se vám ani moc nezbortí převisy :D…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
General Information I printed it on my BambuLab P1P using AMS. If you don't have multicolour printing, you can swap colours at 2.6-3.0mm layer height. Material I've used ASA and ABS, we've tried it with some cigarrettes and it didn't melt.
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
Ashtray sustained by a hand with a base, two pieces, no suports needed, printable in PLA/ABS with a minimum 25% infill
A remix of J4nm4Nn Ashtray with a slight draft and chamfer here and there. Main reason for the remix was to add text to the bowl. Fusion files are included in case you want to edit the text or number of cigars supported. The last sketch…
Symbol cannabis for use ashtray or decor, very nice
I printed from 0.75 PLA, but maybe it's better to print from ABS or ASA. 50% infill no support 0.4 nozzle 0.2 wall height with 2 lines
Easy and simple stoner's ashtray. For tobacco use only.
The enclosure is designed for the Heltec V3 or Heltec Tracker. The bottom part of the enclosure is common to both variants. The enclosure is sufficiently dimensioned for a 26650 battery. Both parts hold together by self-clamping.…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
no supports, nozzle diameter 0,4mm, layer height 0,2mm, perimeter 2
