Counting matching models…
This is a Shulker Box from Minecraft , albeit only 75mm cubed rather than 1m cubed =) The dimensions are accurate and the pitch of the thread rises the box accurately too: 50% of the height of the box per revolution, just like in…
Designed to be used with #8 button head wood screws. Corner screws are hidden in a keyhole slot. 4 perimeters and 25% are recommended, support needed for the keyhole slots.
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
Simple shulker box i made to store my fidgets in. I liked mkoistinen shulker box and wanted to have something that can hold more things inside so i made this. It may not screw open but still looks like a shulker box. I printed mine scaled…
Ikea Raskog Organization Collection Compatible with the Ikea Skadis pegboard using the “universal hook” from this set (not mine). We have several Ikea Raskog project carts at our house and lately I've been using one as an end table. I use…
hello 3dp bros it's just a shulker box but I think I got a pretty good mix of full functionality and aesthetics! Important - Fresh/Live Shulkers open differently from Box Shulkers. Box shulkers rotate through the entire duration of the…
Print 4 with at least 20% infill to be strength enough. I used some hot glue to ensure the shelf don't slip from the feets. **Added a new version with an hidden screw as suggested on comments. It is placed on the hole of the feet and…
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
Description: This is a 3D printed model featuring a bust of Lord Shiva, accompanied by an intricately designed Om (ॐ) symbol with a Trishul (trident) and Lingam arc. The model was created using Fusion 360 and embodies the spiritual…
Hindu Trishul (Trident) for Dummy 13 in the style that is typically wielded by Hindu gods and goddesses. Layer Height: 0.2mm Start with Gold At Layer 15 Change to Red (3.0mm)
I needed a front clip for my shelf, that let me loading by the top It includes a thread at the bottom to fit a PC-4 M10 PTFE Coupler Single and MM version (with numbers 1 to 5) Thanks to the creator of the spool holder, it's an amazing…
This is a stand based on SungiKim's version, but this one fits the bergshult IKEA shelf (20cm deep). I made this version for the 80x20x2.5cm shelf, but it would certainly fit the 120x20x2.5cm - although you might need to print an…
Modified jerrinjms' "Monitor Stand For Ikea BURHULT" to fit the Ikea BERGSHULT. Category: Office
I will be using it with a 32" curved Samsung monitor so the 20cm version of the shelf would have been too shallow for the monitor's stand. The leg ends up being 27.5cm in the long direction so you'll need a large print bed in order to…
I did not have any transparent filament, so would work better that the one in the photo, so I would suggest you print in white or transparent filament. I also did not have enough LEDs at the moment to test, but i think you could have fun…
It's a Really long(like abt 1 ft i think) keychain. It looks really cool in cad. ASSEMBLY: Basically, u print all 5 parts. Then, insert the blade into the side of the staff closer to the rectange outcrop. Then, insert the pomel in the…
I modified the genious Oculus Quest 2 Wall Mount from Tony Youngblood to be hang from an Ikea Bergshult shelf as I don't like to drill into the wall. Quoting from his design: The lenses face down so dust won't fall on them. The…
Simple model designed for quick or color print. No support is needed! :). There are two versions, the first is just a figure, and the second one has a little hang for easy attachment to your keys! Printing setting: 0.4mm nozzle is enough…
For strength, I recommend printing this on its side so the layer lines are parallel to the axis of symmetry. I made the original a couple of years ago because we have a small bathroom and there was no other place to put the speaker! The…
the shulker box of minecraft Hope you like it
This is a strudy shelving bracket inspired by the Ikea SANDSHULT. It does not include their metal hardware so it cannot handle the same load!
I was looking for an easy to print and elegant way to have my monitor in a stand. After finding this model I decided to make some modifications to match my setup. I hope you like it. It was printed in Prusament Recycled PETG.
Use marks on the side to find holes positions before drilling. The same template can be used on long and short side. Just align one hole with the pre-drilled and then you know where to create the other one.
It's a resealable Minecraft tissue box - Shulker Box. Je to uzavíratelný box na kapesníky Minecraft - Shulker Box.
Slides over the wall mount to provide a secure hanging.
Designed a small hook for the IKEA RASHULT cart. The hook snaps over the metal lip on each shelf to form a secure connection. Attached pictures demonstrate how it attaches. I have also attached the .step file so other can remix. Print…
Hello everyone, I want to share with you my baseplates for the ikea ekby alex / ramshult shelve. It fits the shelve pretty tightly. It fits my portemonnaie, my car keys, room keys, some money and my running stuff and keeps it neatly…
Beschreibung Erweiterung für IKEA-Servierwagen (RÅSHULT, RÅSKOG) zur praktischen Aufbewahrung von Stifteboxen von Action (z. B. Twinmarker, Aquamarker). Es sind zwei verschiedene Größen enthalten. Tipps zur Befestigung Ziehen Sie die…
Clip on hook for any 25mm shelf. Designed specifically for the Ikea Bergshult
Wanted to organize my IKEA RÅSHULT with Gridfinity but wasn't able to find matching Plates, so I designed them. They're cut in a way, that they can easily be glued together and with some spacing in mind to ensure, it fits even if it's…
A minecraft Shulker Box made by me! Can be used to store items, as a toy or as a decoration
Um auch mobil Skadis zu nutzen habe ich 2 Skadis-Platten an einem Servierwagen (Rashult 204.630.56) mit 2 Skadis (103.207.89) befestigt und oben 2 Verbindungsstücke mit PETG ausgedruckt, damit alles richtig festhält. Ziehen Sie einfach…
I wanted to extend my IKEA RÅSHULT furniture by hanging a PLUGGHÅST from it's side. There are no hooks, so I made some. Successfully printed in PLA on a Prusa i3 MK3S+
an IV Bag holder for IKEA shelf but should work for any shelf width of 25mm. My cat requires liquid IV for his kidneys every few days so I was looking for a solution that will let me keep him on my work table while I work so I can keep an…
Small, easy to print hook for Ikea GRANHULT / BERGSULT shelf bracket :-) Printed from PLA, Layer 0.2
Two sides of a kitchen roll holder, that can be easily mounted on the IKEA Sandshult shelf bracket , to hold a 22mm diameter wooden pole about 55cm in length. Printed in two pieces each side to avoid overhangs, which can then be…
Simple drilling template for IKEA BERGSHULT / SANDSHULT to align two shelves using two 6mm wooden dowel.
Tisk z PLA 210/60 bez podpor na šířku 15%vyplň
I printed this with the magsafe face down on my print bed, it has a bit of stringieness from bridging the gap but all of that is under the magsafe when mounted and the magsafe still has a sturdy connection within the print. Great if you…
A simple hook that can be attached below a Pershult bracket from IKEA.
I bought the Skullshaver Beast Clipper Pro and found that all the accessories were just lying around causing a mess. Designed this little organiser so at least now it looks neat and less chance of me losing anything.
A little clip-on hook to hang items from the bottom of an Ikea BERGSHULT / PERSHULT shelf. Print in PETG for best results.
To prevent spills falling out of the Skeppshult pepper (casting iron, ceramic and beech tree) mill you may need this coaster to keep dinner table clean. This protection will be keeping attached to the mill when you pick it up. Just remove…
Print four of these and mirror appropriately. This version fits the IKEA RASHULT mobile cart. Thanks Glashata!
Small Minecraft Shulker build with a mechanical switch to make a satisfying click sound :) Instructions: To build the Shulker, you need to print a top and a bottom half, plus the keychain part if desired. I used basic PLA with 0.08 mm…
IKEA SANDSHULT Bracket Hook
The IKEA PERSHULT brackets are designed so that two brackets can be mounted in tandem to create multiple shelves. However when using only a single bracket, the space left on the underside of the bracket to allow for this stacking means…
SVENSHULT 3d printed hook for organising
The revised task card holder is angled to hold the task cards better in place. It's currently designed to use 8mm x 2mm magnets. In the future I will design other useful components for those that have similar shelves in their office. The…
This is a very simple shelf meant to hold my “gaming” keyboard when I'm not using it. I normally use a DracuLad when not playing games, but when playing games it can be a hassle, especially since I use the Colemak-DH layout. I needed a…
Parts for assembling the holder using IKEA SANDSHULT bracket. The holder has a front and a rear part for attaching a 25mm diameter rod (broom handle). The models include left and right sides, and possibly a centre pass-through part. The…
I've had those two brackets laying around so I gave em sth to do. As of the tubing I've used offcuts with 25mm outer diameter from Globus (German Bigbox Store) The shelf is this one
update. apparently there's 2 different sizes of this shelf mount (depending on age of purchase) so i have added a second size.
Radiator Cover Hooks for IKEA BERGSHULT Simple 3D-printable radiator hooks for mounting an IKEA BERGSHULT wooden shelf/board above a radiator that requires no screws . The hooks are designed to slide between the wall and the radiator .…
This coupler will let you connect IKEA Bergshult shelves end-to-end without any gaps or end-grain showing. It's 20mm wide and has a 5mm central bar and it reflects the edge-trim of the shelf so as to be as unobtrusive as possible. You…
Заглушка в стойку седла велосипеда Shulz. 💥Все наши контакты на одной странице: https://hipolink.me/prosmp Канал на YouTube: https://www.youtube.com/@prosmp Наш канал в Telegram: https://t.me/prosmp Группа Вконтакте:…
This is a Riser Stand for the Ikea Bergshult Boards. They consist of the Legs, with a 10mm Hex Grid for adding some accessories.
I loved the Multiboard mount made by @BrettHampton_325208 for Ikea RÅSKOG and RÅSHULT utility carts, but I found the regular snaps used in the original model to be a bit too loose for my taste. With this remix the boards stay on tight…
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
This is a strudy shelving bracket inspired by the Ikea SANDSHULT. It does not include their metal hardware so it cannot handle the same load!
Clip on hook for any 25mm shelf. Designed specifically for the Ikea Bergshult
Purpose This 3D-printed component serves as a reliable replacement for the original welded folding bike stand support. The original design, welded directly to the bicycle frame, was prone to breaking under stress, especially from…
Задний багажник для велосипеда Shulz Hopper 3 mini. Для крепления нужны 8 винтов М5х20мм, 2 винта М5х12, 6 самоконтрящихся шайб М5, 4 шайбы М5. Удобнее сначала закрепить верхнюю часть, потом крепить боковые. Двумя винтами М5х12 боковые…
Ikea RÅSHULT Utility cart screwdriver holder. Two models are included, one with two small holes suitable for phillips and small blade screwdrivers, the other model has one larger hole to accomodate a larger plade screwdriver. 15% infill,…
We've repurposed an Ikea SVENSHULT as a coat rack. Apart from using normal coat hanger I wanted a couple of hooks to hang smaller things on. These hangers clip onto the wires of the svenshult. I printed them in PETG with 3 walls and no…
Designed a tool organizer for the IKEA RASHULT cart. The hook snaps over the metal lip on each shelf to form a secure connection. Attached pictures demonstrate how it attaches. I have also attached the .step file so others can remix.…
Simple hanger to attach Skadis pegboard to the side of Rashult cart. To stop rattling you still need to use zip ties at the bottom (for now). To attach it slide it on the metal basket from the side, where the rim is thinner.
I recommend printing the body from Prusament ASA Natural. You can achieve a great “ceramic” surface by smoothing the model. Article about smoothing can be found here:…
Organize with IKEA SKÅDIS Holder on RÅSHULT: Materials Needed: 3 M3 nuts or M4 nuts 3 M3 * 50mm or M4 * 50mm screws 2 3d printed parts Instructions: Prepare Your Materials: Gather 3 M3 nuts, 3 M3 * 50mm screws, and the two 3d printed…
Thanks to Jonathan from Keep Making for designing this system. I use a RÅSKOG Utility cart from Ikea for my mobile soldering station. The baskets are perfect for holding all the other stuff I use for my projects. I wanted a way to hang…
This is my take on replicating the IKEA RAMSHULT bracket. This model might be slightly different from actual IKEA bracket as I modeled it without having the actual bracket, I made it by looking on picture of it online. Should be the same…
This is a 3D printed model of a spiritual symbol combining the Om (ॐ) symbol with a Trishul (trident) and Lingam design, created using Fusion 360. The design intricately merges these significant elements of Hindu symbolism into a cohesive…
