Counting matching models…
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
This is a cassette which can make polaroid spectra system to use the 600/itype/sx-70 films here's the assemble tutorial link https://youtu.be/32-6VSvLuo0 ****WARNING: WELDING PROCESS MAY HURT YOU !!! BE CAREFUL !!! **** AND HERE IS THE…
This is a remix of Cmdr_Falken's design ( https://www.thingiverse.com/thing:4393430 ). Huge thank you to the original design! I decided to break the original design into three rather than two pieces, reducing the need for supports. The…
Introducing the Polaroid 600 film to Spectra adapter, a functional 3D-printed model that enables the use of Polaroid 600 film with Spectra cameras. This adapter provides an exciting opportunity to experiment with 600 film formats on…
Follow assembly instructions from original design. Everything is the same except for the slight change to suit the new bottle and body shape. Supports up to 10mm x 3mm round magnets. Note that the updated design means the insert and mount…
Man, I just missed the Instant Camera Accessories contest. I didn't even know it existed until now. Showcase video: I haven't tested if this fixes the spread issue that happens when the film is all the way to the left ('cuz of money) and…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
You'll need: 6x Hex-Nut 3mm 6x M3x12mm Screw
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
A Spectra S1+ pump bottle holder, with no fixtures required. I suggesting printing in PLA with 0.16 or lower layer height to ensure the threads print correctly. Print upside down with thin tree supports for 20 degree overhang. 20% infill…
Replacement for main pivot bolt cap. Needed this when my main pivot bolt worked its way loose and punched open the original. Print Settings Supports: Yes Category: Replacement Parts
This is a remix of a spectra bottle holder that interfaces with a spectra breast pump with friction. I found the original model provided a firm and snug fit but we wanted to add an extra cup to hold some pumping spray. I also removed the…
I added a hose spool to zeb's excellent Spectra S1 Plus two bottle adapter to allow for cleaner carrying and storage. This bottle adapter has the flat side for Spectra's re-design. The print pictures was printed in Soleyin PETG with 15%…
This is a parametric case for the WaveShare 13.3"E e-ink Spectra panel. The STL files have case depths of 6mm (pictured), 8mm, 10mm, 16mm and 24mm. I've also included options for both vertical and horizontal printing. Do not use any…
This is a parametric case for the WaveShare 7.3"E e-ink Spectra panel. The STL files have case depths of 6mm (pictured), 8mm, 10mm, 16mm and 24mm. I've also included options for both vertical and horizontal printing. Do not use any…
Features Low Profile: Thinner walls and a sleek front bezel for a modern look. Button-Free Sides: The side button cutouts have been removed for a cleaner, solid frame aesthetic. I made this specifically for my Tempest Weather dashboard ,…
Last weekend I unfortunately lost the chain guide of my Canyon Spectral CF (2022). So I took the opportunity to advance the color coordination on the bike and designed my own chain guide. The chain guide assumes that the old chain guide…
Design for Canyon Spectral:On, keeps the rear wheel in the air for an easy chain lubrification and gear tuning.
Unleash pure post-apocalyptic energy with this epic Skull Bus model! Designed for horror lovers, metalheads, and dark fantasy fans alike, this bus features a grotesquely detailed skull face on the front and dozens of skulls emerging from…
Canyon was sold out of their proprietary water bottle cage so I came up with a solution to use my YT Thirstmaster 5000 Bottle from my YT Izzo. I remixed this adapter from Bikernickmn: https://www.thingiverse.com/thing:6340762 I made it…
This simple bezel can be attached to your Pimoroni Inky Impression to centre the E Ink display so it looks more like a traditional picture frame. These files will fit the Spectra 6 versions of Inky Impression 7.3" and 13.3" (released…
Adapter to accommodate Fidlock Bottle holder on Canyon Spectral:ON Model year 2022+ proprietary bottle cage mount. With the option to mount a OneUp Pump or Both a OneUp Pump and Fidlock Bottle holder Base. It will work with the 600ml…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Fidlock bottle holder adapter for Canyon Spectral:on frame
Mount for Motorola Spectra 9000 (W9)Radio Head. Printed well out of PETG with supports under the inward pegs.
Spectral Wraith – Free FDM Fantasy Miniature A spectral wraith emerging from ancient ruins, surrounded by swirling supernatural energy. This miniature was designed as part of the Hollow Wing Forge – FDM Fantasy Minis collection, with the…
After printing there is no further assembly required! Fully parameterized
Používám, když vyjmu baterii z rámu kola a potřebuji ho otočit zpět na kola. Při vyjmuté baterii kryt zcela nedrží a „plandá“. Na delší převoz kola bez baterie doporučují použít díl Part for screws . Na kratší dobu, třeba při nabíjení,…
A tool to get the silicone cap off of the tubing port. Install the puller on the port before putting on the silicone cap and it'll pull off easily. Clips on to tubing for storage when not in use. Got the idea from swordfish45 but couldn't…
Remixed version to add a storage caddy for an extra bottle, parts, etc.
a cover for the rotating part of the LL300 spectra laser
Overview and Basic Info I wanted an E-Ink calendar display for my fridge so I made this. This model is designed for the Seeed Studio EE04 board, paired with either the 7.3" Spectra 6 raw panel, or the 7.5" monochrome raw panel (both…
This spacer replaces the factory one with a round one and allows the mount of common stems. I switched to a 35mm carbon bar and stem and wanted to have a solution that still looks oem. All factory hardware still in place, just switched…
A Spectra S1+ pump bottle holder to keep your bottles upright in the fridge, or to carry them around. I suggesting printing in PLA with 0.2mm or lower layer height. 6% TPMS-D infill works great. Two models are available, the only…
This model was derived from DavidMathis ' remix of SpyderDesign 's remix of Lived5733 's remix of Cmndr_Falken 's original. (hopefully that is everyone, lol) The family member I'm making it for wanted it to fit bigger bottles, so I…
It uses 2020 extrusion (in my case 100cm and 25cm) and 2 angle brackets for corners. Feel free to ask more questions. You can change the step file so it fits your glass thickness. Works really well, planty strong.
A container for spectral discharge tubes that holds six tubes that are approximately 26 cm long. The text on the lid is not part of the model, add that using your slicer if you want it.
This is a parametric case for the WaveShare 4.01"E e-ink Spectra panel. Do not use any supports as they will clog the kickstand. Printed with default settings (0.2mm layer, 0.4mm nozzle). The STL fits a raspberry pi zero with angled pin…
Case has front and back parts, 2 legs and 4 buttons that need to be printed. Buttons might need some post print sanding to make sure the clearances are big enough for the display board buttons to return secured with 4xM2.5 bolts to the…
Modeled this up for the ability to cap off either of the hoses. I was tired of having to pull out the tube and fiddle with the cap in the small space provided. This cap fits over the silicone tube, wraps around the backflow protector, and…
Case for ethernet controller(compatible with Spectranet) for ZX Spectrum(produced by Shama). It's looking good even with 0.3 Draft PETG preset. I'd prefer use petg for this print cause it works better with self-tapping screw. 100% infill…
I've made case for this item: https://www.bytedelight.com/?product=spectranet-internet-interface-without-case Print it in PETG for best results Cover present in two files that can be used for multimaterial print(even without MMU) or use…
Prototype repository of my current work on Polaroid Spectra cameras. You have the main files for tape cutting guides using a sharp razor blade and the extra folder which is just random Spectra parts I have been designing. I used Scotch…
Attached files give the shape of nine different three-dimensional bodies related to the Max-Cut optimization and graph theory problem. Also attached are nine files printing custom bases to hold each shape and label it. A writeup on the…
Quick assembly with hot glue and print with at least 20% infill with at least 3 walls. See support photo in orca. I made it a tight fit!
Thread with a layer height of 0.1 mm
This Spectral Ritual Vase is a dramatic gothic centerpiece wrapped in swirling spirits, ghostly figures and mystical occult-inspired details. The tall black vase creates a strong contrast with the flowing white and purple specters, while…
This is a simple wall photo “frame” for polaroid spectra photos. V2 have parallel 0 degrees photos one above another with simple storage behind the first photos V3 - was a bad idea V4 - is fixed v3, It have 10 degrees tilted photos.
👻 ¡La Colección Espectral Llega a tu Espacio! 🎃 Dale un toque divertido y terrorífico a tu día a día con nuestra nueva línea de modelos en 2 tamaños indispensables : Posavasos (Tamaño Grande): Protege tus superficies con estilo mientras…
I designed this fitting with the following goals: Easy to carry essential pump parts, and the parts should fit snugly/securely; Avoid dangling tubing whether or not the flange & bottle is in use (support mounting the back-flow protectors…
Thematic replacement for those tiny horizontal axis markers that you probably threw away by accident. I printed at 0.2mm layers and changed filament at layer 14 (I think). Happy Halloween. Boo.
For the make I've printed in my photos (and available as an option in my 3mf/gcode) I have created a 3-colour model using layer height changes. The primary colour takes up the majority, then I switched to a glow in the dark PLA for a…
A compact snap-fit enclosure for mounting a e-paper display to the Flipper Zero. Features a clean front bezel, rear access for wiring, and integrated lanyard loops for everyday carry. The case uses 4x 2.5mm screws and a custom blank pcb…
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
There is a new baby in my household (best 3D print my wife's ever done), and I am determined to improve how things work. My wife told me she was annoyed with her breast pump for two reasons: 1. The Spectra S1 Plus can only hold one bottle…
This model was derived from DavidMathis ' remix of SpyderDesign 's remix of Lived5733 's remix of Cmndr_Falken 's original. (hopefully that is everyone, lol) The family member I'm making it for wanted it to fit bigger bottles, so I…
Remixed version to add a storage caddy for an extra bottle, parts, etc.
I added a hose spool to zeb's excellent Spectra S1 Plus two bottle adapter to allow for cleaner carrying and storage. This bottle adapter has the flat side for Spectra's re-design. The print pictures was printed in Soleyin PETG with 15%…
Huge shoutout to @Thrasymack_136015 for the original inspiration for this. This organizer fits into the back of Spectra breast pumps to hold the two bottles and tubing. I updated this model to fit the newer, oblong style of bottles as the…
My wife was tired of having the hoses on her Spectra V2 portable breast pump (the with non-circular bottles/hole) flopping all over the place. I designed a minimalist way to help her organize them. It functions by simply press fitting…
Spectral Doorbell with ESP32 and Ultrasonic Sensor 🕷🎃 Want to surprise your guests with a spooky, original DIY Halloween idea? In this video, I’ll guide you step-by-step on how to create an interactive Halloween doorbell using an ESP32,…
Annoyingly using spectra breast pump one needs to pump into their spectra or compatible bottles. And even more annoyingly someone already made something similar half a decade ago and put a price on it… You know who you are and hope 18…
This playful specter drifts from door to door in search of treats! Cloaked in a tattered sheet with ragged edges, our ghost sports a pointy witch hat and carries a grinning pumpkin bucket—perfect for spellbound trick‑or‑treaters,…
The Spectral Undercroft decorative helmet to be printed in 2 parts. Below are the printing parameters. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint La cripta…
Replacement reinforced motor cover for canyon spectral onfly 2024
There is a new baby in my household (best 3D print my wife's ever done), and I am determined to improve how things work. My wife told me she was annoyed with her breast pump for two reasons: 1. The Spectra S1 Plus can only hold one bottle…
this model is the first draft for a multispectral camera for DJI Phantom 4. I haven't had a chance to test fit it yet as I made it for someone at work but hopefully will get some feed back on fitment when I get back to work. visually, it…
Bought a SVI-318 from eBay for my collection and it was missing the joystick. v2 has a smaller (more realistic) collar below the ball. Instructions Due to the item being top-heavy, I found it best to print with a 12mm skirt (touching the…
I wanted to mount the Thule Yelpp Mini Kids seat on my MTB, but the new Canyon Spectral G5 headset has a weird shape, and if you mount it directly to the fork stem it-self there is a collission with the seat and the cockpit itself.…
This is a simple holster that fits the Spectra S9 breast pump. It's symmetrical so not a 100% snug fit to the pump, so a rubber band might help if you are leaning over a lot. However, you can turn the pump backward within the holster to…
Vyrobil jsem tento rychle tisknutelný adaptér pro kovový držák na světlo LED Spectra. Adaptér se nijak nešroubuje.
If you’d like to say thank you, you can always buy me a coffee: buymeacoffee.com/the4n8 German: Gedruckt habe ich die Kabelkanäle mit meinem gemoddeten Anycubic Vyper mit weißem PLA. Es werden keine Stützstrukturen/Supports benötigt. Am…
Inspired by @Thrasymack_136015, I wanted a simplified single print solution to allow my wife to have two bottle holding capacity on her pump. She prefers the Ameda pump flanges that came from the hospital, which are directly compatible…
Huge shoutout to @Thrasymack_136015 for the original inspiration for this. This organizer fits into the back of Spectra breast pumps to hold the two bottles and tubing. I updated this model to fit the newer, oblong style of bottles as the…
