Counting matching models…
I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I wanted a better way to organize the spices in a cabinet but having it occupy a limited amount of space. I designed this pullout…
From the Minions Fandom Wiki: "The Minions are small, yellow, capsule shaped creatures, predominantly male, who have one or two eyes that were created by Eric Guillon. (...) They bring much of the comedy in the film, and they are known as…
I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I redesigned my original Spice Rack Pullout I designed this pullout spice rack to allow for one, two, or three pull out shelves for…
Height is specified in the print file title. The shelves interlock, as shown. 3in and 6in tall shelves are shown. cabinet is 20.5" wide. Shelves allow for storage underneath them for duplicate spices or anything really. Feel free to…
A simple spice rack for organising your spices. This could be mounted on cupboard doors or walls. Each can hold 5 spices. The design is compatible with spice containers of diameters up to 43mm (typical for Schwartz, Lidl, etc in the UK).…
A practical organizer designed for storing spice packets, baking ingredients, instant soups, and other small kitchen sachets. The angled compartments keep packets visible and easy to access while helping maintain a clean and organized…
The source marked this model as adult content.
This is a remix of another spice rack I found here; everything should be customizable by user parameters in Fusion 360. included stl files are for reference, adjust the sizes based on your hardware and space in Fusion 360 and export your…
(ENG) I present to you an organizer that is perfect for storing spices and other powders you use in the kitchen. The box has dimensions of 134x166.5x80 mm and features 3 separate compartments (PL) Przedstawiam wam organizer, który…
Modular Spice Rack! Select the width that fits your drawer, Slide it into place, and enjoy a draw that will always hold its shape! Use the triangular peg to join the Trays side to side. Each peg has a notch to prevent losing it in the…
I found nothing to my liking online - blender'd my own
Spice Rack Organizer is a practical under-cabinet storage solution that helps keep your favorite spices organized while freeing up valuable countertop and cabinet space 🧂 Easy installation using double-sided tape or 4× countersunk screws…
Spice rack for up to 3 “just spices“ spice containers. Also fits for many other spice jars. Inner diameter 59 mm. The design fits for up to 3 holders (for a total of 9 spices) inside the cabinet of a typical kitchen door (Ikea). Either…
A simple kitchen box that can be customized to your liking. An organizer for storing spices, instant soups, and much more. This model is also perfect for the bathroom to store face paint palettes, makeup, and other items. The…
Materials: 3x M3 screws + nuts or threaded inserts to hold the bottom floor and bearing parts together 3x beams Ø12mm (printed or from wood as in pics) 3x screws to mount the top plate to the beams Printing: All parts with 0.2mm layer…
Another spice packet organizer (or seasoning pouch, or marinade mix, or…) There are plenty of other examples on Printables, but I specifically wanted an organizer where I could flip through the packets and see the fronts, but remove them…
Needed a bit of organization in the kitchen with so many spice bottles. The wife was too short to see the labels so I made pullout and tilt down drawers. Also made a taller one, which will be included. Two types of drawers and two heights…
Organizer for spice bags to pantry. Inspired by vanilka-box. This model has sufficient size for bags available in CZ.
This Slide-Out Spice Rack is a clever solution for keeping your kitchen spices organized and easily accessible. It is designed to fit seamlessly into most kitchen cabinets, and can be modified if necessary. This pull-out spice rack…
This is a very basic storage box for spice's refill bags. outside measurements are 2 MM Thickness 110 MM deep 75 MM high 220 MM wide (I've reduced this measurement in the gcode to 217 MM in order to print well)
A custom spice rack made to hold 12 square shaped spice jars. It was designed specifically for these: https://smile.amazon.com/gp/product/B07VHBX3ZC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 but I have found the most common square…
I wanted to double stack large spice bottles using the Spice Rack Pullout by SpongyBob so I made a version of the larger bottom part that can stack. You'll still need all the other pieces of the original set to use along with this part.…
Admittedly, the slider is somewhat flexible. It is best to print it from PETG at a minimum. Länge: 300mm Breite: 54mm/60mm Insert the slider as shown in the picture. Push it in until the recess in the groove lines up with the black part…
ABS, PETG, PLA are OK. Better to have supports on overhangs of top & bottom shelves. As someone commented, i should clearly mention that top part is higher, than original. Beware: top part of this item is 132.6 mm in height!
I designed this shelf to add some additional storage space to our kitchen cabinets, for smaller spice and medicine bottles. I wanted something that didn't require drilling holes or double sided tape. The shelf has hooks that attach to the…
This is my very first upload of a 3D model so bear with me if something is missing or to much ;) Printed with 0.2mm layer hight and PLA. Larger layerhights will influence the fit of the dovetail connection (test print recommended) Just…
Spice racks for 40mm spice jars like Hartkorn. You can use left and right 4 peice model to fill entire cabinet door or use single racks tho have a modular solution. You can also use Prusa Slicer to cut away the connectors to use the rack…
This is a collection of shelves and legs/supports that fit together and allow you to build small custom shelving, perfect for small spaces like cabinets and small things like spices, paints, etc. The Fusion 360 file is also provided, in…
Slide Out Spice Rack This design is based on and inspired by: Spice Rack Pullout Design Update by spongybob1958 (Originally found on Thingiverse: https://www.thingiverse.com/thing:4826878 (and recently updated here on Printables:…
Simple spice holder that can be rotated to access all spices. I used a couple of metallic washers (16mm diameter) between the base and the top parts to help with a smooth rotation. The holes for the spice containers are 45mm in diameter.
Dune spice collectors used as containers for the resources in the Dune Imperium board game. Original design of this Harvester by Asledziu . If you are considering printing this for profit, please contact him, or message me for his contact…
Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…
This spice rack will hold 16 regular spice jars like those sold in supermarkets (e.g. Schwartz, ASDA etc.) Jar dimensions: diameter ~44mm, height up to 12cm. The rack is designed with very tight tolerances, as I didn't want to use glue on…
suitable for up to 60mm countainers fits into IKEA cabinets 2025 - print all in at once model for bigger printers
small 3x4 spice rack for cupboard organization. Uses 4oz square spice jars https://www.amazon.ca/gp/product/B077T2252Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print instructions PLA works fine pirnt at .30mm for quicker print.…
Problem : I buy more spice jars than my spice rack can hold. They end up cluttering the kitchen up. Solution : A modular spice rack with one repeatable component. When you buy a new jar just print a new part for the rack. Printing…
This is the 4th sliding spice rack in a series. After seeing the size of the 100mm version and the 150mm version next to each other decided to make this 125mm version. For this version, the basket is 125mm wide. You will need a large…
Our spice bags were just laying in a cupboard completely disorganized. This print keeps them upright and prevents them from falling out of the cupboard. The dimensions are 200mm x 150mm x 80 mm tall. The slots are 20mm wide. There is one…
This is a remix of another, much larger pill organizer. I found it might be a handy way to bring your favorite spices while camping or traveling, especially since it's refillable. The lid has a little ratchet that spins around so the…
This thing is designed to make the spices (or whatever you need organized) in the back of the cabinet more accessible, by raising them up they're easier to see. You can make it as wide as you want. If you're not covering the entire width…
Kräuterschilder zweifarbig aus ASA. Kleine Schildchen zum Beschriften von Kräuterbeeten. Weitere Kräuter findet ihr unter Dateien.
J'ai modéliser le personnage Spicke du jeu mobile brawl star car je trouvais ce personnage en forme de kactus super sympa. Après avoir imprimer cette figurine elle trouvera certainement une place sur vos étagères et étoffera votre…
With this fully parametric remix you can customize the dimensions of SpongyBob's original Spice Rack Pullout design. Want to use wider spice containers? Need a taller version of the top shelf? No problem at all, just follow the…
Simple spice rack/spice stairs I designed for a friend. I printed this with 5% infill and it took just over 12 hours. Perfect for placing different spices/salts/seasonings as a display or a way to organize and see everything that is in…
This is a 4x spice rack designed to hold either Choice 7oz Flat Top Containers or Choice 7oz Pour Top Containers. The print is designed to be straight forward; just place on the bed like the attached image. no supports or post processing…
Here are the fantastic Minions created by Heidi Makes ( @erikaheidi ) with coloring added using Prusaslicer. The 3MF is configured for four perimeters and 140% of the original size for added strengh in the arms and other thin parts.…
Printed on PETG to be a bit more durable. 0.4 Nozzle 0.12 layer height 50% infill Might need a bit of “X-Y Hole compensation” based on tolerances. Printed on Bambulab P1S
Based on the following model from ewap https://www.thingiverse.com/thing:1896166 I found the model way too small to hold chili spice packets, Italian seasoning packets and ranch dressing packets, so I've increased the size. After printing…
This is a spice lid designed to work with a regular mouth mason jar. I was not happy with any of the options available for spice lids. While I still have some tweaking to complete, I am happy with what I have made thus far. I was inspired…
This is a remix of this design: https://www.printables.com/model/58718-spice-rack-pullout Thanks to the original creator. This spice rack was what I was looking for, but I needed to mount it from the top, so i modified it on fusion360 and…
A simple rack for Guldfisk jars from Ikea. Any 4cm diameter jars should fit alright, but if they are taller than 8cm they may be hard to take out. To stack them, simply glue them together. If you want to stack them higher than 5 levels, I…
This is a fully parametric spice rack, but also can be converted to a basic drawer system for pretty much anything else. The main goal was to have railed drawers with an endstop and have the structure be simple enough that it wouldn't…
A simple spice rack stair step that uses the entire height of the Core One's Z axis. Parametric Customizing To adjust the model, visit the OnShape document , create a copy and customize away. The shell is step is suppressed, but if you…
(Despicable Me) Minions wall art
I designed this spice rack to match the aesthetic of my pantry and to use some spare 1" x 3" boards I had. I think the combination of stained wood and black plastic looks really nice. I used a dark walnut stain and clear polyurethane…
Spices The spices were hard to find and didn't fit in the cupboard. So I made these racks. They hold 24 jars on a removable caddy, 8 more jars on a fixed shelf in back, and 8 tall jars and 8 short jars on the cupboard door. 48 jars in…
This is a snap connector and pin to connect the parts of the spice rack (https://www.thingiverse.com/thing:4356449) together. They replace the need for a screws, washers, and/or book binders as mentioned in the original design. I have…
Gewürzregal passend für die Dosen von JustSpices als 4er 5er oder 6er Variante können Sie das Regal einfach mit poppelseitigen Klebeband in der Küche montieren.
Different shapes of small containers to use when going camping. Use for spices or shampoo or whatever. UPDATE: Due to comments, I have added another model with smaller and tighter threads. The square containers might have issues with…
Simple spices holder in Ø45mm or Ø50.8mm. With 2, 3 or 4 places. To fixed to your wall or other.
I needed a spice rack in which it would be easy to access the large number of spices and herbs I use but didn't stick out far from the wall. Having it rotate simply added a “cool factor” that I wanted as well. Each “car” holds 6-7 average…
Fans of Despicable Me 3 might recognize this action figure of Evil Bratt. It's a jumbo action figure! Banana for scale (of course). Print Settings Nozzle and Layers: I printed all pieces with a 0.40 mm nozzle and 0.15 mm layers. A 0.60 mm…
Pudełko na przyprawy z napisem "przyprawy" wykonane na drukarce Anycubic kobra 2 neo. Druk 4g15min. Wypełnienie 10%. Temp. 195/60. Różne wymiary z napisem lub bez, z przegródkami lub bez. Napis w wersji polskiej oraz angielskiej 3 pliki:…
I've watched the Spice Rack Pullout by SpongyBob for a while, and finally decided to make it fit the 30 spice jars I bought off Temu a while back.
This is a very simple spice rack that looks really nice. These are the necessary parts: Two printed sides Two ~32cm long 10mm diameter wooden dowels One ~32cm long 40x10mm piece of wood (the model was updated to have exactly 40x10mm…
Spice rack inspired by legendary Homer Simpson creation from series 2 Model needs little bit experiences with 3D printing, not so easy to print, be patient The rack is printed of one piece without nails. Use tree supports, "hybrid tree"…
A decorative spice rack. Print instructions Category: Organization
There is one point You would need supports :D
This is a #3dp rack for the Penzey's Spice jars. This simple yet useful print gives you a good overview and easy access. </b> We have many of those spice jars, so my wife asked me to design a solution. We are very happy with it! If you…
The source marked this model as adult content.
Spice rack for cabinet door or wall. Has a good amount of spring to it. I have printed it out of PETG and PLA with no real issues. Only 3 or 4 screws need installed, but plenty of holes for different arrangements. I only used 4 #8x3/4…
Made this simple spice rack wich could be mounted on the inside of (kitchen) cabinet doors. some example sizes are included, for exaple: The 230_52 (230mm wide) one will fit 2x inside a 55cm wide kitchen cabinet The 255_52 (255mm wide)…
Print this file instead of “spice-top-cap-align” to allow for taller spice jars to fit on the top rack. It is a 1:1 replacement for that file, but leaves the top open, and provides the structural strength on the edges instead.
I was tired of how our spices moved around in the drawer we keep most of them in. I modeled up three different sizes of racks and have files to be able to print them individually or as groups.
I wanted a decent bottle for my BBQ rubs. The grate style top, breaks up any clumps. Works really well Category: Kitchen & Dining
Gewürzschaufel zur einfacheren Entnahme aus Gläsern und Beuteln. 4 verschiedene Ausführungen angelehnt am Design der Ankerkraut Gewürzschaufel, aber mit besserer Außenkontur passend zum Innendurchmesser der Gläser. Kleine Version:…
By stacking the spice containers vertically like this, you save shelf space and makes it more easy to find a specific spice, if you write the spice name on the lid of the containers. you will need 2 connectors and 2 spiceholder3 pieces.…
✅ Mounted using double‑sided tape ✅ Printed without supports ✅ PLA, PETG, ABS, or any other plastic
This is a remix of a cute articulated worm from here: Worm Key Ring by Madistudios - Thingiverse substituting its head with a dune worm. Print in place. Layer height: 0.2mm. Infill density : 15-20%. Supports will be required but only at…
A cute cauldron jar with a removable lid, perfect for herbs, salts, or table candy between dungeon crawls. Big enough to put a 3cm led tealight inside (about 6cm in diameter, 5cm height). The set includes a clean, manifold body and a…
Remix für besseren halt meiner Gewürz Dosen - wurde leicht vergrößert!
It's a Remix of Frank Deschners Spice Rack. The design was nice but i was missing something. So i decided to remix his design. Made it a littlebit smaller and stackable. This Version is unlimited Stackable. Limits only by physics. And it…
Just Spices shaker insert! This is my version of a Just-Spices insert with different hole sizes. The first one has 2mm and 3mm holes and the other one has 5mm and 8mm holes. My recommended settings: Filament: PLA Layer height: 0.2 Walls:…
Small Shelf for a better organization of your Spice inventory. 2-5 Containers per Print. Print instructions I recommend using Food safe Materials, like PLA or PETG. Use 3mm countersunk head screws for mounting. Print tested in PETG
You can't live without your Himalayan salt? Or you always need some cinnamon on top of your latte macchiato? Just take it with you wherever you go - with these keychain containers. 😎 Each container consists of three components: The lid…
I wanted to store my spices in my kitchen drawer (243mm Width x 500mm Depth x 65mm Height) and created a triangular shaped rack (242 mm Width x 113mm Depth x 25mm Height x 110mm Hypotenuse). You can adjust the dimensions in Cura to fit…
Instead of the lower screw cap, a funnel can be screwed on for easier filling. Print with PET-G. Best to have clear filament for the container and an identifying color for the top cap: White for salt, red for chili, black for pepper, etc.…
This Spice rack is made to be mounted on the wall or on the back of the cupboard door. This model provides the ends and the middle support section. you will need to get: 9mm diameter wood (I used 45cm long pieces) 6x25mm for the bottom…
Constantine St. Benedict Zippo Stash Box.
Square spice container to neatly organize all spices in your kitchen drawer. Dimensions are 40*40*91. Same as the Jumbo Supermarket spices (Dutch supermarket). Spices come in all kinds of shapes and sizes containerrs. Mostly round ones.…
A spice and condiment caddy with four slots that stands on the table with a handle on top offers a specific and convenient way to organize and access your spices. Let's explore the practicality of this particular design: Compact and…
No more mess in your spices :-) the hex base breaks long extrusions, which should eliminate warping. It also reduces filament usage.
This clean and modern spice rack is designed to keep your kitchen organized while looking great on any countertop. The simple, minimal structure makes it both sturdy and easy to print. 🛠 Print Info Manual scaling required in your slicer.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You need two wooden sticks on the front side with a diameter of 6 mm and the bottom two that support the weight of the spices with a diameter of 8 mm. You can choose the length of the sticks according to the number of your spices. The…
Super simple remix of the nice and helpful clip from @batteriea_. Upscaled to 30 mm and made the clip a little thicker.
Spice container whit box for 4 and 6 infill 15% Pla no supports
