Search results: steine

DeSteiner Model 1887 - mechanically working Winchester prop gun

DeSteiner Colt M1911 - mechanically working Prop Gun Pistol

Snub nose barrel for DeSteiner Revolver II

73mm snub nosed barrel. Picture compares to the original 155mm barrel. Print as per Original files instructions. Credit to DeSteiner making the revolver in the first place 👍

Steine

LEGO

Stock for DeSteiner 1887

While "shorty" or “grip only” versions of the Winchester 1887 are somewhat common, the Winchester 1887 was, from the factory, available with full stock. While there were various different styles over time, I chose to model my stock mostly…

DeSteiner Model 1887 - Long barrel modification

I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…

Bosch GTS10 Nutensteine/Slot Nuts M6

Ich habe Nutensteine für die Tischkreissäge Bosch GTS10XC gezeichnet und gedruckt. Sie sind für M6 6-Kantschrauben gedacht. Da die linke und die rechte Nut unterschiedlich sind, habe ich natürlich auch entsprechend unterschiedliche…

Zahlenbausteine nach Montessori, number blocks

Ich habe einen Satz Zahlenbausteine nach Montessori erstellt. Die Zahlen sind so aufgebaut, dass sie zum visuellen Rechnen verwendet werden können. Hintergrund ist die Hilfestellung zum ersten Rechnen für unseren Sohn. Jede Zahl…

DeSteiner 1911 stronger spring.

Hollow blocks / hollow bricks , Hohlblocksteine 1:87, H0

Hollow blocks / hollow bricks , Hohlblocksteine 1:87, H0 Category: Buildings & Structures

Revolver II, DeSteiner: double-action-path, a way to print it more sturdier, for a long life!

The small nipple on the “double-action-path” was broken three times. I tried to print it 45 degrees for a better layer adhesion , I've added supports, which you have to remove after printing. It works great, even with PLA! Print it with…

MOD for DeSteiner Model 1887

12g-ammo in two pieces, can be printed in two colors, then glued together. Additional picatinny rail on barrel-grip_back. Several stronger parts.

Nutsteine für das Microjig Matchfit System

Die Nutsteine wurden in einer Auflösung von 0,16 mit PLA+ und 16% Infill gedruckt.

Slotter Spielsteine / Downfall token

I had problems with the model available ( https://www.thingiverse.com/thing:5151297 ). The tokens fell off between the gears. Therefore I created my own version without rounded edges. I tried to get the numbers as round as possible, like…

Rasengittersteine 1/14

Rasengittersteine in 1/14

Threaded 12 Gauge Ammo for DeSteiner 1887

I loved DeSteiner's 1887 shotgun. Printed two sets of them, however looking at the remixes for the shell they either need gluing, or filament swapping which is fine until you drop the shell and it breaks. The glue didnt work for me…

Holster for DeSteiner Revolver II

I created a holster for my sister's halloween costume. The revolver is made by the designer DeSteiner You can print it on a 256x256mm build plate, fold it and stitch it together with thread. Any mostly standard 40mm belts will fit.

Building Block Coupling / Connector - Anhänger Kupplung für Bausteine

Building Block part to connect two vehicles or parts. rotation possible. loos fitting. easay to connect and disconnect. this is not Duplo or Lego. It is a own design and build and modeled on my own!

Fireable DeSteiner 44 Magnum Bullet

I wanted my DeSteiner Revolver II to be more realistic. But I got that idea after I had already printed it, and I didn't want to use more filament than necessary. So I modified it after printing (hence the lack of files for the other…

sturdier triger (DeSteiner 44)

My triger keept on breaking so i added a slanted piece at the base of the hook (where it was failing)

Desteiner's V10 Engine Project file for Orcaslicer

3MF file of Desteiner's V10 Engine to make it easier for you to print.

GraviTrax Junior Height Spacers (10–100 mm) / Höhensteine

These stackable height spacers allow you to raise your GraviTrax Junior tracks to different levels. The set includes spacers with heights from 10 mm to 100 mm , making it easy to create ramps, bridges and multi-level marble runs. All…

Extra stubby barrel for DeSteiner Revolver II

64mm Extra stubby barrel

LEGO Klemmbausteine / LEGO Clamping Blocks

Klemmbausteine sind mit das einfachste seiner Fantasie freien lauf zu lassen gedruckt mit 15 % infill und einer 0,4mm nozzle auf 0,25 Struktur und in besonderen farben freut sich jeder coole dinge zu bauen. über likes makes und follower…

Klemmbausteine/Lego Bodenplatte

Bodenplatten passend für Klemmbausteine wie Lego

DeSteiner 1887, shotgun picatinny shell holder

Someone already made a custom picatinny for the DeSteiner shotgun, so I made a shell holder for it.

M45A1 Slide for DeSteiner Colt M1911

Backgammon Merels Checkers Stones - Backgammon Mühle Dame Steine

Backgammon Merels Checkers Stones - Backgammon Mühle Dame Steine 28 x 7 mm

Aufsteller für Steine o.ä. Stand for painted stones or similar

Aufsteller für bemalte Steine oder ähnliches An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist willkommen! Bitte beachtet…

Mount for Steinel heatgun

A simple mount for a Steinel heat gun (type-3841). Nothing fancy.

Magnetic building blocks / Magnetbausteine

EN - Additional bricks for the sets from Toylino Plate 1x2 Plate 1x3 Plate 2x2 Big triangle 2x Pentagon 1x Hexagon 1x Octagon 1x … more to come (requests and new ideas are welcome!) Attention: requires special diametrically magnetised…

DeSteiner Colt M1911 Safety Cap

Expanse Themed Grips for DeSteiner Colt 1911

I’m a huge fan of The Expanse and wanted to incorporate some of the faction logos with the grips for DeSteiner’s 1911 mechanically working Prop Gun Pistol. There are grips for: MCRN, OPA and Amos' Devil pin. (as with any part that’s been…

Risiko Brettspiel klassische Spielsteine

Die Guten alten Risiko Armeen - Einer, Fünfer und Zehner Steine

holder for heatgun (Steinel hl1610s)

prints with no supports

Mirka Deros Systeiner insert

Mirka Deros systeiner organizer to hold 150 mm and 120 mm sanding papers. With additional prints you can stack more 150 mm holders on top of each other. With magnets inserted and glued to each recessed holes, the holders won't slide…

Wilma Tüftelbausteine - Open-Source Prototyping Kit

Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…

Festool Systeiner Labels

Befor printing, add your text, otherwise you'll print a blank state. You can do this in the slicer.

DeSteiner Side Shell Holder, 2 part shells (Increase strength) Complete print for CORE One

I redesigned the left side of Desteiner shotgun to hold the 4 shells. On the left side. The original MMU printed shell broke after a few uses. I made an 2 piece shell design for easy printing and mounting. (It involves glue this time) And…

Knight figure in front of stone castle wall - Ritterfigur vor steinerner Burgmauer

.

Pumpkin Lampshade for Steinel L 585 Lamp

This lampshade replaces the original glass STEINEL L 585 lampshade. Perfect for Halloween. I printed it using “Glow in the dark” filament for the Eyes. Print settings: Support: touching bed Layerh.: 0.25mm I glued the top and the eyes…

Steinel 3002 Gluematic stand

Stand for the Steinel glue gun, better print from PETG or other material, not PLA.

4 in a row - token / 4 Gewinnt - Spielsteine

Hi Everybody, I just made for my daughter´s all-day school new tokens of the game 4 In A Row. This token are created with bevel. Dimensions are 17,5 x 17,5 x 3,4 mm. Have fun with it. Print Settings Printer Brand: Anycubic Printer:…

Rear Blade Sight for DeSteiner Revolver II

This is just a slight modification of the original rear sight for the DeSteiner Revolver II. As of the time I am first uploading it, I have yet to print or test it, but while designing this piece, I tried to make absolutely sure it will…

THE MILL GAME Set incl. Tokens & Box (Mühlespiel mit Steinen & Box)

Our compact version of the well known MILL GAME including a nice dovetail box for the 2x 9 tokens. The playing board is only 110x110mm large to make this game a travel game, too. You can scale every components up in your slicer as you…

Steinerne Ruine/The Stones Ruine

.

Steinerne Höhlenlandschaft für Aquarien/Stone cave landscape for aquariums

.

Calculating Stones | Rechensteine

Tool for Promoting Number Sense up to 10 Werkzeug zur Förderung des Zahlenverständnisses bis 10

Bricks for Empirical Formula – Verhältnisformel-Bausteine

https://www.tinkercad.com/things/6p7QvpgFpcQ-molekulbausteine One of my students designed these building blocks to introduce the empirical formula in chemistry based on an idea from a colleague. There is also a worksheet in the files…

Steinel HL-Stick Wall Mount

simple mount for Steinel HL-Stick Print instructions Category: Hobby Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 0.3 Infill: 15% Gyroid Filament: Prusament PETG black

Aufsteller für Steine o.ä. Stand for painted stones or similar

Aufsteller für bemalte Steine oder ähnliches Stand for painted stones or similar Category: Decor

manual Brick-Push-Sorter Lego Sortierer no picking Klemmbausteine sortieren

Ermöglicht das schnelle manuelle Sortieren von Klemmbausteinen (Lego u.a.) oder anderen Kleinteilen. Wahlweise 6 bis 9 Sortierfächer. Kein Aufheben der einzelnen Steine notwendig, einfach in das richtige Fach schieben. - Es sind auch…

Magnetbausteine Riesenrad

Magnetic Buildplate gedruckt für die Magnetbausteine , das Riesenrad war die Achse gebrochen 110mm lang mit suport drucken (Touch Buildplate) 20% Infill

Steinel gluematic 3002 drip tray / Tropfschale

No support

Ring Cap firing mods for DeSteiner 1887

Shells are now out! Let me know if anyone tests it i'm open for comments I personally have gotten it to work quite well I believe i also included a breech you can try it for yourself if you'd like I currently have it installed on mine and…

Steinel Heizluftpistole Halter / Heatgun holder

Easy to print, without any supports. Use two 4mm or 4,5mm bolts to screw it to the wall

Propeller für DUPLO Klemmbausteine

Einfacher Propeller für DUPLO Klemmbausteine. Funktioniert auch als Heck-Rotor eines Hubschraubers. Die Basis (2x2) habe ich aus einen der vielen DUPLO-Generatoren entnommen und angepasst. Für die Achse, wo der Propeller aufgesteckt wird,…

magnetic building blocks magnetbausteine

I expanded the existing set with these magnetic blocks. The children love them and I will probably have to print more in the near future. VERY VERY important: !! only use stainless steel or brass noozle !! otherwise the magnets will stick…

Fire basket for bricks / Feuerkörbe für Klemmbausteine

Englisch I am offering two fire baskets and the corresponding flame for medieval brick dioramas. The fire baskets can be equipped with WS2812 or other LEDs on a round circuit board with a diameter of 10 mm for lighting. The fire baskets…

Steinel Hot Air Gun Rubber Foot

Disclaimer This was initially not intended for public release so the quality is as good as I needed to be to work. Publication was due to repair design contest. Motivation I was missing one of the rubber feet at the base of my Steinl…

Märklin My World H0 Höhenbausteine

Habe das Modell etwas "enger" gemacht, da ich in PLA Druckte und sich dies "abnutzt", der Druckpreis ist aber wahrscheinlich nicht viel günstiger als Der Angebotspreis der Originalteile, je nach Filamentpreis. Gezeichnet mit Autodesk Fusion

Adapter für Steinel IS140-2

Distanzstück 55mm und Eckenhalter für Steinel IS140-2 Bewegungsmelder

Domino Box mit Deckel für bis zu 28 Steine (Domino Box with lid for up to 28 pieces)

My domino pieces: 5x15x30 mm Box inside dimensions: 146x16x31 mm Overall outside dimensions: 154x24x35 mm On the lid the word is "DOMINO". One edition is with holes in the bottom. I hope, you find this useful. I would be glad for some…

display stand label with two colours for DeSteiner Revolver II

Standing Torch for Bricks / Standfackel für Klemmbausteine

Englisch I am offering two heads for stand torches and the corresponding flame for medieval brick dioramas. The torches can be equipped with WS2812 or other LEDs on a round circuit board with a diameter of 10 mm for lighting. The torches…

Rotor für DUPLO Klemmbausteine

Ein einfacher Rotor für die DUPLO Klemmbausteine um Hubschrauber zu bauen. Basiert auf der Drehmechanik von https://www.printables.com/model/1524741-duplo-gear-set/files.

Verbinder Holzbausteine

Damit können die cm, dm und m-Bausteine aufeinander zusammen gehalten werden

K.Klotz Bausteine

Feine Präzisions-Holzbausteine mit 24mm Raster 4mm Bohrungen, kompatibel zu Lego, Dublo, Fischertechnik(Wellen)

Form für Pflastersteine

Mit der Form können Verbundpflastersteine hergestellt werden. Ich habe die Form in PLA gedruckt da nur wenige Steine benötigt wurden.

Nano Bricks, Diamond Bricks, Micro Bricks / Nano Klemmbausteine

For regular-sized building bricks there are plenty of STL print templates available. I very often build with nano bricks (also called diamond or micro). The one-stud brick in this scale is 4 mm by 4 mm in size. For this brick size, this…

TAC Spielsteine für Blinde und Sehbehinderte

Der TAC Verlag bietet eine Variante für blinde Spieler mit Karten mit Brailleschrift und ertastbaren Spielsteinen. Wenn man aber bereits ein TAC Spiel (für sehende) hat müsste man das komplette Spiel noch einmal kaufen. Außerdem gibt es…

Klemmbausteine Schienen Aufbewahrung Gerade

Halter zum Aufbewahren von Schienen für gerade und gebogen ( R40 ). Sie sind Stapelbar. Vom Marktführer, die Schienen können auch verstaut werden. Viel Spaß damit. Schichthöhe: 0.2mm Fülldichte: 20% Wandlinien: 2

Klemmbausteine Schienen Aufbewahrung gebogen (R40)

Halter zum Aufbewahren von Schienen für gerade und gebogen ( R40 ). Sie sind Stapelbar. Vom Marktführer, die Schienen können auch verstaut werden. Viel Spaß damit. Schichthöhe: 0.2mm Fülldichte: 20% Wandlinien: 2

Quick Loader for DeSteiner Single Action Revolver Prob - Bullet Jet

The fourth and last of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the…

V10 Mount for De Steiner V10 Engine

This Mount secures a solid stand for the V10 Engine made by De Steiner. It works with the SKELETON OILPAN only

Quick Loader for DeSteiner Single Action Revolver Prob - Clamp Style

The first of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

Steinel L600 ESPCam Mod

Print instructions Print all the parts with 0.2mm layer height. The seals have to be printed with TPU, the rest with anything, but I'd recommend ASA for UV resistance. As the models aren't oriented correctly, just use the lay flat option…

Quick Loader for DeSteiner Single Action Revolver Prob - Push 'n Shoot

The third of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

STEINEL Neo2 STAND | Hot Glue Gun / Heißklebepistole

STEINEL Neo2 STAND | Hot Glue Gun / Heißklebepistole (note: Just glue the ‘gun’ to the stand!)

Duplo L-Steine verschiedene Größen

Duplo L-Steine verschiedene Größen

Gridfinity tool bin for the Steinel Gluematic 3002 hot glue gun

Gridfinity bin for the Steinel Gluematic 3002 hot glue gun. Size is 5 x 5 units and 6 units high. Other Steinel hot glue guns might also fit, especially older ones and the 1011, but I haven't tested that. You can check with the included…

Spiel Steine für Kinder

Spiel Steine für Kinder

Wandhalter T Nutensteine M14

Wandhalter T nutensteine ( M14) bei mir M8 + M10 Gewinde in M14 Nutenstein 16mm Nutenbreite.Diese Nutensteine mit M8 / M10 sind für Teilapparat klein und Schwenkschraubstock Montage auf derFräsmaschine die M14 Nutensteine (Nutenbreite…

Quick Loader for DeSteiner Single Action Revolver Prob - Twist 'n Shoot

The second of four... Hello, lovers of refined shooting, I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that. But, as always, there are ideas for customisation. Now that the revolver can…

Steel spring mod for DeSteiner's Colt M1911

I didn't have much luck with a printed PETG spring (even the stronger one), so I've made a steel spring mod for it. You will need a 14mm (OD) x 100mm(length) x 1mm(wire thickness) spring, though an 110mm length will also work if you feel…

Steinel Night Matic Dämmerungsschalter cover for better adjustment | Abdeckung für leichte Einstellung

For the light to turn on at dawn, you need a switch like the shown one. To easily set it to the right threshold, you can use this cover which can be glued o the switch. Diese Abdeckung für den gängigen Dämmerungsschalter hilft, den…

Special Nano Bricks (Diamond, Micro) / Spezielle Nano Klemmbausteine.

For regular-sized building bricks there is a wide range of STL print templates available. I very often build with nano bricks (also called diamond or micro bricks). The one-stud brick in this scale is 4 mm by 4 mm in size. For this nano…

Halterung Schwert Klemmbausteine

Halterung für ein Schwert aus Klemmbausteinen, damit man es auch unter das regal hängen kann. gedruckt auf MK4 in PETG schwarz Montage jeweils 2 Schrauben

Holder for Hot Glue Steinel PRO MobileGlue 5011

Bishop Steiner's Thunderbutt

Bishop Steiner drew this fun custom unit for the American Mecha game and I decided to make it into a printable miniature. All credit for the concept, art, etc. goes to Bishop Steiner. I printed mine in black resin, then drybrushed copper…

Flat Nano Bricks (Diamond, Micro) / Flache Nano Klemmbausteine

For regular-sized building bricks there is a wide range of STL print templates available. I very often build with nano bricks (also called diamond or micro bricks). The one-stud brick in this scale is 4 mm by 4 mm in size. For this nano…

Rechenplatte für Muggelsteine Zahlenraum 10

Rechenplatte für Muggelsteine – Zahlenraum 10 Mit dieser Rechenplatte können Kinder Zahlen bis 10 mit Muggelsteinen (flachen Glassteinen) begreifbar machen. Das Material eignet sich für den Mathematikunterricht in der Grundschule, für die…

Power button cover for GlueGun Steinel MG1007-S

This battery powered gluegun have easily acessible button for powering on, thanks to this model no more unwanted powering device in backpack.

Glue gun holder for Steinel MG1007

You'll find explanations in french on my website : https://labidulerie.vicou.be/support-pistolet-a-colle/ No supports needed if printed in the position showed on the picture

FuchsDesign Glasbau Elemente 230mm für 80mm Steine

Printed them standing one to the other with short bridges.

IKEA SKADIS Steinel MG1007-S MobileGlue Holder

A holder for the Steinel MobileGlue MG 1007-S cordless glue pen to mount on an IKEA SKÅDIS pegboard. The pen slides in from the top, nozzle down, and wedges itself between the side walls – two quivers on the sides store 4 spare 7 mm glue…

Wilma Tüftelbausteine - Open-Source Prototyping Kit

Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…

Bosch / Steinel Glue pen gun holder for Skadis system NA plug remix

I simply modified the holes for the north american wall plug to fit in, and i also made more space inside the gun space.

display stand label with two colours for DeSteiner Revolver II

The top text on the original label needs three colours to look good (one for the background, one for the bottom text and the drop shadow on the top text and one for the letters of the top text). I only had black and white PLA tho, so I…

Holster for DeSteiner Revolver II

I created a holster for my sister's halloween costume. The revolver is made by the designer DeSteiner You can print it on a 256x256mm build plate, fold it and stitch it together with thread. Any mostly standard 40mm belts will fit.