Counting matching models…
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166). It is not an exact replica but a…
With layer high 0.25 --> Layer 16.45, stop for insert the Hex nut M5. I had to change all my socket T15 with a CEE socket, but the CEE is bigger than the T15. So i made this adapter. T15 (Screw hole 38x38 M3-M4) CEE (Screw hole 60x60 M5)
Introduction With this adapter, you can hard-mount your Thrustmaster TMX or T150 steering wheel (T128, T248, T-GT II, T300, TX, TS, T500, 458, T80 models as well). It's quite an upgrade from the OEM clamp-style racing-fixation-kit-fk2…
Introduction The weak link in the less expensive Thrustmaster steering wheels is the plastic gear and optical timing wheel. Over time it can wear out and with enough force, it can strip teeth. I was inspired by the Thingiverse models…
This remix extends the mounting surface by ~10mm to make room for Ego trimmers with an adjustable handle like the ST1510T. The older style trimmers still fit, but have bit of room to slide back and forth. I printed mine in Polymaker…
Hi Internet Sim Peeps, At request, I've whipped up a TMX/T150 to stock Thrustmaster Quick Release hub adaptor. Now, I want to preface this with the fact that I don't have a TMX or T150. I've used reference images and materials to gather…
I built this to use on my French cleat wall. There was not a magnetic organizer that exactly fit my Tekton socket set, so I made one. I combined it with some ½" plywood, some bar and cup magnets from Amazon and made a wall mounted socket…
Might need supports, depending on your printer's capability.
Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…
make sure to use a small m3 bolt and nut to properly attach the knob Final version V4 uploaded, rod now fits snug in hole, handle fits without touching surrounding plastic and handle was thickened for easier use.
Adapted mounting plate for the Bosch BT150 tripod to screw on your own superstructures. https://www.thingiverse.com/thing:2799254 Happy printing MFG Chris Follow me on... prusaprinters.org thingiverse Instagram If you like it ;) - Thx for…
Print with 100% infill
Please check the excellent description on the original model that contains all relevant materials and print settings. Just in case, I've attached that model's description as a PDF under this model. You might need to reverse the plate,…
Designed the part with Solidworks i designed it for my Thrustmaster T150 but it works with some other Thrustmaster pedals too. I printed it on 0.20 mm height with eryone black PETG .
Need this item but lack a printer? Check it out at my store through the following link: TACustomDesign Etsy Store I've held back from listing the final enhancements made to the adapter as they are exclusively available in my store. Dillon…
Replacemnt part for the 2 pedal set from thrustmaster. I have made 40 and 42 gear variant. I found that both variants worked reasonably well, results may vary. For easyer printing i reduced the sholder from the original design aand added…
The standard gaiter ring on my 2005 Fiesta was a bit tatty, so i designed a new one to print in the same blue as my car! 100% infill. no supports, concentric first layer for a nice finish.
Holds 18 T12 or T15 Soldering Iron Tips and spins on the base with a 608 bearing The bearing might be tight, but should fit with some force. I printed these at draft settings, 0.3mm layers no supports Print Settings Printer Brand: Prusa…
My parents got a new EGO ST1521S string trimmer to replace their aging trimmer they had. The new one did not come with an obvious place to put a shoulder strap like their old one did. This clamps onto the shaft of the trimmer just below…
This is magazine clamp for a First Strike (AKA Tiberius Arms) T15 Magazine. I really like the look they give my paintball marker. Not to mention increased reload times. This design with my "printing formula" have made a clamp that…
Replace your Jumper T15 logo with a NordFPV logo or use the step file to add your own logo and colors. You will need to remove the original T15 logo, I recommend to warm it up with a hot air gun, and peel it off, and then add a couple of…
Ego 56-volt ST1500 trimmer bump head (Part No. for replacement head is AH1500). For the STA1500 Multi-Tool trimmer attachment, the bump head is: AH1501. Why? Made this because I wore out two of them, and at $30 each, they are cost…
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
T15 bolt case for the default semi auto bolt. The lid holds using 4 6x3 magnets.
[ENG] Hi everyone, Thanks to @MoreSideways, I got into drifting in Assetto Corsa. Unfortunately, the narrow desk surface combined with its slippery finish makes it so that the steering wheel can shift during more intense movements, even…
Back again with a nice print for the Fiesta mk6/ST150 owners. Love my car, the plain black bits are boring. this cupholder is nice, just pops in, stays in place and gives the car a little nice detail. 64mm is a perfect fit. not too tight…
with this adapter you can use T15 mags in the MCS Hurricane. this one should work with first strike rounds but it have not been field tested so it may give some feeding errors parts needed for that system is a small pies of a tiny…
For the Jumper T15, a larger battery holder has been created to accommodate the Nitecore NL2150 (5000mAh) batteries, which do not fit in the standard battery tray. The Jumper T15 originally supports 21700 lithium-ion cells (Printed on the…
Here's a completely over-engineered T12/T15 soldering iron tip holder. It can be wall mounted to hold tips in either a vertical or horizontal orientation. The round, enclosed portion of the holder flexes outward to make inserting and…
Just like the original Hakko B2756 but you can print as many as you need now. I printed with 5 walls, 0.2mm height and 80-100% infill to add some weight to it. I debated adding a lead weight to it but with the tips in it it has enough…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
This is a sequential shifter addon for Thrustmaster T150 wheel which uses L3 and R3 buttons on the wheel's base for operation. It's a purely mechanical solution - no soldering (at all) or modifications (almost) needed. Some additional…
with this part you can place different brand of loaders on your mag loader with the adjustable feedneck. the other original parts can be found at https://www.thingiverse.com/thing:2918336 movie link: Print Settings Printer Brand: Creality…
Note: This is a mirror of a Thingiverse post , originally published August 22nd, 2021. When used with the Hakko 'anti-bacterial' sleeve, this adapter allows you to use Hakko T12/T15 soldering tips with your TS100. This works because the…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
this is the T15 model adapter that works with the SAR12 marker. it also got the anti ball drop build in. so when you shoot your mag empty it will not drop te 2 last rounds that could not be fed in the chamber by the magazine and yes I…
there are more TMC magazine winders out there. but this one is made to work for a dual mag setup. link to video Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Resolution: 0.2mm Infill: 40% Filament: Jupiter PETG…
this is the T15 model adapter that works with the SAR12 marker. and yes I have not printed this thing out. but I did made a test fit of the part to make sure the mag adapter locks in place. and the magwel designs it self are tested. the…
with this adapter you can use T15 mags in the MCS BOLT and Blizzard. this one should work with first strike rounds but it have not been field tested so it may give some feeding errors parts needed for that system is a small pies of a tiny…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
here is the first first strike T15 mag. I think what you know what this means haha.. there is more to come. it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the…
Ein Stützrohr für den wunderbaren Hydroponiktower MHT150 von TechnoVardo, das perfekt für den Ikea-Sortera-60-Liter-Behälter geeignet ist. Damit ich es auf meinem Drucker drucken kann, muss es dreiteilig sein, die beiden oberen Segmente…
this Hi cap adapter does work. but you have to keep in mind that there is more of a chance for a mis feed. if there is something not right. since the mag haves to push 5 more paintballs up then normal. so it’s maybe pushing the limit of…
MODELLINO DI ARREDO GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Did you blow the tweeters on your Polk T15 Bookshelf Speakers? I did too…. These adapters are designed to replace your blown tweeters with Skar Audio TWS-01 tweeters. They cost like $21 USD on amazon and are a nearly identical tweeter…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
Current model is for 25mm bars. For other bar diameters, adjust “d_bar” in OpenSCAD file, and maybe “l_screw” and “ep2”. It prints on Prusa Mini. Use PLA or PETG. Increase the number of walls (both perimeters and bottom/top). I used 6.…
Wall mount holder to screw on for a Fluke T150.
Vymezovací podložka pro T150/T300 pro vyvýšení upevnění / Dimension pad for T150/T300 for mounting. Print infill - 75% tree supports
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
HALLOWEEN GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
For a neat openGrid by David D look, I wanted to cover my Torx T15 screws with a cap. I first tried the Screw Hole Caps | openGrid by Gavin F , but they don’t work for me when there’s already a screw in the hole (they stick out way too…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
this set is for lest say old school paintball markers. that will usually use a clamping elbow to attach a hopper to it. with this model can you directly attach the magfed adapter. for a cleaner look to finish the clamping part use a m3…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
Support for the Bebird T15 ear cleaner and its accessories.
PORTA TRUCCHI GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
MODELLINO DI ABITAZIONE GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
ORGANIZZATORE GT15 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
ARTE&DISIGN GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS…
ORGANIZZATORE GT159 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
I have retrofitted thrust bearings (10x18.5.5mm) to the cross table, the resulting gap is bridged by this extension so that the hundredths scale is still clearly visible and adjustable. I printed the outer walls first to achieve a press…
Why is this a thing? well I was curious if it could be done haha. and well 20 rounds in one go with your Tipx or TCR sounds good to me. and well you could use it so your backup and primary only uses 1 mag type. or bring the adapter with…
This is a foot for elevating a Tripp Lite Smart1500 UPS off the floor. I'm not sure it's necessary, but I feel better having the UPS up a bit. The model is one inch, or 24.5mm, tall. It features a trapezoidal recess that fits onto the…
this is made for Fenix WT15R Flashlights to give you the possibility to use it as a signal or guiding light. prepared a long version (adds about 100mm) and a short one (around 40mm plus). by printing it in different colors u could create…
PARTI MECCANICHE FUSION_GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
DIDATTICA MOVIMENTI MECCANICI GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
VASO GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT152 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Originally published here: Motorola Moto X Play xt1562 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the…
Use this plate with your Singer sewing machine to be able to freely move the fabric while sewing. This fits my good ol' Singer 155 Anniversary that doesn't have a latch to lower the feed dogs, but this might fit other Singer sewing…
Title: Custom VESA Mount (100/75mm) for JAPANNEXT JN-MD-IPST156U Overview: A dedicated VESA mount for the JAPANNEXT 15.6" mobile monitor. Improvements: I added an M10 hole and a lanyard hole at the top for flexible mounting options…
The Vantrue Power T150 portable Air Compressor is a great tool, but unfortunately nozzles in the original box are very large. As a result, if you need a precise airflow, the original nozzles are often too wide, which also reduces the…
ARTE&DISIGN GT159 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This festool budget adapter uses a cheap remote trigger outlet switch to turn on the vacuum. Switch:…
LASER GT15 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
This is a homage to the superbly designed T15 5 round mag from Donutmaster34 - check out his original here: https://www.thingiverse.com/thing:2466296 where he has an excellent video. Please see his other versions which achieve some of the…
When you install AGO1 on T15 you need to cut case post. Here is a trick to maintain the case integrity You need to glue the spacer with E6000
I printed mine with Creality Black Hyper-PLA with a Creality K1 Max using a 0.4 nozzle and Smooth PEI plate at 15% infill using the default settings without a brim. I dicovered just after starting the print knowing that I would run out of…
The eyelet for the EGO trimmer model st1510t. I lost the corresponding part and was searching for a replacement online. I located one, but I made some modifications. I would recommend utilizing four walls and a 20% infill density. The…
Air through adapter to allow a hpa hose to be connected to your marker / rif through the rear when using a SARB-15 bullpup ar15 kit. Designed to print in firm plastics like pla, petg etc. if printed in rubber you'll need to adjust the…
240324 Kaercher T150 repair ring, 修復環, मरममत रग The Kaercher T150 is a patio cleaner low cost segment, it has a high wear on the ring that surrounds the cup. Mine was gone after a number of years cleaning the patio floor. I designed this…
P3-2121-64*64-T1500 - OpenGrid connector
These sturdy, speaker stands are perfect for home theaters or studio setups. a stable stand with TPU non-slip inserts
For a neat openGrid by David D look, I wanted to cover my Torx T15 screws with a cap. I first tried the Screw Hole Caps | openGrid by Gavin F , but they don’t work for me when there’s already a screw in the hole (they stick out way too…
make sure to use a small m3 bolt and nut to properly attach the knob Final version V4 uploaded, rod now fits snug in hole, handle fits without touching surrounding plastic and handle was thickened for easier use.
It snuggly fits into the standard protection that comes with the radio and protects the sticks, if they are in their longest position. Otherwise they would stick out and could see forces if the radio bounces in its case. Print two in…
Plug and panel-mount socket for XT150 connectors. 3-pole. A 2-pole version will also be available. Material: PCTG Infill: 100% Supports: No You will need M3 screws and nuts. The small holes at the end of the panel-mount socket are used to…
First Strike Detent for T15, FSC etc. Print in TPU, well tested by me with both round ball and FSR, super reliable and long lasting
ARTE&DISIGN GT150 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT151 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT152 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT153 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT154 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
