Counting matching models…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
I made some changes to the original Design: Added Ender 3 version of Y-Axis tensioner Uses M4 screws and insert instead of M5 Made the bearing holders slide into their housings easier Extended the length of the bearing holders so the…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Ramalamas have bearing wobble issues, Clees are bulky and not sleek, so….. Chunky ALPACA! A hybrid between all the amazing things Rama and Clee.
Please only print if you are OK with testing. Coming from the DIY printer world, I am not a big fan of the automatic belt tensioners on the Plus4. I desire too much control. So, I made new mounts and an insert to replace them with…
More tension on the Z belt loop by adding 1mm more tension.
This was designed for the Ender 3 Pro and inspired by similar models out there, but as an engineer, I couldn't just reuse someone else's and had to make my own. I had originally designed the adjustments to be done using a separate key to…
Decided to designed some custom Linelocs, originally because I wanted on with a hook. Each variant is good for ~40-80 lbs (with PLA+). I will be adding some slimmer variants in the near future + a reinforced hook. Print settings: PLA+…
Tensioners for Ender 3 Pro – Precision Made Simple Introducing the GIL tensioner, designed specifically for the Ender 3 Pro with 2020 X rail and 4040 Y rail. Precision is at the heart of this design, with tolerances dialed in to a tight…
I wanted to make a fully metal AWD mod including belt tensioners, so basically I merged these three excellent designs to create this mod/ remix (thanks for the inspiration guys!). I already have it working on my RatRig V-Core 3.1 without…
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
These are my remixes of the belt tensioner system for Ender-5. Basically, here are the modifications from the original design: * from 5 to only 2 parts * to be used with toothed idlers with inner diameter of 5mm * can be used even if you…
Update January 15, 2023 Version 1.3 with perfect alignment of the belts together with Icarus 2. 10 mm rod version pictured below but the same principle. Please take notice of the pulley orientation, see the pictures (new orientation with…
Description As per Henlor's original design, This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes while also working with the Creality CFS upgrade. This will prevent the belt to wear…
Simple tensioners for Ender 3 V2. Original internal pulleys are repurposed. Advantages in comparison with original ones: centered to avoid belt rubbing compatible with geared pulleys ≥20T about 6-7mm of additional Y-axis movement The goal…
Guyline tensioners/linelocs without the finger tab. MP5000 did a really great job designing these and the other variations but I found I really wasn't using the tab. Removing it means these will print with no support and save just a…
Remix of Humebeams Adjustable Belt Tensioner. The hex nut is replaced with a brass heat insert nut, and I also added two screws with belonging insert nuts to make a tight grip to the belt so it won't let the belt slip so easy. I made this…
hit up the remix seems to be taken to the next level https://www.printables.com/model/524976-open-front-belt-tension-mod-for-ratrig-vcore-31-en RAT RIG VCORE 3.1 ENCLOSURE AND NON ENCLOSURE BELT TENSIONERS FIND OUT MORE AT THE GIT BELLOW…
Per side you will need: 1 x M5 25mm Screw for the Tensioner screw 2 x M5 20mm Screws and t-nuts for the Horizontal 3030 profile mounts 2 x M6 12mm Screws and t-nuts from the original VCore 3.1 Enclosure 2.0 Front Idler mounts to mount to…
CONSIDER THIS A WORK IN PROGRESS, BUT THERE WILL BE NO UPDATES FOR THIS MODEL IN THE FUTURE. FITS K1MAX ONLY. I recommend to upgrade only if you will be able to return back to stock just in case. I destroyed stock XY joints because of the…
These are a remodel of Rat Rigs belt tensioners from the V-Core 4 hybrid printer. These are specifically designed to work on a a V-Core 3 hybrid. Unlike the V-Core 4 ones, these mount with T-nuts in the extrusions to allow: Fitting…
Tensioners are great tools but they are nothing without a rope. With this model, you can have both in an organized and practical way. You've got two tensioners that you clip onto the main part. What's the result? An ergonomic item that…
The alpaca logo is too big and I prefer the Voron logo. I measured the covers with a caliper, so hopefully they will fit you. I printed them from Devil Design ASA and they fit perfectly.
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN9H Pins version and the Medusa HC mounting. No more glue!
these are for precisely adjusting the tension on your drive belts, they pivot from under the front frame bar various hardware is required m4 bolts, t nut, and hex nut smooth pulley and m3 bolt and nut (perferably a round top bolt they sit…
Made a washer that can take a m4 nut so it does not slip in the inside. its a tight fit but it works well! See below for original tensioner by @Crosslink. https://www.printables.com/model/152451-ender-3-and-ender3-pro-x-y-belt-tensioners
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ These are a direct replacement for the belt tensioners on the EnderXY. The stock tensioners have many issues when running higher speeds/accel such as belts slowly…
Designed to print without supports, and to work with the stock hardware of the CR-10. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 1.2 mm Infill: 50% Category: 3D Printer Parts
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN12H Pins version and the Medusa HC mounting. No more glue!
Slight mod to help improve Seffyr's nice idea, but flawed design.
Hello there. I created a Paracord Spool with Carabiner and Tensioners for everyone, who need practical spool for paracords/ropes :-) I decided and I created this “easy printing” model for everyone who have some paracords and need it every…
i had these belt covers on my ender 5 for the hole time ive had it an around 2 yrs in i had to add a belt tensioner an thats when i discovered it wouldnt work with the belt covers so i made some changes to the cover an got it to work with…
I saw https://www.printables.com/model/550095-elegoo-neptune-3-pro-belt-tensioner-for-toothed-id but did not work for me, different idler. So I made one, easier than modifying a stl file. I use…
I had y-axis issues with my i3 Mega that were fixed by Todd Lowe's tensioner , so when I had similar trouble with my Artist-D and the y-axis was so similar, it seemed like a good place to go. I was half-way done designing it from scratch…
I just got the Turtle Beach VelocityOne Flightstick and find it way too stiff. So I've found some solutions online but none included 3D-printing … so I created these models. They need to be placed under the metal plate which holds the…
The tensioner body for the Voron 2.4 with screw relief holes
personally printed 7 walls %70 infill ABS
Keep your AB drive tensioners parallel and belts running true / centered on the idlers. The rev 1 style AB drive tensioners have the tension screw offset from the idlers which can lead to the idlers not running true with the belt path.…
Update 01/31/2024: tuned the gantry size more added 2020 profile slot guides added some internal holes to force more perimeters (for stiffness) fatter top bearing supports fixed some minor issues with top bearing supports fitting the main…
Added some holes so the nylocks won't make contact with the tensioner containers. Please visit the original page for the pulley holders.
Not very high performance in testing - reccomend metal front tensioners - i.e Funssor hybrid tensioners, much better in application. A QoL upgrade - takes the tensioners out of your toolhead and puts them in front where they are easier to…
Belt tensioners for the German RepRap X400 3D printer Print instructions Category: 3D Printer Parts Summary Belt tensioners for the German RepRap X400 3D printer
This is remix of Beltdriven Tensioner for the Haldis Black knight linear rail kit for the ender 3/S1. The original model works but the belts weren't parallel. I have updated the design to the v3.7 version of KevinAkaSam's belt driven z…
These tensioners just add a bit of clearance for the belts and toolhead no supports are needed
I created this model to anchor the luggage tensioners on the safety bars of my Riese & Müller - Multicharger 2. Safety bars - 4 corners This is the file with all 4 corners. Normally you should use this file if it fits your print area.…
With maps' original component the belt was rubbing against the X gantry, so I placed the bolthole 3 mm lower, so now the belt runs inside the extrusion on the top and below it on the underside so there is no contact between the belt and…
Modified the stock front idlers/tensioners to use 5x15mm pins instead of bolts. Pins are captured when in use with no additional parts, and can still be easily removed when there is no tension on the belts. Use a piece of belt to hold the…
"Aren't you just picking at random in the Creality parts bin?" "Well, Sovol did." Remixed Cornely_Cool's CR-10 parts to fit on my machine.
Motivation The Duender belt tensioners are a little fiddly to assemble. The original Ender3 does not include proper belt tensioners, but the V2 does. (And probably later versions as well.) So why not just re-use them instead of creating…
Designed for a 20x20 profile with a V groove of 5 and 6 mm ZBAITU belt tensioner designed for 6mm slot Print Settings Printer: Monster Rafts: No **Supports:** No Resolution: 0,2 **Infill:** 30 Category: 3D Printing
Designed for a 20x20 profile with a V groove of 5 and 6 mm ZBAITU belt tensioner designed for 6mm slot Category: 3D Printing
I have a X5SA frame with a VZ235 kinematics in 2WD mode (currently satisfied with it) with the motors in the back (using a modified version of the AWD mounts; also posted). I was running the front motor mount/tensioner assembly with…
Tiny but helpful thing which distributes the tension (which is caused by the tension screw) on the whole cross sectional area of the belt. So the belt is not only strained on the very little spot where the screw is placed. Category: 3D…
Three-hole runners that tighten and lock tent guy lines, tarp lines, washing lines, hammock ridge lines and plant ties without knots: thread the line through, loop it round the peg and slide the runner to tension it; friction holds it.…
Six T-section tent pegs with a solid head to hammer and a hook notch for the guy line, plus six three-hole guy line tensioners. Good spares for festivals, the garden and soft ground (use metal pegs in hard or stony ground). DETAILS • 170…
Keep tent guy lines and paracord tangle-free and ready to deploy. This set has one flat cord winder and four classic 3-hole guy-line tensioners. Everything packs flat in your camping kit. Winder features: - U-notches at both ends: wind…
"Aren't you just picking at random in the Creality parts bin?" "Well, Sovol did." Remixed Cornely_Cool's CR-10 parts to fit on my machine.
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN9H Pins version and the Medusa HC mounting. No more glue!
Integrated belt tensioners/Medusa HC mount for the Duender and Medusa HC hotend changer by Sergei Irbis. Replaces the stock tensioner from the MGN12H Pins version and the Medusa HC mounting. No more glue!
A small remix of the front belt tensioners originally prepared by Liam Venter ( see link ). Remix contains just top plates (red part in the attached pictures) , for rest of the parts please visit source design. Note: RHS_packer is a part…
Simple all-metal belt tensioning solution for those looking to remove the tensioners from the toolhead. [beta] these are untested as of publishing, I haven't received the plates to test yet. The slot for the 60mm bolt may need to be filed…
Print in the given orientation, No special settings required.
![[beta] V-Core 3.1 Metal Front Tensioners](https://media.printables.com/media/prints/545108/images/4384140_e1d801b5-93a2-4ecb-9108-c38e3c052acb/profile.png)
