Counting matching models…
This model was featured on The 3D Printing Nerd We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon kit card, I thought I would try to design a tie interceptor to go with the other…
This is a fully customizable modular cube that is wall mounted, you can print any number of module and interconnect each other to create anything you want. With it's many differents modules you can change plates to suit your needs, from…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
Original part : https://www.thingiverse.com/thing:103582/files
I designed these three fidgets that are interchangeable. Let me know if you would like any other shapes. NON-COMMERCIAL USE ONLY
This Most Popular Clay Texture Roller Set includes a collection of highly requested and widely used patterns. The 4 cm wide rollers allow you to cover larger surfaces quickly and create consistent textures with ease. Designed for easy…
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS Lego Technic Police…
I've seen this Spiderman PS4 faceshell on thingiverse and I wasn't sure if HappyMoon had uploaded it to Printables yet or not so I figured I would share it with this community in case anyone hadn't seen it. It looks like an awesome…
Replica of a TIE/IN interceptor at 1:270 scale. Its 42.4mm long, 29.9mm wide and 26.6mm tall. For a stand/holder, its compatible with a slanted pin, peg and small base from here . Print instructions Printed at 0.07mm layer height. Rotate…
Intercooler for Crocs. Add 6mm fuel pipes to connectors. Print 2 turbos, and superglue them together. : https://www.printables.com/model/317275-crocs-turbo
Experience the thrill of Imperial starfighter dominance with this meticulously detailed 3D printable TIE Interceptor model that brings the galaxy's most feared interceptor right to your desk. This stunning starfighter replica captures…
A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile. The tiles can be connected together with the included connector to form a pattern of multiple tiles. Connecting the tiles…
Printing: Layer height: 0.10 Supports: Yes Material: PLA, PETG, ABS… I recommend printing the first two layers more slowly. Assembly: I recommend using super glue for more stability 1.Connect the wingtips to the connector 2.Connect the…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
I am reuploading this so others can find it on Printables. All pictures on this model are the ones that I personally printed. I have also made a slightly larger version of the headband as the original was too tight for my head. You can…
First of all: If you like this model, please klick on like to help me earn some Prusameter. Thanks. The special thing about this Fidget-Cube in comparison to similar constructions is: the cubes can be printed individually, in different…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Overview I had downloaded and printed some of the switches for brio as my son has several powered trains that need a guide. The issue with those is that the stick that comes out of the side blocks cars or ships on his playset and there…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
Simple designed models of the Darth Vader Advanced Tie Fighter and Tie Interceptor ships as seen in original Star Wars trilogy movies. I placed the loop for the ornament a little back on the Vader Tie Fighter for better balancing. They…
This is my model of X-301 Interceptor from Stargate. It has a stand and is done in scale with my F-302 model. The only feature is the missiles that can be detached. You can find the assembly video here. Category: Vehicles
All I did is take what Prusa provided on Printables, and made it longer, that's all. I've found that I lacked places to hold 2kg spools while working. Now I don't. If someone else find this useful, happy printing! Don't throw short…
Summary This is a customizable and interchangeable Mickey Mouse headband and ears. The "bases" get superglued to a store-bought headband of your choosing. The "ears" are held to the base using 6x3mm magnets. All 3D models were created in…
Quick 3D model of TIV 1 I made 3D Printable, the mesonet is removeable so if you want it or not.
Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
A small battery cover for my caliper Print instructions I print this one in PETG with the flat surface on the build plate without support (they were too hard to remove and I broke the small legs). Instead I trimmed the legs with an exacto…
Stop your bottles from rolling around in your fridge or shelf and be able to stack bottles on top :-) 4 versions available with a diferent radius: 1,5 litre soda bottle normal wine bottle soda can regular beer bottle All versions…
I have two drones that I currently don't use, just sitting there collecting dust and thought to myself, why not put them on a cool looking pedestal so I can place them on my shelf and show them off to my visitors :D Looked around Amazon…
Generic half pan dimensions: 19 x 16 x 9.5mm Winsor and Newton variant dimensions: 19 x 15.75 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other…
Overview Building on a previous design (Brio - Mechanical (Geared) Interchange/Switch - M1 Track) https://www.prusaprinters.org/prints/59955-brio-mechanical-geared-interchangeswitch-m1-track I wanted to see if I could shrink the design…
I needed mini vice mainly for holding small PCBs while soldering but did not like existing ones for different reasons so as usual for me I designed my version. I made it with interchangeable jaws in mind so you can print them in…
Tie Interceptor 3d model Star Wars
Eta-2 Actis -class light interceptor 3D printable model of a starship from the Star Wars saga After ordering a 3D model of the Razor Crest starship , I started to enjoy modeling and created a new model of the Eta-2 Actis . I hope Star…
Experience the versatility of our 3D-printed lamp with four interchangeable lampshades that can be swapped out in an instant. This modern lamp is compatible with E27 sockets, allowing you to customize the ambiance of your space at any…
Update 12.23 Version 2 Update ( fixed fused hinge error during slicing) --------------------------------------------------------------------------------------- What will you put in the secret compartment? The hinge and finger toggle are…
I couldn’t believe this wasn’t already an available model! Here’s my version of the Tags and Crests found in Digimon Adventure, so you too can relive your dreams of being a Digidestined. The tag is approximately 53mm tall, perfect for a…
Here is an improved version of my Truchet Pattern Chainmail Fabric. It uses a chainmail-style structure that connects all the pieces together, allowing it to move and behave like fabric while still having the look and character of armour.…
This is a customizable watch display and organizer to keep your watches safe and easily accessible. The watch stand set is composed of two parts: the watch stands themselves and the socketed base. The base intentionally stores the watches…
Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
This is a model fighter jet I designed. This will require supports if you want to print it in one piece, although is still pretty quick to print. It is inspired by many real fighter jets/aircraft but this one is completely original.
The headband, created by NX3CREATIONSLLC, was too small for my head. I am a larger person and needed something bigger. This is a remix that adds 10mm in-between the ear mounts. I have also added some spikes on the lower portion of the…
About the MiG-25 Foxbat The Mikoyan-Gurevich MiG-25 is a supersonic interceptor and reconnaissance aircraft that is among the fastest military aircraft to enter service. Designed by the Soviet Union's Mikoyan-Gurevich bureau. The first…
A portable watercolor and mixing palette kit that can be secured to your sketchbook using foldback clips (up to 40 mm). It allows for different mounting layouts, snaping in place and closing using magnets (Ø 5mm x 2mm). Perfect for urban…
Create beautiful textures effortlessly with this interchangeable clay texture roller set . This 3D printable system includes multiple pattern rollers and a comfortable handle, allowing you to quickly switch between different designs.…
Im back with another interceptor model! This is Titus, a fictional interceptor featured in the movie into the storm. This model was the hardest to make. It took me a whole week to make it. The tinker cad design was so complex It took 20…
Wall mount pieces for Lego set 75382 UCS TIE Interceptor (2024) 2-piece set to mount Lego set to the wall. Wall mount is angled in a way to show the Interceptor in slightly tilted down position, mainly as its mounted above head in its…
Update: I have uploaded 2 new versions of the pommel top after feedback. The regular pommel top is 0.2mm bigger diameter then the grip and the looser version is 0.4mm larger. Yet another master sword. I know. This one was a fun project to…
Here's the wall intercom kit I put on thingiverse years ago and had someone interested in having it updated so here it is. Update October 7 2025 - Added a simple stand for propping it up on a shelf.
Get ready for winter with this stunning lantern, designed to brighten up any space with a warm, festive glow. With a modular design, this lantern can be printed in a variety of colors, allowing you to create a unique look. Each part is…
Remade the SHADO Interceptor. Added cockpit framing detail, radiator and proper cannons in the nose. V2.5 - Improved radiators V3 - Improved Skids (so it doesn't look like a Santa sleigh) Note: SHADO never knew how to make a fighter so…
Hex Sockets Mastercraft Hex - 3/8 inch drive for Metric Infill: 15% Resolution: 0.2 Filament: PLA OR PET-G
I love going on road trips in my Ioniq 5. However, I always face the challenge of not having a good place to store trash during my travels. So, sketched this, fits perfect in the centerconsole. I printed with 0.6mm nozzle and 0.48mm layer…
Sizing: Designed to fit Prusa MINI+ print bed, so parts are made with 17 cm x 17 cm in mind, hence the back being broken into two parts. Pins are included to connect the two back pieces, with glue. "Full" back pieces are included for…
This is a folding, print in place watercolor palette. I developed this because I wanted a tray with fewer paint wells and more mixing spots than any of the trays on Amazon Let me know in the comments how it works for you and if there's…
Custom saber hilt ready for electronics and blade. This fits the LGT core module. Pictured is the LGT Proffie Core and 1" Neopixel blade from Darkwolf Custom. I specifically recommend a 32" blade - normal filaments do not give the hilt…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a collection of blank ears to accompany Disney Interchangeable Headband and Ears . Each blank is at different depths and is perfect for painting a custom creation. Disney Headband Blank 1 - No fill Disney Headband Blank 2 - 2.55mm…
Just remixed to give it some colour
This is a set of blocks that can be used to recreate the TIE Fighter / Interceptor Pilot figure at 500% scale. This figure was included as part of the TIE Interceptor set published in 2006 and again in the Imperial Landing Craft set…
A wing profile to transform the snowflake Tie fighter into a Tie Interceptor. You need the original files to print the body. https://www.prusaprinters.org/prints/91927-snowflake-tie-fighter-kit-card-ornament (thanx fixumdude for the great…
MODEL DETAILS Connector clips for the joint of your wiring where the HeaterCore and extension cables meet. This is not a mandatory part of the installation. You will need 4x cable ties. RECOMMENDED PRINT SETTINGS No support material is…
Not available new, not test printed so no idea if it will fit. Partnumber 46811728
Simple case with lid for 20 half pan water colors and a couple of pencils. Created in OnShape - document is here: https://cad.onshape.com/documents/096698f5602ff8094f2ace0b/w/67410470c2b1b469f3691b6e/e/ac44ae02b019629a8dcda0b6 19-09-2019…
3D Model converted from the game, adapted to 1/64 scale and kitted with various parts from here. Includes dog. Will accept hot wheels medium wheels.Print with supports from build plate. The inside of the car have some supports that have…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
The model is not an exact scale replica of the interceptor drone, but I tried to make it look as close as possible. It is recommended to print the model with a 0.12 - 0.08mm layer height. For the upper body, use the variable layer height…
Xbox Controller Stand with attached Masterchief figure. I printed this without supports but did notice a difficult bridge in Masterchief's helmet brim. Remix from thingiverse mastercheif bust: https://www.thingiverse.com/thing:3555805
Price blocks to price your items in your store, or craft shows or wherever! They are interchangeable and can be adjusted to Dollar Sign or other currencies, number blocks are interchangeable to suit whatever price the items need. Included…
This is a magnetic Mickey Pretzel Ear, that is meant to be interchangeable with others in the series. Settings that I printed at: Prusa MK4 0.15 SPEED 15% Infill I used Overture Silk Copper PLA for this, which looks great; however, I…
3D model of a thargoid interceptor of cyclops/basilisk variant (the geometry of the two is basically the same, they mostly vary in color in-game). Model taken directly from the game. All assets are property of Frontier Developments!! I…
Interchangeable Contours – Multiple shapes and sizes to match any project Built-In Sandpaper Storage in Handle – Swap contours/grits easily for seamless workflow. Ideal for Woodworkers & DIYers – Perfect for furniture making, carving, and…
A template to create cards that you can use to create watercolour swatches. Based on a design my wife described to me. Just trace in the open areas and then apply your watercolour to create a swatch card.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
WHAT IS IT? This is a stamp with interchangeable letters! Designed to be used with standard ink pads, you can use this stamp to mark documents or for art projects. Please forgive the cat hair on my desk in the second photo. I designed…
Standard-sized HALF PANS and WHOLE PANS for your Watercolour Palettes! The walls are thin, so there's less material usage AND you have more room for PAINT! In the photos, you can compare with the pans from Schmincke & White Nights. A…
A sieve with interchangeable screens. Use it to filter whatever you want, but I made it for separating seeds from chaff. Print the sifter body and whatever screen plates you want. The side of the plate that sits on the bed should be…
The Me 262 A-1a Schwalbe was a variant of the Me 262, the world's first operational jet-powered fighter aircraft. It was designed and produced by Messerschmitt in Germany during World War II. The Me 262 A-1a, also known as Schwalbe…
Replacement for the original clip that can be lost or broken. Expensive (costs around USD1 per piece) and frequent not in stock. Can be damaged when removing during front brake maintenance. Takes 7 minutes to print one part. Use 100%…
FLSUN SR ( Super Racer ) six swappable / interchangeable accessories SD card USB holder Tools holder Pliers holder Spatula holder Storage Box (with optional lid) Storage Box Large (with optional lid)
Organize Your interchangeable Slugs – Bowl Smarter, Travel Lighter! This 3D printed Vice IT Thumb Slug Holder is built to hold two interchangeable slugs, keeping them protected and easily accessible whether you're heading to league night…
It includes the Doppler on wheels, Tiv 1-2, and the Dominator 1-3.
Generic full pan dimensions: 30 x 19 x 9.5mm Winsor and Newton variant dimensions: 30 x 19 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other watercolor…
This is a magnetic Mickey Waffle Ear, that is meant to be interchangeable with others in the series. Settings that I printed at: Prusa MK4 0.15 SPEED 15% Infill I used Overture Silk Copper PLA for this, which looks great; however, I would…
Imprimer le dessin dans une couleur (épaisseur 0.3mm) et laisser le dessin sur le plateau pour imprimer la base du modèle dans une autre couleur au même endroit sur le plateau pour créer une incrustation du dessin.
What is ‘fine’ plastic jewelry? Print this design in a couple hours and wear it tonight. It's so easy to make. Lift it off your build plate and put it on. For the charms, use a bit of pressure to snap the oval bail onto the charm, then…
This is a meticulously designed watercolor paint tray tailored for enthusiasts and professionals alike. Crafted for a precise fit, the tray is optimized for the insertion of van Gogh watercolor paints. Key Features: Print-In-Place Hinge:…
With this set you can bring your paintig game to the next level. Create fun and interesting textures on your canvas with this Palette knife. The interchangeable head alowes you to quickly change the shape of the palette knife head and to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
TIE Interceptor. You will need a 300mmx300mm print bed to print the original size. I have provided the SVG file and GIMP project file in case you want to slice it up to whatever you want. Suggestions: Print on glass using concentric…
Interchangeable mix'n'match swivel variants of the DC15 Commando rifle. Ideal for custom figures or cosplay. This release comes with all the parts to make every variant of my Commando DC15 rifle through a mix and match feature and once…
Remixed a smaller version of this excellent watercolor box. Holds 16 standard half pans. Requires 3 large and 3 normal paint trays (STLs included) and 16 standard half pans. Prints OK without supports but settings have to be locked in for…
Print in PETG with 20% infill and 3 walls I recommend using snug supports Imprime en PETg avec 20% de infill et 3 perimètres je recommande d'utiliser des supports Snug
These are very simple slide-in bars for attaching molle system pouches together. The simplest one just slides in and out and can be removed in a hurry. The other two have small hooks on their lower ends which are relatively simple to…
I wasn't a fan of all the supports required from the original model, so I remixed it to improve rigidity, remove supports, and angle the fighter downward. STLs have been exported in the optimum print orientation
Vary hard, so I would really appreciate it if you like'd it.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Transform your old mint tin into a new paint palette with this six color watercolor paint palette insert! It can accommodate six colors and a spot for a sponge. Print at your preferred layer height, no supports required. Plus, the…
PLEASE DO NOT SELL OR CLAIM THAT THIS IS YOUR MODEL!!!! I MADE IT AND IT TOOK ALOT OF EFFORT AND WORK! anyways I really enjoyed modeling this. It taught me a lot about shapes and how to model said shapes. BTW I made this on a Chromebook…
