3,868 models
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
This is largely inspired by https://www.thingiverse.com/thing:5028257 by kageii Features This is a stand that achieves a steeper angle then the original feet, while allowing the thumb cluster to stay at any angle. It can also fold…
Passionate about aeronautics, it was for meunthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model with the double slide and lock…
A pythagorean cup is similar to a regular cup, with the exception that if you fill above a certain height inside the cup, then all of the contents of the cup will be emptied. This is good to teach people not to be greedy ;) It works by…
Apple Pencil Holder Also available for generic pens: CLICK_HERE Save your pencil's tip. Does not put pressure on your pencil's tip through a tapered canal so the pen does not rest on the tip but on the body. Printing: 4 walls 20% ZigZag…
Introducing the "Sewing Tool: Thang and loop pressing bar"! This innovative tool seamlessly combines the precision of the "That Purple Thang" with the functionality of the Loop Pressing Bar . The "That Purple Thang" excels in maneuvering…
Orthanc, Tower of Isengard from the Movie "The Lord of the Rings". It is a decorative Stand for Echo Dot 4th Gen. Suitable Device: Echo Dot 4th Gen: https://amzn.to/3eIkdu4 How-To-Print: Recommended Layer Height: 0,3 mm Support: No…
Mr. Kim Leng Thai Food Flying Restaurant from the 5th Element. or torture test benchy. ?? kimleng3 = basic model without computer aided orientation. (pick your own orientation) kimlengorientationvs = auto oriented with meshmixer for best…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
🇹🇭 ยนดตอนรบสประเทศไทย! Welcome to Thailand! Wat Chiang Man (sometimes written as Wat Chiang Mun ) is a Buddhist temple inside the old city walls and moat of Chiang Mai , in northern Thailand. It was built by King Mengrai in 1297 CE as the…
Printer feet should: Not wobble, be firmly connected to the frame, and support the printer Isolate and eliminate vibrations to improve print quality Dampen noise caused by those vibrations to improve quality of life In addition, if you…
As a part time job I tutor GCSE maths in the UK. One of the key areas we cover are geometry. In most areas in life it will be rare to never need to use this fundamental equation. having an understanding will make using it so much easier.…
This cup behaves normally until it you fill it almost to the top. Then it will automatically empty itself completely. Inspired by a documentary about the ancient Greeks where this Pythagoras Cup was displayed, I wanted to 3D print a…
Thalia the Muse of Comedy, Lightheartedness, and idyllic poetry
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
Angled speaker stand for Razer Leviathan v2. Desing of the stand goes well with the design of the speker. RGB is not restricted. + 25mm more room for your cables!
A print model of the philosopher Pythagoras. Includes a base with his name. One of my first 3d prints; any feedback is appreciated!
Wikipedia says everything: https://en.wikipedia.org/wiki/Pythagorean_cup hyperlapse video (speed*8)
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
This is a revision of an old design I made; this one is a little smaller and prints as one piece. Has 10 standard USB sockets. Print instructions Support is needed everywhere. Use tweezers to take out the little bits of support found in…
Magnet based on the F-117 Nighthawk. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
Reason for redraw Checked with SO who will use it most. She requested it to clamp to the box, so when you pick it up for closer inspection it won't fall off. The slit has two protrusions which creates a distance slightly less than the…
This card is similar to others I have published, except it is a Thank You note. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be unique to the recipient. The hinge needs to be…
These parts slide together and snap on to the top of Z-axis. Holds all of the parts you'll need for your Prusa Mini! Print instructions .25mm layer height Supports on at 30 degrees or less
These filament samples are compact, simple and require no modification to print. All you have to do is to slice them with the correct settings for your filament. The sample is 5 by 5cm and has exactly the same dimensions as a color slide.…
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
This is probably the simplest turkey you will find out there to 3d print. Make sure you print with supports. But once you print it, you'll see why i made it. You might laugh a little too! Please enjoy!
I wanted a photo frame with a retro vibe (but the ability to use standard photos). I've included four versions: Standard polaroid size window (3.108 × 3.024 inches): Jumbo Model (4.33in x 4.39 inches) 4x6 inch version 5x7 inch version
The video below shows the Z-axis motor visualizer in action: The rotating part of the visualizer has a glued on 8x3mm neodymium magnet to attach it to the Z-axis of the printer. The square block holding the cross wires in place fits on…
I created a Nighthawk Formula Car Concept for everyone, who like Formula 1, Cars, Stealth technologies and Concepts :-) I took and remodeled two great original models by K987 and CgManuil from Thingiverse and Printables and made it into a…
A handy size case to carry your medicine and vitamins. Slips into pocket or ladies purse. The lid screws on to keep everything secure. No spilling into pockets, etc. It easily scaled to your individual size. There is even a model with two…
Element and Round tracker for Gloomhaven, Frosthaven and Jaws of the Lion. Skull round marker was remixed from sceptic-skull Board and tokens have 1x10 mm magnets embedded in them
This model is the first version. See improved version here: https://www.printables.com/model/421859-magnetic-frosthavengloomhaven-standees-second-edit Second edition features HP counter from both sides and other improvements - see the…
Just to keep them together.
The models for temperature towers all seem to be large and long prints. This is something that will likely just be thrown away, and no one (I don't, I assume everyone is just like me) wants to wait hours for a tower to print to find the…
Pythagorean Theorem. My version of the Pythagorean Theorem demonstration model. I made it as a gift, so I used two very specific filaments to give it the beautiful look of plywood. I made the filament changes manually, with 14 layers of 1…
Ständer für Handschuhe, dadurch lassen sich gerade die Torwarthandschuhe sehr gut trocknen und lüften!
Bitte LED Teelichter verwenden Please use LED tea lights
Ich wollte ein Teelicht mit 38mm Durchmesser in das Modell “Snowglobe Votive Ornament - Winter Cabin” (https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin) einsetzen und habe dafür diesen Halter gedruckt, der…
We got a free aerator in the mail. Pretty decent and lets you pulse the thing with a springy button switch on the top. Anyways, it didn't come with a stand and laying it down on it's side was a big NO-GO. Spent an hour in Fusion 360 to…
Der originale Filament-Halter für den Prusa MK3/4 ist so breit, dass verschiedene Spulen Platz haben. Schmale Spulen, wie die 1kg-Spule von Prusa, taumeln auf dem Halter. Dies führt bei vollen Spulen oft zum Abspringen des Filaments.…
stützen erforderlich für die ohren, und langsam drucken support required for the ears, and slowly print NUR FÜR LED TEELICHTER ONLY FOR LED TEALIGHTS
This is a remix that uses the scad file provided but the original designer to make a template for every Frosthaven class. I added the Gcode for a .25 nozzle and noted the color I use for each character in the filename. note some…
Prints at a 45 degree angle in one piece with support to the bed only, or in two pieces that can be glued together. Separate and full STLs available, along with the gcode I used to print.
Molecular surface representation of the bovine mitochondrial ATP synthase state 1b PDBID 5ARE. The chains were grouped and printed so that the main structural components are visible: F0 in green; F1 in blue; axle in red and stator in…
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
This is a remix of the handy LED lamp clip by CdRsKuLL which you can find here: https://www.prusaprinters.org/prints/1418 Lacking a link, I ordered the wrong LED lamp from eBay and it was too wide to fit the clips. So I modified the STL…
separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…
Now you can wear a staples "that was easy" button on your clothing as a button
A hex stand for flying units in Gloomhaven / Frosthaven. Made so they can fly above printed terrain pieces. You can stretch out the feet if you want a taller stand. There is a straight stand so the feet fix in a hex, and an angled stand…
A handle for a 6.3 mm Hex Shaft. Intended to assist with nozzle changes. Design considerations: Accept a standard 6.3 mm Hex Shaft. Use M3 bolts and nuts to secure shaft (likely in spares from printer build and mainenence). Large enough…
Make your sweet treats even more heartfelt with this "Thank You" Fondant Stamp ! This digital STL file is perfect for creating professional-looking messages on cakes, cupcakes, cookies, and other baked goods. Designed for 3D printing, it…
I created a plate to hold the magnetic standees for frosthaven from Michal Stříž design: https://www.printables.com/de/model/369265-perfect-gloomhavenfrosthaven-standee-set-with-magn It fits exactly the same amount of standees as…
Umbrella shaped, heavy duty bag holder. Up to three kilograms tested. Works as a free hanger on rails and ledges(?) but especially with office and coffee tables, and on most bar counters (4cm are tested). You can also hang up your jacket…
This is a fidget spinner that you attach to some kind of base with a single screw. It consists of several 3D printed pieces, modified ball bearing and possibly several washers for M5 bolts. The modified ball bearing in question is the 608…
Magnet based on the F-117 Nighthawk. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen
"That was then, this is now". It's not only the name of a novel by S. E. Hinton from 1971 and a song but also a good motto to live by. Print instructions Make use of the color print functionality or you will not be able to read it…
This a key chain to hide your valuable goods. For the best results Print vertically, and beside that just use your normal print settings.
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
This is a Thank You bookmark for band teachers.
V rámci projektu si studenti zkusí vytvořit model s pomocí něhož budou schopni provést důkaz a samotnou demonstraci Pythagorovy věty. Žáci sami vytvoří modely.
I designed this so it can be printed on a multi colour printer with a mmu or multi tool head as that is how I printed it it is at a 0.15 layer height with 15% infill I also printed it face down so you get a better finish i also used pla i…
Prints flat and can be scaled up or down, will curve around a 60mm pot at the current size
Žáci na základě svých znalostí z matematiky vytvoří model Pythagorovy věty.
This adapter fits into the cup holders of a 2025 Volkswagen Tiguan (North American Region) and accommodates a slim can of branded energy drinks (or equivalent 53mm can). Design features This has two alignment holes to fit around the…
The file is a bit messy because I couldn't remove some of the features of the old design from the stl in fusion. Have added the fusion file if anyone wants to give it a go.
Inexpensive “martha tents” (mini greenhouses) common in amateur mycology often have wire shelving that is a bit to big to set a hygrometer on. This fast print hangs the hygrometer/thermometer from the shelving. These hygrometers are…
I bought some small magnets (ø 10 mm, 2 mm height) to secure my airbrush stencils but found that these are so small that my fat fingers can't lift them up with ease. So I made these holders for them and now they are very usable. The…
No need to give that awkward wave in the rear view mirror. Thank the driver behind you with the push of a button. What if you have no choice but to cut into another lane to make the exit ramp? End the potential road rage from the person…
This is a simple little model that works with the Clockwork 2 Extruder for the Stealthburner. I'm using a E3D PZ Probe on my Voron, and wanted to keep everything within the toolhead, since I'm using a Nighthawk 36, the PCB for the…
Recommended to print 2 Halves to get the internal channel. Also recommended to Scale down
In addition to my printer in the enclosure, I also wanted to isolate vibration through the enclosure as well. So I modified the feet for the printer box to accept a 50mm x 50mm square of sorbothane pad. Shopping List Sorbothane Pad…
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
100x160mm sign, with a “Poor Richard's Almanac” quote. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs.
Žáci si vyhledají informace o grafickém důkazu Pythagorovy věty. Vymodelují pravoúhlý trojúhelník o vhodných rozměrech a čtverec, do kterého budou trojúhelníky vkládat. Modely vytisknou.
Pythagorova věta je pro žáky v domácím vzdělávání i ve škole náročná na představivost. Praktická pomůcka, se kterou mohou žáci pracovat jednotlivě i ve skupinách.
Squeeze to open jaw and it will automatically close when let go. Use it for binders, chip bags, or anything that needs organization.
Absolutely love the idea by @LeonH for the monster trays and other card holders. I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).…
A ‘no thanks’ sign designed for the Prusa MMU to fit on a door frame. The sign can be scaled to your requirements, but I would not recommend scaling it any smaller than it currently is, as the text becomes difficult to read. Print face…
Intro I first want to thank Szkandera.Jan (@skandalf_3025793) for their amazing PrintMark model, which sparked the creation of this design! I found their model to be very creative and cool, so I took it one step further. Introducing the…
Express your gratitude with this charming "Thanks for Helping Me Grow" fondant stamp! Designed for 3D printing, this tool makes it easy to add heartfelt messages to cakes, cookies, cupcakes, and more. Ideal for teacher appreciation gifts,…
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
Proudly presented by Zero Effort Studios™ – the global market leader in things nobody asked for, designed in five minutes and regretted forever. Why did humanity split the atom? Why did we land on the moon? Why do we keep inventing smart…
Lens hood alternative for Voigtlander 50mm APO-Lanthar VM (Leica M mount) https://www.voigtlaender.de/lenses/vm/50-mm-120-apo-lanthar-aspherical/ FIlament - PLA (can be also ABS/ASA) Infill - 50% (to be strong enough) Layer - 0.2 mm is OK…
I had to print a new lid for the ordered gas can. The one that came with the can was just broken and unusable. Also a bit dangerous to ship it like that if you aks me. I designed the lid myself and really just tried to copy the original…
Žáci vymodelují pravoúhlý trojúhelník a 50 čtverců. Následně vše vytisknou a naskládají čtverce tak, aby z nich sestavili vždy čtverec na každé straně trojúhelníku. Tím dokážeme platnost Pythag. věty.
print at 15% 0.2mm layer Hight. there are two files, one is already oriented for printing the other one oriented so that you can see how it looks it is small enough to be printed on the prusa mini. no supports required. the inside of the…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default
![[Printer Box] Feet for Sorbothane Dampeners](https://media.printables.com/media/prints/409088/images/3399489_5231780d-fc01-4b4c-b9f6-5fb048f98db0/2023-02-25-11_06_17-photo-google-photos-mozilla-firefox.png)
