Counting matching models…
Polygons with 3d-printed strands as mechanical reinforcements. To introduce stiffness to a polygonal frame multiple triangles are inscribed into the shape, changing rotation with z-height. The triangles themselves are strands of filament…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
I made this mod since I recognized, that raising the print speed on my Ender 3 S1 Pro caused vibrations, especially on the Y-Axis. All you need to buy are 2 x 50 cm M10 threaded bar (or 1m and saw it) and 8 nuts (also M10). Maybe some Loc…
I no longer post to printables. All my new stuff for the LifeCard can be found here: https://makerworld.com/collections/29084885
After completing the Mini Base Upgrade, I noticed the left side of my X-axis was lower than the right. This print is an attempt to both explain and correct that misalignment. While the Mini has the anti-vibration pads placed directly…
When I assembled my Original Prusa Enclosure and used it for the first time, I was a bit surprised at the volume coming from the doors vibrating. In general, the doors were very wobbly. The remedy was these reinforcements I designed,…
This is a mod of my own "Stiffeners for Original Prusa Enclosure doors". User @js500 asked in a comment for a remix of my stiffening elements with the (great!) "Prusa Enclosure Lift-off Door Hinge" by @Heyus_277343 . I didn't know about…
Enhance printer stability with precision engineering. Share feedback for ongoing improvements. Stay tuned for more.
(DE) Set von einfachen, stabilen 90° Winkeln. Bohrungen mit Kegelsenkungen. Versteifungsrippe in der Winkelecke. Vielfacher Verwendungszweck. Schnell und leicht zu drucken. (EN) Set of simple, sturdy 90° angles. Countersunk holes.…
If you print at heigher speeds, the frame can start flexing a bit, potentially causing slight problems like uneven layer heights. But more important, it just looks freaking nice! For the full set, it takes 12 braces, each taking around…
I had been selling these on ebay, the ear is for a non-broken coil. Most brands of coils will have broken ears at some time why not protect yours
A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a credit-card sized version that holds 6 collar stiffeners. There's also a mini x2 version here. Key…
Made to fit 4x5 large format camera by Kevin Valverde: https://www.printables.com/model/250649-4x5-large-format-camera Film side 155mm, lens side 100mm Print at Z height of 0.4mm
This is an upgrade for the 3D printed table loom that you can download here: Etsy The Dobby Ugrade is available here: Dobby You can find more information on my website: FraensEngineering.com Here is my video: 3D Printed Table Loom The M6…
When fitted with the internal spool and side panel hinge kit the front edges of the panel often do not stay well seated. This requires the use of screws or this model printed in a very stiff material. The holes on either end are slightly…
A basic brace for the TronXY X5SA series (or any printer using 20mm extruded aluminium for the frame). Mount in a corner and use tslot nuts and screws to secure. Ideally you should choose to print "with support touching buiold plate…
A simple remix of the upper parts with the creality text removed to save on print times and filament
A stiffening square that mounts on the interior corner of a Kallax so it sways less when you put a 3-D printer on top. Holes have clearance for a #8 wood screw. The part does have an orientation as the vertical planks are slightly…
A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a mini version that holds 2 collar stiffeners. There's also a larger credit card sized x6 version…
I am a Commercial Hvac installer and use my hand tools daily. No matter what bag you buy the pockets tend to be loose (for good reason) but since i know exactly how my bag is layed out i decided to make these pocket stiffeners. Now all of…
…If you don't feel like springing for a coffee, please at least be sure to hit like & post a make, I'd love to see your prints! Print it & slip it in & tape it up!! Be sure to slide the stiffener into the hotbed side of the cable sleeve…
This bracket adds structural rigidity to the inside corner of a structure made of 20mmx20mm t-slot extrusion. The bracket is used for corners that have two members butting perpendicularly into one other frame member. This specific design…
This is a stiffening bracket for the IKEA RIGGA clothing rack. The joint where the vertical posts meet the horizontal cross bar is not the most rigid. Over time, my rack has developed a lean to one side. I decided to create a stiffener…
Small grids are super useful for organizing stuff in moving boxes, closets, cabinets, drawers and so on. But 3d printing big ones would take a lot of time and filament, and require you to have a huge printer. Luckily cardboard exists and…
I made this to prevent my bucket from collapsing under a vacuum while blocking the end of the hose while using the Oneida low profile cyclone and a 5 gallon bucket. Scale to fit your exact bucket. Mine was 11" and I beat it into place for…
Was annoyed at how the Atlas Headrest has too much play side to side. This tiny 5g print will remove lots of play between the pieces. It's very low profile and barely visible. Prints flat with no supports, then flexes into place during…
Performance Kit for SR-P Lite but 3d printable. Comes with a manual
The second and third generations of Dacia Duster (Renault Duster) lack seat belt stiffeners on the back seats, and because of that the buckle is hiding in the seat when fastening the belt. Those stiffeners eliminate this problem. I…
my printed base was extremely wobbly and unstable so I designed these. it uses 1/2:" OR 12mm rods to stabilize the base. I used pla but petg or abs should work fine. layer height shouldn't matter much and infill is good at 15-20% it uses…
I created three custom corner frame brace stiffener designs for the Voron 2.4 (and other printers using 2020 extrusion), since I couldn’t find correctly sized braces. • Corner brace 35mm brace → rear wall, print 4× • Corner brace 35mm…
Scotch Tape Dispenser Stiffener This part will transform a flimsy, unusable Scotch tape dispenser into a very usable piece. This part fits half inch tape. Pictures show dimensions of the dispenser that fits. The design is printed without…
a low cost way to build a light blocking tube on the 114 hadley telescope 3 rings are included, one with no attachment mechanism, one that simply clips onto an already built hadley, and one that uses the same nut and screw design as the…
Creality Ender 3 V3 KE & SE - Stiffener Arms The posts are made of a 10x10x380 mm square tube purchased from a hardware store and shrink-wrapped with a 12.7 mm shrink wrap. The shrink wrap should be cut slightly longer, at 385 mm, as it…
This is a simple leg support to help improve the rigidity of the lack enclosure. After adding drawers to the front of the enclosure I still wanted to add simple stiffeners to the front legs so I quickly designed some. The holes are…
Remixed to have screw holes. I also included a short version for a quicker print / a different look. You will need M5 x 30mm hex screw and 4 washers (file included). The washers may need to be scaled up in the slicer a bit. I had to shave…
This project provides the liner pieces for DIY folio cases for the Supernote Nomad from Ratta. See Ratta's guide for DIY folio cases here:…
The normal-size bracers for the frame are way too big for the Voron 2.4. So I designed super rigid and robust braces that were small enough to fit in all the awkward areas of the Voron 2.4 frame without conflicting with any other…
This is meant to make the Y axis rails of the X-Carve stiffer by providing a tie between the rail and the table the machine is attached to. There are two sets of pieces, 4 brackets which tie into the side waste board mounting holes and…
These are simple shirt stiffeners Print Option: Bambu Lab PLA 15% Infill If you have any questions, feel free to ask.
My pocket square kept slipping down into my pocket, and they need to be folded just so to sit at the perfect height out of your pocket for the right look. Enter the solution…. This is a printable stiffener that you fold your handkerchief…
Model must be printed updside down, as illustrated on picture, in PLA or more robust material. Remember the Prusa recommendation for printing parameters : “Increasing model strength The strength of a model is mostly defined by the number…
I wanted additional stiffening of the frame in the Y direction. Since the x5sa pro has the linear profiles, I had to create something new for this. The bracing can of course also be used on the corners with v slot profiles. Instead of the…
QIDI Q1 pro is a good printer but the spool holder is really too flimsy. Maybe, one day, I will change the whole system but right now, I designed a very simple stiffener that really reduces the amount of vibrations and flexing of the arm.…
I went online to check the pricing of these plastic parts and could not believe my eyes when I saw a few titanium bolts were lumped in with these plastic bits and it would cost me an arm and a leg. So I decided to model and print these…
This is my remix of the amazing Stiffening Lift-Off Door Hinges for Original Prusa Enclosure to allow for compatibility with the Mechanical Lock kit. The primary issue is that the Mechanical Lock kit works by having the right hand door…
My quickdraw keepers for Wild Country Helium quickdraws wore out and after a while I realized that I can just design and print some replacements. I designed it in Fusion360 with adjustable parameters so they should fit other carabiner and…
I was a little unhappy at the somewhat sloppy servo saver on my Arrma Fireteam, and the design of the bellcrank prevents you from simply tightening it. Thus, I made these spacers which fit between the factory metal washers and drastically…
Front and back stiffener for A5 sized notebook or binder. 1.5mm Thick. Change top surface pattern to Hilbert Curve for fancy effect and texture.
This helps stiffen up silicon rod ice trays. Its a customiser object, but stl is provided with the default values shown below: / Tray Holder Spec / tray_holder_thickness = 1;// Thickness of this object tray_holder_cell_count = 7; //…
EnXLosure bottom_bl and bottom_br stiffened parts to minimize flex while printing
One of the problems with tuning the Ender 3 is the limited stiffness of the frame, which limits the print speed when using the Direct Extruder. To solve this problem, my friend suggested the idea of spacers for the frame, you can…
This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Print instructions Category: Machine Tools Summary This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Per pair, you need: m3 x…
A remix of the stiffened polygon by alecs.form. It should print at 100% size; you could increase xy_size_compensation (0.1 will work) in order to reduce the print size.
My Transvideo Cinemonitor died, so I created this bracket to fit the TvLogic F7H on the M1 monitor rods. Print with supports, and high infill level. Use the original rods, tilt bracket and 3x screws The yoke side tilt bearings might need…
A stiffener to improve the stiffness of the Tamiya TT01 & TT02 rear body holder.
This is a simple model to help stiffen the Z axis and guide filament cleanly on an Ender 3 V2 printer. It may work on a regular Ender 3, but I am not sure as I do not own one. Assembly Lightly tap the bearing into the larger hole of the…
- Still working on my Y axis, I'll probably come out with a better solution in the near future - Similar to the angled brackets one can buy from places like Aliexpress, but adapted to secure the Y axis 2020 extrusion to the main 4040…
Shirt Collar Stiffener for keeping those collars straight and stiff - 60mm long x 10mm wide x 1.5mm thick Hexified for "pizazz" printed in generic white PLA
These are press-fit replacements for the clear plastic pieces that fit into the aluminum extrusions at the back of some Fisher & Paykel manufactured (including DCS branded) fridges' shelves. They are equivalents to Fisher & Paykel part…
I wanted to set up a Christmas train on my carpet with Kato Unitrack. Every time the train rolled over one of the joints, the track bent down which can cause scraping and derailment of pilot wheels. I have decided to design the "carpet…
I installed the Stiffening Lift Off Door Hinges for the Original Prusa Enclosure and loved them. However, when my Mechanical Lock kit arrived, I realized that it wouldn't work well. The mechanical lock relies on tabs on the door holder to…
This is for stiffening the Y-Axis of your X-Carve. Per stiffener, you need: 2x m5 x 8 mm button hex screw ( https://s.click.aliexpress.com/e/\_d8YF8cV ) 2x m5 t-nut ( https://s.click.aliexpress.com/e/\_dSRSU1X ) OR drop-in t-nut (…
Used to keep closet knobs from rotating. We had several closet doors installed that are hollow core. The knobs, properly installed, could not find adequate purchase on the door surface and would rotate. Tightening the screw hardware had…
The IKEA MALM is a bed with integrated drawers, whose front sadly has a tendency to break off, especially with heavily loaded drawers. The first piece of this kit is an L-bracket designed to be mounted inside the drawer on both sides,…
I printed with 60% infill. Took me several tries, maybe do to Z drift. Summary These parts were made to reduce the vibrations caused by the height of the printer, and to stiffen the frame, even a little bit in the x- axis. Easy assembly…
Designed in two parts which can be screwed together with four M3 countersunk screws. Thread directly in PLA, without extra thread insert. Material required 8x M3 countersunk screw CAD Model…
side supports for 3018 cnc machine with the intent of having send cut send, pictured are 1/4" aluminum
I wanted to make my plate carrier a bit more stiff, so I made this. Nothing special, but can be useful.
Printing may require some light internal supports. They can be a bit of a nuicance to remove, but it's ok. Fitting the tape dispenser into the reinforcement shell is also quite a tight fit and requires maneouvering the two parts inside of…
I was sorting through files on an old hard drive and found stiffening bracket model that I made in 2016 for IKEA RIGGA. you need to print one part twice Installation on hangers is quite simple, just fix it with ties In my photos the…
To stiffen my wobbly wooden shelf I designed this bracket. To be printed as Laying down “L” for more stiffness. Increase outer walls instead of infill to make it more stable.
Like most nerf stock attachment point to stock connection is always a little wobbly. The Ultra Amp/Focus is NO exception. I have designed a custom shim to not only help remove slop but also fill in the negative space around the back of…
Update: Also works with the Trackit SR Also look at my other designs for the Trackit, like the scanner hanger or powerbank mount! This design was created to eliminate the issue that the tripod legs don't lock for further extension to the…
Tired of weak and floppy Strike signs? Or any other sign composed of paper stapled to wooden lath strips? These stiffeners put some backbone into your strike signs and help them to last longer. Remember, your Strike sign is what separates…
I originally designed this to add a 28BYJ to motorise my hadley but it didnt really give enough torque. I decided to upload it anyway as it stiffens the two legs a bit (I made my mount out of wooden dowels; not a brilliant choice!). If…
I made Tables for my Printer with 4040 profiles. But the vibrations are a litlle bit tricky. So i create this braces, and it works very Good :-) Print with PETG, 3 walls and 20% infill. If you want support me, buy me an coffee :-)…
This is a number of piece parts needed to create a frame stiffener for a customized Ender 3 type printer. This design was done for a printer with 800mm vertical frame pieces. If you want to use this on a different vertical height, then…
The A5 is a pretty good printer afterall. A lot of good points and of course some not so good. For me the first one one is the stiffness of the Z grantry. That's less than what we can find on a CR10 or a Tevo tornado and other clones by…
Box for baking ingredients like baking powder, vanilla sugar, yeast, baking soda, cream stiffener
Picking the hobby back up again after a few years, I noticed that my dew shield wouldn't stay round so I decided to print a simple stiffener ring to make sure it held its shape. As a bonus, I designed in a small lip so the original…
Magnetic stiffeners to eliminate vibrations using IKEA LACK tables as a stand for 3D printers. Print instructions IKEA Lack tables are popular as stands for Prusa printers but the high COG together with non-rigid and lightweight…
These stiffeners may be used liberally around the frame of a 3d printer or other CNC device, they help to reduce flexing. The sizing is appropriate for OpenBuilds-style extrusions, with M5 hardware and t-nuts.
This is a simple stiffener for the stackable containers from the "Action" store. When the containers are too heavy, the top box will sink into the bottom container as the walls are pushed outwards by the weight. This stiffener prevents…
I recall seeing these hub stiffeners being sold by trek/ bontrager but now I cant find them, so I made my own. Longer on goes on hub side with disc brake. Increases stiffness by increasing hub face/ fork face contact area from 22 to 34mm.…
Made the upper mounts shorter and corrected the hole positioning. Also made it printable side ways by making holes oval for compensating for layers. See slicer photo.
Next Level Racing F1GT simulator cockpit stiffening kit — designed to reinforce the two legs supporting the wheel plate. I didn’t have a long M8 bolt on hand, so I designed an expansion bolt that works with a wood screw instead. You can…
Cable Stiffener (protector) for Diode laser with 8mm Air Assist hose guide. I made it for my 20W Foxalien Laser. The model will work with many other lasers but check dimensions before printing.
Note this works well on my Anet A8 from 2016. Since then new versions and clones from the Anet A8 have surfaced which may not be compatible with this thing. Please make sure before printing that the part lines up with your printer…
When too much weight is stored in these sorting bins of the “Action” store, the walls are pushed outwards and the bins collapse. This even stiffer stiffener, prevents the bins to collapse; shown as the orange stiffener between the top 2…
This is a remix of JFEDORs Hitbox-layout fightstick. This one has a stiffened bottom lid with mounting brackets for a Raspberry Pi Pico. This is the 218mm version.
Another request from my wife. She loves bags but this one was losing its shape when worn. After a few iterations, this one worked well. It could be printed in one piece if preferred. Printed in Elegoo PLA. Spine - 0.25mm layers, 15%…
A basic brace for the TronXY X5SA series (or any printer using 20mm extruded aluminium for the frame). Mount in a corner and use tslot nuts and screws to secure. Ideally you should choose to print "with support touching buiold plate…
If you use a enclosure for your prusa MK3 you should print a part to improve rigidity, that is drop after the removing of the PSU. This lattice part can be screwed directly into holes already in the 3D printer with M3 screws.
Needed a stiffener for a pretty big HSW shelf, so... It is totally supportless print. There are a basic option, and a hot glue/double sided tape option aswell, if you feel that basic is not enough.
Topdeck Stiffener that repaces the original topdeck bridge if you cut it. Useful if you don't have many spares. Printed with PLA, 0.4mm nozzle, 0.2mm layer height and 100% infill.
This is a further modification after increasing Z height of the printer , therefore without changes it is not compatible with unmodified MK2 . I printed with PETG, but PLA would probably work too. Recommended: 5 or more perimeters.…
My K70 keyboard wrist support started to fail so I made this stiffener to help it out.
No supports need. Top part stiffening on the wall
Loudspeaker stiffener 90mm was made for a Citroën DS 1974. side panels are made of cardboard. The speaker no longer stayed in the cardboard. With the help of this piece, it stays in place
![Scotch Tape Dispenser Stiffener for 0.75 inch tape (Magic brand UK/EU product) [19 mm]](https://media.printables.com/media/prints/759128/images/5919321_02332be6-152e-4fbd-adf5-1160dfcc776b_16fc27b0-6883-435b-a695-fb3e6ac5c414/20240210_130423.jpg)
