Counting matching models…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Este es un test de retracciones muy sencillo en el que se intentan probar distintas situaciones y distancias. Además, si el logo de Control3D no sale, puede ser indicativo de tener las retracciones altas Abriiiiiiiiiizos Te dejo por aquí…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Retraction test I use for filament and printer tuning
UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. To show support please like my designs. :P Time-lapse print video : https://youtu.be/SaA_DnNp9xM Category: Sculptures If you want to customize your guitar,…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
I made this model for testing my retraction settings. I made a video about this on my Youtube channel: https://youtu.be/ed3zEa4WLTo Category: 3D Printing Tests
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
You can now buy the kits and parts at OG star tech. Meet OG Star tracker - The ultimate diy star tracker DIY – Build Your Own Tracker ! So, you want to build your own tracker. Then you are at the right place. OG star tracker is a perfect…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…
Let me present you my new abstract vase. I designed it to be satisfying to look at, have a nice reflections in sun and to be easy to print. I take about 2 and half hour to print it with 0.4 mm noozle and 0.2 mm layer height. Feel free to…
Introduction: The dice case is fully 3D printed, no supports are needed. You need to glue the D&D letters in and a few letters in the inside and the rollsurface as well. The reason is only to achieve some nice multicoloured effects.…
If you would like to buy a set of these laser cut from acrylic feel free to contact me via [email protected] I've modeled the track outlines for every circuit Formula 1 will go to for the 2026 season Edit 1/9/2018 I fixed the scale for…
This is all the 3d printed LEGO® tracks following the L-Gauge train track standard. See YouTube video: Also included is my Solidworks source file so you can modify the length, radius, degree, inner blocks, etc. The models are…
Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…
The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
The new OpenRC Tractor is finally here!! It's been almost two years since I started working on this new MK3 TEA20 project. Now, after hundreds of hours of design, test, print, redesign… it’s finally here and all the hard work has paid…
A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…
1:64 print-in-place kit card with built in supports. Assembly required. Use a pair of flush cutters to separate the parts then assemble Load the black and grey files into the slicer as a single object with multiple parts, and assign color…
Straight track rail from Lego City Train set Print instructions This print requires supports
Update: 26/04/2024: Added a STEP file as much requested. Kirby sucks So do fume extractors Its kinda a no brainer Almost entierly printed aside from the filter and fan Update 1: I forgot to mention, some models of fan will requite around…
Fast (8 mins) retraction test print, including a single-wall cube, and five towers. I had a problem with my extruder's retraction, and needed an object that was fast to print to diagnose the problem. Print instructions 0.4mm nozzle,…
I liked Stephen Albert's retraction test, but wanted something smaller that printed quicker (6-9 minutes rather than 15+). With rounded corners and only a thin strip of plastic connecting the two towers, it reduced the amount of plastic…
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS 🇬🇧 RETRACTION TEST 🇮🇹…
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
No fancy settings, simple design. You can Support me by making a small donation: https://www.paypal.me/sharad1209
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
pequeño archivo para probar retracciones, en 3 tamaños
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
This print requires eight 6x3mm magnets. The smaller version only needs four magnets. (The picture shows the prototype. I noticed that at this size more magnets are better) You must have excellent bed adhesion for this print or it is…
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Attachable Fence for tracks/guides from Festool and Makita for 90 degree rip cuts. One can attach a piece of plywood at the reference edge for a longer fence. Print instructions PLA 0.3mm layer height 3 perimeters 20% infill (gyroid)…
This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to…
Train Tracks - Dragon Railway S - Scale (1/64) 22.5mm size (Standard gauge) The train tracks are a part of the Dragon Railway Recommended Radius : Minimum 400mm Whats included: Straight tracks 50mm 100mm 150mm 200mm 250mm 300mm Curved…
3D Print an amazing modular LED track system with SEAMLESS Diffusers. Say goodbye to visible lines where the tracks meet. These diffusers fit on my Duality LED Track System. I'll show you how I designed, how to 3D print, and install these…
These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:
I improved this model so you can print it without supports all over the place. You only need a line down the middle, as I show in the 3mf file, for the ones without holes, or a small amount around the connectors for the ones with holes.…
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…
🟦 Zetor Crystal 8145 🟦 !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts black 15 by MrHanjak…
This tool allows you to draw lines easily. it is quick to print and handy, and at the same time very useful. scales: 5-29 / 5-49 / 5-100 mm 0.25-1.25 / 0.25-2.5 in versions: -inlier - smoother surface, does not require supports -outlier -…
This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks.…
I don't have enough Hot Wheels track to make a cool stunt course, and the track packs are expensive, so I made my own track system. It is slightly wider than standard Hot Wheels track. The barriers are about the same height and more…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
With this rail track, you layout is not limited by the standard shapes. It's also great to overcome small bumps, such as the edge of a carpet. Compatible with Brio, Ikea Lillabo and Playtive tracks Print-in-place without supports If you…
File for testing retraction
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…
original model from https://www.thingiverse.com/thing:909901
Arduino powered infinitely rotatable and clickable dial that can play/pause your current song or skip to next one on double click. ¨ Read the tutorial:…
Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…
These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high. Comments and suggestions are welcome ! * UPDATE : I uploaded V2 which has the little traction losanges 0.28mm higher for…
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
petit test pour le stringing Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
Set of rails: Strainght in 2x, 1x, ½ and ¼ of standard length. Flexible rail in 1x standard length. Curve in 1x, ½ and ¼ standard length. Two way crossing in 60° and 90° Three way crossing Truntable in 1½ of standard length. Turnout…
Bridge pillar compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: Double height bridge support added! Print…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
Complete redesign of 3DDIY's nifty print-in-place guide rail holder. As I wanted to hang my rails on a garage door, I needed something a bit stronger and more secure. Also wanted to be able to mount these with the rubber strip facing up…
Curved track rail from Lego City Train set Print instructions This print requires supports
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Construction Toys
This is a model of the right gauntlet of the Predator gear. The gauntlet contains a retractable Wrist Blades and Scimitar Blade. I skipped any instruction video as this is rather simple assembly. Note: during the assembly insert the…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
This is the official Ultracryl paints bottle rack. Ultracryl paints are still available on Kickstarter through our “Mail for late pledge registration” button. Its modular and can be built in many ways, also it's LED-Strip capable with a…
This retractable razor blade scraper is an improvement over one I used to have for scraping burnt gunk off a ceramic stove top. Features: No removable cap to get lost. Snaps into three positions: load/unload, safe storage, blade exposed.…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
Fixes Creality CFS retraction issues with small spools that can't reach the bumpers on top of the CFS lid. It's a more comfortable solution to spool rings. Comes in 2 variants with different sizes from 1mm to 10mm. The size is the…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Abstract Woman Face Sculpture If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo All my photos are real and show an actual 3D-printed figure photographed by me. As always! The…
Update 28.11.2024: New better Beta Version with connector. Update 28.04.2024: As requested by a user, i added the first BETA version of the trackholder with connector. Due to the support, the surface is unfortunately not 100% beautiful,…
🔵 Zetor 50 Super 🔵 This tractor is designed to be beautifully assembled. 😇 ■ Video + ❗Tutorial❗ I recommend printing the turn signals, headlights and engine in two colors. ➔ Engine - my height setting is 8.90 ➔ Headlights - my height…
An abstract picture frame, inspired by the sound-guiding wall cladding of the Elbphilharmonie main concert hall in Hamburg (Germany), also dubbed “weiße Haut” / "white skin". The frame's front side makes full use of the 3D printers'…
I searched and printed a lot of different models, but each one had minor or major flaws, so I decided to tweak my own. Print instructions Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the ends I printed on…
Remix of a hot wheels launcher that allows the launcher base to connect to standard hot wheels track. Requires two printed parts and a rubber band. Requires supports. I printed at 0.2 mm height and print came out nice.
General Information The included .3mf file can be opened with the latest PrusaSlicer release ( https://github.com/prusa3d/PrusaSlicer/releases ) and modified for your hardware configuration in order to create retraction tuning gcode that…
This is a fully 3D printed RC tractor featuring 4WD and, even more exciting, a servo-shifted HI-LO transmission. That means you can cruise around in high gear, then shift into low whenever you need extra torque to climb, pull, or power…
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
Easy to print, tought and compact construction. Need a little of support (just for hook - don't use support for holes). (it's the same as https://www.thingiverse.com/thing:3371739 ) Category: Construction Toys
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Hello, This was definitely not my idea, but what was available didn't quite suite my needs so I completely redrew a set of my own with some upgrades and went a bit crazy haha! This design is based on 3x10mm round magnets (Amazon afilliate…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
Calibration de la rétraction avec une tour de rétraction (Fait avec Cura 4.12) La tour de calibration permet de faire plusieurs test de retraction en faisant varier soit la vitesse soit la distance de retraction. La tour se compose d’une…
Hello, here a wobble track for a marble run. Here a Video Here a other Video from someone else on youtube I would be happy to see some makes from you. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
Ever had one of these break? Want more of them or in different colors? These should fit perfectly in any track. Print with supports, 0.2 is fine. I usually print on my Ender 3 Pro using PrusaSlicer, if the tolerances differ on my new…
This end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. Faced down. No supports. Here’s the Festool saw track bumper:…
I wanted a GREAT looking drift track for my home…but didn't want to pay the crazy prices. I decided I was going to create this curb model in different diameters so I could piece together a track however I wanted! Available in 3ft, 5ft,…
Am besten aus PLA drucken. Zusätzlich benötigtes Material: 1 Sechskantschraube M4x10 1 Sechskantmutter (am Besten Selbstsichernd) M4 Bei den GCodes sind Farbwechsel eingefügt, um die Skala besser ablesen zu können: “Bogen”: 0,8mm…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Easy to print, tought and compact construction. Without supports. Category: Construction Toys
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) ROPE PUMPKIN (MORE…
