1,558 models
Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…
Print approx. €11.71–€14.31 excl. taxPreliminary estimate for one variant
This is a small storage tray that is meant to sit in the empty space above the gearshift in a 2022/2023 Subaru BRZ and (possibly) Toyota 86 (assuming the interiors are the same). It is meant to add a small amount of storage for something…
Service stand for Mammotion Luba (1-3) robotic lawn mowers. Developed and tested with Mammotion Luba 2 AWD 5000. The stands are threaded to make it possible to change their height for some newer models such as the Luba 3. Recommended…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
Adapter für Kärcher-Sauger WD-Modelle https://www.printables.com/de/model/251437-karcher-wd-vacuum-cleaner-adaptor Adapter für Kärcher Sauger alte Pro-Modelle: https://www.printables.com/de/model/251475-karcher-wd-pro-vacuum-cleaner-adaptor
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Print approx. €10.50–€12.83 excl. taxPreliminary estimate for PETGSource material: PET
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Overview I needed to replace one of the little rubber feet that holds the front flap of the cargo cover in place in a 2009 Subaru Forester. I found this design and printed it but decided to make a few changes to make it easier to insert…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Subaru logo & writing that i made because i love cars
Dzielę się tym dla przyszłych pokoleń, długo szukałem czegoś takiego i w końcu znalazłem, więc oczywiście zamieszczam link do oryginału poniżej :)
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This model is designed to print and then assemble with almost no supports (organic recommended). PETG is the ideal material for this, and I found that black JB Weld Plastic Bonder epoxy (in the US) works well for gluing the pieces…
Subaru transmission seal driver for rear output shaft fit 2002 to 2007 6speed and 5 speed transmission. Should fit other years but can't confirm. Confirm for oil seal part number: 806735210 Make sure to use a lot of perimeters and infill.…
Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
Subaru transmission seal driver for shifter linkage fit 2002 to 2007 6speed transmission. Should fit other years but can't confirm. Can't confirm for 5speed either. Let me know !! Confirm for oil seal part number: 806716070 Make sure to…
Footrest for cargo bike. We use it for our Yuba kombi, but it should work for many cargobikes with a “backseat”. For stability, I used a 20 mm round aluminum tube/bar, which snugly fits inside the footrest. It is fixed to the bike by M5…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for PETGSource material: PET
Příruba na skleněný mixer sencor (foto je jen ilustrativní) Vyrobeno pro známého, typ přesně nevím.
This replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback... It keeps the leaves and gunk out when you're not using that mounting position. Safety note: this is not a replacement for the load-bearing…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is a newly interpreted version of the two models: ‘Ultimate Western Blot Incubation Trays’ by Ultimo3d and ‘Western blot, antibody incubation, and protein detection box; medicine box’ by Siiqi. This version also features raised dots…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
🇦🇪 مرحبا بكم في دبي Welcome to Dubai! The Burj Khalifa (برج خليفة, Arabic for "Khalifa Tower" ) is a skyscraper in Dubai, United Arab Emirates (UAE) . With a total height of 829.8 m (2,722 ft) and a roof height (excluding antenna, but…
A cuban link or curb chain for your cosplays! Maybe you will dress up as your favorite rapper for halloween The chain in the picture is the 64cm version In the sizes: 64cm/ 25" - (226 mm x187 mm) 71cm/ 28" - (226 mm x226 mm) 82cm/ 32" -…
Crescent moon-shaped vase with eid mubarak written in Arabic. Here is the list of variations: There are plain and Islamic patterned versions. There is a version that is not a vase. There are versions for bigger holes for texts for…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
NEW v100a CLASP up NOW!! Enjoy! New v100a files up now! I took a long enough break to finally have a new idea! I can now present a version that can't kink up but still moves like a chain! It's a little thicker/chunkier, but the profile is…
Recommended Settings. no supports PLA (must be dry!) 0.2 millimeter layer height 2mm brim or raft 0.1mm Z-Hop + retraction Slow speed 210C Nozzle 60C Bed Infill 50%+ 2 thick walls, or up to 4 walls if scaled-up 4 tops/bottoms Illustration…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
This is a screw on oil funnel for the FA20 engine in the 2015+ Subaru WRX. It also works on a 1997 JDM ej20k so this very likely works on any Subaru engine out there. Just take the cap off and this fits into the oil filler neck. This…
This model is outdated, see the new version here https://www.printables.com/model/1165651-scuba-diver Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D…
In my house we're big fans of Bluey that we watch on Disney+. We wanted a Hecuba garden gnome like on the show but finding nothing available online I decided to try drawing and printing one myself. This is not the kind of thing I'm good…
Deutsch: Ein kleine kleine Verbesserung für den Luba, um ihn 4, 5 oder 6 Messer pro Seite zu ermöglichen. Was brauchst du: (8x/10x/12x) Ruthex M4x8.1 Gewindeeinsätze Tipp: Zudem empfähle ich Klingen zu verwenden die Hinten angeeckt sind.…
I am working on a better way to attach the wing. If it does not work, you might have to glue it on. Let me know if you have any questions or problems with the design.
Check out this video of me testing different elements of the design! If you want even more sizes, check out this video on how to edit my f3d model! This scuba tank holder prevents your tanks from rattling and rolling when driving to the…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
Summary This is a model of a Subaru BRZ (similar to the Toyota GT86) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Subaru Impreza 22b STI. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as…
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
Mudguards for the front wheels to prevent soiling from whirled up grass cuttings. The parts are only placed on the wheel suspension dome and should be held in place by themselves. The mudguards are curved upwards on the outside to ensure…
Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D print. I first dusted the original (shiny black) plastic with the dirt by my door and set up a…
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
This mod is for those users who are tied of cleaning the grass that gets stuck behind the factory blade guard. Why do I even need this? If you don't run this, then your rubber boot is no longer sealed and will allow water and debris…
3D scan of a taxidermized specimen of a Cuban Macaw, or Tricolored Macaw (Ara tricolor), created by the Natural History Museum of Vienna under license CC Attribution-NonCommercial . This parrot species was native to Cuba and the…
We designed this silhouette based on a friend's car. We are attaching the photo of the car, so he can show off haha. The lines are all connected to each other so that it can be printed as a single piece. The printing is simple and fast.…
Bolt on replacement blade guards for the Luba What are the benefits of this design over the original stock part? Stops grass pancakes getting stuck on top of the guard causing causing issues with lift motors retracting Makes cleaning a…
Just a few simple hose holders for scuba diving. A normal bolt-snap eye or a D-Ring (5mm thickness) goes into the small hole, the holder then snaps onto the hose. The fit on the hose is tight enough to not come lose when you don't want…
I found the files on Thingiverse and printed them for a friend. It is a working model engine (35% scaled) with parts color-coded... Sort of. It's really cool! This is NOT my original design, it is a make from Thingiverse. I do not know…
Keil für Fliesen Nivelliersystem der Firma Kubala. Wedge for tile leveling system from Kubala. Klin do poziomowania płytek Kubala Smart Level Print Settings Printer: DIY Prusa Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes:…
Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…
Thread: M12x1.25 Knurled, ergonomic shift knob made for manual Subaru Outback
Mudguards for the rear wheels to prevent soiling from whirled up grass cuttings. The mount is placed over the axle and secured at the bottom with a screw. The mudguard is pushed over the dovetail onto the mount. I've printed them with 0.2…
Ma petite impression qui nécessite maintenant de passer en carrosserie pour le ponçage et peinture.:) :)
This tuba mouthpiece works - sort of - like a real one. Not to be compared with a real one, but in case of a tuba emergency you will be glad to have it. I suggest you sand it a bit after printing to smooth it out.
Subaru Impreza (Bug Eye) Dash Clock Panel Known to Work on a 2002 Subaru Impreza Outback Sport. I recommend CF Nylon. Use a pair of vice grips to pull outward on the rib to make the gap wider while installing the clock (these old plastics…
I needed to hang our new wings somehow and wanted it quickly, preferrably right now. 3D printing to the rescue! Printed using PETG, 0.2mm layer height and 4 perimeters for added strength. Infill probably does not matter too much. I…
A single gauge pod that replaces the existing dash vent in any Subaru Impreza WRX/STI 08-14. For left hand drive, you can mirror the model in your slicer. Material: Ensure to print with a higher temperature resistance material. PLA likely…
Very detailed model provided by MAX_MR_ of the 2014 Subaru BRZ. This model features interior details such as seat, steering wheel, vents, and cup holder! Original model likely requires some manipulation to print as the outer body is a…
Tool to help install cam seals to the correct depth for Subaru EJ engines. It's similar to the OEM tool or any of the other professional tools. It stops on the engine head, so you can't put the seal in too deep. It was tested on a 2007…
This model is based on the original model by LutraVulgaris (@Otter) for the classic (GC8) Subaru Impreza with the Subaru logo visible when you look from the top of the model! (Go check out the other awesome car silhouette models by…
Welcome to The Low Poly Auto Show! This is a low-poly Subaru Impreza 22b STi. It is a remix of a model designed by u/jkmonger on Reddit. It is designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine…
Designed by: ericthepoolboy Hardware Kit and Build Support by Maker Rx Experience the unique engineering of the Subaru EJ20 with this fully functional, 3D printable scale model. With moving pistons, belt-driven camshafts, and a motorized…
A Trilobite style line cutter, perfect as a backup line cutter while scuba diving, climbing, outdoor, survival, etc. prints in two parts that snap together and are secured with two M3 bolts totaling 10mm. WARNING: The utility knife blades…
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long…
A simple section divider for the MaticoopX 30 Incubator Note: This is not my obsession; my mom made me model this, so I uploaded it here for free.…
Just recently I finished an OWD course, well not that recently, just before that corona thing. After first couple of dives in a three-noob buddy team in maybe 2 meter visibility I decided to make a mirror to help us stay together. It…
This is Lucky 13 scuba gear! Flippers, tank and belt and a minimal mask (needs work) The tank and belt print separately so that the tank can go past the hips, and also allows a different tank color. The belt could be printed as a separate…
This is a replica of the dust cap with O-ring groove of an Apeks DIN regulator. This model was created after my buddy lost the dust cap for his regulator and was unwilling to spend around 10 euros on a piece of plastic. For me, that was…
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…
Just some rims to add style to your Luba. With a hiding spot for your AirTag.
Well, after several years, I have decided to redo this model and add more markers! There is now a version 2 of the directional marker. This version has a more rounded tip, is more aesthetic, and has larger holes on the bottom to fit brass…
Rengoku's Nichirin sword guard is a mesmerizing masterpiece that exudes both elegance and strength. Crafted with the utmost precision and care, it serves as a testament to the formidable spirit of the Demon Slayer Corps. The guard,…
Hallo, Mit der Abdeckung soll die RTK Station vor Umwelteinflüssen wie starkem Regen und Hagel geschützt werden. Die Abdeckung hat 3 Haltezapfen und kann damit sauber fixiert werden Der Remix dieser Datei hat eine 5mm tiefer Überlappung…
I remixed the WRX model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
Original: I reworked the original to include a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. All in english: Full cap and Empty cap Tank dust caps for…
This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle) without blocking the other cup holder.…
Scuba Diving Hanger you can use an M3 screw and a nut to join the parts together. Print instructions Category: 3D Printing
There were a few errors with the meshes so parts were becoming separated and broken, they don't now. Also they are STL now instead of 3MF.
This model sits on the tray inside the center armrest of a Subaru Outback (2022). Has dividers intended for a wallet, glasses, and coins (depending on model). Multiple variations are provided as STL. Original Fusion files also provided.…
There are a few different versions of this that all stick out substantially from the seatbelt socket. I didn't want my dogs to break the protruding bits. Fits nice and tight. The tab goes towards the button side. The long model is for the…
Mammotion Luba 2 reinforced side protection
Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.
ENGLISH: Manual reel for fishing by hand, compact and very practical design, it has holes to insert your fingers and hold it firmly to wind the line. in the center a fastening hole for fishing with a bow or slingshot, on the edges 3 small…
Protège lames pour empêcher à l'herbe de s'enrouler autour des vis de fixation. Suite à bourrage avec herbe mouillée j'ai modifié l'original en V2, qui ne pose plus de problème. Imprimé en PLA HighSpeed SUNLU Poids 36 grammes Paramètres…
Includes a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. Remade the design by Lucianocunha ( https://www.thingiverse.com/thing:4552099 ) to work with…
Just made it more easy for printing. Less Overhangs
This gas cap holder is designed for a 2011 Subaru Forrester but may fit a few other model years. The original lanyard on the cap broke so I wanted an alternative means of holding the cap. Let me know if it works for your Subaru model.…
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
In order to make this a real gold or silver ring, you will need to print it in castable resin and get it casted and polished.
A cap to protect the thread of DIN regulator, a small hole allow to use a cord to fix it and avoid to loose it. The design allow to use it easily
Just a cool Scuba Duck for Jeep Ducking and/or Cruise Ducking. No supports.
Need a dust cap for your second hand regulator? Here it is. Printed using PETG, 0.2mm layers, 3 perimeters, 15% infill and no supports. The original Apeks cap seals against the O-ring. To try the same thing with a printed top surface…
This is a fun sculpture idea I had that I decided to make. It's made of several models put together. I have more animals. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Small wrench for AdBlue lid Fits for Audi A6 and others Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: Prusament PLA Yellow Category: Automotive
Do you like my models? Consider buying me a coffee ;-) https://tinyurl.com/f49b8dxw
The rear wing model features a sleek and aggressive design that complements the sporty lines of the Toyota GR86 and Subaru BRZ. It follows the shape of the car's body, providing a seamless integration with the overall design. The wing is…
This 12-piece Luban sphere puzzle is a fun and satisfying challenge. Each piece fits together perfectly, and when all 12 parts are combined, they form a smooth, solid sphere. It’s a great way to test your patience and problem-solving…
cuban link chain bracelet tutorial for Fusion360, just use the sketch and history to learn the process of making this kind of models it’s possible to print without supports cutting flat the bottom part
This is an old model I made near the beginning of my 3D-modeling days that has just been sitting on my computer for nearly two years because I wasn't sure if it was up to my quality standards. This was made before my Seeker , so it's…
These are used to keep your tanks from rolling around while transporting them. Very basic to print. Use a type of filament that can withstand being outside and in the sun. PETG has been my choice. I use 5 Shells to make it strong. The…
Embrace the meme with this keychain! Can be kept on a keyring, hung from a mirror, or used to personalize your vape. Made by tracing a stock photo of an ej20 gasket in Inkscape. Print instructions You might want to slow down your print…
Most of the rear main seal presses I've found require you to hit the press with a hammer or mallet to tap the seal in. While this does work, it's easy to get the seal crooked or in a little too far. So, I decided to take a different…
![Scuba diver [OLD VERSION]](https://media.printables.com/media/prints/762079/images/5938852_a3a16ea1-064b-40fd-8cd9-3b230b90ccc7_76b5d0b5-da2b-4f98-9f3f-544cd67d90ea/large_display_pxl_20210726_070126328.webp)
![[V2] TankLink: Your Modular Scuba Tank Holder](https://media.printables.com/media/prints/1107307/images/8367429_7e159193-3de8-4c8f-acf3-7909c09eda2f_55613600-6a71-4dd5-a436-e10cf06ebf3e/img_9085.jpg)
