4,666 models
I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
A rubber duck snowball maker.
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Print approx. €15.69–€19.17 excl. taxPreliminary estimate for one variant
Flying Butterfly! Here is my rubber butterfly! It's one file print in place. Use 0,2mm layer hight, I prototyoed it using this so it should work for you as well. Place Color change after one layer to make it really pop out! You can…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
"BEST MOM" BUBBLE KEYCHAIN Celebrate the wonderful mothers in your life with a sweet and modern keepsake! This "Best Mom" Bubble Keychain is a key addition to our Love & Mom Collection . It features a modern "puffy" or bubble-letter…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Rubber band plane. Only need a M2 screw. It is a Deezmaker plane remix.
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
There's a positive and negative of the pattern, so one stamps the bricks, the other the grout. One gives an outset look, the other makes them look sunken. I made these to stamp oven hardening clay.
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
I made this rubber band based catapul which can shoot up to twenty meters without any problems. It is very easy and fast to print and build. You just need to find a rubber band… Have fun!
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Use your PET bottle to blow bubbles with a Bubble Wand cap. Bubble juice information can be found at the following link: https://soapbubble.fandom.com/wiki/Bubble_Juice_Basics
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…
Hello, rubber duck eagle. Thanks for your download, enjoy the print!
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Prusa Core One Rubber Foot Holder – Adhesive‑Free Upgrade The adhesive on the Prusa Core One’s rubber feet has always been an annoyance for me, and with some inspiration from Prusa Core One Feet v2 - Prusa rubber feet reuse by Ondrashek ,…
Description A happy little duck toy, based on the classic rubber duck! I made this using Blender (free software). This is my first real design in 3D! :-) Resize as needed to print large or small. Print a bunch and cause chaos leaving them…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
🛠 Materials & Hardware: 🧵 PLA Filament (Multiple Colors) ➡ PLA Green -> [ https://amzn.to/48kWvNJ ] 🧶 TPU Filament (Flexible) ➡ OVERTURE GREEN -> [ https://amzn.to/49bm6sS ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ]…
Replacement Rubbermaid / Gott gas can "nut" screw cap for a 1.5 gallon "Gott" (Rubbermaid) plastic gas can. Non-standard / custom threads made this a fun* challenge. Perseverance and a couple more Youtube lessons in how to use Fusion 360…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
How it started: How it went: How it ended:
Snowboard made as a desktop fidget toy on principles of bubble head figures. How to print: it is necessary to print spring with 100% infill tested on PLA
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Tisková doba je různá, od 26min do 58min (záleží na tom jaký soubor tisknete).
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Zelda: Rubber Helm From Tears of the Kingdom.
Print approx. €6.74–€8.23 excl. taxPreliminary estimate for one variant
Gjord i Fusion 360 med SVG från Wikipedia. https://en.wikipedia.org/wiki/AIK_Fotboll#/media/File:AIK_logo.svg SVG filen genererades inte helt korrekt och en hel del handpåläggning fick göras för att det skulle gå att göra om för 3D…
Print approx. €6.87–€8.39 excl. taxPreliminary estimate for one variant
english We had a “FRZ”-Ladder in our household where the rubber boot fell apart because of their age. The plastic was very brittle and unfortunately there are no spare parts available because the company that produced these ladders most…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Leg for the holders of the tokens as part of the board game "Rummikub". The legs are a little longer than the original legs to give the holders more stability. Feedback Feedback? Ideas for improvements? Please leave a comment.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Holder for a rectangular pan scrubber, based on designs for the Scrub Daddy type of pan scrubber. I started this from scratch, using TinkerCAD. Needs a bit of refinement as I found that the hole in the drain tube didn't go through the…
A simple pegboard mount for a 16oz Rubber Mallet - or any other thick-headed tool with a < 1" shaft and symmetric geometry. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Chubby frog remix to enable to be hung / used as a keyring
Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Print approx. €11.13–€13.61 excl. taxPreliminary estimate for PETGSource material: PET
This container replaces the button blank next to the shifter in your 370z giving you an extra storage space for keys, wallet, parking tickets etc. I saw various other attempts at button blank replacements but none of them lined up…
Print approx. €8.57–€10.48 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: 🧵 Silk PLA Filament (Pink) ➡ [ https://amzn.to/42ui233 ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ] "LOVE YOU" BUBBLE KEYCHAIN Spread affection and carry a little love with you everywhere! This…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A cute sleeping chunky cat. Can be printed without support! This is my first Blender sculpting was made based on the following fantastic tutorial: My cat is a bit chubbier than the one in the video. Show me your makes in the comments!
Perfect as a charming decoration, a sweet gift for animal lovers, or simply for joy. Key Features: Cute & Detailed Design: This little rabbit is simply irresistible with its plump features and expressive look. Easy to Print: The model is…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
LOVE & MOM COLLECTION: "LOVEYOUMOM" BUBBLE KEYCHAIN Celebrate Mom with a gift as sweet as she is! This "LoveyouMom" Keychain is the flagship piece of our new Love You Mom Collection , designed specifically for Mother's Day. It features a…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
Are your scrubbers always wet and dripping? Print this to help them dry out! If you want a to print the basic version, please note that it will use more filament then V4 Beta. The Beta version doesn't need supports and costs less. This…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET
I noticed that there was a squeak coming from the back seats of my Model 3. The problem got worse after I drove passengers in the back seats. I decided to track the problem and found out that it was caused by Isofix and vinyl seats being…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
I didn't like how the wires routed underneath my MK3S+'s frame were squished against the table. Tried Viccroy's design but it raises the printer up a little too far. I made a similar design, but instead it only raises the printer by an…
This is a Small siren Thunderbolt it is designed for kids, which is why it has rounded corners and a small handle it gives the print a bit more durability than some of the other ones I have found online. The handle prints with supports,…
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for PETGSource material: PET
Use this to store your rubber bands, sorted by size. Fits four different lengths of rubber bands. Added the Fusion360 file, if needed to adapt.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
UPDATE: Multicolor file now available. To use the STL, break the object into multiple parts in PrusaSlicer or load in the 3mf file. An ergonomic duck puck shaped scraper to help remove calibration dots and stubborn prints from the bed.…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Overview I needed to replace one of the little rubber feet that holds the front flap of the cargo cover in place in a 2009 Subaru Forester. I found this design and printed it but decided to make a few changes to make it easier to insert…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Want to print a text? Throw some text on the bubble!
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Reexported model with high density of mesh because i would like to have quality and added hole for long nozzles.
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Print Tips Material: PLA Layerheight: 0.2mm (BALANCED) Perimeters: 2 Infill: Grid Support: Yes (Automatic)
Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Requires an O-ring measuring 34.52 × 3.53 mm.
Simple but solid rubber hammer holder. Ø 62mm. Width on the hammer handle - 28 mm. Joint holes are 3.5 mm
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
Creality single-gear extruders, especially the metal ones, come with a very stiff spring and sometimes can, even on their minimum design (screw all the way loose) and true minimum (cap removed) settings, badly deform softer filament,…
I used this Rubber Duck Model from Thingiverse. Enjoy it. Just stick the USB Stick into the duck and push or glue the right and the left halfes together and enjoy. UPDATE: I added a ducky Modell to fit the HAK5 USB Rubber Ducky If you…
Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant
Salut , Voici une impression pour créer une bouteille à bulle de savon à partir d'une simple bouteille (Compatible avec les filetages "pco1810"). 2 pièces à imprimer et à coller ensemble J'ai créé une pièce "Validation_Filetage.stl" qui…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
This print has two parts, both without the need for support. The tray contains a shallow amount of liquid soap + glycerol + water. The bubble wand is placed over the tray and you can place your usual soapbar on top of the bubble wand.…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
small ergonomic handle for ¼" keyless chucks or any other tool with a ¼" hex shaft. It's a simple pressfit with a 6.5mm modelled hex receptacle. On a Prusa Mk3s+ 0.3mm speed its a decent pressfit that does not require too much force but…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This guitar prints in one piece without supports. After printing all you need to do is put on rubber bands and start strumming! Use different sized bands to get different notes.
Print approx. €6.69–€8.18 excl. taxPreliminary estimate for one variant
I designed this 9-piece 6-shooter rubberband pistol. I recommend printing the sides of the gun by themselves. I printed the pins, holder, wheel, and trigger at the same time in basic red PLA. This was printed on an Ender 3 Max Neo. If you…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
So K0ECW remixed this model to make it fit better with the rails, but the rails and the body were detached. No worries, here's a fixed model. PRINT WITH SUPPORTS! I used tree supports because they are very easy to remove. Pair them with…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
My clock was no longer functioning so I modeled a cubby to replace a broken clock on a 1st Gen Toyota Tacoma. Enjoy! p.s. I recommend printing on its “back”, which results in a faster, cleaner print, with much less support material. Print…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
I love the rubber band gun by the The_Creatologist But I found that it was uncomfortable and didn't have a barrel long enough for my rubber bands. This remix incorporates all of these features and it is a better model. Here are some print…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is a stubby screwdriver handle for short ¼" drive bits. The bits insert about 8mm. There is allowance for a 2mm magnet to hold bits in. It is designed for a press fit that doesn't need a magnet, this is what I used the most and have…
Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…
Print approx. €7.13–€8.72 excl. taxPreliminary estimate for PETGSource material: PET
Easy print, but need to get the settings right (see 3mf.) PLA, 5% infill, modifiers of 100% for bottom and back.
Print approx. €6.80–€8.31 excl. taxPreliminary estimate for one variant
Da ich 2 Kästen zusammengeschraubt hatte, brauchte ich danach Abdeckungen für die Löcher. Since I had screwed 2 cabinets together, I needed covers for the holes afterwards.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I saw several HEPA air scrubbers for IKEA Lack enclosures, but the issue that I kept running into was not being able to find the right fan or the right filter or the filters were not in stock. So I found available filters and a fan and…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
The color changes are in G-code.
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
Print approx. €11.67–€14.27 excl. taxPreliminary estimate for PETGSource material: PET
-------------zur deutschen Beschreibung geht's weiter unten-------------- Modified for Ultra-Fast Printing! The Stubbies are now even faster to print - print the complete set in just 18 hours with an MK3! The print continues to impress…
Print approx. €6.50–€7.95 excl. taxPreliminary estimate for PETGSource material: PET
Definition added with paint in PrusaSlicer for printing with XL (or MU3).
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Thanks to the idea of Surfalex2000, https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu/comments Here is my version without screws
Read me! If you'd rather not nail them down, Printables user Stremreich has made a great remix that stands better on its own. Check it out at https://www.printables.com/model/1119525-christmas-bubble-light-standalone-base . I designed…
Rubbermaid sells US made 5 L food storage containers that are the perfect size for storing single 1 kg 3D printer filament spools. They also sell a cereal box lid that seals these containers for use as a dry box with a flip top to allow…
A Tool holder that fits a Wera Stubby
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
To assemble the box you need 6pcs of M3 30mm screws. Simple printing. Wide use of the box
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Was tired of not having a suitable container for my wet steel wool scrubber in the kitchen so i made this. I printed this in PLA without supports.
Print approx. €4.13–€5.04 excl. taxPreliminary estimate for one variant
Coaster with a cute bubble design. The holder is designed to hold at least 6 coasters. Printed with a 0.2 mm layer height. Material - PLA (Prusament Opal Green). Dimensions Coaster: 100 mm in diameter, 2 mm height Coaster holder: 110 mm…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
