Liczymy pasujące modele…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
A rubber duck snowball maker.
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Rubber band plane. Only need a M2 screw. It is a Deezmaker plane remix.
I made this rubber band based catapul which can shoot up to twenty meters without any problems. It is very easy and fast to print and build. You just need to find a rubber band… Have fun!
Use your PET bottle to blow bubbles with a Bubble Wand cap. Bubble juice information can be found at the following link: https://soapbubble.fandom.com/wiki/Bubble_Juice_Basics
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…
Hello, rubber duck eagle. Thanks for your download, enjoy the print!
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
Prusa Core One Rubber Foot Holder – Adhesive‑Free Upgrade The adhesive on the Prusa Core One’s rubber feet has always been an annoyance for me, and with some inspiration from Prusa Core One Feet v2 - Prusa rubber feet reuse by Ondrashek ,…
This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? Maybe use it while smoking a cigar and using the skull of your enemies as an ashtray.…
I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…
Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…
My friend is a collector of Rubber Ducks and a person of poor eyesight and after seeing the contest I got inspired to make this design for him. Supports needed for some areas.
Snowboard made as a desktop fidget toy on principles of bubble head figures. How to print: it is necessary to print spring with 100% infill tested on PLA
This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…
ver. 1.0 the arrangement of the internal air flow and the associated greater weight load to prevent floating you need: layer 0.2mm nozzle 0.4mm support under intake pin 100% infil
Gjord i Fusion 360 med SVG från Wikipedia. https://en.wikipedia.org/wiki/AIK_Fotboll#/media/File:AIK_logo.svg SVG filen genererades inte helt korrekt och en hel del handpåläggning fick göras för att det skulle gå att göra om för 3D…
Leg for the holders of the tokens as part of the board game "Rummikub". The legs are a little longer than the original legs to give the holders more stability. Feedback Feedback? Ideas for improvements? Please leave a comment.
A simple pegboard mount for a 16oz Rubber Mallet - or any other thick-headed tool with a < 1" shaft and symmetric geometry. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous…
Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Replacement handle and switch cover for the Mini R56. The handle started to degrade with time and fell apart so I created this replacement work perfectly. The replacement is glued in place of the old one, I used contact glue for flexible…
🛠 Materials & Hardware: 🧵 Silk PLA Filament (Pink) ➡ [ https://amzn.to/42ui233 ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ] "LOVE YOU" BUBBLE KEYCHAIN Spread affection and carry a little love with you everywhere! This…
Use the same screw as before to attach this piece Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes, only on bed Resolution: 200 Infill: 20 Filament: Prusapolymers Petg Category: 3D Printer Accessories
Perfect as a charming decoration, a sweet gift for animal lovers, or simply for joy. Key Features: Cute & Detailed Design: This little rabbit is simply irresistible with its plump features and expressive look. Easy to Print: The model is…
LOVE & MOM COLLECTION: "LOVEYOUMOM" BUBBLE KEYCHAIN Celebrate Mom with a gift as sweet as she is! This "LoveyouMom" Keychain is the flagship piece of our new Love You Mom Collection , designed specifically for Mother's Day. It features a…
Are your scrubbers always wet and dripping? Print this to help them dry out! If you want a to print the basic version, please note that it will use more filament then V4 Beta. The Beta version doesn't need supports and costs less. This…
I noticed that there was a squeak coming from the back seats of my Model 3. The problem got worse after I drove passengers in the back seats. I decided to track the problem and found out that it was caused by Isofix and vinyl seats being…
This is a Small siren Thunderbolt it is designed for kids, which is why it has rounded corners and a small handle it gives the print a bit more durability than some of the other ones I have found online. The handle prints with supports,…
This is a remix of the Mr. Sparkle Wall Art created by ImaginaryTragedy. The files containing Mr. Sparkle's head/face are exactly the same. What I did is create a 3D image of the text bubble that is on the Mr. Sparkle box. I am brand new…
Overview I needed to replace one of the little rubber feet that holds the front flap of the cargo cover in place in a 2009 Subaru Forester. I found this design and printed it but decided to make a few changes to make it easier to insert…
This is a rubber duck model that will hold a bic lighter.
Want to print a text? Throw some text on the bubble!
Print Tips Material: PLA Layerheight: 0.2mm (BALANCED) Perimeters: 2 Infill: Grid Support: Yes (Automatic)
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
I downloaded https://www.printables.com/model/1133387-fun-rubber-band-glider-4g and got an error from my slicer – it looks like the bottom of the model wasn't completely flat. So I went back to the original (…
This is designed to replace the wheels on a generic metal bed frame with sturdy platforms that protect the floor while providing a stable base for the bed. The bed frame feet are designed to minimize the risk of stubbing toes against it.…
Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…
Requires an O-ring measuring 34.52 × 3.53 mm.
I used this Rubber Duck Model from Thingiverse. Enjoy it. Just stick the USB Stick into the duck and push or glue the right and the left halfes together and enjoy. UPDATE: I added a ducky Modell to fit the HAK5 USB Rubber Ducky If you…
Salut , Voici une impression pour créer une bouteille à bulle de savon à partir d'une simple bouteille (Compatible avec les filetages "pco1810"). 2 pièces à imprimer et à coller ensemble J'ai créé une pièce "Validation_Filetage.stl" qui…
Nature's Miracle Small Animal Cage Scrubbing Wipes 30 pack and Clorox Disinfecting Wipes 35 pack holder - for some reason, these two unrelated products have identical containers, I discovered by chance after printing. Has screw holes to…
A bracket to mount a Rubbermaid foldable stepladder onto the wall. The inner width of the bracket is 30cm, and the two screw holes are inset and work with standard #6 drywall screws. The top screw hole is angled downward for extra…
small ergonomic handle for ¼" keyless chucks or any other tool with a ¼" hex shaft. It's a simple pressfit with a 6.5mm modelled hex receptacle. On a Prusa Mk3s+ 0.3mm speed its a decent pressfit that does not require too much force but…
A model of the Lockheed Martin RQ-3 DarkStar that can be launched with a rubber-band launch or thrown Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend real tabs UP (points nose up) Hold it just between…
So K0ECW remixed this model to make it fit better with the rails, but the rails and the body were detached. No worries, here's a fixed model. PRINT WITH SUPPORTS! I used tree supports because they are very easy to remove. Pair them with…
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…
My clock was no longer functioning so I modeled a cubby to replace a broken clock on a 1st Gen Toyota Tacoma. Enjoy! p.s. I recommend printing on its “back”, which results in a faster, cleaner print, with much less support material. Print…
I love the rubber band gun by the The_Creatologist But I found that it was uncomfortable and didn't have a barrel long enough for my rubber bands. This remix incorporates all of these features and it is a better model. Here are some print…
I modeled a Jet Car Toy With Rubber Powered for kids, who wants moving toy :-) I was thinking about some smart and moving toy and thought of modeling this Jet Car Toy With Rubber Powered. This model I created entirely by myself and I…
Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…
Easy print, but need to get the settings right (see 3mf.) PLA, 5% infill, modifiers of 100% for bottom and back.
Da ich 2 Kästen zusammengeschraubt hatte, brauchte ich danach Abdeckungen für die Löcher. Since I had screwed 2 cabinets together, I needed covers for the holes afterwards.
Print at 0.20mm Color change settings. Start with black to 2.6 Yellow till 3.2 Tan till 3.8 White till 4.4 Finish with Blue. Use 2 10x2mm magnets. No glue needed just press fit. Try it with ironing turned on. Check out my other 8-Bit…
Ein Einfülltrichter für diese Miorkly Gewürzgläser: https://amzn.eu/d/0cwdLx6 Der Trichter kann zur einfachen Anwendung auf die Gläser geschraubt werden. Die obere Einfüllöffnung hat ca. 70mm Durchmesser. Translation DeepL: A funnel for…
The color changes are in G-code.
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
-------------zur deutschen Beschreibung geht's weiter unten-------------- Modified for Ultra-Fast Printing! The Stubbies are now even faster to print - print the complete set in just 18 hours with an MK3! The print continues to impress…
Catnip Bubbles Set A Catnip Bubbles Set containing two wands, a jar to store the catnip bubbles in and a stand to hold everything. My cats love playing with catnip bubbles and I enjoy watching them chase after them.. so it's a win win cat…
Read me! If you'd rather not nail them down, Printables user Stremreich has made a great remix that stands better on its own. Check it out at https://www.printables.com/model/1119525-christmas-bubble-light-standalone-base . I designed…
If you lose the original stylus and the backup just print yourself a new one. Small but comfortable. ℹ : fits model - WT16312B holder sleeve and stand hole (see images below). Still draws on other models. Tip: print vertically with…
What This is a cone shaped scrubbing adaptor for use with a power drill and a scouring pad. Why I am lazy and decided I needed a scouring pad to clean a surface. I figured I could make an adaptor that I could fix a scouring pad too that I…
This is a remix of @MysteryDough_5648 Filament Spool Stand to suit my needs (and maybe yours). Thankfully the original creator posted the .step file which allowed for easy remixing. The Rubbermaid 21 Cup container makes a good dry box. I…
This is a modified version of this christmas light stand that allows these bubble lights to more easily stand upright without screws or tacks. I also added two small brackets to hold the electrical cord. It is recommended to add supports…
Skådis Wera Stubby Screwdriver Mount 🔧 This is a remix of the original Skådis Wera Screwdriver Mounts , redesigned to fit the Wera Stubby Screwdriver . The original mounts were made for full-size Wera handles. I scaled and adjusted the…
This is a remix of two other awesome designs. [Headband Brasil (V3) and COVID RC3:MX FACE SHIELD] No more elastic needed! Designed for 7' x 1/8" rubber bands. It prints in under 30min on a MK3 with PETG, a .6 nozzle, 0.4mm layer height,…
Replacement for knobs that are used for fixating the rubberbands of covers for trailers. Print instructions Print it upside down and use supports only on the bottom side. The contact surface of the supports will end up under the screw. I…
AI generated Rubber Duck Debugger. Playing around. First of all I generated an image using Dall-E. After this, I generated a .3mf file using an AI 3D generator using the image as input. As the size was very small, I scaled and reoriented…
This is a 15x15x40mm bubble level holder for AstroTrac 360 in EQ mode. Two M10-1.5x30mm stainless button head socket cap screws are required to assemble it. Bubble levels & M10 screws can be purchased, for example, from Amazon. Note: a…
Remix of Chris's twin track bracket with a headphone hook so now it's just a “one trick pony.” Printed upside down with supports on the hook, keeps the twin track hooks clean.
Dobrý den, navrhnul jsem 3D řešení bubbleru pro vodní dýmku Steamulation Prime Pro X Black Matt, který má funguje stejně, jako od výrobce https://shisha-steamulation.de/en/product/the-steamulation-classic-diffusor/ .
Mount up one of the common mini round hygrometer/thermometer in your dry box. 1 5/8" Mounting hole with tab slots that keep it from rotating in place. Unlike many mounts, it's gravity resistant! (Tight enough for the tabs to actually hold…
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Chair foot is adjusted to a standard 20mm (19.35mm) steel leg, e.g. IKEA MARIUS stool. The foot has a flat hole that fits to standard rubber anti-slip pads. The hole has three protruding grooves to press the foot against the leg. No…
I had lost the small plastic part, which is needed to operate the capo. I was short of time and could not wait for the order to be delivered, so I quickly printed one for myself. Printed with “0.10mm details” to get the screw thread fine…
This is a clip for a rubber band to connect to the popular Prusa face shield. Print instructions A .step file is included if you want to change the design.
Paper towel holder that can hang off of standard Rubbermaid or Everbuilt wire mesh shelving like at home depot. ( not heavy duty shelves) Printed no supports PTEG 15% infill
My brother in law broke his nubby for his cheapo Cabelas knife, and asked if I could make another. I did, and here it is. Version 2 is the one I printed. I forgot to tap the screw hole. Version 3 I tapped it with an M2 bolt, but didn't…
A simple print to help organize a small IKEA SKUBB box. We have a small IKEA SKUBB in the bathroom for storing a few items, but they kept falling over and being difficult to keep organized. This print fixes that by dividing the box into 4…
Work in Progress. . .
I have a sink with a wide back – I need a place to put scrubbing pads to drain and dry. I made this little tray that is raised up at the back to drain and hooks to the back edge of the sink that is with holes at the front for water to…
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
This is an easy to print Simple minimalistic tool free WebCam Holder for Ikea Stubberget Monitor Stand. The bolt is a 1/4in size, same like the common camera stative mount. Settings Value Infill 5% (adaptive cubic) Perimeters 2 Layer…
For some unknown reason the Sage Bambino Plus Espresso machine seems to be delivered without rubber feet under the drip tray in spite of having a space for the placement of rubber feet. In a way I can understand why - there are rubber…
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
