Counting matching models…
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases. I liked the one by Boogie a little longer than most, leaving space to…
Print, fold and enjoy :-)
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Stand to place your DJI Pocket 3 safely on your desk.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
This insert for Wingspan fits the base game, the European Expansion and the Oceania Expansion in the base box. Its a tight fit, but offers still quick setup and a well organized table. The Box closes completely if the backs of the…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
Left and right LCD screen support to move the screen on top of the base frame, such that it does not stick out at the front. These brackets replace the original brackets that connect the screen to the bottom frame of the printer. The…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
This tenting kit for the Keychron Q11 lets you attach wooden wrist rests to your keyboard for better ergonomics. To attach the wood pieces to the tenting kit, you need to drill some slots into them that match the pins on the printed…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
I wanted to mount my Raspberry Pi 4B including the original Raspberry 7 inch display in our garage on the wall. I searched for a specific casing and found the design “Raspberry Pi 7 Inch Touchscreen display case” by luc_e (…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Description – English This 3D printed cable section tester lets you quickly identify the cross-sectional area of electrical wires in metric units (mm²) , including the outer insulation . Designed for electricians, makers, and DIYers who…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
cover the rear of the LCD after relocating to the top of the extrusion Print in place no supports No hardware required snaps in place.
I did this to keep track which glass belongs to whom. Everybody uses a different color. Printed myself fine in PLA and PETG. v1: star version: let you to stack them in order or shifted v2: square center shaft v3: round version
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
We use “The Original Rabbit Corkscrew” very frequently, and store it in a utensil drawer. We always referred to it as a Houdini corkscrew - I think it is the name of the company. Because it is not secured closed in any way, the corkscrew…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Vielen Dank an https://www.printables.com/de/social/168275-psych0h3ad/about Inspiriert durch https://www.printables.com/de/model/88377-nautilus-nozzle-bunker Dieser Nozzle-Halter hat eine Grundplatte. Sie kann mittels Schrauben überall…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that…
More accurate than the Fusion 360 soccer ball exercises you see on YouTube Fully parametric model Precise geometry to export high quality meshes Bonus: Don't miss the ReadMe, with instructions for creating more soccer ball variations,…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
Design I had originally designed a 2.5" HDD Caddy for the PS2, and then recently found out that a certain company had used that to make a commercial remix to support 3.5" drives. All my models are released as non-commercial to avoid such…
It's not a precise nor detailed model. It has simply 4 parts to show you the basic principle of a Janney coupler. Print in the position I posted. It's basically support-free if you print it small. Will need to add some support with the…
brainrot udin din din dun
Minimal case for Raspberry Pi 4 with integrated M3 thread. I used M3 x 12 screws. I have also included the STEP file for modifications
Have fun with this longitudinal fidget ring! It spins only a few times until it stops. Then you need to spin it in the opposite direction. I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please…
General Information: A hand sanding tool for 150mm sanding discs and sanding grids with an optional vacuum adapter for dust extraction e.g. for woodworking or drywall works. Usable for 150mm sanding discs or grids I used 20mm…
Bambu Lab Plate Holder For All Printer Models Including A1 Mini Update 23 Oct 2023: I found that the large plate holder was too small in width so the plate would not slide in all the way so i have now updated that and fixed the problem. 3…
sI heard that people would like to have a nozzle scrubber system on the front, that they can use with g-code. While my other nozzle scruber are great for multitool printing, this one is intended to be use before calibration. When heating…
Its a Tungsten holder shaped like a K cylinder Remodeled the topper with proper threads Added clearance for threads
these all fit the thinner top loaders. if yours are thicker, adjust for that. i provided 16 different sizes and styles. files named seller are for easy side removal of card and putting back for selling. the others were designed more for…
BLTouch mount for 40mm fan. Concerns: Airflow restriction is not a problem, as I and many more people use fan-mounted BLTouches without issues. Why make your own? I wanted a mount that fulfilled all my needs: Being easy printable. Use all…
This is a replacement top for the M3 bolt sorter. It's a great design, but was missing a 14mm hole so would mean I kept having to double check the 16mm collector. In the absence of a step file, I've tried to keep this as true to the…
Giant rats, found under every tavern ever existed. Designed for Giant Rat Monster profile
This eerie tile is fan art , designed and sculpted in Blender to bring a piece of LV-426 right into your home. It’s back and ready to haunt you with its menacing, protruding form. The design takes inspiration from the vacuum forming…
A collection of 12 coasters with the symbol of the typical classes in fantasy roleplaying games inspired by dungeons & dragon. Barbarian Bard Cleric Druid Fighter Monk Paladin Rogue Ranger Sorcerer Warlock Wizard Model height is original…
Minion Army including Kevin, Bob, and Stuart.
This modular insert allows you to store all the pieces of the tabletop game catan including the expansion Cities & Knights and the expansion to up to 6 players for the base game and the expansion. All parts can be printed as is, without…
Multiboard hammer mounts (regular size and mallet size). Use tree support from the build plate. Reccomend using 3 walls. Also recommend using a multipoint bolt and the heavy duty (hooked) snap.
Vit Budina makes wonderful print-in-place models of trucks and cars: https://www.printables.com/@VitBudina/models even more for money at https://cults3d.com/en/users/budinavit/3d-models Some of them are well-made replicas of real cars,…
This is the full set of printed parts and PrusaSlicer profile to mount the 3DChameleon Mk3 onto the Sovol SV-06 printer and the SV-06 Plus. This set includes the 3DClippy filament cutter used to cut off the tip of the filament so it can…
In my case I was trying to remove the thick clear insulation around the wires that I am reusing from some strippped direct burial 14 AWG wire. Adjust Wire_Diameter & RazorBlade_Thickness to match whatever your trying to strip and the type…
A number of people requested the blank trophy from my 3D Printing Trophy series for various reasons. While I wasn't willing to distribute the original from that series, here is a variant trophy complete with .obj file. Remixing is…
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the…
I really like the stealth press by Iconic-FAB.com (@IconicFAB) and am looking forward to use it a lot. Sadly my soldering iron (SREMTCH Soldering Iron Set) - I bought solely for working with heat inserts - does not match any of the…
I’m excited to introduce the latest update! I’ve meticulously tested all the models to ensure they function flawlessly, refining each detail to enhance performance and reliability. A significant amount of time and effort went into…
NEW - Blank STEP file now included for you to customize your favorite character, team or logo Mandalorian class 3 hitch cover Printed in ASA with no supports
Suggest printing with 100% infill. The bookmarks are 2mm thick you can cut them in the slicer to create thinner e.g. 1mm versions.
Filament-Trockenbox mit Silikat-Behälter und Etikett Die neueste Version der beliebten Filament-Trockenbox ist jetzt zum Download verfügbar. Diese ist in Gelb hervorgehoben, während die anderen Bilder noch die erste Version zeigen. Die…
Hello, Today I have for you a training knife case including a LARP/Airsoft knife . It contains 3 parts of the case that need to be glued or screwed. There is also a model of a compatible knife. For better printing, you need to cut it in…
We all like to travel safe and arrive relaxed at our destination. Sometimes however our loved ones accidentally unbuckle themselves which can lead to dangerous situations. The seat belt alarm goes off and you turn around to see what…
My collection of self designed OLED covers for CRKBD/Corne. Update 10th Nov 2021: added DXF file for pimoroni trackball version. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 10…
In this case fits only a LD2410C, see the pictures. This is meant for bluetooth use case. So if you are integrating this sensor over bluetooth to Home Assistant or any other Home Automation Software, this Case fits perfectly.
This is my custom spirit island organizer I designed and printed myself. It can hold all currently released content (Base game, Branch and Claw, Feather and Flame, Jagged Earth, Horizons of Spirit Island spirits, and Nature Incarnate) in…
gym equipment including: 1x barbell 2x dumbell 2x 20kg plates 2x 15kg plates 2x 10kg plates 4x 5kg plates 4x 2.5kg plates 4x 1kg plates
The reusable cable ties are 3D printed using high-quality flexible filament. They are flexible, durable, easy to clean, and can be reused multiple times. The wire management organizer features a button design for quick and secure…
All marker geometries have holes for 6mm magnets which can be glued in place, the flat one is a bit special since it is meant to be used as a base for blue tacking small parts to it. Dodecaedon holder accommodates: 25 full size marker…
This is a stand for a Kegland Oxebar keg (4l and 8l version) with a SodaStream mount. Puts together a Oxebar keg and a SodaStream cylinder into a nice package so it can't fall over (especially for the 8l version). If you use a mini…
Four custom spaceships created to remedy the one heretical mistake in the Dune: Imperium series of board games - having the ability to get the beautiful small models of soldiers, workers and alliances with the Deluxe expansion- however…
Here it is! Filament Darts. Try recycling filament for the point. Set up a cardboard box for a target and you're in business. Also works with those hole-filled plastic targets everybody seems to have. Update: New models ! Significantly…
brainrot udin din din dun with movable arms
I've uploaded wheels in 45mm and 50mm diameter, bearing takers and straight to axle type. I recommend 45mm for most anti frames but let me know if you would like other sizes added. I've also added a fusion 360 file which has a template…
Gridfinity-compatible M3 Bolt Sorter Top - Including 14mm remix. Now fits the Amazing Gridfinity M3 Bolt Sorter
I have been reluctant to design an insert with Nature Incarnate coming out and future expansions planned beyond that. If it's just going to be out of date in a year or two, why print one? I don't want to have to design and reprint an…
This is an insert for the board game “Shallow Sea”. It includes space for all components, including expansion content and extra content exclusive to the Kickstarter. It includes dedicated space for: All tiles (including expansion tiles)…
Battleships For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship
Remixed doors to have modern easy to grasp for granddaughter handles. I only include a single stl file, you just swap x axis in slicer. I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to…
This is a really quick and easy tool to help you remove/install the frame locks. It has imprints in 2 directions so it works both at 0 and 90 degrees. The spacing has been scaled up 3% from the original frame locks so regardless of your…
This is bits from quite a few tool caddys i've used over the years merged into one suitable for the Prusa I3 MK3S + This can hold 4 x Allen Keys (one size larger than comes with prusa as i use it for my table) 1x Tweezers 1x Philips Screw…
Designed these and have been running them on my track car for a few months now, glued on. Haven't had any issues other than getting called a ricer. Printed in PETG and spray painted with white enamel for extra protection
I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
No more running back and forth to the cupboard for the required tools. Keep all them all with you, while cleaning. Features: Holds 2 tools to the Dyson Wand Incorporate the 2 keys required to open the brush head (the ones that Dyson…
Please support the original designer and check out their now updated (for MK4) original model that can be found here before considering this model as an alternative. Please excuse the current documentation on this project as I am still…
This is a cornice piece based on the dentil molding found in older houses, that I made for my Wife and Sisters 1:12 dolls houses
Simple rack brackets for Ubiquiti USW Pro Max 16 PoE including power brick support
With this variant you get the chip to plug in as well as the thaler to insert. Mit dieser Variante erhält man den Chip zum Stecken als auch den Taler zum Einlegen.
Cover for the Nuki Smart Door Lock 2.0 with Nuki Power Pack. Both USB-C-Ports are accessible.
Designed as a variable storage space for the PARAT work case. For storing and sorting small parts and materials. Bottom and top are created for a freestanding binder. Each box closes with a lid. The lid closure is provided by the binder.…
I just wanted to divide my L-Boxx Mini on the long side to put in Jumper-cables. So I created this divider/seperator, which has a simmilar style as the original separators. Fortunately the part just fits the printbed of my Prusa Mini…
I had some left-over wire taking up space on really large spools. I looked for a smaller wire spool to print, but didn't find one to my liking. I created the OpenSCAD model to be able to make any size spool you could want, within the…
The model consists of two parts: right foot holding the docking station and the ThinkPad left foot which attaches to the thinkpad only The right foot has a hole to access the power botton. The Lock for the key and the Kensington Lock is…
I wanted to have a no nonsense functional and “unstyled” key holder. After searching printables.com I got to https://www.printables.com/model/69197-key-wall-holderhanger-for-8-keys but it had to thick of a lip for my particular tape and I…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) ROPE PUMPKIN…
Cases for different ESP32 boards Seeed XIAO ESP32 C6 (21 x 17.8 x 1.35 mm) Waveshare ESP32 S3 Zero (24 x 18 x 1.7 mm) ESP32 C3 SuperMini (23 x 18.2 x 0.8 mm) No screws required, the lid is fixed by friction Different openings for…
I liked many of the waste buckets but needed to make my bucket fit the exact space I had behind the printer (and add a bit of text). Of course this is not a new design hence the remix attribution. But it is a new model in fusion 360…
A holder to support your graphic card. You can print it out without support. It can support from 64~103 mm high. You can adjust the height fit your computer!
These arms work with the Cup turners. You will need an M3x12 bolt and nut. Standard Rod = 130mm XL Rod = 190mm xmas bulb rod. Three different diameters for various size rubber or cork stoppers. Print instructions no supports needed.
Case to hold all the player pieces for a 3d printed Settlers of Catan base game set. ( I also have a smaller version for player pieces without the expansions) https://www.prusaprinters.org/prints/124952-settlers-of-catan-player-piece-case…
This is a remix of the excellent Dice Hospital Ambulance NO SUPPORTS REQ'D by swholmstead . I wanted to be able to highlight the numbers on the ambulances with a sharpie so I changed the number in the windshield to a copy of the number on…
Make shure the material the final part is made of can withstand at least some heat ( i would guess it should be around 100-150°C. I used B07H5S9VP5 (ASIN, use search funktion on amazon) although the material could have been a bit stiffer…
Got bored tonight so I decided to design for your printing pleasure. Presenting the Henry Rifle Big Boy scope mount. Its for Gen 2 rifles. UPDATE After printing it, I believe it would be better solid. So I may redesign the body and upload…
This is my take on a Nucleum organizer that could fit every expansion released until ERI. This actually has more space to potentially fit in another expansion (not another map maybe.) It's a two-box solution. In the big box we have core…
The Chainguard is printed in two parts to fit it on most printbeds, the fixture is printed in two parts for obvious reasons. The two parts of the chaingurd fit together by a little slot and have sufficient gluing surfece to conect them…
The vinyl extrudes from its cover about half of its diameter. The display can be mounted with two snug screws (dont overtighten them, they don't need to withstand that much weight) or adhesive tape if you have one strong enough. I added a…
I designed this bike box more than year ago, because I wanted a practical way to transport a chain bike lock. I used it for about 14 months now and it holds very well. I made it from Prusament PETG, it seems to withstand the sun and…
Make this from any kind of filamant as long as it is white and lets the light shine through.. You need to buy the pre-mounted LEDS in a ring from ebay or any Chinese supplier, program an Arduinop nano and get a clock module attached to…
This is a simple cap for the Timemore C2 coffee grinder. So you can put it in your travel bag without spilling out coffee dust everywhere. EDIT 2022/09/26 I added a new version which is tighter. As I noticed the previous version could get…
Rámeček na dvoudinové rádio škoda octavia I.
This is the blank for my other upload. You can set the holes to wahtever you want. I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
IT Scatola dei terminali e del condensatore per motori elettrici Tipo 56-71, 80. Editabile per ottenere una scatola con la flangia per i motori tipo 80, 112, 132 ecc. le sue dimensioni di ingombro sono di 138mmx115mmx48.5 sopra la flangia…
Although being a 70’s child, I never heard of this game before getting involved with 3D printing. As for the housing (split into two parts which are glued together afterwards as removing the necessary support structures has been proven to…
DIRECT-DRIVE HOTEND SETUP Including The Sherpa Mini + Stock Hotend + Stock Levelprobe + ADXL345 I designed a new hotend mount for the Flsun QQ-S Pro, which provides the stock hotend setup in combination with sherpa mini extruder as…
