4,141 models
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Kit card model of the two-seater ornithopter from Dune (2021). Can be printed in a single piece kit card or as separate pieces in different colours, at a different scale or to replace a piece that broke. Tested to work at 75% scale for…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of the Atreides Signet Ring from the movie Dune. You can find more of our Dune models like the box of pain or bull statue here The download contains the model ready to be 3D printed. It is placed on the print bed as we…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
tool holder for Elegoo Neptune 4/4 PRO
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
The Neptune 4 Waste bin is a rectangular waste container that snaps onto the left side of the Elegoo Neptune 4 or Neptune 4 Pro. It may fit other printers with 40 mm square extrusion frames. It's surprisingly useful to have a little bin…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Remix of the awesome color change buddy by Clement to fit the Elegoo Neptune 3/4/pro family of printers. There are files included that have so far been tested on the Neptune 3 pro, Neptune 4, & Neptune 4 pro. If you find it works on other…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Original Elegoo tool holder V2
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Cyberpunk Kitsune. This would make for a nice wall hanging. In prusa slicer right click on model → add negative volume -→ gallery -→ universal wall mount hole. -→ align to your liking. or do a negative boolean and make it a mask.
Print approx. €23.12–€28.25 excl. taxPreliminary estimate for one variant
The luxurious Penguin Galaxy edition of Frank Herbert’s original Dune features a beautiful cover by the designer Alex Trochut. This bookmark is a miniaturised homage to the back cover logotype with the letters D-U-N-E stylised in a…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Sculpture of a japanese mythological creature - kitsune, nine-tailed fox). Designed to print without supports! Print instructions Should print without supports if your printer can do short distance bridging. The gcode works on Prusa MK3…
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Valknut symbol with runes - Two models diameter approx. 100mm Printing: Supports: NO Layer: 0.2 mm Filament change at 11th layer
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
The elegoo neptune 4 and 4 pro are budget printers, as such elegoo cutted some corners to make it affortable, one of such corners is the spool holder, it is just a piece of plastic you screw in and put your spool of filament on, the…
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for one variant
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Bonjour a tous, voici un support en forme de dinosaure. Il marche pour les lunettes de soleils et celles de vues également, il est possible de faire un modèle pour enfant en adaptant l'échelle (80% ou moins) Bonne impression ! Support…
Print approx. €4.68–€5.73 excl. taxPreliminary estimate for one variant
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
Improved, stronger, revisited Harry Potter style glasses Lunettes style Harry Potter améliorées, renforcées, revisitées
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Michigan J. Frog - Looney Tunes The dancing frog. He is in one short only called “One Froggy Evening.” https://www.youtube.com/watch?v=evgEJlOPoeo
Print approx. €19.05–€23.28 excl. taxPreliminary estimate for one variant
Vase with Winged Griffins by Prosper Jouneau
Print approx. €19.60–€23.95 excl. taxPreliminary estimate for one variant
Shadow box art from epic sci-fi novel DUNE from year 1965. Which you may recognize from games and movies as well. I used four colors and six plates. The colors and material I used Plate - Filament PM / PLA+ - Desert Beige Plate -…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Un clip et deux versions de crochets pour suspendre des balais, des pelles, … bref du rangement / one clip and two versions of hooks for hanging brooms, shovels, ... more and more storage
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
This is a remix of a cute articulated worm from here: Worm Key Ring by Madistudios - Thingiverse substituting its head with a dune worm. Print in place. Layer height: 0.2mm. Infill density : 15-20%. Supports will be required but only at…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
I designed a storage box with two small drawers for my Elegoo Neptune 3 Pro printer. Design higlights; Option to print with vase mode Reduces print time and material by ~70 percent I pushed limits and used 0.4mm noozle with 0.8mm line…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
AI Generated Pepe le Pew. (tripo) details added in blender using color uv map and displacement. post sculpting - needed for random noise and shadow displacement. Total time spent including this typing : 30 min
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for one variant
I printed at 150% , 0.15mm layer height, in PLA
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
Clampable mount to sit your webcam at bed height to the left or right of the bed
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Inserts for your trooper token, compatible with the Dune board game. If you'd like to buy a set, I sell them at: https://www.etsy.com/listing/957361133/dune-board-game-trooper-token-inserts
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Anschlag für die Druckplatte für ein leichtes und richtiges einlegen. Einfach mit Sekundenkleber an die Ecken von unten ankleben.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
— Hatsune Miku Keychain — --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and get the commercial…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
It's handy for keeping it dark at night if you sleep in the same room, or protecting against unwanted touches. Handy for if you have a pet that likes to touch everything or just keeping unauthorized people from pressing buttons. It sits…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Use min 50% infill or light are gonna light through wall I use lights with usb cable for best effect like it's glowing obviously, just round about walls and you are done Maybe you can use lighter and do little burn marks for effect but i…
Print approx. €8.99–€10.99 excl. taxPreliminary estimate for one variant
This is a remix of Targ 's Baby Sword Rattle , with embossed Norse runes added to the blade. They spell the name of the name of the baby this gift is for. I only added to the design of the blade. The other model files and detailed…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
If you like these models, please press the like button. If you create these models, please post a make! These fridge magnets are designed to be usable as a coasters also. 3 Characters from Looney tunes are included and all the models are…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Feyd-Rautha Pose from Dune 2 - Fix and Re-Sculpt. I will keep this in the free area. I am not 100% confident with the fix. The model itself from andrdudka is awesome as fan art, but it had multiple issues for printing. And I was blowing…
Print approx. €15.69–€19.18 excl. taxPreliminary estimate for one variant
Printed without supports on 0.4mm nozzle with 0.3 layer height, 4 perimeters can be connected with classic LEGO 2x2 plate also included as spojka.stl
Print approx. €7.78–€9.51 excl. taxPreliminary estimate for one variant
Jednoduché sluneční hodiny - úhel stínové tyčky i nepravidelné úhly na ciferníku byly pečlivě zváženy. Avšak občas se sluneční čas může mírně předbíhat či opožďovat oproti našemu technickému času, v závislosti na místě, kde hodiny…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for PETGSource material: PET
The Two Stories of Vital-Dubray's "Neptune" This 1856 sculpture by French artist Paul Vital-Dubray isn't a snapshot from a single myth, like a scene from The Odyssey . Instead, it's a powerful and symbolic portrait of Neptune's absolute…
Print approx. €14.43–€17.64 excl. taxPreliminary estimate for one variant
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
Print approx. €18.50–€22.61 excl. taxPreliminary estimate for one variant
Sea of Thieves coaster - The Reapers Bones Unearthed Diameter : 100 mm Sous verre Sea of Thieves - Les os de la faucheuse font surface Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
Angelic rune with the effigy of the series Shadow Hunter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 5 Filament: PLA black Instagram: @roiku3d
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Trichter um das Wischwasser in einem Cupra/Set Leon und Formentor aufzufüllen. Mit Aussparung für den Haubenarm. Zudem habe ich noch eine Belüftung eingebaut. Passt sicherlich auch für andere Marken mit einem Durchmesser der Öffnung zum…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Manual multimaterial project specially fine tuned for MK4 and MK4 only. Before finding the proper settings, I experienced bubbling, over extrusion and jammed filament. I am now having a clean wipe tower and nice multi-colour parts. You…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A quick probe holder I made for my rimmed 40 breeder. Each one will hold one probe and can be easily stacked to hold multiple probes..
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers. There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly. 🔧…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A cute little kitsune taking a bath in some warm tea. An interesting bit of decor or a great gift for fox loving friends. Works great in PLA or PETG, prints with no supports Category: Sculptures
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
This is a standable plaque based on the "deltarune" symbol from Toby Fox's indie game DELTARUNE. The version in my make is made using black and white on a Prusa XL (although the file provided is sliced for a MK4S.) Note : for those who…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
The back-plate for my Neptune 3 Max arrived bent, and I couldn't get it quite bent back right. I reverse engineered it, adding considerations for a plastic construction, and now it works great and is strong. I printed in PETG. I don't…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Beads with all Futhark-runes plus the trinity knot. Prints without supports. Hole diameter: 5,5mm
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
The added slots align with the LCD screen mounting points, on the right hand side of an Elegoo Neptune 3 pro printer and allow the height of the baseplate to be adjusted vertically. The original M3 bolts were used to secure the frame in…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
This is a moving spinnable version of the quest marker icon from the MMORPG ‘Runescape’ made by Jagex. Introduced in the quest ‘Ancient Awakening’, The new in-game spinning quest marker was far easier to see and use. Reddit users were…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
I made a tiny FEP tuner, just place this under your FEP film while tuning to get the right tightness of your film. The tuner has a height of 13mm wich gives your FEP the perfect slack before tuning.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Full Credit to makss70 for creating an incredible design This is a remix of the original model. The original model was great but lacked some holes for mounting which caused me to have problems installing it, so I fixed it to make it one…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
This model was inspired by Paul Kensler's model . It functions as a: Holder for the draw deck Display for the active fortune All-in-one unit to signify “starting player” This has plenty of room for all of the Fortune Teller Cards from the…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
36 holes, two or three colours
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Precision Espresso Tuner - User Guide ⚠ Before You Begin: Coffee Selection is Key! No amount of fine-tuning can compensate for poor-quality coffee. It is highly recommended to use specialty coffee that is freshly roasted and suited for…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Support mural pour tuner 2 de JBL. Soit poser comme sur une étagère soit fixé avec 2 colliers dans les emplacements prévus.
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for one variant
étui rigide pour lunette … * if you do, it would be nice to put a picture... :)
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
I found Devin Montes’ sharpie blender about a year ago, and I found the idea quite interesting. The stripes that can be achieved are really fascinating and quite pretty when done well! But unfortunately, this design has a flaw. It is…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Display stand for Trekkie's Gom Jabbar model (scaled to 160mm) labeled in Orthodox Herbertarian font . This is my first model, so I'm afraid I used primitive Harkonnen techniques (TinkerCAD), but it's functional. Photos are of a quick…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING I was making some MMU prints and it was always hard to find where the filament started from. So I whipped up something in Tinkercad and it took lots of trial and error to get…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). Super glue (for magnets). *If you do not have magnets, I have included a 3D printed…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
I printed it with 0.25 nozzle and 0.1mm layer hight, but you can try it with 0.4n too! I made it with a wood containing filament just for testing the small nozzle. It was not the best settings because the lack of retraction, but I wanted…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
I build this gantry to check the righ Extruder Rotation in your printer
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
It Showes that i simply cand Paint The modell prints in 45min at a comen speed 40mm/sec use THE Original if you want to Remix I got no SLA so i had to Trick or Split THE Sculpt is 75mm 3" Tall for more Detail
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
MK4 and MK3S PLA; Nozzle=0,4; Infill=20%; Layer height= 0,3 mm
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Doll's leg reproduction - Reproduction d'une jambe de poupée scan method with OPENSCAN from Object to 3d model : https://en.openscan.eu/
Print approx. €14.09–€17.23 excl. taxPreliminary estimate for one variant
Piccolo diffusore per la barra led, va sistemato ad incasto.. stampato con pteg trasparente
Print approx. €9.81–€11.99 excl. taxPreliminary estimate for PETGSource material: PET
I remixed a webcam mount that was intended for tripod-mountable cameras and made it suitable for use with clip-on webcams. I basically just flipped the webcame platform vertical and removed the tripod hole, since it is now unnecessary.…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
My sons play trombone and they have a Snark Tuner and the stem broke so instead of having to buy a new one I made one and attached it to my kids Snark and it works perfectly! So much better than buying two new ones for $20.00. The black…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Yelps : RuneScape Boss
Print approx. €6.92–€8.46 excl. taxPreliminary estimate for one variant
PETG (UFX) TRYSKA 260°C Deska 85°C Satén Násobič extruze 0,8 Rychlost 100% Výplň 20% model vytvořen podle obrázku (z TEMU)
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for PETGSource material: PET
Printed with PETG-CF @ 0.2mm with supports 45% infill but you can use any settings you feel works for your application. 3mf file is what i printed with my Bambu X1 Carbon…. FYI
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
Unexpected Meeting ;-)
Print approx. €4.48–€5.48 excl. taxPreliminary estimate for one variant
Boite cadeau pour offrir une montre ou autre. Bas : 81x81x55 mm; parois : 2 mm Haut : 81x81x55 mm; parois : 2 mm Gift box for a watch or other gift. Bottom: 81x81x55 mm; sides: 2 mm Top: 81x81x55 mm; sides: 2 mm
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for one variant
A cute little trophy to reward kids who competed in the school spelling bee. We borrowed the bee ornament from WHerzog and it is available on printables.com. The model is made with OpenSCAD so it can be modified and customized to your…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
I have an Elegoo Neptune 4 Pro and Elegoo's Enclosure (https://eu.elegoo.com/collections/fdm-3d-printers-) To make the screen easier to reach, and being able to do so without having to bend down or open the enclosure, I made this mount…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a case for your eyeglasses - it should fit most sizes up to a width of about 150mm. Printing It prints without supports on a FDM printer - simply put it with the large flat surface down (original orientation of the STL). No…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Použití filamentu jsem zvolil PETG, protože jako začátečník mám obavy z pokročilích materialu. Doporučuji pro pevnost přidat více perimetrů. Tišteno bez podpor Vnější Průměr je 55 mm( stolu ) a vnitřní je 38 mm ( slunečník)
Print approx. €4.95–€6.04 excl. taxPreliminary estimate for PETGSource material: PET
You will need a fiber laser cutter to cut the 1mm Inox gauge, and a 3D printer to print in PETG the support, 0.4 nozzle, 4 perimeters, 0.2 layers, support on the plate only ! printing orientation: square hole entry face the plate ! the…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Always wanted to try plotter attachment, but I decided to make my own with few specific features in mind: High rigidity and good precision of lines. Spring loaded, so it provides more or less consistent force. And it works fine in case…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
stampato in PETG trasparente Quakità: 0.2 Riempimento: 20 Velocita: 60 ha bisogno di supporti stampato con elego neptune 3 pro
Print approx. €9.64–€11.78 excl. taxPreliminary estimate for PETGSource material: PET
M4 Lock Nuts set of 6 for Neptune 4 Max
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
A thinner clamp for uneven undersides of the clamp surface. Originally designed for clamping on the arm of a plastic garden chair which had an uneven underside. Replaces the clamp part from the original model by Martin_au. Could use some…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. If you have to place the machine at a 90 degree angle because of space constraints, you may need this mount, which slides on a rail on the…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3 string instrument I designed that is similar to a soprano ukulele, but even smaller. These models will fit on a Prusa Mini+ with minimal supports needed. I recommend printing the body facing up with using supports only at the…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
De eerste kip van mijn zoon, iemand had die eens geschilderd gewoon op een blad papier. Ik hab AI er een 3d tekening van laten maken en dan met STLbuddy een stl bestand laten maken. Dat koste me wel 7 punten voor de details. De stl file…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
![Dune (2016) Bookmark [REMIX]](https://media.printables.com/media/prints/678296/images/5333641_0dbc8582-410d-49f9-aa4a-75932a4b03cb_6573fa64-e4ef-486f-a0df-b12dd4e97e35/dune.jpg)
