1,284 models
For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This model proposes a unique tool that combines a 4x SuperPinda adjustment tool and a motor visualizer to attach to the X-Axis Extruder of your 3D printer. It will always be on hand whenever you need to adjust the SuperPINDA. You can…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Ferrari logo for thrustmaster wheel badge. The badge is meant to pop in and out. It is a tight fit. It will snap in no glue required. You can add glue if you would like. To remove the logo, use a small flat blade driver at the back of the…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
German 3 mm und 6 mm Innensechskant für die FOX Dämpfer DHX2 / Float X2 English 3 mm and 6 mm hexagon socket for FOX DHX2 / Float X2 dampers
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
This part is for quick adjustment of the height of the rotating chisel. You need the printed part, a 608 ball bearing, a steel round bar (must be turned to fit), and M5 bolts with nuts. Additionally you need a small spirit level, I use a…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
To change wheelbase for 3racing ex real crawler. And not to have to make new links. Orginals are OK
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
This magnetically closing box is meant to be in the filament pathway of Prusas MMU/MMU2/MMU3 unit to give access to the filaments for manipulation or manual filament adjustment. Furthermore it displays which Filament color is in the…
Print approx. €6.58–€8.05 excl. taxPreliminary estimate for PETGSource material: PET
A friend asked if I could make a replacement for the head restraint adjustment button for his Skoda Octavia Mk3 Estate (original was lost or broken). An hour or two with calipers and FreeCAD later (and a couple of hours printing and then…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
Temperature knob for WÖSAB electric radiator. Since the spare part is no longer available for purchase, I have developed a replacement. It is designed in Fusion 360 and adapted for 3D printing in Prusa Slicer. Printed on Prusa 3iMK2S The…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Backrest Abjustment Handle for Gaming Chair
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant
This is the ALTN Pitch Trim Lever for the PMDG 777-300ER MSFS 2020. Made for the Thrustmaster Bravo Throttle Quadrant. Fits great works great, enjoy.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This is based on Matthias Wandel's indicator mount for his table saw fence for micro adjustments to rip sizes. I printed this at 0.2mm layer heights with a “color change” at layer 11/2.2mm to put some magnets in. My magnets are about 11mm…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Bought a new (to me) truck and realized the rear passenger air vents weren't adjusting as they should have. Pulled apart the console and found that the knob that holds a gear mechanism had broken. Rather than try to source a new air vent…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Replacement for the grind adjustment knob for Hario Skeltron Plus coffee grinder. You'll need a matching little hex nut. My recommendation is to eat the plastic part with lighter or a torch and push the nut against it. This will make your…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head of screw…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
A much needed tilt lock for the: Phone Holder, smooth tilt adjustment, prints in place by E. Soderberg Here's a simple addition to the phone holder that allows you to lock it. Just slide it on when you need it. When you're done, switch it…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
Desk mount for a Thrustmaster T16000M HOTAS. This design will lock the mount in a forward position, so it's best placed either in front of you, or closely off to the side. This assembly is not entirely customizable like other models…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
Introduction With this adapter, you can hard-mount your Thrustmaster TMX or T150 steering wheel (T128, T248, T-GT II, T300, TX, TS, T500, 458, T80 models as well). It's quite an upgrade from the OEM clamp-style racing-fixation-kit-fk2…
Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette. Print instructions You are absolutely free ! I printed it in PLA, no need to set the infill as it's…
Mount for fixing Thrustmaster T-LCM pedals to your Playseat Challenge. Print 4 brackets, screw them to the pedal base and fix it with zip-ties. Done! You need more simracing parts? Hace a look:…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
Tired of your throttle sticking? Use real bearing, either metal or polymer. With adjustable detent. Personally I fly helicopter so I skipped detent, but great to have the possibility. Re-upload of ADU-labs Thingiverse files . Such a great…
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
It's a simple tool to help fine-tune the bed leveling.
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
——Work in Progress—— [3 JULY 2025] Uploaded; Base_Top_v2.stl //Modified clearance, can set bearing easier Base_Bottom_v2.stl //Modified clearance, can set bearing easier and able to print without support. [5 JAN 2023] Uploaded;…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
This is a simple guide for adjusting the bed leveling knobs for screw tilt calculated adjustments. The guide sits on top of the knobs and fits around the plastic where the screw comes through. I line up the “spokes” of the printer knob…
All in one. Print in place. Qidi Q1 Pro bed leveling tension knob v2. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. I've also updated the screws_tilt_adjust macro so it probes a reference point in…
Tool to adjust gear lever of a VW Golf 2 Category: Automotive
Focus adjustment tool for Raspberry Pi Camera V2 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: 3D Printing
There are 3 files available on this page : 1/ The DESIGN PIECE is the most important one. You must use it as the base to design your own knob that fits around the piece. 2/ The ADAPTATER is the part needed to mount your knob on the…
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG For better durability, 100% Infill Printer used for prototyping: Prusa MK4 Type of bed used for prototyping:…
This is a remix of https://www.printables.com/model/176417-phone-holder-smooth-tilt-adjustment-prints-in-plac I solved the problem of it not staying in place by adding a locking mechanism. You pull the adjustment knob out to adjust it and…
Tool to make tramming the Bambu Bed easier. The OEM bambu bed knobs are really small and don't offer a good surface to grip. The adjustment knob at the back of the printer is especially obnoxious due to its position and the angle. This…
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.
Introduction The weak link in the less expensive Thrustmaster steering wheels is the plastic gear and optical timing wheel. Over time it can wear out and with enough force, it can strip teeth. I was inspired by the Thingiverse models…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
I needed something to make it easier to adjust the knobs underneath the buildplate while doing the paper leveling or when using the Klipper “screw_tilt_adjust” Result is this 12 sided key that fits the leveling knobs perfectly. I kept the…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
This is not my design. It's a joystick remix of a gimbal designed by user Karavan on IL-2 Sturmovik forum: https://forum.il2sturmovik.ru/topic/13252-3d-печатная-механика-объект-77-б/ and shared on Thingiverse and v2 on Thangs. Images and…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers, 4 perimeters and infill 15% for the main body 100% infill to little parts Support is needed…
Made on a colleague's request. Because it's oriented at 35°, no supports are needed. Print it as is. Ø 0.4 : Layer height : 0.25 mm Perimeters : 1.2 mm Bottom/top : 1 mm
Adjust your extrusion multiplier if is to tight or to loose. Remixed from https://www.thingiverse.com/thing:3824154
This remix adds an easier way to adjust tension on the tension cam and, to have the option to use the modified ribber arm with the side-mounted posts with the CSM version from JeepingJohnny (MrRoboto19 remix) or my colorwork yarn mast, an…
Plate needed to adjust the gearbox linkage on a Volkswagen Golf II GTI 16V. Tool VW 3104
Same thread as the original nut. Only modified the outer profile.
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of screw…
Adjustment kit for the Vanos in BMW engines (M52 and M54) I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters. It worked a charm on my engine swapped Z3 who's vanos got out of…
Adjustment gauge for Shimano 12 speed road drivetrains. Set the B-tension screw to align with the proper mark on the gauge. Useful if you don't have the Shimano original. Can be printed with a color change for the text, color the tops of…
Small tool to adjust the bed corners and hold the knob in place while tightening the lock nut. I found that adjusting the level of the bed was a bit of a struggle for me: Because I have big fingers and those little knobs are difficult to…
F1-inspired steering wheel Easy installation just unscrew the old steering wheel by unscrewing the 6 central screws then screw on the printed attachment . The attachments are screwed together using m4x25 screws and nuts Inspired by…
Direct from factory, the K1 Max bed level is awful and the official method for levelling (bottom cover off, reset z-stepper belts) is both cumbersome and inaccurate. I swapped out the stock bolts and spacers and fitted manual adjustment…
In my Tesla 2021 model 3, I have a history of passengers stepping on the seat adjustment knob (the horizontal one that adjusts the position, rear tilt and front tilt of the seat) when getting into or out of the car. I've had to call…
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
It helps you offset pinda and nozzle far easier than paper and ziptie method. Note: It is for newer S Pinda 1.5mm only. For 0.8 older version, you could open freecad file and decrease pad from 1.5mm to 0.8mm, then export stl file. Steps:…
Aquarium floating ring with auto water height level adjustment
It is really useful that BTT have designed the Eddy probe to fit the original stock sensor on the Voron Stealthburner. Unfortunately the sensor is well and truly buried when the SB is assembled. Therefore at least the SB fascia has to be…
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
This upgrade is used to remedy the increased resistance of the Thrustmaster T.16000M throttle after some time. It is possible to add magnets to the model to get magnetic detents at the 50% position. For this you have to glue the Magnet_50…
Simple tool to set or check height of the P.I.N.D.A. sensor. Model provided in variety of heights 0.8 to 1.2 mm.
simple Spacers to Adjust the height of your Cr Touch Probe. Multiple Sizes, Just Add them together to build up the height you need. Or you can just adjust the Height in your slicer.
Hi Internet Sim Peeps, At request, I've whipped up a TMX/T150 to stock Thrustmaster Quick Release hub adaptor. Now, I want to preface this with the fact that I don't have a TMX or T150. I've used reference images and materials to gather…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability and rigidity, add : 6 first and last layers and 4 perimeters to basement and mouseplates 5 perimeters to screw and head of…
This is a tool to make vertical adjustments to a A2 style front iron sight. This is specifically designed for Springfield Armory flip up sights as shown in the original picture. This can be printed off of the base of the tool with zero…
h' I remixed the model from Richard Ferrington for 120mm Fans. Maybe its needed to print Spacer Feets to allow more Airflow https://www.printables.com/de/model/867321-sovol-sv08-low-profile-vibration-isolation-feet i used the 35mm spacer…
I printed the original height adjustment tool which is awesome since it is a consistent reference to set the SPINDA height to, and also because it stows out of the way right on the printer frame after use. However, I have a Bondtech LGX…
ADJUSTMENT SCREW for cabinet ventilation Layer height 0.2
This is a series of Upgrades for the Voron 0 including Voron 0 ZTap Probing ZTilt Adjustment & Knomi V2 Display Full attribution & Credit to the Voron Design Team for the Original Voron 0 design and the CAD files this upgrade is based on.…
Creality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers…
D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…
Minor modifications to lego-like accessories for giant lego wreaths Adjusted internals and transition angles for ease of printing/additional depth for assembly, added “LORGO” text to top of stud Based on these items:…
Qidi 4 plus bed screw adjustment wrench .
Hi Internet Sim Racers! After remaking the Logitech base to Thrustmaster Adaptor... it was minor mods to make the locking rig into a wall mount for your spare Thrustmaster Wheel Rims... There's 3 versions. A) Thrustmaster Rim Wall Mount…
Hall Sensor Bracket replacement for Thrustmaster T300 T300RS TX Worked for me, use supports and enough infill. Hope it helps someone
You can use this as an alternative to a store bought watch bracelet holder when replacing and adjusting them. I've printed it at 0.2mm PLA and it seems to do the trick. The spacing is adjustable and works with many strap sizes. Source…
