Counting matching models…
Extra strong wall hook collection - 6 variations + STEP file
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Updates description at the bottom Overview A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley, adapted for 3D-printing. Variable pitch propellers allow the pilot of an airplane to adapt the angle of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Intro This is a mini bit holder with perfect grip! Try it! You will love it! Now in Version V2: A better variable bit fitting that makes sure every bit will fit. Why you'll love it? Variable bit fitting Suitable for all HEX bits Print is…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
I found wall mounted steps on amazon and thought this could totally been done with 3D printing. Please use care when printing and mounting, use drywall anchors or mount into studs. High infill is a must for strength. If needed scale it to…
Print approx. €11.29–€13.80 excl. taxPreliminary estimate for one variant
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Intro A tiny but incredibly handy bit driver designed to go everywhere with you. This latest V2 update improves grip and usability while keeping the tool ultra-compact . Whether you’re fixing small gadgets, tightening electronics, or just…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…
Print approx. €8.11–€9.91 excl. taxPreliminary estimate for one variant
Printed at 0.2mm resolution with 20% infill and 2mm brim. Works best on carpeted floors.
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
I saw a cool outfit worn by Lana Condor on the Boo, B*tch series on Netflix and wanted to recreate it. In order to that, I needed the same earrings. While I was at it, I decided to make 3 different types to choose from. The color change…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Model Info | Introduction I've seen a similar geometry at a friend's house and thought about a similar yet new design of this geometric plant pot. The angular twisted ribs give it a special “turn”, the central opening is slightly angled…
Print approx. €17.82–€21.78 excl. taxPreliminary estimate for one variant
A stable cable rack with Slot with from 4 to 8mm Print instructions Place the slanted bottom surface on the bed. 10% infill should be enough. Approx. 3hrs Print time in Draft Mode
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. This version has a…
Print approx. €10.61–€12.96 excl. taxPreliminary estimate for one variant
You can build this handle with two of the 3d printed parts. Additional you need a 25mm or 22mm fiber tube of 1mm wall thickness. With “vetro” strips you mount the optional handle between the front and back handle. The superglue is used to…
Print approx. €6.83–€8.34 excl. taxPreliminary estimate for PETGSource material: PET
Hey everyone, i designed a wallmount for my Einhell powertools and thought i'd share with you. You will need something with a 20mm diameter and appropriate length to fit everything you want on it. I've used a aluminium pipe from the…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
(CZ) Jednoduchý pásek za hlavu, který lze připojit na šňůrky na roušce nebo respirátoru. Maska pak lépe těsní, z dlouhodobého nošení nebolí uši a lze ji rychle stáhnout na krk.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
The individual parts of the organizer are connected using connectors at the bottom. For better connections, it is possible to use polygons connectors for high parts. No need glue. No need the supports. For speed print i use draft. UPDATE…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Liked the original design from sarman_1998 , but I wanted to be able to change the angle to fit better in my DIY dry box with KJH 04 - M6 fittings. Remixed it to have a variable angle and parameters in fusion. To change the angle to your…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
To have all top surfaces of the model be at their intended height, you must either use 0.1mm layers everywhere (except 1st layer), or you can use 0.3mm layers with thin layers only where needed to get the correct top layer heights. Using…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
I printed this Miter Clamping Tool with Fuzzy Skin on the outside in Prusaslicer. This gives the clamping tool more friction on the surface of the wood. You could also glue a piece of sandpaper to the clamp to add more "sticktion". I…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
The bookRING Pure design bookend in 3 variations. Printed quickly, no supports needed, only 2-3 mm thick. All rings do have 150 mm diameter and are 200 mm long in total. Depth: 20 mm ------------ The bookRING Schlichte Design-Buchstütze…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Used components: DPS3005 Programmable Step-down Power Supply WX-DC2416 DC Power Module 36V 5A AC 250V 10A Power Socket with Fuse Holder & Rocker Switch XT60 Female Plug Panel Mount
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for PETGSource material: PET
Hexagonal boxes, in a variety of sizes. For each box half, you'll need three 6mm x 3mm neodymium magnets. Print two halves to make a box and a lid. Recommended Print Settings 3 perimeters (0.4mm nozzle)
Print approx. €21.94–€26.82 excl. taxPreliminary estimate for one variant
Introducing the Pentagonal Flower Pot with Vertical Stripes, a piece that stands at the intersection of avant-garde design and horticultural practicality. This unique pot takes the timeless pentagonal shape and adds a layer of…
Print approx. €18.68–€22.83 excl. taxPreliminary estimate for PETGSource material: PET
If your children learn to dress themselves it helps them to see where what clothing item is. Especially if you are often reorganizing the cabinets. With the different shapes of clothing you can easily see, in what drawer what item is. The…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Multipurpose strut/spring spacer (english is not my native language, I couldn't name it properly :D). I was sick of looking at bended documents in ikea tjena organizer, so designed something to fix it. But it can have a lot of different…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
The basic version of the box has 3x3 sockets. The box can be freely enlarged by connecting additional sections. The individual boxes can be connected with a screw and M3 nut. Additional boxes can be connected from the top, bottom and both…
Print approx. €6.73–€8.22 excl. taxPreliminary estimate for one variant
Use as retrofit kit for the Aereco ZFH 5-35 moisture-controlled external air vent or as spare parts for the ZFHV 5-35 with lever. The pin and shutter lever converts the ZFH 5-35 to the ZFHV 5-35 and allows for a manual override of the air…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
a wind tubine hub mechanisme made to be printed witheout suport. there is to parts, the hub and the top cover for the hub.
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
What this is This is a spool intended to fit large quantities of spool-less filament to respool it onto a "normal" spool. It could also be used as a variable refill spool. Through my own stupidity and a “little” accident I dropped an…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
My daughter likes threaded bottle caps and other threaded things, so I made her a few threaded shapes.
Print approx. €10.17–€12.43 excl. taxPreliminary estimate for PETGSource material: PET
Cable holder adaptable to various thickness tables
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Descrep supports for the Edifier MR4 speaker set that gives you the option to select from 7 different angles thanks to the little slots in the main support this way you can find the angle best for you.
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
Print with 3-4 perimeters from PLA or PETG. Scale to any size! To learn how to design these yourself, watch the tutorial .
Print: On the side
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
6 different sizes M3 corner mount brackets: 25x25, 30x30, 35x35, 40x40, 45x45, 50x50 mm ( Parametric STL )
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Static_part , joint 1, joint 2 can also be combined with version 1. Numbers of printed butterflies: Butterfly_cover_long.stl - print…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…
Build it as high as you want! I recommend printing with fuzzy skin.
Update 2023-12-28: I made a variant with a date tag which you can find here . ------------------------------------------------------------- I know there are a lot of nice bag clips here already, but I wasn't entirely happy with any of…
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
Customizable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its customizable design saves space and allows for easy customization and expansion when…
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Version 2: https://www.printables.com/cs/model/529125-variable-mobile-phone-holder-with-clamp-v2
Introduction The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet , afterburner and variable exhaust nozzle. For this build you'll…
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
My Tool was only some mm longer. Thanks to the supported f2d files i've modified them so you can set some parameters: (len) Length of the box (ToolEndRadius) The radius of the tool end (HolderDiameter) Diameter of the tool holder…
Variable Openmod This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-52mm drivers. The overall design itself is…
This is a bracket to relocate the front crossbar of the Ender 5 Plus to get a better view of the build plate. You may locate the crossbar at any height you find suitable for your setup. Also consider printing the End Covers that protects…
A remake of woodpecker's box clamp - but completely tool free. Just add an M6 bolt, washer and a wingnut
These can be printed with some support to end up with a crisp overhang and a clean print. These are hung with a command strip and should support the weight of ears and an empty bag. To ensure good bed adhesion you can certainly add a…
The original Multi-sort sorting tray was designed for common 3D printer parts - M3 and M4 nuts and bolts and other small items. The Multi-sort V2 is designed for more variable sized objects like Lego. It has larger side chutes and…
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
Overview : I wanted to replace old, poorly printed jumper wire holders with something that would work well with a tray I made from ½” birch plywood that is carved out in the middle for Clickfinity plates by NoWarranty (…
Cord Wrapper, Flat or Curved Surfaces, Variable Diameters 4-14 in (100-356 mm). Secures flat or round cord (.25 in/6.3 mm diameter or 5/16 in/7.2 mm). If this isn’t exactly what you’re looking for, check out my other design here that…
A remix of barebaric's design . The primary difference is that it's easier to insert/remove the wire comb into the slots, but it's still secure enough that it doesn't fall out (fitting mechanism is shown in one of the images). Just make…
The boxes come with different sized areas to apply labels: 6 mm, 8 mm, 12 mm, no label. Each set has boxes in the following sizes: 1x1, 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 2x4, 1,5x2. All boxes with width 1 also come in a version with a center…
This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-70mm drivers. The overall design itself is also made to be easy…
This is a remix of the original variable pitch propeller mechanism designed by Chris B. After printing and assembling the original model, I decided to make several small mechanical improvements to improve the strength, rigidity, movement,…
I designed these tiles some time ago to easily see all my available filaments. Before I just had a lot of different benchies lying around but I found this to be impractical an wasteful of my limited space. I challenged myself to make this…
Wanted something to keep my hat brims in tip top shape and could only find one model that was alright so I made my own.
Can print without supports, standing up on end.
Designed for 0.4mm nozzle with extrusion width set to 0.6mm. See below for other settings. This container is quite rigid for a vase mode print, partly because having double walls, partly due to the thread pattern, and partly because of…
Time for my first Fusion 360 Project. Headphone or Headset holder with a variable design that anyone can adds a favorite color accent to fit perfect in your own workspace. Print settings: 0.4 nozzle 0.2 mm layer high Print the Holder with…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Here are a number of remixes of the nice side Mount Lack table sheet holder by Slider. A two-slot version A three-slot version A three-slot version which has also been 'shortened' Print instructions I printed with 0.20mm layers PLA,…
I gathered several ideas from the net and added variable feathers to the concept as well as a modified track bar for the BOSCH GTS10XC table saw. The distance of the feathers to the saw blade is given by rotating the board around its…
This model had been exclusive to my Beta Squad tier on Patreon for some time and they will continue to have some exclusive parts and upgrades for it, but it's time I offer this up for everyone. I have made an assembly to guide to make it…
This slow bean feeder provides consistent, controlled feeding of coffee beans into DF64 or DF64V grinders. Features: Variable Speed via potentiometer USB Powered (5V) with optional LiPo battery support Direction Reverse with push button…
A basic router jig for installing door hinges. STL file is for a 3.5in x 2.1in hinge with .1in depth and 5/8in radius. Using OnShape link, you can set hinge and router entrance dimensions using defined variables. These are slightly…
Configurable Box in Freecad using Spreadsheet. Length, Width, Height, Wallthickness, Drillholes can be modified on a easy Way.
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/190120 The print settings in the print profiles have been tested. PLA prints in 16 minutes & PETG in 18 minutes. ==== Protect…
World's most advanced open source headset! A fully open source headset based on the Variable Openmod Part 1. These are parts used to modify the Part 1 into a headset. So you will need parts from Part 1. This is likely to be the last…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
The original Spring Thunder was too big for my liking, so I made it short :) This remix, based on Lyzaaa's remix of GDop26's Spring Thunder blaster, shortens the original blaster for a more compact and maneuverable profile. The magazine…
Stackable ammo boxes in various calibers with sliding lids. Designed to take up minimal storage space. This version uses rounded edges on the lid. It's more ascetically pleasing but some printers/filaments may struggle with bridging. You…
Parametric version of the LR3 strut plate, to allow arbitrary widths. Leave a comment if there is a particular size you want and you can't (or don't want to) use OpenSCAD to customize yourself. This is derived from the LR3 strut plates,…
A set of several farm rakes with long handles and metal-like end caps. These are a part of my current work on farmstead scatter props, and can be used along with my other designs in this series to quickly print and populate a tabletop…
This is a Jig inspired by “Der Holzbastler” to use Domino Dowels without spending a thousand bucks for the Festool machine. The mechanism is perfect for dowels with 22,1 mm width and different thicknesses (at least 6 and 8 mm). I now…
Cryptex with a 6-digit numerical combination. The combination can be changed to any number 000000 - 999999, but only when the device is open. Update: Added the reworked retaining ring file by Inglebard . For some users, the reworked…
The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR…
racket dampener that covers more strings than the ones you can buy, you can vary the height to vary the weight of the damper, and length to adapt to your strings
I bought an USB variable voltage regulator from Aliexpress (source: https://www.aliexpress.com/item/33008113832.html ) and designed a case for it using Autodesk Fusion 360 Print instructions Category: Electronics Print Settings Printer…
Резак для бутылок с переменным углом резания 8 мм.
For my CR-10 Max I did my own kit which allows you to use belt which different length (approx. 1200mm to 1600mm). This Kit only works with the “on top of flipped brackets” pulley setup, but is very minimal and creates not unsymmetric…
Honeycomb Storage Wall Inserts; Slightly more refined versions of M4 and Multipos with alternate tab versions. 6 tabs for max holding power, 3 tabs for moderate holding power and 0 tabs for primarily test location finding before locking…
