28 models
This is a Heavy Duty storage case. Internal storage capacity is 83mm (width) x 132mm (length) x 21mm (height). Your contents won't get crushed. Best part it was designed to stand vertically. Now you can get your life organized the right…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
With PrusaSlicer slice the model with a layer height of 0.2mm. Add a pause command at layer 63 (12.6mm layer height). Don't be confused: The pause command takes effect at the beginning of the layer, the slicer shows previews of the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from above, the intricate latticework reveals a captivating…
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
Note: there is also robust heavy duty vertically printed mode: https://www.printables.com/model/337795-parametric-hinge-vertically-printed-robust Info: i have remodelled and made a great model from @Meistel Edel (thx!) parametric , so any…
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
See my newer model for a remix of this in a complete project: https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to…
Behold the greatest bucket handle to ever exist, made to spread the load over your fingers better than the stock handles. I made both a version that fits the common handle size on most 5 gallon buckets (see pic.), and another version that…
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). This specific…
I needed to place my BTT Hdmi7 on the side of my enclosure, so I made this remix of the very nice case made by @ Artxime . There is a version for both 2020 and 3030 extrusions. I also added some holes for zip ties. Insert the zipties…
This is a sanding/grinding table add-on with the Flexi attachment mounted vertically for better access to the sanding drum. If you have the Dremel Flexi attachment, then it comes with a plastic clamp to suspend the tool to use the Flexi…
Keeps your dooms day device from being deactivated by accident
Reworked very nice case made by @NickiDotDK and @Artxime To fit Voron 2.4, hinge printed from ABS, other from PLA 4xM3*12 for display 2xM3 nut din 934 for hinge 2xM3*10 din 912 for hinge 2x Roll-In T nut 2020 M3 for hinge /* or other T…
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees placing the screen at a more ergonomic height (using an external keyboard & mouse). Print fit-test Take 10 minutes to download and…
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). These specific…
brilliant idea from the original version, but i need the headphone jack on mine facing down for how i use/wear it.
you will need M5 50mm hexagonal screws, M5 Nut and an M5 50mm Allen screw to fix it to the frame near the rear axle.
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). This specific…
Don't print horizontal. Scale down the x, y, and z axes to 10%, rotate 90 degrees and print it vertical. This doesn't serve much purpose other than looking cool and has some toy value. It creates patterns of reflected light that look…
When space gets tight, parts need to be repositioned. I'm upgrading my little Voron 2.4-250 from a 24V Octopus setup to a 55V Kraken setup. The larger components make the electronics compartment very cramped, and I have to reposition some…
What bothered me about other PSU cover designs was that the USB cable stuck out at the back. Of course, I could have bought a 90-degree cable, but instead I decided to create a revised version based on the original Prusa XL PSU cover STEP…
The frame is the same for all three versions. Just the mounting points vary.
This L-Plate works as an adaptor, you'll need a 1/4" hex nut, a screw for camera plate, and an ordinary phone clamp with 1/4" screw hole.
- Alle Anpassungen auf eigenes Risiko - Faston Stecker auf 30 Grad biegen oder ersetzen. (habe meinen ausgetauscht) Beachte die Position des Steckers (siehe Bild) Bei Bedarf im Bauteil “xLCD-Front-Cover” einen "xLCD Reflector" einkleben -…
Vertical barrels and built in brim for easier printing (i hope). Ive printed 18 barrels with this built in brim with no issues. Ive tested a Hobo-barrel (play on robo-barrels) setup with long draw Woose and 1/2" cord and averaging 360-380…
Here is a holder for the Anderson Powerpole PP15/30 connectors when mounted in a vertically stacked configuration for when you need to store them under a freemo-n module.
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from above, the intricate latticework reveals a captivating…
![Dremel / Ozito Flexi Attachment [Vertically Mounted] Sander/Grinder](https://media.printables.com/media/prints/159207/images/1485587_bdf06fe7-8387-427e-bfe9-64005cf950f7/c05049e7cad7c646280ae12cfc7b6682_display_large_15.jpg)
