Counting matching models…
The design is fully tested but the documentation is work in progress, Please message if there any queries. Last edited 24\09\23. Attribution & Credit to the Voron Design Team I am not quite sure if this can be classed as a formal remix…
Improved connector for the lovevery play gym that lets you fold your play gym for easier storage. Ensure the mat is securly attached to all legs while in use. Print Settings Print in PETG or PLA 3-4 Perimeters for additional strength 30%…
Easy-print bracket to replace one that was missing on a LOVEVERY Play Gym. Requires one screw to hold it together, washer optional but a good idea. Ideal part is an M10x1.5 x 45 mm Button Head Cap screw, but any M10x1.5 x 40-45 mm screw…
Sliding sled as a replacement for the Vevor cross sliding sled (https://www.vevor.de/gehrungslehre-c_11020/vevor-gehrungslehre-tischkreissaege-600-mm-miter-gauge-ablaengen-winkelanschlag-p_010718981691) for the Bosch GTS 10 XC table saw.…
(I found a cheap used Shimpo wheel recently, so I didn't refine this system any further since i got rid of the Vevor one. it's still a bit janky but it does work.) Needs 8x M3x16 (or longer) socket head cap screws. Or really, any other M3…
A beautiful minimalist painting of a Squirrel on the wall. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15 % Filament: PLA Notes: Top/botton pattern - concentric…
Printed with PLA Plus at 220 °C with 0.28 mm layer height. no support needed 😎 needed: M3 insert nut M3 screw
I wanted a portable metal bandsaw that I could use upright, Diresta-style in my bench vise. I bought the Vevor 5" portable bandsaw with miter base on Amazon (link below) and designed a table plate to use the existing hex-bolts to secure…
Vevor Mini Lathe DRO mounting kit (YS-2260A). The "Apron.STL" that I used for modelling the parts is from https://www.thingiverse.com/tonycstech On a small lathe it is very hard to find an acceptable mounting spot for the x-axis scale. I…
Ice age Veverka verze2 s podstavcem.Podstavec a veverka se tisknou zvlast.
Adapter for the Vevor airbrush booth, allowing the exhaust outlet to be on the side. If, like me, you need to save some depth on your workspace... You should print it with a plastic that has good layer adhesion for more strength at the…
The Y endswitch holder was the only part of Ghruum's collection that I could use for my Vevor 3018 CNC. Fortunately, he provided a STEP file, so I could isolate it from the other parts. I also added a new actuator wing. The whole design…
Parametric Dial Indicator Holder for Vevor Lathe (YS-2260A) Required printed parts: DialIndicatorHolderBottom_square_nuts.stl (1x) or DialIndicatorHolderBottom_hex_nuts.stl (1x) DialIndicatorHolderTop_square_nuts.stl (1x) or…
About It gets pretty cold where I live and the heater I bought wasnt cutting it. Everyone has one of these diesel heaters according to youtube, so I decided to try one. The intake and exhaust come out of the bottom and if you dont put it…
I couldn't find any existing models that fit my Vevor 3018 CNC - so I designed limit switch holders myself. They are quite specific to that machine and my use case … but maybe it helps somebody else :) Print one limit switch holder as-is…
Fits the 6mm od tube
A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…
The Vevor table saw gauges come with a standard 3/4 x 3/8 " gauge slot rail that does not fit on the Bosch GTS 10. I designed a fitting replacement for it. You need an additional M6 nut to complete the part.
Made the wago mount for the electronics bay fit 3030 better.
We got this nifty little pottery wheel to use for wet-sanding custom resin dice, but it didn't have a splash guard and I didn't find a design available. So, here's my stab at it.
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
Pick the appropriate file for your desired t-nut and cap screw combo. I've created both M3 and M4 versions, both use a sacrificial support layer which you will need to punch/drill out with the matching drill size. (Why do I use M4? It's…
3D Part which allows us to place a Macro Lense into a Vevor SC240M Thermal camera. Should work with Infiray C200 and other cameras with same housing. This holder works with 20mm Lens, the only thing is needed is the lens, and two small…
Seems strong enough for decent clamping force. Normal TPU print settings apply: no retraction, slow speed, light extruder tension, etc. Looking at amazon there are a bunch of identical looking 4.5 inch vises so they'll fit those other…
Made this as a new puzzle base for the Lovevery shapes puzzle for toddlers. My kids were good with the original but liked making the blocks into different shapes so I made a new one for them! Gcode files are of the v5 model sliced in half…
I have a diesel heater from Vevor for camping. I designed this cover because the display is built in and is not water proof. Now the heater can stay outside without any modifications. I designed the cover so it does not need support. Just…
I was frustrated to see that the Vevor diesel heater air inlet was a special threaded attachment. This adapter will thread into the Vevor Diesel heater housing and adapt to the standard 3" or 75mm duct size. The adapter also aims to take…
My partners vevor pottery wheel doesn't have the option to use bats which use these standard mounting bolts. We tried some available 3d models which weren't really satisfying to use. To save as much filament as possible and to fit the…
Simple covers to avoid marring workpieces
Add fun textures and patterns to play dough with this set of 5 stackable play dough rollers . The rollers are designed to be easy for little hands to use and can be neatly stacked together for compact storage. Lovevery Compatible The…
This adapter allows you to connect a standard 80mm duct/hose to your Vevor 2kW diesel heater. It is designed to replicate the original bayonet locking mechanism for a secure twist-and-lock fit directly onto the heater unit, providing a…
Allows you to install the heater outside but still recover the air from inside making it more efficient. -Printed in ABS. -0.4mm nozzle. -8 x 3 mm magnets.
As a retired machinist most lathes I ran had some type of chuck key holder, always metal, that someone made. I wanted one for this home lathe to prevent it from getting misplaced. It uses the same screws that hold the gear cover plate…
VIDEO TUTORIAL: Watch this tutorial video for use of this printed pulley in upgrading an affordable VEVOR brand band saw to triple its horsepower! “DIY Woodworking Upgrade: TRIPLING power of my (affordable) VEVOR bandsaw!” Purchase links:…
Designed for this molecular Sieve but can work on any that have a diameter of about 50mm. Standing the sieve up is important for saftey as it reduces the amount of moisture and water that can end up in your tank. The model this is remixed…
Here is an adapter to convert the Vevor diesel heater from 4 small pipe to one 4 inch dryer duct. The piece need to be printed with a filament that have high heat resistance like Nylon, PC or something that can stand 125 celcius (250…
The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…
*PRODUCT LINK to buy the milling table The handles for the two hand wheels on the VEVOR Milling Table (17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis) are both too loose, having a screw hole that's too big for the screw, and…
... a simple hack.
To complement my mini lathe hand tool holder for the Vevor mini lathe, I have made some QCTP holders to go along side. I was inspired by https://www.printables.com/model/604708-axa-qctp-tool-holder-rack and a few other models to hang the…
Made for printbed size 300x 300mm Printsettings is; -No brim or skirt. -100% infill(realy not important since its just two layers). -Print at 215* at nossle and 60* at bed(PLA). -0,25 layer height. -If topsurface is rough, adjust flow…
With those clamps you can place your entire build plate into the ultrasonic cleaner. At optimal fill height, there is about 2cm left on top, so no spilling should occur. Max height of models on the build plate should be around 11.5cm.…
Fan blower positioned to the left with height and angle adjustments.
Organize your mini lathe hand tools , featuring left to right: head and tailstock chuck key spots, a MT2 morse taper spot, 2-6mm hex key spots, a cup for random items, and a tray for oiler cup/bottle/some other stuff. The brackets snap…
There we were, ice maker running, scoop a-flying with no landing spot in site. We used a tea mug for awhile. The mug had a mind of its own and we’d find it in strange places. This scoop holster attaches with magnets. Scoop fits in it and…
Created a simple little cap for the basket leg of my Vevor ultrasonic cleaner after it arrived with one missing. Maybe it'll fit other baskets/brands. Cap is 6 mm x 11 mm, hole diameter is 3.5 mm. Its snug enough it doesn't slip off and…
I use these pins to support twine in my seedling setups.
Key for Vevor Electric or HAM Antenna box. Steel, IP65 (20x20x6" and other sizes). https://www.vevor.pl/obudowa-elektryczna-c_10749/obudowa-elektryczna-ze-stali-vevor-20-x-20-x-6-cali-ze-stali-weglowej-ip65-p_010919962274 Printed from…
Socha veverky s designem Low Poly. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Easy to print holder for red Vevor remote control
Here are a few hooks for the VEVOR metal pegboards. I needed to print my own since they don't sell the accessories separately. This is remixed from the awesome DDD Printable Wall Control System by luma. Please download whatever spacers or…
Bought a budget Vevor swing away 15x15mm heat press and found the front edge of the 15x15 plates were way out of parallel, by roughly one half inch too high on the front edge! I decided to try to fix the instead of returning and came up…
This is a replacement bearing hub for a VEVOR branded pottery wheel. The same pottery wheel is sold under countless other brands on Amazon/Aliexpress/wherever, and obtaining replacement parts for this wheel is impossible. Re-use the…
Here are a few hooks for the VEVOR metal pegboards. These are compatible with the DDD Printable Wall Control System by luma. Please download whatever spacers or centerpieces are appropriate from his github. Located at:…
Vevor Pottery Wheel Leg riser to change the height for the potter. Design dimensions: Outside bottom radius = 60mm Inside top radius = 31mm Outside top radius = 33.5mm Top recess = 40mm tall Overall height = 200mm tall Effective Height of…
Reduction for size change 75mm to 50mm, for Vevor diesel heater and all other brands
Strain relief for a Vevor or UScutter vinyl cutter for the usb port. Cutter brace - Little thinner and should work the stock nuts and bolts Cutter brace V1 - is just little thicker and moved the usb port to the right a little bit. When…
This is a holder for all the accessories of the Vevor belt grinder for 762x25,4mm belts. It includes a cover and a section for the belts with flexible labels. The holder will be positioned behind the belt grinder and uses the holes of the…
Adapter to insert your Samsung Galaxy S24+ into a Divevolk SeaTouch 4 Max.
No Support, 10% Infill, Print vertikal Fits Perfekt w/o transparent Sleeve. 101% Should to the Trick if Sleve is on Maybe old Version of Remote see Pictures! Example…
This simple gadget allows you to better utilize space inside VEVOR mini caming fridge. I attached it with doublesided tape.
This is a small pad I designed to use with the VEVOR sim steering wheel stand. The pad is roughly 175mmx175mm and I use it as a small mouse pad, but it is sturdy enough for lots of uses. I had some leftover class 8.8 (M8) allen bolts and…
support_heater These support legs are designed for the Vevor Heater to increase stability, elevate the heater above the ground, and reduce heat transfer to the surface. They improve safety and allow better airflow underneath the unit.…
Voron Z-Chain move mod to better support canbus umbilical setups but for VEVO printers (Voron with 3030 profile)
Vevor Track Saw Dust Cover for model Number 8140
Small washer insert for 45 rpm singles. Use them to wash 7" vinyl singles in Vevor ultrasonic vinyl cleaner.
Snap-on holder for Ikea Vevelstad bed frame, designed for holding a single book (or any other object in a similar shape). Made it because I do not have a bedside table, but still wanted to have an option to keep books close. Max thickness…
Z End Stop for CNC 3018 Vevor on drag chain X axisEnd Stop for CNC 3018 Vevor on drag chain X axis
Small storage that fits the Vevor vinyl cutter to store wires and accessories. It was printed with a 0.6mm nozzle with 30% infill in PLA On one of the trays, there is a small hook to hang the color samples.
A fume extractor filters harmful fumes created by soldering or other processes. When soldering, fumes are created by the heated flux. They contain VOCs and gases that are harmful. Activated carbon filters are used to capture these by a…
Nahradní závěs pro kompresorovou autochladničku VEVOR 22L tisteno z PETG
Deckeldichtung für Vevor JPS-10A 2Liter 175x160mm Mit Pattex Classic Kontaktkleber befestigt. Filament: TPU
A set of holders mounted on the guard for a mini metal lathe. The holders allow for the storage of lathe tools and other lathe accessories.
The adaptor plates allow you to mount the Vevor casters (2 inch, GD60FD) to your RatRig V-Core 4 500. They allow for clearance on the front Z stepper motors. I used an M8 to M6 sleeve reducing nut to screw into the M8 threads on the…
Allows direct connection of 6in AC hose to 8in VEVOR inline fan. Small dia side fits inside the AC hose, large side fits outside the rim of the fan intake. Designed to friction fit to allow quick connection. OnShape Link This is part of…
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
I simply copied the original, improved it for 3D printing and made the cut hole much smaller.
Deckeleinsatz für Spaghetti-Eisbecher von Edeka, Aldi oder Lidl. Senkt den Verbrauch von Reiniger bei kleinen Teilen. Das Gerät mit Wasser wie gewohnt auffüllen und dann die Reinigungsmischung nur in den Becher füllen. Für Vevor JPS-10A…
Plate that comes with router is not perfectly round and is small, not stable enough. So i made one for my needs. It doesn't use standard (makita clone) spacing for screws so i had to start form nothing. Included are 3mf file if you just…
End cap for Vevor Greenhouse/Polytunnel. Designed for 0.8" steel pipes used in the Vevor Greenhouse/Polytunnel. Print in TPU for best fit, designed to be slightly larger than the end of the pipe for added protection of the cover.
Endstop to designed for the Vevor Evolution 8080 CNC for use with M5 Screws included with the CNC. I used this for my Z axis limit switches. Printed in PLA. 35% Infill
A storage box for change gears and chuck jaws for a Vevor mini metal lathe
Vevor Lathe Gearbox Spacer Fix. The idea of adding spacers to make the gearbox safe to use is from https://www.thingiverse.com/reynol32 It is NOT required to disassemble the gearbox to install the spacers. However I strongly recommend to…
Aufsatz-Adapter (ohne Befestigung!) zum Planfräsen.
Nohy s patkami pro nezávislé topení Vevor kompakt 2kw bílý,rozteč šoubů M5 do L 30mmx30mmx30mm.
Need to level your Vevor morphon prep table? Print these legs, remove the factory plastic inserts from the legs, remove the nut and install it on your newly printed legs. You can now turn the leg while holding the wheel to level the…
The Vevor honey extractors don't come with rubber feet, I assume they expect you to bolt it down. Which I am not going to do in my kitchen, so, I designed these TPU feet with snaps that lock them on. I printed them with fuzzy skin to try…
it's a triangle
3 makes posted here: Controller holder: A little box for the controller. I have marked the mounting holes and cut two 5mm threads to mount it. You can cut thread or glue it if you dont feel like cutting thread. Spark catch: 150x150mm…
Update as of Sep. 16, 2022 Added an external box for the network, USB and Udisk extensioncables to end from the Ruidacontroller ------------------------------------------------------------------------------------------------------ I have…
I designed this thing to replace the keys on my Vevor brand steel enclosure with knobs. Since my enclosure is in my garage, the keys were very inconvenient. These knobs press fit into the barrel of the keyed latches. So the knobs are…
Hey makers! Brief I'm sharing an 80x80 cooling fan adapter and cap for the VEVOR 2.2kW ER20 24000RPM 400Hz square spindle. I haven't had a chance to test it on the other square spindles from VEVOR, but very likely this adapter will work…
The pegboard is from “The Adventurer Play Kit”. I printed replacements in PLA.
Simple adapter to connect a DeWalt Stealthsonic vacuum to a VEVOR planer . Thin adhesive foam pad can be added for a tighter fit if needed, but it works properly as it is. A straightforward, practical adapter that gets the job done. ;)
Mod to use a Vevor foot pedal (the type that comes with the one you buy on Amazon) as a hand controller on top of your desk. Allows for more control over the speed. Parts needed: 1 - 6m x 45 mm screw 3 - 6m nuts 2 6m star washer (lock…
CNC 2013 VEVOR Board encloser with Fan and filter support
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
Uses M4 Socket-cap screws to mount to the front of the machine. The clippings tray under the cutter head can slide out so you can remove the clippings.
