Counting matching models…
Updates 01-03-2023: Uploaded a new redesign. 06-12-2021: Fixed mesh issue with Basin_3x1, updated Basin_3x1.stl. 20-07-2021: Fixed the sizes of BasinCover_3x3, 3x1 and 1x3, small fix parametric parameter. 06-07-2021: Added extra drainage…
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…
Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…
UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…
Garmin (FENIX) watch stand with charging option. All you have to do is print and clip the original cable. There is no need to purchase any additional charger
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print. Versions: Two versions are available: Blank and Faceted. Both function identically, however blank prints…
Combined Stand for iPhone, Apple Airpods and Apple Watch. For Wireless loading an IKEA NORDMÄRKE QI-Charger is used. Works great with iPhone 8 and iPhone Xs (also with original Apple Case). For Watch and AirPods the original loading…
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…
Nothing/CMF watch 2 Pro charging dock/stand
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A single piece/print design of the…
Model Info | Introduction I want to introduce you to an easy-to-print, hanging plant pot (including drainage tray) I designed to make room for new herbs. Three pieces just slide in, no screws, no adhesive or whatever is needed. Timeless…
Update 2: 8/2/2022: Success! I no longer consider this effort a work in progress. This design can really work great once you get it assembled and know what to do to get it running excellent. It is very satisfying to watch it start itself…
The special thing about this cup is that it is much wider at the bottom than at the top, so that it can hardly be knocked over. It is also flat enough to be easy to get into with a brush. In addition, the cup has a storage area at the…
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
This comes in handy when the knob of your water cut off valve (German: Eckventil) from the company Scheel breaks and turns wild without closing or opening the valve. Fits a 4,7mm x 4,7mm rectangles on the valve that is ~13mm tall. To get…
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
There are two versions, the longer one (65) may be better for watches with thicker buckles. Material: Prusament - Anthracite Grey Petg Layerheight : 0.2mm IS (Structural) Support: No Seam painting: If you want, inside the model
I made this remix by scaling up the original model and tweaking it to make it fully FDM printer friendly. The original design by Redsing from Thingiverse looked great, but it was a bit tricky for regular FDM setups — so I reworked it for…
A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…
Use a printing sheet with a smooth surface (to avoid leaking).
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
This yinyang inspired planter comes with water-level indicators and enough space for one or two plants. If your water level is out of balance, simply refill through the water-level indicators and watch them rise. Water-Level indicators…
A small and modern stand for the Garmin Venu 2 smartwatch. I have made the model Specifically for the 45mm version of the watch. At the bottom of the stand, the charging cable can be threaded in, and attached by the clip on the side. You…
This is a remix of https://www.thingiverse.com/thing:3592040 changing the drone LEM into a watch display for your Omega Speedmaster MoonWatch. I increased the scale and added a LEM cup to hold the watch in place. Omega has created a LEM…
This small watering can is shaped like a Cactuar from the Final Fantasy series! Just for fun - it's more cute than functional (the handle is a bit small), but it does work! Pre-sliced file available to print in potato quality (draft,…
Simple PET-bottle and water pipe (25 mm) quick coupling. You can join as many PET-bottles as needed and create water collector. Print Print without supports with 3 perimeters. Put thread to the bottom on the plate (look at 3mf file).
hi everyone, my old are leaking sor i design a replacement. Bonjour, Mon ancienne tête d'arrosoir fuite et n'est pas tres pratique alors j'en est créer une autre. Print instructions i add a big brim to make it easy to print. i you don't…
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
A simple and economical fillament swatch, using about 1g of filament only. It's design too show transparency while printing 1, 2, 3 and 4 layers of material when printed in 0.2 layer height. I recommend printing in standard quality with…
Designed swatches for Spinning Filament Swatch Display - Lifts Swatches from Brad @ FTBT 3D with text for filament type. Following swatches are available. PLA PLA+ PETG ASA PVG FLEX Printing Settings: 0.2mm layer height turn on ironing…
Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…
Converts 3.8" to 4mm measures for using Micro Irrigation Water Pipe Tube
This is a opener tool for a Citizen ProMaster Aqualand Divers Watch, size medium/ladies. Derived from the Parametric Watch Opener Tool from @BikeCyclist .
Proven on the trail, this is a convenient and lightweight solution for hydration in the outdoors. Great for work or school, too. Attaches with a standard zip tie that tucks into a recess to hold it in place and out of the way. Hook it to…
Half and full size pans for watercolours. They have the same size as Schminke pans.
I like a Nalgene bottle for around town and at work, they’re a convenient size for iced tea especially. But I don’t love the cap attached and flopping around while I’m drinking. This little loop zip ties securely to your Nalgene to give…
ein Behältnis für Abschminkpads und Wattestäbchen
A little capybara model that is just perfect for birthday swag / goodie bags! It was a great success with my daughter's friends. Easy to print, these can be printed in a single-extruder printer with a change of filament to get the desired…
A remix of the original model (linked below), I wanted a simple one-click print solution for an infill-percentage swatch. Print in two colours to get the nice effect! Solidworks model is also included should you wish to modify it further.
A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…
Some credits go to David S for creating the gcode, 3mf, and contributing to designing part of the diagram itself. Colors: From bottom to top White Light Gray Yellow Green (Prusament Opal Green) Greenish-Brown (Prusament Mystic Green) Blue
FISH CARP FRESHWATER COMMON KAPR RYBA
Wanted a dock for all my apple products. Adapted KacperL's design to add in iphone and make the airpod's charging wireless. This dock was designed to work with all apple watch sizes. The airpod pro portion of the design was designed to…
I needed this to fertilize tiny seedlings without flushing them away. This should fit most EU bottles. All the other shower type caps I tried were leaking around the thread, or did not fit at all. If the holes don't print clean enough,…
Ich habe einen Moosstab entwickelt bei der man eine transparente Folie auf die Rückseite befestigen kann. Dadurch kann man die Wurzeln im Moosstab erkennen und gleichzeitig wird das Moos langfristig nass gehalten. ich habe die Folie…
I re-created this lid latch part for zak! water bottle. Printed in PETG with organic supports. Recommend printing in the vertical orientation with 8mm outer brim.
The included steel water dish holder makes it impossible to remove the dish to refill it without it suddenly releasing and spilling water everywhere. This was a replacement holder for "MidWest Homes for Pets Snap'y Fit Stainless Steel…
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Convenient wall mount support for charging your Iwatch. Print instructions Printing position: back face down Rafts: No Supports: Yes Resolution: 1.5mm Infill: 10% Speed : 50m/s Nozzle temperature: 210 Bed temperature: 50…
Replacement for Step2 Showers Splash Pond Water Table Part M, likely it will fit several other Step2 splash table sets. Unfortunately supports are required.
I little gadget to charge his Apple Watch. I made it with Fusion 360
Designed to utilize the holes inside an IKEA Billy to attach the charger of your Apple Watch. The awesome original model wasn't wide enough for the newer Apple Watch Ultra so I remixed it. This one is called the The BAWUCH (Billy Apple…
Simple yet useful accessory meant for epic Honeycomb storage wall that can be used for attaching Samsung Galaxy Watch4 charger. It has a fairly simple design and can be printed in about 30 minutes. It is mounted inside empty insert, which…
I was unable to customize matez' filament swatch because my personal license of Autodesk Fusion does not allow me to open or import Autodesk Inventor files. Instead I removed all text elements from the provided STL file and placed…
Tidewater 232 LXF 2022 Center Console Boat Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This is one of my IKEA ORDNING collection models, take a look at the others below: Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. Folding dish drainer clamp hook, for big pots - IKEA ORDNING ORDNING Dish drainer feet…
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
This is a bedside Every Day Carry (EDC) caddy. I built this for: a built in watch charger holder for the Samsung Galaxy Watch Ultra a ridge type wallet with money clip (and a lot of cards A pocket knife slot (I have bench made with pocket…
Nur das Zifferblatt, kann mit beliebigen Uhrwerk verwendet werden. Only the dial, can be used with any movement.
MAJ du 13/08/2025 Rajout d'un bouchon doseur et de son joint d'étanchéité. Addition of a measuring cap and its sealing gasket. B1-JointDoseur.stl, STEP B1-bouchon carre Doseur.stl, STEP MAJ du 08/10/2024 1 new size: 110 cl (this is the…
A Water Bottle Storage Box to store your Tools on a Bike Trip. Use at your own Risk.
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…
Purpose: While turning on or turning off the coffee maker, it is cleaning itself and some anount of water flow out to waste water tank. The tank is small a you have to clean it every day. Using this funnel you can put the waste water into…
Full size pans for watercolours. They have the same size as White Night pans.
A simple lid for the watertank of windshield wiper fluid/water for citroen picasso C3. Has a loose fit, but its held by a string so the lid cannot fall down and disappear like the original one:-)
Where i live the replacement buttons cost very little to buy but dont last very long. So i decide to make my own. Im new to modeling the V1 i made 1 year ago but had fitting issues and it was very thick. The V2 is the latest version with…
This system is designed to be permanently fitted to a garden water butt, to allow excess clean water (for instance, from a kitchen tap while waiting for the water to heat up) to be easily poured in and reused in the garden. It is…
Vodník / Waterman / Wassermann Vodník / Waterman / Wassermann 20 cm (two colours) Wall art or teplate for frottage or matrix for graphics
Attention!! This Model is not water resistant! It can protect the electronics only from FEW DROPS. Be aware! PETG is not tolerating heat. Watch the regulator temperature!. Or use ABS to make the box from it. (for ABS gcode do a comment,…
If you're long enough into specialty coffee or tea and successfully climbed out of the rabbit hole of mixing the perfect brewing water yourself, you will eventually buy a more reliable water filter system than those table jug or pitcher…
This is a simple insulated bottle container. It's designed around standard 500ml water or coke bottles. It may keep water or beverages cool for longer time in heat days. There are slots for a shoulder strap. A 25-30 mm strip of fabric is…
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
I don't have multi color capabilities since I have a Mini. Also, I like having each swatch labelled with the filament type.
A Well on the Cooler Master MasterLiquid Atmos CPU Cooler.
Um die Uhren Zuhause schön präsentieren zu können habe ich eine Uhrenständer gemacht... To be able to present the watches nicely at home I made a watch stand...
Ich habe diese Ladestation für mein Xiaomi 12T und meine Xiaomi Watch 3 Active mittels Fusion360 konstruiert. Über den Prusa Slicer umgewandelt und dann mit meinem Ender 5S1 in mehreren Durchläufen gefertigt und getestet. Ich hoffe, sie…
Hello, gnomarell, the gnome watching construction works. Thanks for your download, enjoy the print.Hello,
Two-piece flex puck to hold the Pixel Watch 4 watch charger and its attached (non-removable) cable. The original idea came from this Pixel Watch 4 Charger Puck by @Drop_3D . I wanted to play with printing flex filament and to design a…
This is a simple holder for 48 watercolor full pans. The base is sufficiently thick to allow for some stiffness, while the walls are the right thickness for 4 wall thicknesses without excess infill space. The print shown was completed on…
Halterung für eine Wasserspenderpumpe (5-Gallonen Flasche) um sie direkt an der Matschküche zu befestigen. Der Schlauch kommt dann in ein Kanister, Fass oder Eimer. Mount for a water dispenser pump (5-gallon bottle) to attach directly to…
This is designed for Avery 1" x 2-5/8" labels . You can use label-generator to generate labels like those shown in the pictures. It assumes those template-compatible with the 5160 : 30 labels on a letter (8.5" x 11") page. If you're up…
Fresh water without insect escape. Cut “U” Shape (9x10mm) on sales box, insert dish and add water. The holes at the bottom are very small (2x1mm), so there is no risk of insects escaping (except for the smallest sizes). Print settings:…
This is a replacement of the original part with fewer holes to reduce water usage further. For me the 3 hole version is working great, but it depends on your water pressure. In the picture green is original and pink is the two hole version.
Handles for the hot water / and steam valve Profitec Pro300 with 6 mm valve axis The core (here made of orange Prusa ABS) should be printed from ABS or a similar material, as other materials become soft and deformed by the heat. I printed…
100x160mm sign, reading “under water smoking prohibited”, with art of a cigarette under waves. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign…
I can modifier the dimensions of the holes. My bike is equiped by a two screws with a T25 torx , M4 , between 7 cm at the center. The dimensions Bottle reference : 7.7 cm , 20 cm height , the water bottle holder is 135 mm. DISCLAIMER: I…
Model for a Suunto 9 on this stem: ROSE Square 70mm. The flex parts are used to protect the stem and to improve the fixation.
Deckel mit Griff für Gießkanne 0,5l von Haws . Der Druck erfolgt "print in place", die Ausrichtung sieht man in der 3mf-Datei. Translation: DeepL Lid with handle for watering can 0.5l from Haws . The print is “print in place”, the…
Charger and holder for Kids Smart watch. The magnetic charger head fits into the slit. The watch can be put in place easily from the side. Model of the Smartwatch https://amzn.eu/d/eVKqsG3
I little watch that i am trying to make look like the one in descendants 4.
Einfach über die Lupe stülpen und es gibt keinen Staub auf der Linse. Kann mit Deckel auch zum sicheren Transport verwendet werden. Filament: Case PLA Deckel: TPU
![[v2] Hanging Plant Pot - Plant Pot with Hanger and Water Drainage. Hanging Herbs Planter Vase with Hook.](https://media.printables.com/media/prints/870805/images/6726355_0c4d6ebe-fe4d-460f-9c9d-65ed2e17d1da_464c6a04-f6b1-4f78-a42b-99cf8507d986/v1.png)
