Counting matching models…
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…
The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it…
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
📏 Dimensions Diameter: 64 mm Height: 29.5 mm Easy to scale up by increasing the print scale Supports cables up to 4.5 mm diameter Supports cable lengths up to 2 m (depending on cable diameter) Always wind the required length first and…
This is an auto rewind spool holder which relies on a friction/slip clutch for consistent tension, the spool is held tight on the hub. This is a low profile, easy to print, and hopefully improved version of the Auto-Rewind Spool Holders…
Features: Can wind coils with a diameter of up to 12cm and the length depends on the aluminium profile, acme screw and linear slide that is used and can be as long as needed. I tested it with a winding speed of 500 to 250 windings per…
Avoid twists and tangles by winding with a figure eight pattern. Scale print as desired. I recommend PETG over PLA to avoid warping with usage in hot weather. October 2022: revised model to remove one hole (the original version broke…
Before downloading this version, check out the new much improved single arm version that rotates and tilts, available in my other models :- MT ROTATING MODELING PAINTING VICE by Peter Martin | Download free STL model | Printables.com…
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
I was building my own version of Tom Stanton's hand cranked generator: https://www.printables.com/model/658157-hand-crank-generator My first attempt at winding the coils by hand wasn't pretty, so I designed this part to allow a drill to…
This is a fully redesigned remix of the “Winding Case for Sewing Tape Measure”. I Made it compatible with 20mm (¾") measuring tapes. I also reversed the winding direction to clockwise (righty tighty), and enlarged the divot to make…
This reusable spool sleeve isn't for adapting any other specific spool (though it may work for that, I haven't tried), but specifically has a retaining slot for the filament to clip into when winding from one spool to another, and allows…
Popeye winding up Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Half of this jig goes into a small bench vise for holding the mandrel (SpringWinder-Vise-Base_dBottom), the other half goes over the top to use as the winding crank (SpringWinder-Vise-HandleBase-dOuter). Both sides use an insert…
I absolutely love the auto-rewinding spool holders, but the only place I have to put them is on top of my Ikea Lack enclosure, which works great, until you want to open the lid. I designed these brackets to secure the spool holders to the…
Official german traffic signs from 274-5 (5 km/h) up to 274-130 (130 km/h) in original size of 600 mm. You'll need a multicolor capable printer or use different element heights with filament change in between. At least 3 colors. The mf3…
All functions, including filament rewinding, are fully operational. This mod has no drawbacks. A small update. It may not be obvious, but in order to make the coils spin easily, wash the bearing bushings in any solvent (such as purified…
These upgraded forms have clockwise and counter-clockwise windings so you can choose between delivering vs harvesting energy. Usage notes: Northern Hemisphere Clockwise: delivery Counter-clockwise: harvesting Southern Hemisphere…
Sample Filament Spool Holder for small and medium winding Quite a lot of sample filament I have purchased have been quite a small diameter winding so I have found myself having to rewind due to my previously printed spool holders having a…
Kegel für eine 10mm Gewindestange z.B. zum umspulen von Filamentresten mit einem Akkuschrauber. Benötigt werden 2 Kegel (siehe Bilder) Schichthöhe: 0.24mm, PLA Infill: 25% Cubic je 4 Schichten (Wall, Top, Bottom) Durchmesser: ca. 52mm bis…
SOVOL SV08 Stop the Filament spool unwinding. The filament spool has two skateboard bearing inside, one at each end, this IMHO makes it too easy to turn and as filament is pulled into the extruder the spool can rotate too much causing…
For those of us still too cheap to buy wireless headphones/earbuds. Start with the earbuds in the center and position the chords through one of the openings then begin winding. Once short enough to reach across, bring the connector in and…
The main body of the winder coil holder is divided into 6 parts, all parts are printed lying down without supports. I printed with a nozzle of 0.4 with a line width of 0.6 and a thickness of 0.3. After printing, cut the holes.
Battle of The AI Generated Algonquin Windego. Models received the same prompt, the same cleanup, and the relatively same amount of subdivision, displacement, and decimation in blender. They all needed a second fix in Ms3dbuilder, For…
David Glaze reworked Michal Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
This prints in two parts without supports. The pieces should press-fit together, but can be glued if the fit isn't tight enough
As soon as I purchased a 3D printer, there was an immediate need for a reliable filament winder. At first, like many beginners, I was winding by hand. Then I tried to wind it on a stool, attaching a handle to the spool and shaking it.…
Just print as many segments as needed and a single top part. No support needed.
Spool for flat ethernet cables. The two halves fit in and lock together snugly for a fairly stiff spool. The snap-in drill winding core has a hole for a ¼ inch hex bit so you can wind cable very quickly. Then you can keep the cable in…
This is an automatic winding machine for coiling up small cords, strings or wire. We needed a way to reliably coil up specific lengths of cord for sale in a kit. This machine is the updated version of my original Automatic Winding…
Hello, This s fairly simple spool holder using the autorewind spool bearing from here https://www.printables.com/model/1036478-autorewind-prusa-drybox-for-mmu-no-more-buffer-req You will need paint on support for the slit where the…
A device for fast-rewinding the filament with a screwdriver. Made for standard D200 coils with a depth of 65mm and an inner diameter of 53mm. The cartridge on the shank is 13mm, the outer diameter of the cartridge is 43mm. The difference…
This reel was designed to manage the power cord on a fuel pump that I use at work. Wrapping the cord around a spool was a pain, not to mention the constantly tangled wires. I based this idea off of the little auto-rewinders that they use…
This is a slightly extended version of the winding case by @RelaxedMaker_304200 that accommodates 3/8" tape.
Cardboard Spools are not reliable on Bambus AMS. If the AMS tries to rewind the Filament, lot of the time it will lose grip on the Spool, slips and fails. I was annoyed by my solution to rewind it on empty plastic spools with a cordless…
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: ….I used David Glaze 's Silent Auto-Rewinding Gravity Spoolholder (reworked Michal Fanta 's original Gravity…
This is a mandrel to hold filament spools with holes from 30mm through 60mm. You'll need a 1/4" nut and bolt (about 4" long). I designed it so the end mandrel can be removed without fully unscrewing the nut so it can still be used if you…
This version of the top plate increases the space to pass swatches in the top plate and moves the position of the top open yarn hole. The old position caused the yarn to get hooked onto the wheel screws if the tension was a little lower.…
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium. I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's…
Holds your toroid while you wind magnet wire around it. I've included the OpenSCAD file, so you can adjust as necessary. Based on a design by Paul KL7FLR.
Infill 30% 4-6 perimeters Layer .2mm Jednoduché odstupňované kužely. Stoupání je 2x1mm, díky čemuž půjdou z cívky bez problému ven. Použít se dají klasické, nebo vratové šrouby. U vratového šroubu je výhoda tvarové aretace přímo na…
Model for making vape coils 3mm. All files are attached, you can tweak the dimensions if your printer prints holes with
3D PRINTED DIRECTIONAL DEVICE TO GUIDE FILAMENT WINDING ON A SPOOL. FILAMENT DIRECTOR FOR WINDING PROCESS. Project for 5 cm wide coil. For +/- cm, need adjust.
Interesting that all my searches for this tool came up empty, though I would imagine that this winding crank is an easily misplaced tool. Maybe it was just the way I searched, maybe it's not really required as you can hand-crank the spool…
Needed a way to easily wind the cable for the Kärcher K2 pressure washer, it was just dangling around in a messy loop. Also needed a way to store the pipe when detached, so I incorporated it into one design. I challenged myself to only…
Auto rewinding filament spools using gravity to solve the backlash caused by fast-moving printhead Inspired by https://www.printables.com/model/10370-gravity-spoolholder-for-mmu2s
Filament spool V2.0 for 3D printingmaterials. Ideal for dehumidifying through large side openings. Specially shaped holes that prevent filament from unwinding on its own. Special openings for filament are made in such a way that the…
This solution stores the strap tightly and neatly with minimal filament. This strap storage solution is for the HAUL-MASTER 400 lb. Capacity, 1 in. x 15 ft. Ratcheting Tie-Downs available at Harbor Freight. It may be useful for other…
Winding Road US Road Sign Magnet A magnet of the winding road warning sign used on roads in the United States. This is sized to accept a couple of 8x3mm magnets glued into the turrets on the rear. The images show the “right” version, but…
Designed for knitters & crocheters — no more tangles, just love & creativity! Printing Tips: For best results, print with variable layer height to ensure smooth curves and surfaces. Use a 0.2 mm layer height and enable seam at back (or…
Gramm Hand Winding: Melody at Your Fingertips Introducing the Gramm Hand Winding music box - a delightful 3D-printable creation that brings the joy of manual music-making to your fingertips. This charming miniature record player produces…
To use a serger you usually need 3 to 4 spools of thread. If you don't want to buy so many cones at once you can wind the thread from one cone onto several smaller spools. This thing is an aid to use the winding tool for the bobbins on…
Ložiska 608 RS, závitová tyč M8x120 mm Bearings 608 RS, threaded rod M8x120 mm 4x matka M8, 2X podložka 8mm 4x M8 nut, 2x 8mm washer
i made this tool for easy winding samples or leftover filaments. i got the idea from the winding tool design from Noe (a mini masterspool) but made it from scratch. much more easier in use. it can hold spools as wide as 152mm with a hole…
NEW VERSION AVAILABLE! V2 => https://www.printables.com/model/157130-automatic-winding-machine-v21 This is an automatic winding machine for coiling up small cords, strings or wire. We needed a way to reliably coil up specific lengths of…
Filament winding tool, fits Prusament spools and others that have a hole from 54mm to 60mm, most spools require an M8x110mm screw, one M8 nut and one washer for use with a Prusa spool. The advantage of the spools from Prusament is that…
This is an adapter for the Nintendo Twin Famicom expansion port A. It is compatible with NES and SNES controllers, plus the NES Zapper lightgun with the 2P NES port. ===Printing=== Print everything facing up is a good choice. There really…
This 3D printed design features modular components that connect seamlessly to form a continuous, fluid display that encircles the entire perimeter of your room. Easily adaptable to various sizes, the design allows you to switch colors…
This is a small project to create a winding machine for my wife. It works well and is low-cost compared to market alternatives. All parts can be printed without the need for support structures. The part that holds the spool has a threaded…
The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite…
I've made an easy winding tool to organize all sorts of cables, cords and ropes. It uses 4 printed parts and a M8x40 countersunk screw. The cable is wind up by rotating the base an guided on a removable spool. The spool has some clips to…
Fits tape measure bands measuring 17mm by 1500mm (1.5m) The gear ratio of the planetary gearbox is 1 to 3.8. Only add glue to the blue surface (see photos) and the extra grip rings if you want to use them, the pins are press fit.…
Simple double-cone tool that screws together from opposite sides of a filament spool to hold it for rewinding. Should fit most 1kg spools with 48-58 mm inner diameter and reasonable thickness, and most mini spools all the way down to 42…
This one is for my other hobby - electronics. Helps with winding coils or whatever you want on the bobbin. The electronic box and the electronics therein are completely optional but help with the counting. The bobbins and adapters for the…
I've always thought the Gravity Spoolholder by @MichalFanta was a great idea, but I was content with my regular spool holder. Then I saw @Steven_36896 's design and I thought it would be great to put that on the frame of my MK3S+ to save…
This is a replacement winding key for the fantastic Small 8 Day Clock clock model by Steve Peterson. The clock design can be downloaded from here: https://www.myminifactory.com/object/3d-print-small-8-day-clock-337387
These are simple ÖBB Geschwindigkeitstafeln and Ankündigunstafel for H0 model railways. You have speed from 10 km/h to 160 km/h available (Number 10 representing 100km/h) You can print out the svg using a normal colour printer (using…
The author recommended buying a Lego wheel for this purpose. Link was useless, so designed and printed these. Modified the basic design, added a hollow cylinder, combined using NetFabb 2023, and uploaded the STL file to PrusaSlicer.…
Main Features It an auto-rewinder, negating the need for a buffer It's compact, designed specifically for use inside the Prusa Original Enclosure It's strong enough to handle full spool rolls It requires minimal extra hardware It only…
Overview I really liked the rewinding mechanism on the fs2026 dry box system , but didn't want to use so much filament to print out a new lid. I also already had a desiccant and hydrometer holder in the bottom of my cereal box containers,…
Don't you hate when your filament is pulled in weird directions when printing? Hate the sound of filament grinding against the frame? Well now you can UnFUC it with this new filament guidance system, specially engineered to be more…
This adapter will allow you to wind your 5" Schacht shuttle bobbins on any modern cordless drill. Print it on its side with a flat side down, and no supports are required. Low to medium infill. It's designed so that it'll have maximum…
Suitable for use with spools with a minium center hole diameter of 20 mm and a maximum spool width of 50 mm. The diameter of the part that attaches to the drill is 8 mm. Print from the material of your choice. I printed PLA myself, using…
*Currently only for 3mm diameter cable. Printed on Prusa MK4 0,4 mm nozzle 0,2 mm Quality Supports on bed enabled “Basic” - Two clips connected together “With End Holder” - Adds a small clip for easy access to the other end of your cable…
I needed a way to run filament from the spool holder directly into PTFE with use of a fitting so I added a raised mount to the front bar.
A case for earbud type headphones with a cable winding system. Simply insert your earbuds, close the lid and wind the cable in using the free spinning wheel mounted within the lid. Finally, push the jack into the clip, and throw it in…
Simple parametric design to hold wire to wind a toroid easily. The end cutouts are inset the same as the width, so the default version is 30mm long and 5mm wide (for a 6mm toroid hole) so wire held for one complete wrap is 2 (L-(W 2)) =…
Slim holder winding jig for ropes, cords, paracord
Adapter for rewinding aspool to bambulab spool no support needed sorry for my bad eng
I wanted to avoid clamping my Speedy Stitcher spool directly onto my drill when refilling due to the risk of damaging the plastic spool. Here is a prototype adapter to help hold it to your drill.
An alternate winding key to replace the crank that comes with the original model (see link below). https://www.myminifactory.com/object/3d-print-32-day-clock-easy-build-156759 Print Settings Printer Brand: Creality Printer: CR-10S Rafts:…
Use two or three clips between the spool holders to securely connect them together. These clips click into place in the hexagonal pattern of the spool holder side panels. I highly recommend the Silent Auto-Rewinding Spoolholder , although…
Rewinding Spool Holder When I first saw Filamentalist (https://github.com/Carrot-collective/ERCF_v2/tree/master/Recommended_Options/Filamentalist_Rewinder/Filamentalist_Classic_Rewinder) working, it was magical. There was one big flaw in…
Printed in PLA, when using the perfect size, it's stable. 6 sizes: 10, 12, 14, 16, 18 and 20mm.
Hex wheel for Silent Auto-Rewinding Gravity Spoolholder :)
A 5m cable variant of the cable spool.
You need some extra (about 10cm) PTFE tube an a small screw to clamp the tube in the guide. I used 4mm outer diameter tube to add al litte braking, so that the printhead cannot push the filament backwards. This prevents the filament from…
I needed to wind hundreds of meters of small-gauge wire onto many separate common 55 mm × 20 mm spools, so I designed this tool to allow me to use my electric screwdriver (or a drill) with a standard, albeit long, 0.25 in (6.35 mm) hex…
Printable feet for making Roubo style winding sticks, traditional hand tools to gauge flatness and straightness of boards. Since these are an old french design, I added a fleur-de-lis for extra flair. The STL has a hole to accept an…
Replacement winding knob for Dive Rite dive reels (will probably fit models from other manufacturers as well). Comes with a 0.5 mm and a 1.0 mm washer to go between the knob and the reel, to allow you to install it for a fit without too…
As I was tired of the mess I had with some long power cables for yard work I decided it was time to fix the problem. Commercial parts I found either to expensive or to simple to be useful. You will need 2 of the shown part plus some 16mm…
This pin will allow you to use Silent Auto-Rewinding Gravity Spoolholder with 2kg spools and 1kg spools. You can find a base for the 2kg Spoolholder here https://www.printables.com/model/314515-gravity-spoolholder-2kg-version/files
"Well known" self-rewinding spool holders have longer axle than those used by MMU2/S ones (also employed in Lack Enclosure v2 5-spool stand). So we may shorten spool hub (and gave problems with some wider spools), use original stands from…
Reel Winding Tool A hand tool to make it easier to wind carrier tape (with SMD components) on a reel. A reel for SMD components has a hole in the middle, and the hole has three slots. The winding tool has three “fingers” that fit into…
Spool holder which runs the the spool on a roll with two 608zz bearings. This ensures that the spool can be unwinded smoothly. The spool holder can take filament spools with a depth of up to ~90mm (should be enough for all filament rolls…
Ein kleiner Knopf zum Aufwickeln des Films in der Filmpatrone oder in Patronen zum selbst laden. Speziell bei der Anwendung im Wechselsack / Dunkelsack ist - für mich - der Drehknopf handlicher als die Kurbel. Er paßt auf normale…
If a hole (flat/breedingchamber) is occupied by an insect on a rotor please replace it and put it under a roof to protect it from rain! You can recycle broken air-spoon-cups, using them stationarely. If it is a non infill-empty…
Replacement winding lever for Bronica ETR Cameras. Uses a M2 Socket head and nut.
