Counting matching models…
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
designed to fit in a prusa bed, could modify it to also fit bambu P or X series for now i just printed a 3x3 test piece and it's perfect, i'll print it full soon.
Da ich nix vergleichbares gefunden habe, habe ich selber einen Rahmen erstellt. Der Rahmen ist schlicht und zeitlos. Bilder können einfach eingelegt werden. Der Clip kann mit zB Tesa Powerstrips an der Wand befestigt und der Rahmen drauf…
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…
In order to put my tools into good order I needed the 9x13 grid which I created from a SCAD file. Don't remember who it was, but thanks! In TinkerCad I added some borders to fit the grid into my tool box drawer. I had to fill 410x560mm,…
This was a proof of concept to design a completely self printed picture frame for hanging on nails or screws on the wall. It has a score on each side to auto align to the nail or screw. Every part needs to be printed 1x exept for the…
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
Air grille / Rejilla aire 130x130 mm
The Flow X13 has Windows Ink support and some models come with a stylus, however there is no good way of attaching a stylus and so I embarked on a journey to design one that both is functional and does not detract from the design of the…
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Immer wieder mal druckt man Lithohane Bilder und weiß nicht genau wie man diese präsentieren soll. Aus diesen Grund habe ich mir für die große die ich am meisten drucke einmal einen Rahmen erstellt. Maße vom Bild sollten sein 200x133mm.…
This is a perfect Box for your Prusa Spare Parts. Size of the Box Inner-Dimension: 165mm x 130mm x 70/170mm (2 versions available) You need folowing Screws to complete it: M3 x 30 = 4 pcs (for the Hinges) M3 x 35 = 2 pcs (for the Handle)
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
UPDATE 17/02/2023 Added a sanding aid to sand the inner edges of the outer surface of the lampshade after the filling primer __________________________________________________________________________________________ UPDATE 18/02/2023…
!!! I FOUND NO WAY TO PRINT IT CLEAN AS MOLD! SO I DECIDED TO CREATE ONE WHICH CAN BE USED WITH A INNER SILICON MOLD. !!! You will find the new version here:…
A rugged stackable gridfinity box. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at 0.24 leyer height. You can…
just print and cut simple as that! Dart Tips: please print in TPU anything else and you risk serious injury or damage to anyone or anything the tips hit. (meant to only print and glue onto the cut ends for practice or simple shooting to…
Printed vertically with raft and supports (removed easily from inside the HDMI and USB-C ports) with 0.2mm nozzle on a Bambu Lab X1C.
The Fiskars X-series ultra lite axes are great for hiking and their smallest X13 model would make a perfect emergency axe if the empty handle could be used for storage, this cap does just that! It is made in two versions, one hollow with…
Cosmetics basket 90x190x130/ 130x200x100 ŠxDxV (DxLxH) No support
Works for Fujitsu Primergy TX1320 M3. Tool-less installation of 2.5" drives. My print settings: 0.6 Nozzle 0.25 mm Layerheight Fill pattern: Rectilinear Fill density: 50% Brim type: Outer brim only Brim width: 2 mm The Model:…
Remix to fit the Delonghi EX130
A rugged stackable gridfinity box. This one has a smooth lid. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at…
3 Teiliger Zapfhahngriff aus PLA, gedruckt auf dem Ender 3 V2, Einzelteile mit Sekundenkleber zusammengeklebt, Mutter M10 Inlay mit Sekundenkleber eingeklebt, Passt auf Zapfanlage mit M10 Aufnahme
Stylus holder for the Asus ROG Flow X13 with original stylus (Ø 9.5mm) It clamps down on the edge of the screen and grips on to the lines on the back of the screen. All ports, vents and power button stay accessible (depending on…
Story About two years ago, I got really excited about those nixie tubes and clocks (thanks to Travelers series, HBO's Chernobyl and others). I was thinking about buying one off of Etsy, but then decided to build my own one. Unfortunately…
A simple laptop Stand saving deskspace.
Gridfinity bin for Canon m50 It has a small shallow side compartment, happens to hold 5 batteries 3x2x13 for the bin size (non-stacking). The original I printed did not fit very well so I sanded some sides then adjusted the model I…
Simple mask to use for prints. Better with higher infill to make it a bit heavy. Print five "doors" to use it as test strip maker, glue handle on top. How I Designed This…
Bonsai pot 32 hexagonal curved semi-cascade 135x135x80mm, support is necessary.
This stand is made for Lenovo ThinkPAd X13 withe hexagon patterns to save filament, there are small holes for notebook feets, to extend crossbars should fit for bigger thinkpads like row T. No screws or glue needed. Holes for corsbars are…
A photo frame inspired from https://www.thingiverse.com/thing:344307 It can accomodate a landscape photo sized 195x135 mm This design need supports (10% or slightly less), i printed it standing and only few supports were added on the top…
This is a sandpaper rack made from MadebyA2 model. It needed tons of screws while this one mostly uses printed dowels (studs or pins) as fasteners. These dowels are compatible with the original design, saving more than 28 screws per…
After fooling around with 5" and a whoop, I decided to build a 3". But what fun would it be to design my own frame? Well, it worked out awesome. The frame is a TrueX, 130mm motor to motor. Overall weight (including props, battery strap,…
Storage box with honeycomb pattern. Dimensions - 170x130x100 mm (possible to change in a slicer) Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters - 2x, PLA. Without supports and multicolor.
Case for a LoRaWAN gateway based on Raspberry Pi 2B and Waveshare SX130X (that is SX1302 and SX1303 at time of writing) HAT. Print as is, no support necessary. There are 4 different variants of the top: with a cutout for the Raspberry Pi…
Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…
Two versions available: One picture 13x9cm Four pictures 5x5cm Prints without support. Friction fit, but can be glued for additional strength.
Simple frame for picture 9x13
This is a simple XLR Cable Clip specially designed for the Microphone Arm from InnoGear . This is the XLR Cable I am using. But I think it should fit for most of the XLR cables. The extrusions of the arm are about 13x13mm and the XLR…
Insert and fixate (using superglue) a small stainless-steel/aluminium rod for the hinge-mechanism (only on the outer! hinge-parts). Be careful using the hinge – push the caddy completely in, before locking it. I tried to replicate the…
Own a piece of automotive racing history with this 3D printable STL model of the Jaguar X13. This classic racing prototype model is perfect for motorsport enthusiasts and collectors of legendary automotive designs, showcasing a unique and…
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
Easy to print Picturesize 9x13cm wall mounting or stand Prusa MINI/+ version coming soon
Project Description This is a universal rectangular ventilation grille, recreated and optimized for 3D printing. It is ideal for replacing damaged or unavailable vents in homes, exteriors, or on campers and boats. The design features a…
For RAKO 400x300x132 mm I've designed this divider for a rako box to fit all of my camera assistant junk. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: .25 Infill: 5 Filament: SwissFil…
I used the OpenSCAD files by @Monniasza_1787141 ( https://github.com/ostat/gridfinity_extended_openscad ) to generate the chest with drawers sized 3x4. The height of the large drawer is 95.52 mm, and that of the small drawer is 18.52 mm.…
The boxes were printed in PLA with normal settings (.4 nozzle, .2 mm layer). The plain box was printed in transparent PLA with Gyroid infill. The pillars box may need some support or not, depending on your printer. Decide at own risk ;)…
Bonsai pot 34 octagonal cascade 130x130x134mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Option 1: fujitsu_primergy_cage_fan.stl fujitsu_primergy_cage.stl Cage can carry 2x 3.5" HDD drives and 2x 2.5" HDD/SSD with caddy Required parts: 8x heat insert nuts (5x3x5mm) 8x M3x8 screw 70mm fan Option 2:…
Simple mount for the large Xicoy pump, the pump is held in place with one zip tie. I printed the mount in ASA, any material will work, no supports required. standart 2 outer walls and 15% infill on request I will hand out the step file
First of all @SpongyBob_8783 is a genius! I just needed a shallow rack for a lesser depth in front of the cooker hood exhaust. The 134x134 measurement is the area of the track. This model has no endstop, and i also opted out of the…
remix of a remix, of the original by alley cat. I extended the back by 5mm to make room for 2 13350 li-po batteries. These batteries are commonly found in disposable vapes.
Unterteilungen für die mittelgroßen Laden der MARS Svratka Kleinteilmagazine mit 136 x 136 mm. Die Unterteiler sind leicht konisch. Mit dem Radius nach oben auf die Druckplatte stellen. Gedruckt mit PLA, 0,2mm Schichthöhe und 3 – 4 mm…
This is a wheel I designed as a replacement for my lawnmower, where the original has too much friction and a bad way of fixing it, so it kept getting loose. Might be useful for other projects too. It needs two 608 bearings and 8mm bolt of…
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
What it is I found this model and thought it would make a good Tiny Whoop box, so I made it 32 mm shorter to better fit the inserts I designed. Credit The original model is by @PaulMostioru_1755420:…
The model provided by @Poty_1688301 already worked great for mounting 3.5" HDDs in my Fujitsu RX1330 M5, yet I wanted to be able to switch between 3.5" and 2.5" drives without printing separate caddies. Thus my remix adds screw holes for…
frame for130 x 130 mm Hueforge picture, can also be enlarged or reduced using slicing software to fit other images if desire. For a better finish, I recommend printing it rotated and with supports
The spool holder, which needs to be assembled and connected with screws, works great and unwinds the filament with minimal resistance. It is necessary to use a bearing with an internal primer of 5mm and an external diameter of 10mm Edit:…
Very specific replacement part, I have the "GE Café™ Series 28.6 Cu. Ft. French-Door Refrigerator" Model: CFE29TSDSS Over time the door engaging plastic piece at the top of the refrigerator was getting worn down and would not engage the…
Floor Drain, 130x130 mm, Pipe connection diameter 100 mm Category: Bathroom
These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys. I made them to fit a more scale body to my car, with narrower wheel arches. I printed the wheel in PLA and I am testing variants of the tire with TPU and…
Hello, I have for you a Booth, a cell for an RC car, a cart 1:10, 1:12 (130x130x130mm ). It is detachable and you can choose which parts to put where, or which ones to print. Suitable for a cart for an RC car. Or as a booth 1:12, 1:10. I…
Este cubiertero impreso en su totalidad permite almacenar los cubiertos cuando son mas 1 docena. Esta pensado para un cajon de 530 mm x 365 mm x 130mm. Se imprime por partes. Y uno se debe imprimir 2 veces para unir ambos y formar un…
A simple frame for hueforge, it has a rear hook for hanging on the wall.
Camera cover for Lenovo thinkpad x13 yoga Print Settings Supports: No Infill: 100% How I Designed This Category: Computer
I work at a bike shop, and they were aggressively cleaning up the service area, resulting in a bunch of stuff getting thrown out, including this awesome 55t Specialized S-Works aero time trial chainring. It looked so damn cool, I couldn't…
Handy go game with a 9x9 and 13x13 surface to be played with drawing pins, and drawers to hold the pins. If you want more flexibility, there are the OpenSCAD files on GitHub: https://github.com/benjaminwand/go-game-for-3d-print There is…
This is a leg designed for the PRO Gaming Keyboard x13 from Cepler The leg folds in to lay the keyboard flat and extends out to support the keyboard. The leg doesn't always stay in, but it will only be able to do this when you lift the…
About I'm calling this the RAKshare. A bracket for the RAK Unify 180x130x60mm enclosure to mount: RAK 1W booster 19007 / 3401 / 13302 board. Waveshare Solar Power Manager (D). Adafruit INA3221 STEMMA QT board for power monitoring.…
This is a replacement rubber riser cap for the piano key hammer on a Casio Privia PX130. Using this part at the end of the hammer will fix a sunken piano key. No glue needed. I printed mine in PETG at 0.1mm layer height, and it works good…
Handy go game with a 9x9 and 13x13 surface to be played with drawing pins, and a box to hold the pins. There are various versions as one piece with ‘carved’ pattern as two pieces with ‘carved’ pattern, to be glued together as two flat…
Handy go game with a 9x9 and 13x13 surface to be played with drawing pins, and drawers to hold the pins. The board will be printed in two parts and glued together. There are two options regarding the cross-pattern printing with ‘carved’…
This is a simple remix so I could print this cool dice tower on my prusa mendel. Thanks to TastyLlama for publishing the original Support will be required to print some parts. Category: Toy & Game Accessories
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Hi, mein erstes eigenes Objekt ist ein neuer Deckel für den Bodenablauf meiner Dusche. der alte war fies und schmuddelig geworden. Die Oberfläche habe ich extra etwas dicker gewählt, da ich bei den zwei Prototypen vorher, beim drauf…
This is a three-part print that lets you mount an 80mm fan below, and a 120mm fan above, your new Topton N100 "fanless" pc that you just bought only to discover that it overheats and/or burns your fingers. If you haven't bought one of…
The MaggieFrames are extremely useful when paired together with the Hooping Station. But they have the downside of getting detected as the “wrong” frame size which can lead to crashes when not careful. We didn't want to risk crashing the…
I've been getting little fastener assortments from Aliexpress lately and they were starting to make a mess. This stackable, modular, storage unit have me a place to put lots of those little 60 x 130mm containers. Start with the base plate…
Hummingbird Bit, a fantastic intro/hobby robotics for the BBC Micro:bit, comes with a basic holder. This stl adds a lego technic compatible 9x13 frame to serve as a base chassis for your robots built using the technic build platform.…
Coperchio di derivazione 11x13cm con prolunghe per viti molto lunghe 11x13cm branch cover with extensions for very long screws
This 3D print model is a unique and functional gift idea, designed to put a letter or a banknote. The box is made of PLA material and the front of the box is designed with a lattice-like structure, allowing a glimpse of the inside…
Dayton Audio DAEX13CT-4 Coin Type 13mm Exciter 3W 4 Ohm based on the measurements: L 45.5 W 30 H 12.5
❤ Cadre Photo "Instants d'Amour" – Format 10x13cm Célébrez vos plus beaux souvenirs avec élégance grâce à ce cadre photo spécialement conçu pour la Saint-Valentin et les occasions romantiques. Son design délicat et chaleureux en fait…
I tried out a few of the prints but none of them seemed good, and since I only had M3 4mm screws, no nuts, some zip ties and a dream to get this done just today, i decided to design this the bed piece can be zip tied but if you want to…
This little enclosure fits the SX1308 Boost Converter available on AliExpress, letting you run it inline, and giving it some protection. It might be a tight fit, depending on the individual regulator. If you have troubles, let me know,…
Lego compatible FRAME 3X13 (4526)
Re-upload from my 2021 model on Thingiverse . I got bored over the last year, so I decided to make a puzzle using a topographical map of my favorite travel location Iceland . This puzzle consists of 247 pieces that, when printed at…
Hidden underside screw access - Prints without support
only need support where bag attaches. the DTX 1300 holder is discontinued part # O-098206401 so I printed this. works great for me. Print Settings Rafts: No Supports: Yes Category: 3D Printer Parts
Choose desired vent front. Change it to different one on demand. Frame installation (wall hole) size is 130mm x 200mm There are two frames in STL section. "frame.stl" should be used for installation with screws. "frame_ideal_fit.stl" is a…
