1,087 models
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
Trapezoidal lead screw Nut tr8x8-4 for the Trapezoidal lead screw tr8x8 Print instructions Print it slow, optimal height of layers is 0,15. Thinner layers mean smoother movement.
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
15.01.2022 update This is my version of iFlag display working with all popular simulation games like iRacing, AC, ACC, Dirt Rally, witch SimHub open source software! For this project you need additional Arduino Nano unweld board, piece of…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
You need Arduino Nano Example link 8x8 Matrix Example link 6x m3 Thread Inserts, outer diameter 4,2 mm. (if you want to use 5mm threads, there as a alternative Glas Part 6x m3x12 Lens Head Screws White Filament for the “Glas” Dark…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Collection of screws (ISO 4017 / DIN 933) including : M8x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
Please be aware the model uses light weight modeling so has at points thin walls of 0.8mm, some users have indicated they had structural issues if they don't have a well calibrated printer. Inspired by AaronOaks model, unfortunately my…
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
LEGO TESLA CYBERTRUCK 8x8
This project is a three part LED flag light case with different mounting options. V2 supports a 5V DC power supply (5VPS files) and up to a 5mm thick acrylic plate (V1 up to 3mm). Pictures were taken from the left side of the V1 dual…
🧱Lego Duplo Brick 2x8 #4199🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…
Print to see how well each corner is calibrated for the z offset. 0,2 mm height
Upgraded my home router, and wanted to wall mount it just like before. This model uses the same mounting holes as this Xiaomi R3 mount . Print it with support, mount it, slide the router in, and you're done. V2 update: the bottom hook…
Features A variety of button caps for square 7x7 / 8x8 / 8.5x8.5mm PCB push button switches Works with any switch with a 2x3mm square mount, either friction-fit or glued in place Choose from various shapes & sizes, or make your own with…
This is an accurate recreation of the Prusa MK3 POM TR8x8 and probably other printers (other ones I tried from thingiverse didn't match the lead pitch). I print them in PLA and use them in a MK2 clone I have lying around, they work…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
I decided to design a beautifull fan grid for my minimalist 3D printed fume extractor designed by Rdmmkr. https://www.instructables.com/member/rdmmkr/
I was born all the way back in 1977 and when I was a teenager Adidas released the Torsion ZX8000 Aqua and I still remember the day when my mom got me these awesome shoes. I don't know why but since my 30's I started to think about the…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
The nut i used as a replacement for regular brass ones. Works great printed with PET-G, PLA or Resin (the one on photo).
Collection of screws (ISO 4762 / DIN 912) including : M8x 8, 12, 16, 20, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
I really like CSD_Salzburg's Skadis designs but these containers just take too long to print. So I adapted a vase printing idea to be used with the IKEA Skadis containers and added a little twist. I also added a little feature trick to…
🧱Lego Duplo Plate 2x8 #44524🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Only a small remix with space for 8 screwdrivers
Modeled this in Fusion360 to allow me to get these giant models off my desk. Mounts to wall using simple drywall anchors that you can get at Ace Hardware / Home Depot.
Prints fast and with not much material. Holds enough silica to maintain a single spool
Description Wall mount for Honor Pad X8a 11" tablet. Minimalist design that does not disturb and follows the line of the tablet. The power cable is hidden. The small gap between the wall and the tablet allows for better cooling and…
An accurate as possible ZX80 housing. Original made by 'alvaroalea' ( https://www.thingiverse.com/thing:1880449 ). Modified to be printable on a standard 3D printer. Updated January 2022: All walls now have a minimum thickness of 1.5 mm.…
88x88 mm Shelf: Needed a larger shelf to hold a few photography light modifiers. Made this thicker, larger, and stronger then the original shelves.
Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…
This is a remix of 2 files from Windy and Hidayat . Trapezoidal lead screw Nut tr8x8-4 fit perfectly to the lead screw the Trapezoidal nut Tr8x8 "fit perfect!" had the right spacing. I've just mashed them both together. Holes for the m3…
Print-in-place fordable chessboard / pixel art board box with push in tiles. Board Size: 250.2 x 250 x 33.2 mm 64 Tile slots Tile Size: 29.5 x 29.5 x 5.75 mm Print: 0.2mm Layer Height Attach magnets on the inside to help keep the box closed
Slim casing for Nextion 7 inch NX8048T070. Designed for wall hanging.
This should fit most Fords with the stock 6x8 speaker and adapt it to the more common 6.5in speaker. Fasteners: This uses M4 or M3 threaded inserts to hold the speaker in place. There is a 2mm 60 degree chamfer on the opening for the…
ЧЕХОЛ ДЛЯ МОБИЛЬНОГО ТЕЛЕФОНА "HONOR X8B" Добавлен файл в формате 3mf. Для самостоятельных изменений для себя. При печати разрежьте на 2 части, как показано на картинке
Print two brackets, mount them ~14cm apart on the wall. Optionally, if the power cord is not long enough to reach without lifting the power brick, there's a power brick holster which can eliminate the tension on the power cord. See the…
Included is a two piece case for an 8x8 WS2812B LED matrix. I use this wired up into an Arduino Uno connected via USB to my PC and controlled with SimHub. Materials Here is the exact 8x8 LED matrix I bought from amazon: 8x8 LED WS2812B…
Introducing the NokBox , a compact dice-storage/rolling-tray solution for my TTRPG players. I wanted to gift my players custom dice boxes with different lid graphics for each person. First I needed a box design with a lid that can serve…
Copy of my retro Display Stands listing as for some weird reason that one isn't showing up. Covers: ZX81 ZX Spectrum 16/48k Rubber Key ZX Spectrum + 48/128k toastrack ZX Spectrum +2/+2AB ZX Spectrum +3 with and without Gotek (extra 5mm on…
I'm making a project that uses these 8x8 RGB LED matricies and I needed a reference model. I couldn't find one so I knocked this one up in OpenScad. Seeing as I couldn't find one here, I figured I'd upload it so anyone can use it as a…
Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…
Here is a case for a 32x8 RGB WS2812B-like leds strip, and a ESP8266/ESP32 controller on the back like a D1 mini, ESP-01… to control it with WLed or PixelIt firmware as an example. Fusion 360 and STEP files are included to allow remix…
Stand for Lego 42156 Technic Peugeot 9X8 24H Le Mans Hybrid Hypercar (35°) There is a second version where you can print “9x8” and “Peugeot” logo separately in order to change color at 2mm
Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs Created using https://github.com/kennetek/gridfinity-rebuilt-openscad Gridfinity size 1x6x8 Printed with standard settings.
Replacement for the window motor gear. Works as intended, printed with PETG-CF.
This adapter converts the S100x8 thread to a smaller G2 (2") piping thread. Handy for connecting bigger hoses. Made in Fusion 360. You should place a rubber ring / seal on the end of the S100x8 thread. Print in the provided orientation,…
Accessory kit for the Speedybee TX800 VTX. Print in TPU. Bottom print allows for a comfy softmount preventing damages on repetitive crashes, Top print fits any receiver with one or two ziptie to secure it in place. Hardware required :…
This is simple desktop card notes box up to 80x80x50mm inside. Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders. You can easy print it without…
Made for my QIDI X-Plus, should be compatible with X-Max and can be useful also for other printers. There are several STL with different clearance. You can use the STEP file to fit your personal needs. I printed the 0.6mm clearance…
Es ist eine einfache, kleine Kiste.
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
This is an adaptation of original for better cable routing and more modular approach for front side. Also added support for M8 screws since we all have a lot of them around :). Original model is a great design and well made, creator have…
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
Not my files. Reuploaded for my collection. Thingiverse thing:5333738 by Jaxes88
The ZX81 was my first computer, many hours were spent playing games like 3d Monster Maze and others, and typing in games from magazines then losing it all due to ram pack wobble, but it still holds a place in my heart that I just can't…
Profile "U" for LED Light Bar Prusa i3 MK2 / MK3 lighting. Fitted perfectly, it enters with a slight resistance. To avoid the bending of the profile from the LED heat, I recommend printing the element with 70% filling. The LED strip must…
This mainboard cover is made to update the motherboard fan. You'll be able to mount a 80x80x24 Fan with a buck converter in this cover. Material required: 1x Buck converter --> https://www.aliexpress.com/item/32912622343.html 1x 80x80 Fan…
Collection of screws (ISO 10642 / DIN 7991) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
This is my wall mount design for the Asus RT-AX86U/RT-AX86U Pro router, with cable management and SSD pocket. There are two versions - one is the compact with narrow cable management for tighter spaces and the other one is the extended…
Scadis pegboard holder for 8 screwdrivers from Wera Kraftform.
PixelClock 32x8 NeoPixel LED matrix to be placed on a desk or on your wall. For BIG printers as 1 piece front and small printers in 2 front parts too! =) This project can be assembled without soldering. More on this below… Video: Music…
Easy to print. As an addon to my Euro Pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
Update: A configurable version of this coupling is now part of https://www.thingiverse.com/thing:4632898 Drop in replacement for Hornby's wide style X8031 coupling. It's slightly wider at the base due to the hook's hinge mechanism, but…
This design is a remix from Lee Smith's ZX Mechtrum case. Uploaded my remix here with his permission. https://leesmithsworkshop.co.uk/products/zx-mechtrum-3d-files-digital-download It is a case for the ZX81Plus38 with cherry-type switches…
This remixes a 32oz 80x80mm IPA holder for a pegboard (which is a remix of a smaller holder) and adds IKEA Skadis mounting pegs from the Fluke 87 V multi-meter holder. The mounting pegs are a bit tight. I clipped the corners to help them…
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
Its a fix for my K1, after it had extrusion issues. This simple fix solved the issues with extruder for me, hopefully helps you aswell. The extruder gears (the ones that pushes the filament) in K1 is attached to the chrome plated base…
Plate 2 x 8 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated with…
Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
I resized and adjusted the great model from @dewgenenny. It fits the 8x Relay board now, what I changed apart from the size was: replaced the guides to fit M3 screws and nuts (the nuts I fixed with superglue in place) Changed the holes to…
Beadlock wheel for TATRA 815VT 8x8 with tires from aliexpress. Aliexpress link: https://vi.aliexpress.com/item/1005005925269265.html? MLMODEL TATRA link: https://mlmodel.cz/produkt/tatra815-vt-8x8/
Much more easy to remember different screws. Funny to use, good on photo. Avoid black. No support, 13% fill.
Box na uložení elektroniky pro Tatru VT 8x8 od MLmodel. Box upravený originál od MLmodel, víko vlastní
Key Organizer This is not a new idea but I needed a replacement “Key Tag Rack” as one of mine broke. I have modelled a x4, a x6 and a x8 key version, however I am unable to print the x8 version as it will not fit on my Ender 3 v2.…
Sanding Band holders of 6 Large, 2 Medium, 6 Small sizes. I shortened it by 1 unit to allow more flexibility of vertical or horizontal orientation in the dremel box, and because medium sanding bands are rarely included in kits. Re-added…
Since I switched to a flexible electricity tariff ( Tibber in my case) at home, I was looking for a way to indicate the current price level as well as the trend for the next few hours in an easy way. After some search, I found a project…
Low profile wall mount for the Asus RT-AX88U. Pegs slide and lock into the keyholes with ease. Should work for anything with mounting holes that are 8 5/8in or 218mm apart (From center to center) Thanks feddas , didn't have to measure a…
This is a complete printable case design for the ZX81+38 replica board and the ZX81 Tactile Keyboard . For those who are interested in just the keybaord, the design files for an "external keyboard" are included as well. See my blog post…
My video about this project: The cars that I disassembled for this project were both Himoto HI4185/HI4185BL. Only parts that I used from them are front and rear differentials (The whole shock tower assembly with wheels, gearbox and…
Collection of set screws (ISO 4028 / DIN 916) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
Camera cage for the Lumix GX80 / GX85 camera. I designed the cage because the cages for GX80, which is still a good camera, are no longer available on the market. The cage contains a number of 1/4" and 3/8" UNC camera threads, known as…
Added magnet holes. Magnet holes have square bridges for better bridging and no droopy rings. Printed at low resolution with: PLA+ 0.6mm Nozzle .28 Layer Height High speed No Ironing
Support for Fanatec CSL DD used for 40x80 aluminum profiles sim rig. No supports are required. M6 bolts for securing the CSL DD and M8 bolts for the 40x80 profiles.
Dieses Teil ist zum reinigen von Trapezgewindespindeln mit 8 mm Durchmesser. Print Settings Rafts: No Supports: No **Resolution:** 0,2 Infill: 25% **Filament:** 3DJake / extrudr PLA Tough / NX2…
