78 models
Zubehör für FoxAlien Masuter Pro CNC. Vakuum Halterung, Knopfhalterung, Gebläsehalterung (Potentiometer) für 20 mm Nutprofil welches auf der Front genutzt wird. Cnc Zubehör. Verwendet von mir: Knopf: GeKLok 5 Stück KCD11 10 mm x 15 mm…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Based on my famous ultra articulated snake, i proudly present the ultra articulated axalotl! There are two sizes of the axalotl, an adult and a baby. The cover image is vertex painted and rendered, because i have no multicolor printer ;-(…
*I designed my own version of the Hexagonal Nanoleafs. * * For people who look for an easier project without the soldering, please check out my No Soldering Version. * https://thingiverse.com/thing:5207176 Why is this version better than…
In this project, I used led strip and lithophane photo to make decoration panels. Each module is a hexagon panel and can be used to make different shapes (nanoleaf alternative). For each light panel, you will need 0.5m of LED strip, the…
Kindle Fire Tablet 10 Inch (kids), Headrest, Car, Vehicle Mount, Designed for Vauxall/Opel, Zafira B, Astra G It may fit other vehicles with similar spacing of headrest posts. Printed in ABS to allow for a little shrinkage. I wouldn't…
there are 2 models, one with a 2mm hole to find a rope and the other without a hole to punch, which you can do according to your needs. print with sla printers for a better surface, and with FDM printers it is best to use the smallest…
I recommend sizing this up 1% to 2% for best results
* I redesigned my own version of the Hexagonal Nanoleafs that doesnt need any soldering. * If you want to use individually addressable LEDs like WS2812s or have more effects, check out https://thingiverse.com/thing:5154193 Why is this…
I thought the original was a great idea, but when I printed it I realized there was a couple of problems for my setup. It mounted very low on the front rail, requiring it to hang over the edge of the table. I will be building a box to…
This is an original artwork that takes inspiration from nanoleaf projects. My twins loved Hexagonal-Alexa enabled - light so I elaborated this model in thinkercad and prepared with several trials&errors About the model itself: @ it has 2…
Ues this with the FoxAlien low profile vise to get things squared up. Vise: https://www.amazon.com/Profile-Workholding-Machine-Milling-Worktable/dp/B08C26KVD3
Description Here is my version inspired by NanoLeaf. There are 4 different thicknesses of hexagons to add dimension (25mm/30/35/40). And a textured lid (remember to sand the seam on the hexagon and on the lid before assembling them…
I did some things in blender to smooth it out, idk if the original is in my uploads, all i know is the split files print spectacularly at 200%. smaller there are some print issues with the weird eyeballs and mouth holes. i have no idea…
1:35 scale model of an oxalaia. At this scale, it measures 14.4 inches in length. The model features detailed scale texturing. There are two versions of the file, standing and posed. The .STL files are fairly big, they may take a while to…
This is a powerful and portable magnetic stir plate perfect for laboratory use. Common conversion factors are included on the front plate for convenience. A model with a blank front plate is included as well - customize your stir plate!…
There are only a few tools you use regularly on the FoxAlien Masuter Pro CNC router, so I made a little block to hold them. You will need 1 M5 x 6mm cap screw and a way to tap the center hole in the front channel. No supports needed. I…
I designed a Logo as cover for the exeptional good hexaleaf from @ElHeisa : I used this Hexaleaf Project, there is an other one from ElHeisa without soldering . It should fit for both versions. You have to print a “round” shape of 7…
This took me the best part of the last 3 days to create this model from the original attached. What do you think? Feed back is always appreciated, Cheers Jace ; )
There are a lot of so-called “Heaxleafs” on the internet, here is my version. They are basically a copy of the Nanoleaf. I used the top part only as a template and cut my own opaque acrylic, this gives a really nice look. Parts: 2x…
This is a Remix of the HexaLeS Lamp by ErikState ( https://www.thingiverse.com/thing:5400473 ). The main hardware is a Wemos D1 mini running the WLED software and a led strip of ws2812b leds. I made some modifications to add a level…
This Dust Guard protects the X&Y Axis rollers while machining. It has a 2.5mm slot on both sides to fit a piece of felt or brushes that can be cut to length for proper rail contact. The guards can be printed in any material and they are a…
I hated that the extrusion under the belt was getting filled with dust and debris so I designed this little cover. it uses the original screws for the stepper to mount up. you may need to take off some of the excess belt
A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…
“Awaken, Emblem of Bonds!” - Alear Just what the Divine One needs to summon Emblem Chrom and Emblem Robin to assist in battle. Bracelet has an inner diameter of 85mm. Scale accordingly.
DIY Nanoleaf / Hexaleaf Fully 3D-Printed WLED (open source esp webinterface/app) to control the 10mm wide ws2812(b) LED Strip Mount with double sided Tape No Supports Needed
I always wanted a Nanoleaf but they´re so expensive so I thought I can print one. So here it is. I used WS2811 LED Stripes and a ESP8266 with WLED to light this Model up. These are the stuff I used: WS2811…
---INGLES--- HEXALIS Storage Loot Box Introducing the HEXALIS Storage Loot Box! A design inspired by futuristic chests, perfect for those looking for a unique storage solution with a touch of science fiction. This storage chest is ideal…
A simple plate to move the microswitch limit switch on the masuter Pro outwards. This allows the end plates to be used as bump stops and in combination with altering the x belt retainer as per images - you can gain 50-55mm in X movement.…
This is 4 models, one of which is a remix, another is inspired by an existing model and the last part is my own design. Cam lock top piece ( remixed from here ) Cam lock top with hold down rim T-nut ( inspired by ) Railbase - my design…
EDIT - 8/5/23 Modded the box to include some side vents in case you want to stand it sideways. Also added a hooded Fan Grille. I upgraded to higher torque 2.1a motors on my masuter pro and pretty quickly the stepper drivers got hot and…
Simple 3d printed mod to gain Y axis travel you will need to flip the tensioner upside down to gain travel too.. as per picture
i got a foxalien 3018 pro cnc for my first cnc router but i was never able to get it to finish a job, it would quit mid job an i was never able to find the reason so i sent it back and instead of just getting a replacement i got one that…
The HexaLock is a sleek, geometric storage solution that balances form and function. With its hexagonal profile and lift-off lid, it offers a modern alternative to traditional lock boxes. When the lid is placed on the base, two aligned…
I saw nerdforge's video ( https://www.youtube.com/watch?v=2OP-oEbzB6g&t=562s ), but I didn't have enough room to hang their hexaleaf against the wall. So I made this small version. I use an arduino nano with the fastled or neopixel…
A simple model with no supports needed. You can use a pen if its thick enough or you put tape around it. Let me know if this was helpful in anyway and what i could improve on in the future.
This shorter Masuter Pro Y axis belt tensioner extends the stock Y axis work area up to 430mm. You will need: Longer belts Print 4 of them 4 M5 hex nuts Flip both Y end stop brackets on the frame by 180 degrees Move the front cable chain…
Cleaned up the mouth parts because i wanted to make a negative to pour concrete in.
Marked as WIP because the project is shelved. I haven't tried the clip and the hook on the wall yet, but it should work okay. Category: DIY
A remix of Nerdforge's awesome Hexaleaf project. Nerdforge Video: https://www.youtube.com/watch?v=2OP-oEbzB6g I found I had issues with implementing the code onto an ESP32 easily, so I created a video to explain how I finally got it…
Plunk your 40W laser into your 69mm router holder. No need to remove brackets requiring retramming each time. I used PLA, and haven't tested it while running the laser so heat issues might be a problem. Print two obviously. I used about…
Corner Angle Clamp for the FoxAlien XE-PRO. The M6 bolts are on a 90mm hole spacing. I originally made the 20mm wide clamp and after using it, decided to make a 40mm wide one for better placement for clamping my work piece. Corner Angle…
Respiratory valve model respironics for total face mask brand
A Lost caverns of Ixalan themed lid for MTG: Battle Storage The tolerances have also been increased for an easier fit into the case and magnets. Print with filament change to get a great looking logo.
Tool Holder for the front or rear of the FoxAlien Mauser Pro CNC Machine. The holder is offset to avoid the dust shoe encounter. Additional hardware required: 2 - T-Nuts 3 - Screws
The FoxAlien Masuter laser/cnc has an acrylic “case” for the control board that is prone to breaking this is a replacement that mounts to the back of the machine. Does require removing the power switch and soldering wires to it and the…
ENGLISH Hexalis Lite – Futuristic Storage Chest Introducing Hexalis Lite, the compact version of the original Hexalis design. It maintains its futuristic aesthetics and functionality but in a reduced size, ideal for those looking for a…
Covers that clip to the stand offs on the Y and X axis of the FoxAlien XE-Pro. You can buy the brush material on amazon : https://www.amazon.co.uk/dp/B08Y56B47Z?ref=ppx_yo2ov_dt_b_fed_asin_title should just friction fit in the slots. I…
VELKORUM – Anthropomorphic Horror Miniatures Collection by Crazy3D Enter the brutal world of VELKORUM — a dark fantasy collection of highly detailed tabletop miniatures designed for painters, collectors, RPG campaigns, skirmish games, and…
Kleine Korrektur 2023-01-14: Beim mittleren Teil war außerhalb des Sechsecks noch ein Fragment vorhanden. Dies ist mir heute beim nochmaligen Slicen aufgefallen. Ich habe das STL sowie das ZIP-Archiv aktualisiert. Gude Eintracht-Fans…
Here's a little lamp that you can fully print. The transparent parts are printed with some transparent filament, using infill patterns for a bit of fun. You can also cut some transparent PVC, 3mm thick, 67mm x 130mm for each panel. Glue…
You can use this adapter to mount the FoxAlien Low Profile Vice on your Makera Z1 desktop CNC machine. The adapter replaces the L bracket at Anchor Point 1, and uses 3 M5 bolts & 2 dowel pins to mount. You will want to check the…
E-Stop mount for the Ender 3 S1. This mount is designed for a Schneider/Electromecanique XAL housings with 1 hole. E.g the XALD/XALK housing. This replaced the stock LCD mount and uses the same hardware to mount the mount. Since I'm using…
Project I made using a ESP8266 as a controller for the LEDS (WS2811). Make sure your first layer of the hexagone is perfect because you will see all the imperfections. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Alignment square for the low profile vice as found here and here. Thank you to the original designer!
--ESPAÑOL-- Foco LED Hexagonal especialmente diseñado para fotografía, exploración, reparación de coches.... ¡¡Es multipropósito!! Cuenta con 2 tiras led de 25cm de hasta 10cm, botón basculante estándar y cargador USB tipo C. Cuenta con…
Made with help of vacuum-hose-adapter-openscad by Ostat
dust collector for makita router (or vevor router) on a foxalien Masuter pro with dust pipe dust pipe with TPU95A dust collector with PETG Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Category: Parts
imported to fusion and made to be flat on the bed and not need unneccessary supports.
Michael Boxall Minnesota United Football Club
This is a drop in replacement for the x and y limit switch end stops for the FoxAlien 4040-xe. I lost one so i just made and printed out new ones. They are slightly more lower profile than the stock ones, but the switch still hits it with…
You'll find explanations in french on my website : https://labidulerie.vicou.be/suceurs-aspirateur/ I made them after walking on the original ;-) The Freecad file provided allows you to adapt the diameter and shape of the part to your own…
flange intenfded to fix/cover ½" PEXAL T-element nut
This is a hack&slash design for a slightly larger control puck that holds these boards: https://amzn.to/40ri4p3 I strongly suggest using DC power instead of USB, especially since I did not leave a hole to plug it in. This was inspired by…
This is a fixture to mount the FoxAlien Mini-Vise. I noticed only having two bolts mount the vise to the bed caused one end to be lifted up. This allows three mounting points of the vise to help with that. You will need (3ea) M6 x 8…
flange intenfded to fix/cover ½" PEXAL nut flange
Hexalith Eine minimalistische Designer-Vase mit markanter Wabenstruktur. Ideal für moderne Interiors oder als stilvolles Dekoobjekt. Scaled down to 75%
Der Stopfen ist im 3mf massiv hinterlegt um einen sehr passgenauen und STABILEN Stopfen zu haben, um eine Bienenbeute zuverlässig und dicht nach einer Oxalsäure-Behandlung per Verdampfer mit 6mm Rohr zu verschliessen. PETG empfohlen als…
A hose adapter to fit the Fox Alien Dust Collector hose (31.7mm diameter) onto the Carvera Air. I added a large fillet around the hose hole, which has made it super easy to pop in/out. The included Fusion file should make it easy to adapt…
Hello, My original Laser Engraver protection has been broken because of a software problem. I've glued the broken parts and model it. The original part is 15 € + shipping if you want to order it from fox alien support. I've just made…
i upgrade james dean design, because it had some issues of dust income. my design clip on Category: Parts
Français Adaptateur de sublimateur à acide oxalique pour ruches P-Hive en polystyrène Pourquoi traiter. Varroa destructor est un acarien parasite de la taille d'une tête d'épingle. Il s'accroche aux abeilles adultes et se reproduit dans…
I sit my cyclone separator on top of my dust collector, but it slides off sometimes when I'm using the hose to clean out my CNC. I made this tall and thick bucket holder so that even when pulling hard, the bucket won't pop out. I affixed…
The CQ Medical Dexaline Hand Board is a fantastic product for reproducible setup of hands for osteoarthritis LDXRT. (Though, as the original designer of the prototype, I am biased), however, there is one original design feature that was…
imported to fusion and made to be flat on the bed and not need unneccessary supports.
The HexaLock is a sleek, geometric storage solution that balances form and function. With its hexagonal profile and lift-off lid, it offers a modern alternative to traditional lock boxes. When the lid is placed on the base, two aligned…
