Counting matching models…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
all stock hardware. I used pps-cf filament but anything should work
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
Use the text tool in Prusaslicer to customize your signs :)
This model was found on thingiverse: https://www.thingiverse.com/thing:5507861 by DIVMSTER who remixed it (added the magnet recesses) from the original: https://www.thingiverse.com/thing:3054777 by SkornoThePro I printed it for a family…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
With this and a few keystone jacks you can embed a Linux SBC (rpi) in your project and never have to crack the box open to service it. Print panel side down, supports very required. A 0.3mm layer print comes out quite usable. The panel…
The source marked this model as adult content.
This model replaces the chrome cap of the BMW coupe E92 extender arm with a hook that grabs the seatbelt successfully much more often than the original design. Designed to be a near perfect fit with the OEM shape. I recommend printing in…
GoPro arm extender - straight - 25mm, 50mm, 100mm
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
An outlet box extender to use after renos... In 20mm and 10mm depth... Print Settings Printer: Ender 6 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Printing Canada Value PLA PLA white How I Designed This…
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
1 gang electrical box extender 6mm (1/4") and 12mm for extending box when wall is covering has changed. I printed with PLA at .20mm layer height.
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
If you need a few cm more to close the button
Simple +2 grip extension that slips on with the stock magazine retention plate. Category: Hand Tools
How to use it - Important notice Press fit, just push the pencil making sure it makes contact with both set of prongs. It may scratch the paint on the pencil a bit. The extender needs at least about 1.5 cm of pencil for the plastic prongs…
A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.
pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…
To impress the American consumer, makers of toilet paper have been putting more and thicker paper onto the rolls. Many people can only buy toilet rolls that are so large that they will not fit in the dispenser found in their homes. This…
Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…
Extender tube to add 5" of height to your Aerogarden Harvest. The wire going to the LED lamp has enough slack in it to accept this, but it's tight so you may want to extend the wire as well. I've included the Fusion360 file so you can…
Printed upright with no supports. Large sticks can be removed using an m3 screw down the centre, to push the original stick out. Or use the steak knife method by gently cutting a split and they remove nice and easy. I cleaned the inside…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
printed using 0.4mm nozel with layer hight of 0.12mm
I wanted my IKEA ALEX drawers to open a bit wider. Disassembled the sliders, brainstormed for a while and made this mod. This replaces the original ball bearing holder to make more room for sliding. It opens around 1.5 Gridfinity units…
If my stuff makes you happy, consider donating $1! Hope you all can make a buck on it yourselves. This is a replacement light switch plate cover that allows you to flip a switch further from the side. Good behind shelves and other hard to…
An extension arm to get a longer reach for the MG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the SG90 servo's
Extend the box of your Wowstick electric screwdriver to fit the 3 tips tubes and the Wowstick itself. Need 8pce 5x1.5mm magnets https://www.aliexpress.com/item/1005002669769662.html Update: New version for 5x2mm magnets added. Need: Super…
The model can be printed without supports. Maybe just rotate and print. I printed it with 0.2 mm layer height The extensions are stackable PLA or PETG
Snap on extensions for using larger wheels.
I 3D modeled the legs that came on my Two Trees TTS-55 Pro and added a 3/8-16 thread to the bottom to add extension risers of various lengths. The extensions are 10mm, 20mm, and 40mm columns with the same 3/8-16 thread. I also made a…
Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in…
I made this remix after printing the mini-talon extender FetteWorst made and realizing it needed some tweaking to work with the Venom Pro mag. The spring in the Venom Pro mag is too short to support the 5 extra dart capacity. It is…
The umbilical always rubbed on my tophat. When I Upgraded to 0.2, Pandora and AfterSherpa, this rubbing caused the sensorless homing to fail. Extrusions are pretty hard to get, where I live. These extenders raise the tophat by 30mm, so…
Parametric table mount This is a remix of 1llia's great Table mount extender model. The original model is a really great idea, but unfortunatelly it did not fit exactly to my needs, so I re-designed it from scratch. You can download and…
For all the indoor gardeners! I was tired of my very small window sills that were not wide enough to hold plants for good sunlight. I didn't want to permanently add a larger window sill with glue or screws, so I designed a clamp that…
These slide over the factory rear vents to extend them past and over the floormats to increase cooling to the back seat. I suggest printing them in PETG or ABS so withstand the heat from a car. I will be adding models with more options at…
My cat loves to drink water from the bathroom water tap, but as he grew up, I decided to help him drink in a more comfortable position... But, didn’t find any solution that fits... #FTIJPI !!! Another good idea is to use it to help kids…
Chromecast remote control case / extender
Holy Honeycomb! Your wall is organised to the max but you have one more item to add, but alas no usable hex spaces left or space enough to extend the honeycomb with another wall. This is where the Single Hex Extender might be useful to…
Use this to extend Geared BO motor, that comes in cuboid package, the shaft will fit tight, also the tyre can fit tyre on the other side
Logitech Paddle Shifter Adjustable Extenders These clip-on paddle shifter extenders offset the stock paddle shifter to better fit aftermarket wheel adaptations. These are designed to fit perfectly with my other hot swap wheel connector…
My late Mom's old Panasonic table radio needed its volume control (with integrated power switch) replaced. The replacement parts would apparently be considered vintage now, but Philmore sells an appropriate value pot with an integrated…
This model extends the injection molded part that comes with the Prusa Mk3 family of printers so that it can hold 2kg spools and remain compatible with the Prusa Enclosure. Printing Orientation I recommend printing this vertically (as…
The original tunnel extension is obscenely expensive, but what do we have 3D printers for?! :D
This is an Intel NUC 8 or later extender to give "Slim" models an SSD mounting plate. I used M2.5 heat set inserts on the top of the plate to interface with the existing NUC bottom plate, and M3 heat set inserts on the side for the plate…
This is an extender that you slide over the vent under the front seats to help redirect the air to the back seat with a 30 degree angle. I printed with NO SUPPORTS - standing straight up on the bed with a BRIM to help hold it. My Maverick…
Sturdy extender for the legs of a Lack table. I would recommend printing with 3+ perimeters, depending what you put on top of the table. The screw holes are 3mm, and I just used standard wood screws. Using higher layer heights makes a…
On my Cricut Explorer Air my 12x12 mat was always flopping down while it was going back and forth while cutting. I designed this to help keep it stay in a straight plane while printing etc. Hopefully when i have some more time on my hands…
Simple parabolic signal booster. Stick any aluminum foil inside. Print instructions Print it with a 5mm brim, left or right side down. You need two pieces.
JERRARI3D.com The GEN2 Hex Bit Extender Drawer Insert are designed to fit the GEN2 Grid Drawers to holds them securely in place, but these are also designed to fit in any standard GEN2 lack drawer as well. They can be mixed and matched…
I wanted to fit more balls in the ball bucket for my table tennis robot Pongbot Nova S Pro. It's made in two or four parts depending on the printer size. The effective height of the extender is 80mm. It is infinitely expandable. The…
This complete redesign from "Back Cover for GameSir G8 (universal and Y700)" was created by bassderek. This two-part design allows you to extend the GameSir G8 out to fit an iPad Mini 6. The case covers both the back and front and is…
This leg extender/stacker is designed to fit over the corner of the table top prior to screwing the leg in. No hardware necessary! I have uploaded three different heights (65mm, 80mm, and 100mm) and have included the Sketchup file as well…
I created this to prevent water / mud from flying up onto my back and helmet, and to add some sharpness to the esthetics of the bike. Bill of Materials: 2 - M4 x 6mm screws 2 - M4 nuts Attached to this is an assembly pdf. (not updated…
Huge thanks to Ryan of V1 Engineering, the Generous Genius, for sharing his wonderful machine designs with the world. This is a remix set related to the amazing LowRider v4 DIY CNC . For orientation on what is meant by “front” of the…
I got myself a Voron CNC TAP from Chaoticlab and i saw that you need to put the X endstop on the TAP itself, but i have PCB for my X/Y endstops so i modeld something up quick and tought to share it here as someone may have the same…
UPDATE : I've built a better version. Try it out here: 40 oz LTT Bottle Extender - Improved I love my 40oz LTT water bottle and take it everywhere but it won't fit in my car cupholders. I modeled this up to make it easier to transport.…
If you're looking for my Bambu print profile, you'll find it at MW . A thread extender and guide designed for use with large thread spools that don’t fit on the machine . When large spools sit behind the machine, the thread often gets…
An altered version of the official Handy 2 extender making it easier to print on an fdm printer. I basically thickened the interface part facing the user with 1mm. The result is that breakage is less likely. The internal ribs were also…
Hey there! Are you fed up with snapback caps that just won't fit comfortably on your head? Well, we've got the perfect solution for you! Introducing the Snap Back Cap Extender for extra-large heads. This innovative accessory is designed…
Remixed from this CR-10 tensioner on Thingiverse. It is perfect for the Ender Extender converted Ender 3 (Pro and non-Pro). When you installed the Y-axis tensioner from your Ender Extender kit, they gave you a longer M8 bolt. This kit…
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
Assembly: Insert the inner tube inside the outer tube, place the pencil on the tip and tighten the rear nut until the pencil is held in place.
A simple double-extender for coat hangers. Simple print, no supports required. Parametric design for the thickness of the hanger. Works with wire and plastic coat hangers. Fusion file and 2 .stls for 5mm wire and 9mm plastic hangers. To…
These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…
Made an extender for the bean container for my coffee machine, so i don't need to refill it so often, print in a food grade plastic.
Made this to expand my Cup holder in my 2017 Chevy Colorado and to also hold my Google Pixel 6 Phone Pro while using android auto. I've printed this out of PLA and so far it has held up well in the heat. You will need to print this with…
I did found one similar model, but it was way to small - couldn't push them on extrusion and rubber feet didn't fit also - so I amde my own :) For ender 3 v2 users: remove PSU (black) cover, the PSU will become cooler and then the feets…
Printed it at 0.2 and 60% infill. Took me 1h21 on Ender 2 V2. I used eSun matte pink filament. It nearly matches the pink of the mic.
This is a simple sink faucet extender with a screw. Attach to your sink and screw it on at the desired distance. Great for toddlers, people in a wheelchair, or anyone who finds it useful to have the water flowing a little closer to the…
This is a parameterised model to extend the bean loading capacity for a Breville or Sage espresso machine. Included are both the stl and fusion 360 file. I suspect that this fits all Breville machines, but I could only test it on mine. I…
This is an extender to use with the original cusions to get rid of the ANC mic bump. it will add 4,5mm to each cusion. Print laying flat without supports. I needed to use a small layer-size on the top clips to get a perfect fit.
case for the eachine ev800d fpv goggles, the original model bothered me because it was very ugly, I decided to model a base for the goggles that has an improved look, reuses the straps from the original goggles, you just need to put some…
![[unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1178649/images/8868018_3e4f06c2-c883-4012-9e58-fbac3acf33a3_d3c9d2f1-d15d-488f-bb0a-152d6677cd7c/img_0275-with-labels-retouched.jpeg)
