Counting matching models…
JERRARI3D.com Ryobi Power Tool Holder This holder is designed to secure the majority of hand held power tools in Ryobi's lineup. It can be mounted under a cabinet or workbench as well as vertically screwed into a wall. NEW - GEN2 RYOBI…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for PETGSource material: PET
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I remixed LoboCNC's Gravity Broom Holder to make it compatible with the Ryobi Link system. Printed at .30mm with limited supports using OVERTURE Grass Green PETG. Updated the model on 4/19/2023 to improve the fit of the cleat.
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models. This was remixed from the referenced model to make it sturdily wall mountable. This is a…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
I love my RYOBI 18-volt 3 gallon Wet/Dry Vaccum. It's powerful, yet small. It takes the standard 18V batteries, so there are no cords to worry about. I originally purchased it for my travel trailer, but found I'm using it all over the…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Router dust port designed to fit my Ryobi R163G Router with Fixed Base. Attached via two small machine screws in existing threaded holes. Dust port is sized to fit a normal 2" inner diameter ShopVac hose. Print instructions I designed in…
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for one variant
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
Since we are still waiting for RYOBI's solar products announced in 2021, I thought I would design/build a solar charger for all RYOBI 18V tools. It uses the Victron MPPT solar charge controller and SunPower 50 Watt Flexible…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/615935-usb-c-65w-charger-compatible-with-dual-ryobi-18v This printable adapter allows a single Ryobi 18v…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
There is a bungee cord on the side of the pressure washer but there's nothing to hook it onto. This is a small press-on piece that allows you to roll up the hose (or the cord) and hang it on the side of the pressure washer, then stretch…
Print approx. €1.08–€1.31 excl. taxPreliminary estimate for one variant
I have a very powerful Ryobi Jet Fan Blower... and gutters full of leaves. :) Reviews for the Ryobi gutter cleaner were pretty bad, especially comments about how it couldn't deal with higher volume blowers. Weed Eater sells a nice looking…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
roue avant RYOBI
Print approx. €14.89–€18.20 excl. taxPreliminary estimate for PETGSource material: PET
Holds your Ryobi glue gun to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3 Perimeters - Supports required If the cleat does not sit…
4 x 8 holds up to 32 Ryobi 4v or Ryobi USB Lithium batteries 4 x 4 holds up to 16 Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 15% - Infill pattern Adaptive Cubic - 2…
Print approx. €7.40–€9.04 excl. taxPreliminary estimate for PETGSource material: PET
I hate to admit it, but my sight isn't as good as it use to be. I need to use a lighted magnifier when I work on small things now. I found a nice little 2.25X goose neck LED magnifier. The only problem is it isn't portable. I decided to…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET
Ryobi Router Table RT-800 Throat plates
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This hack enables you to close off the top of the Ryobi Storage Bin. By closing off the tray/bin with a flat worksurface your stuff is secured, and you can add tools (miter saw) to the top of it. You will not have to remove the tool from…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Ryobi Power Tool Battery Holder This holder is designed to hold Ryobi batteries while looking sharp when empty. It's beefed up structure holds the battery at a 45 degree angle, allowing the battery to easily slide into place to become one…
Fitment Note: I only have the Ryobi batteries shown in my photos. Using calipers, I was able to precisely design for those versions, which you'll find have excellent fitment. I'm actively adding new version, however I'm basing them on…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
Made this remix to hold my Ryobi tools - prints in less time.
This is a remix of the design by Claimed4All for a Ryobi 18v battery wall mount. I like the battery mount design, but I needed to change the spacing and layout of the batteries. This single battery mount will work well to attach directly…
Just a Simple Model, Just a Simple Print but sometimes you cant beat a practical print for satisfaction. I printed mine in some PETG lay on the back face and a little support under the overhang. I then screwed them to the wall and hung up…
Ryobi 18v Toolholder with retaining clip. Suitable for most Ryobi 18V handheld tools. Parts can be printed in place if using the same colour. Minimal support needed under the clip and under the housing area where the clip assembles. You…
NOTE: Imported from Thingiverse with minimal updates to description but none to design… I recently purchased a Ryobi 40V weed wacker with expand it capability as my 10 year old gas model was no longer working great. Since I have one more…
EN: Battery holder for Ryobi ONE+ tools. The model was designed with an emphasis on simple and fast printing - the printing time does not take more than 3 hours. For fix use 2 wood screw with diameter 3.5 - 4 mm Printing without supports,…
Easily mount your Ryobi tools, as flat as possible, to a wall No supports version: Top = Great finish / Underside = OK finish at 0.20, Great finish at 0.15 With supports version: Top and Underside = Great finish even at 0.20 Standard…
Check out the Making of Video Here: https://youtu.be/3_A5kDxLI1k This is a custom wall mount for any of the Ryobi ONE+ tools. I screw mine into the ceiling. the integrated spring fingers grip the tool just like the battery does, and since…
TOOL HOLDERS AND PEGS REVISED!! UPDATED Aug 19, 2026 Added battery holder, remixed the excellent holder by Jerrari to add UniPeg slots Replaced Battery Post V4_Curve Down, removing weird void found by user @Glory0_2597396 UPDATED Jan 20,…
A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…
Ryobi Link doesn't have to be expensive! Print your own cleats, and adapt your existing things! This cleat design has gone through several iterations to ensure that it is a perfect match to the slight downward and back angles in the cleat…
The wall mount Ryobi included with their stick vac was pretty pathetic. So, I modeled this up to meet our needs. It holds all the tools that were included with the vac and keeps everything as compact as possible.
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…
ryobi_shaft_protector.stl A protective cover to attach to the battery, protecting the contacts from short circuit. ryobi_shaft_with_contacts.stl A shaft attachment to hold 8mm contacts onto the battery for use in other projects. The…
Multiple options for storing your Ryobi USB Lithium batteries or Inkzall Large Chisel Tip Jobsite Markers… On your workbench On a wall On a Ryobi Link rail Under a shelf …screw mount to any surface, use with a link rail cleat, or screw…
The wall mount that the Ryobi One+ HP 18V vacuum cleaners comes with is too flimsy to be useful so I designed this one. The vacuum simply slides in from the top and it provides a secure, snug fit. It can be mounted with whatever screws…
This Ryobi 18V Battery Connector allows you to power any device or power tool with Ryobi 18V Batteries. This connector can be used as the basis of an adapter to power non Ryobi power tools or to power your electronic projects with Ryobi…
Parkside battery adapter for Ryobi tool. Mixed two pieces of work together, I admit that. Did some modifications so they fit together. You need to print: 1x top 1x bottom 2x clip And extra: 4x 6.3mm Faston male crimp connector, "blue"…
Remix of Claimed4All design "Ryobi Wall Mount 18v Battery Holder Triple" I like the design of this battery mount, but I thought it will be easier to mount if screw hole was between the battery holder insted of bottom of battery holder.…
A wall mount bracket to hang the Ryobi 18V Leaf blower (Model # P2180).
I wanted a wallhanger to hang my Ryobi jig saw. As I couldn't find one I designed one myself. Printed it with Bambulab PLA with 0.2 layerheight, 25% Infill and 3 walls.
Holders for OPT1845 2 pcs OPT1845 31mm Holder 1 pcs OPT1845 Holder for OHT1855R 1 pcs OHT1855R ensure enough perimetes. i used 5 for OHT1855R and OPT1845
I wanted to store my Ryobi tool batteries in a more efficient way, but couldn't find an organizer that I liked...so I made my own. These can be screwed to the underside of a shelf or cabinet, and come in two sizes, "small" ones to fit the…
Print Guide: Before printing, ensure your printer is properly calibrated. Print Time : roughly 4 to 5 hours. (May vary depending on your printer). Filament : PLA/PLA+ (My prints were done with xypolyer PLA+ Black 1.75mm) Infill : At least…
Ryobi Batterymount for vertical and horisontal mounting, snug fit. Fits 1,5 2 2,5 and 5AH batterys
Holder for Ryobi trimmer Print instructions Print in PETG or PLA.
Handful of nozzles for the Ryobi P3240 3 Gallon Wet/Dry Vac. These are created from Zivbot's customizable vacuum tool original scad file (re-uploaded with these files if you want to create your own). To recreate these nozzles:…
I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…
Mount for a Ryobi cordless circular saw designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. I significantly remixed and included the Ryobi circular saw wall mount by…
This is a removable adapter that makes it possible to use Makita batteries on Ryobi tools. It is built on my other Makita battery barrel jack adapter. This was made because Makita does not make a cordless glue gun, and I have no interest…
Tool holder for the ryobi link. I printed some with 40% and some with 50% infill // PETG and .08 nozzle// gyroid infill with Rectilinear top and bottom layers. // with supports on the build plate
Adjusted the hole size and countersink for M5 hardware and added a peg for more stability when mounting to the Ryobi 2 shelf wall mounted cabinet…
Mount for a Ryobi batteries designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. The mount is attached to two Multiboard 9mm Big Thread Shank Head Bolts with 4 mm…
Now you can attach your Ryobi Tools to the IKEA Skadis pegboard. Use a T-Clip System designed originally by Line Arc Line and a bit modified by me (original mounts won't fit this design), to attach the model or Direct screw in T-Nuts by…
This is a lengthened remix of https://www.printables.com/model/395996-ryobi-x-skadis-power-tool-holder. The original would not fit my Ryobi Battery Drill (R18DD3) 18V ONE+. The holder is lengthened by 10mm.
I created this Ryobi Link compatible small bin using the Cleat created by SemaphoreSlim. I plan to create additional variations with dividers and lids. Printed at .03mm. Update: I updated the model to add the feet as well as make some…
If you are doing pegboard stuff, check out the peglock version here
Little wall mount I modeled in Fusion 360 for hanging my Ryobi Circular Saw on the wall in the garage. Might fit other brands and models but designed for a saw sole plate of 130 mm x 250 mm with a roll up lip around the sides that this 75…
ryobi workshop blower nozzle, remixed to bit more gradual. I use to for blowing grass off my golf cart during early and late season rounds. print upright with no supports, should print fine, needs at least 160mm z height.
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
Description Still a prototype design but usable enough to upload so others can get use out of it. Designed to be compatible with the Ryobi Link storage system. Feet on the bottom of the bucket are designed to interface with the recessed…
This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow. It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot…
Print with the top face down with any resolution/layer height. I would recommend printing this with a tough material. To create the pivot point you will need: 1 M5 Screw of your choice 1 M5 Washer 2 M5 Nuts (If you prefer another size all…
v2 This model has been updated to give slightly more clearance at the back of the holder for some tools such as the 18 Gauge Brad Nailer. Version 2 also has slightly bigger holes to work with 6.3mm 1/4" Bolts to go into 20mm spaced Peg…
This an Accessory Rail for the Ryobi Link Lockable Tool Organizer Cabinet, Speed Bench, etc. The accessory doesn’t appear available in the U.S. on its own, so I modeled my own. It prints well at 0.3 layer height without any supports. I…
Mount for a Ryobi battery charger designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. The mount is really simple, it is two custom multiboard snaps with recessed M4…
Large hook compatible with the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.
NOTE: reupload from dieing platform thingiverse Original credits to flyingaz https://www.thingiverse.com/thing:167781 Original post: Figured it was about time I shared something I've made. This is a simple adapter to be able to use your…
Do you have Makita batteries and chargers? Do you want to use cool Ryobi tools? Don't want to spent £20/$25/€22 on Badaptor or Surebonder? Then this is for you! Print instructions This is a proper Makita battery adapter for Ryobi tools.…
This model allows you to hang Ryobi ONE+ 18V tools using the Ryobi Link system. It features a base that can be rotated to accommodate different mounting options. I had trouble finding the official Ryobi version at stores locally, so I…
Organize your drill/driver bit cases using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports. Printed with OVERTURE PETG Filament (Grass Green).
Logos for Milwaukee, Ryobi, Festool and Makita Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
Remixed this Ryobi battery holder to use Multiboard 9mm, small thread flat head t-bolts, rather than screws. Needle nose pliers were helpful to screw the t-bolts into the board.
Update 2024/11/01: Added some new file versions for coarse or regular M3 size screws without requiring heatsets. Update 23/11/06: Added “Rev2” versions of interface, shell, and cap files. These are mostly minor updates to clean up the…
The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…
A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed. It is printed with 75% infill modifier block to reinforce the screw clearance holes.
I had a dead Dyson battery in my V8 Absolute stick vacuum for a second time. Rather than buy a replacement battery (o a replacement vacuum), I created these printer parts so the Dyson could use Ryobo one+ 18V batteries. The result? It…
Simple bit holder (x3) for Ryobi impact driver. Can be screwed in one of the holes made for the belt clip. You just need to find the compatible screw. It's made for the right side of the tool but if you print it mirored it can work for…
blower nozzle for the Ryobi 18v leaf blower so I can use it to blow snow off my driveway and vehicle.
Supersimple print. I used PETG, 5 perimeters, 0,2 layers.
The bit that hits the ground on a Ryobi one+18v line trimmer. Means I can bash/grind it against the ground without without worrying about replacing it best printed in abs/nylon for temperature/wear resistance Print Settings Printer Brand:…
This is a ryobi tool (drill, multitool, impact driver router, others) holder for HSW
Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…
There are already lots of versions of this style of tool holder floating around, but I got tired of; wasting filament printing a big empty box not having a thick enough base to taper the mount for different angles hard to access recessed…
Organize rolls of tape! I created a base plate for the Modular Tape Storage model that is compatible with the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Dowel segments and hangers available in…
I have a bunch of different Ryobi 18V Power tools and an assortment of One+ Lithium batteries. I thought it would be great to make use of these batteries for other things. I decided to make a Power station that could charge USB devices…
A collection of holder and base pairs that I use to mount my Ryobi 18V tools on Slatwall. This makes your tools easily accessible and allows you to show off your collection as well. These are very similar to the other models I used to use…
Fits the Ryobi P7131 Vac. Made this to reach into the extrusions and behind my printer to suck up filament strings. Works great and fits the vac right off the bed. Easily printed flat with no supports and 20%+ infill. Has a tiny section…
Track Saw guide for using a Ryobi Trim Router on a Makita/Festool-style Track. You'll need supports for the side that connects to the track guide, I used supports just on the lowest two horizontal surfaces, leaving the top to bridge…
I needed to cut some copper rods for a Yagi antenna I'm building. I found GreaseMonkey88's nice design and adapted it for my RYOBI rotary tool and IRWIN clamps. I need to make an arm that fits my RYOBI flexible Rotary Tool head. It's a…
Mount for a Ryobi cordless drill designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. The mount is attached to four Multiboard 9mm Big Thread Shank Head Bolts with 4…
Standard pegboard (25.4mm) battery post style mounts for additional Ryobi Power Tools beyond what @theamzngq provided here , which is remixed from @AimeBuilder_329593's Universal Peg Board Peg System . Pegs are the version from…
Ryobi link rail system, these are individual sections so the length you can go is upto you, if you are doubling up the rails keep in mind that up must print as section 1 2 3 as the files are labelled, this is due to the pattern of the…
Updated the model to allow for easier removal of the screwdrivers. Organize your screwdrivers using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports.
![Small Parts Bin Compatible with the Ryobi Link System [Prototype]](https://media.printables.com/media/prints/233897/images/2123283_5c804aa8-d15e-4242-8fac-1b2418603469/r-link-bucket-cover.png)
