Adjustable LED Light Arm for 10mm x 50m LED Strip Sections
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adjustable LED lamp that is large enough to accommodate two sections of a 5050 LED strip that measure 10mm…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adjustable LED lamp that is large enough to accommodate two sections of a 5050 LED strip that measure 10mm x 50mm each (totaling 10mm x 100mm together). This is six LEDs.
Hardware: You will need two to three 12mm long M3 screws, and two to three 2.2mm thick M3 nuts (depending on the number of points of articulation you choose). I used cheese head screws. The mount attaches to the printer with the screw that came with the printer.
LED Arm Options: There are two of these that you can choose to print from. Light-LED_Arm.stl requires you to print Light-Angle_Connector.stl to attach to the connector arm, and gives you an extra point of articulation. If you decide that you don't need this extra movement, you can simply print Light-LED_Arm-With_Angle_Connector.stl.
Connector Arm Options: There are two of these that you can choose to print from: a honeycomb pattern or a triangle pattern.
Knobs: Print the knobs separately from all other parts. You will need to pause the print part way through so that you can insert M3 nuts, and then continue the print.